KLA CORP
10-Qs and 10-Ks
PROXIES
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
|
FORM 10-K
|
(Mark One)
|
x
|
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
|
|
For the Fiscal Year Ended June 30, 2019
|
|
OR
|
o
|
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
|
|
For the Transition Period from to
|
|
Commission File Number 000-09992
KLA CORPORATION
(Exact name of registrant as specified in its charter)
|
Delaware
|
|
04-2564110
|
|
(State or other jurisdiction of
incorporation or organization)
|
|
(I.R.S. Employer
Identification Number)
|
|
One Technology Drive, Milpitas, California
|
|
95035
|
|
(Address of Principal Executive Offices)
|
|
(Zip Code)
|
Registrant’s Telephone Number, Including Area Code: (408) 875-3000
Securities Registered Pursuant to Section 12(b) of the Act:
|
Title of Each Class
|
Trading Symbol(s)
|
Name of Each Exchange on Which Registered
|
|
Common Stock, $0.001 par value per share
|
KLAC
|
The Nasdaq Stock Market, LLC
|
|
The NASDAQ Global Select Market
|
||
|
Securities Registered Pursuant to Section 12(g) of the Act:
|
||
|
None
|
||
|
(Title of Class)
|
||
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes
x
No
o
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes
o
No
x
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes
x
No
o
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes
x
No
o
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.
o
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.
|
Large accelerated filer
x
|
Accelerated filer
o
|
|||
|
Non-accelerated filer
o
|
(Do not check if a smaller reporting company)
|
Smaller reporting company
o
|
||
|
Emerging growth company
o
|
||||
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.
¨
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes
o
No
x
The aggregate market value of the voting and non-voting common stock held by non-affiliates of the registrant based upon the closing price of the registrant’s stock, as of
December 31, 2018
, was approximately
$13.53 billion
.
The registrant had
159,255,950
shares of common stock outstanding as of
July 19, 2019
.
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the Proxy Statement for the
2019
Annual Meeting of Stockholders (“Proxy Statement”), and to be filed pursuant to Regulation 14A within 120 days after the registrant’s fiscal year ended
June 30, 2019
, are incorporated by reference into Part III of this report.
INDEX
|
|
|||
|
PART I
|
|||
|
Item 1.
|
|
||
|
Item 1A.
|
|
||
|
Item 1B.
|
|
||
|
Item 2.
|
|
||
|
Item 3.
|
|
||
|
Item 4.
|
|
||
|
PART II
|
|||
|
Item 5.
|
|
||
|
Item 6.
|
|
||
|
Item 7.
|
|
||
|
Item 7A.
|
|
||
|
Item 8.
|
|
||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
Item 9.
|
|
||
|
Item 9A.
|
|
||
|
Item 9B.
|
|
||
|
PART III
|
|||
|
Item 10.
|
|
||
|
Item 11.
|
|
||
|
Item 12.
|
|
||
|
Item 13.
|
|
||
|
Item 14.
|
|
||
|
PART IV
|
|||
|
Item 15.
|
|
||
|
|
|||
|
|
|||
|
|
|||
|
Item 16.
|
|||
i
SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS
This report contains certain forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. All statements other than statements of historical fact may be forward-looking statements. You can identify these and other forward-looking statements by the use of words such as “may,” “will,” “could,” “would,” “should,” “expects,” “plans,” “anticipates,” “relies,” “believes,” “estimates,” “predicts,” “intends,” “potential,” “continue,” “thinks,” “seeks,” or the negative of such terms, or other comparable terminology. Forward-looking statements also include the assumptions underlying or relating to any of the foregoing statements. Such forward-looking statements include, among others, forecasts of the future results of our operations, including profitability; orders for our products and capital equipment generally; sales of semiconductors; the investments by our customers in advanced technologies and new materials; the allocation of capital spending by our customers (and, in particular, the percentage of spending that our customers allocate to process control); growth of revenue in the semiconductor industry, the semiconductor capital equipment industry and our business; technological trends in the semiconductor industry; future developments or trends in the global capital and financial markets; our future product offerings and product features; the success and market acceptance of new products; timing of shipment of backlog; our future product shipments and product and service revenues; our future gross margins; our future research and development expenses and selling, general and administrative expenses; our ability to successfully maintain cost discipline; international sales and operations; our ability to maintain or improve our existing competitive position; success of our product offerings; creation and funding of programs for research and development; attraction and retention of employees; results of our investment in leading edge technologies; the effects of hedging transactions; the effect of the sale of trade receivables and promissory notes from customers; our future effective income tax rate; our recognition of tax benefits; the effects of any audits or litigation; future payments of dividends to our stockholders; the completion of any acquisitions of third parties, or the technology or assets thereof; benefits received from any acquisitions and development of acquired technologies; sufficiency of our existing cash balance, investments, cash generated from operations and the unfunded portion of our revolving line of credit under a Credit Agreement (the “Credit Agreement”) to meet our operating and working capital requirements, including debt service and payment thereof; future dividends, and stock repurchases; our compliance with the financial covenants under the Credit Agreement; the adoption of new accounting pronouncements including ASC 606; the tax liabilities resulting from the enactment of the Tax Cuts and Jobs Act; and our repayment of our outstanding indebtedness.
Our actual results may differ significantly from those projected in the forward-looking statements in this report. Factors that might cause or contribute to such differences include, but are not limited to, those discussed in Item 1A, “Risk Factors” in this Annual Report on Form 10-K, as well as in Item 1, “Business” and Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in this report. You should carefully review these risks and also review the risks described in other documents we file from time to time with the Securities and Exchange Commission, including the Quarterly Reports on Form 10-Q that we will file in the fiscal year ending
June 30, 2020
. You are cautioned not to place undue reliance on these forward-looking statements, and we expressly assume no obligation and do not intend to update the forward-looking statements in this report after the date hereof.
ii
PART I
|
ITEM 1.
|
BUSINESS
|
The Company
KLA Corporation (“KLA” or the “Company” and also referred to as “we” or “our”) is a leading supplier of process equipment, process control equipment, and data analytics products for a broad range of industries, including semiconductors, printed circuit boards and displays. We provide advanced process control and process-enabling solutions for manufacturing and testing wafers and reticles, integrated circuits (“IC” or “chip”), packaging, light emitting diodes, power devices, compound semiconductor devices, microelectromechanical systems, data storage, printed circuit boards and flat and flexible panel displays, as well as general materials research.
On February 20, 2019, we completed the acquisition of Orbotech, Ltd. (“Orbotech”) for a total purchase consideration of approximately
$3.26
billion. For additional details, refer to Note 6 “Business Combinations” to our Consolidated Financial Statements. Orbotech’s core business enables electronic device manufacturers to inspect, test and measure printed circuit boards and flat panel displays to verify their quality; pattern electronic circuitry on substrate and perform three-dimensional shaping of metalized circuits on multiple surfaces; and utilize advanced vacuum deposition and etching process in semiconductor device and semiconductor manufacturing and to perform laser drilling of electronic substrates.
Subsequent to the acquisition of Orbotech, we changed our organizational structure, resulting in four reportable segments: Semiconductor Process Control; Specialty Semiconductor Process; PCB, Display and Component Inspection; and Other.
Within the Semiconductor Process Control segment, our comprehensive portfolio of inspection, metrology and data analytics products, and related service helps integrated circuit manufacturers achieve target yield throughout the entire semiconductor fabrication process—from research and development (“R&D”) to final volume production. Our differentiated products and services are designed to provide comprehensive solutions that help our customers accelerate development and production ramp cycles, achieve higher and more stable semiconductor die yields and improve their overall profitability.
In the Specialty Semiconductor Process segment, we develop and sell advanced vacuum deposition and etching process tools, which are used by a broad range of specialty semiconductor customers, including manufacturers of microelectromechanical systems (“MEMS”), radio frequency (“RF”) communication chips, and power semiconductors for automotive and industrial applications.
In the PCB, Display and Component Inspection segment, we enable electronic device manufacturers to inspect, test and measure printed circuit boards (“PCBs”) and flat panel displays (“FPDs”) and ICs to verify their quality, pattern the desired electronic circuitry on the relevant substrate and perform three-dimensional shaping of metalized circuits on multiple surfaces.
Our advanced products, coupled with our unique yield management services, allow us to deliver the solutions our semiconductor, printed circuit board and display customers need to achieve their productivity goals, by significantly reducing their risks and costs.
Certain industry and technical terms used in this section are defined in the subsection entitled “Glossary” found at the end of this Item 1.
KLA (then KLA-Tencor) was formed in April 1997 through the merger of KLA Instruments Corporation and Tencor Instruments, two long-time leaders in the semiconductor equipment industry that began operations in 1975 and 1976, respectively.
Additional information about KLA is available on our website at www.kla.com. Our Annual Report on Form 10-K, our Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, are available free of charge on our website as soon as reasonably practicable after we electronically file them with or furnish them to the Securities and Exchange Commission (“SEC”). Information contained on our website is not part of this Annual Report on Form 10-K or our other filings with the SEC. Additionally, these filings may be obtained through the SEC’s website (www.sec.gov), which contains reports, proxy and information statements, and other information regarding issuers that file electronically.
1
Investors and others should note that we announce material financial information to our investors using our investor relations web site (
ir.kla.com
), SEC filings, press releases, public conference calls and webcasts. We use these channels as well as social media to communicate with the public about our company, our products and services and other matters. It is possible that the information we post on social media could be deemed to be material information. Therefore, we encourage investors, the media, and others interested in our company to review the information we post on the social media channels listed on our investor relations website.
Industry
General Background
KLA’s core focus is the semiconductor industry. The semiconductor fabrication process begins with a bare silicon wafer—a round disk that is typically 200 millimeters or 300 millimeters in diameter, about as thick as a credit card and gray in color. The process of manufacturing wafers is highly sophisticated, involving the creation of large ingots of silicon by pulling them out of a vat of molten silicon. The ingots are then sliced into wafers. Prime silicon wafers are then polished to a mirror finish. Other, more specialized wafers, such as epitaxial silicon (“epi”), silicon on insulator (“SOI”), gallium nitride (“GaN”) and silicon carbide (“SiC”) are also common in the semiconductor industry.
The manufacturing cycle of an IC is grouped into three phases: design, fabrication and testing. IC design involves the architectural layout of the circuit, as well as design verification and reticle generation. The fabrication of a chip is accomplished by depositing a series of film layers that act as conductors, semiconductors or insulators on bare wafers. The deposition of these film layers is interspersed with numerous other process steps that create circuit patterns, remove portions of the film layers, and perform other functions such as heat treatment, measurement and inspection. Most advanced chip designs require hundreds of individual steps, many of which are performed multiple times. Most chips consist of two main structures: the lower structure, typically consisting of transistors or capacitors which perform the “smart” functions of the chip; and the upper “interconnect” structure, typically consisting of circuitry which connects the components in the lower structure. When the layers on the wafer have been fabricated, each chip on the wafer is tested for functionality. The wafer is then cut into individual chips, and the chips that pass functional testing are packaged. Final testing is performed on all packaged chips. Packaged chips are mounted onto printed circuit boards (“PCBs”) for connection to the outside world. Additionally, flat panel displays are manufactured using processes similar to ICs (e.g., film deposition, photolithography, etching) except using glass as the starting substrate.
The semiconductor equipment industry is currently experiencing growth from multiple drivers, such as demand for chips providing computational power and connectivity for Artificial Intelligence (“AI”) applications and continued need for chips from leading edge foundry and logic chip manufacturers that support mobile devices. Qualification of early extreme ultraviolet (“EUV”) lithography processes and equipment is driving growth at leading logic/foundry and dynamic random-access memory (“DRAM”) manufacturers. Expansion of the Internet of Things (“IoT”) together with the increasing adoption of electrical vehicles and the need for automobile connectivity are accelerating trailing-edge node technology conversions and capacity expansions. Intertwined in these areas, spurred by data storage and connectivity needs, is the growth in demand for memory chips. Finally, China is emerging as a major region for manufacturing of logic and memory chips, adding to its role as the world’s largest consumer of ICs. Government initiatives are propelling China to expand its domestic manufacturing capacity and attracting semiconductor manufacturers from Taiwan, Korea, Japan and the US. China is currently seen as an important long-term growth region for the semiconductor capital equipment sector.
Supporting this multi-segmented market growth, the semiconductor industry continues to introduce numerous technology changes. New techniques and architectures in production today include three dimensional finFET transistors; three dimensional flash memory (“3D NAND”); design technology co-optimization (“DTCO”); advanced patterning technologies, including self-aligned multiple patterning and EUV lithography; and advanced packaging methods. KLA’s inspection, metrology and data analytics technologies play key roles in enabling our customers to develop and manufacture advanced semiconductor devices to support these trends.
Companies that anticipate future market demands by developing and refining new technologies and manufacturing processes are better positioned to lead in the semiconductor market. Accelerating the yield ramp and maximizing production yields of high-performance devices are key goals of modern semiconductor manufacturing. Ramping to high volume production ahead of competitors can dramatically increase the revenue an IC manufacturer realizes for a given product. During past industry cycles, semiconductor manufacturers generally contended with a few key new technologies or market trends, such as a specific design rule shrink. Today, leading semiconductor manufacturers are investing in simultaneous production integration of multiple new process technologies, some requiring new substrate and film materials, new geometries, advanced multi-patterning and EUV lithography and packaging techniques. While many of these technologies have been adopted at the development and pilot production stages of chip manufacturing, significant challenges and risks associated with each technology have affected the adoption of these technologies into full volume production. For example, as design rules decrease,
2
yields become more sensitive to the size and density of defects, and device performance characteristics (namely speed, capacity or power management) become more sensitive to parameters such as linewidth and film thickness variation. New process materials, such as photoresists for EUV lithography, require extensive characterization before they can be used in the manufacturing process. Moving several of these advanced technologies into production at once only adds to the risks that chipmakers face.
The continuing evolution of semiconductor devices to smaller geometries and more complex multi-level circuitry has significantly increased the performance and cost requirements of the capital equipment used to manufacture these devices. Construction of an advanced wafer fabrication facility today can cost well above $5.00 billion, substantially more than previous-generation facilities. In addition, chipmakers are demanding increased productivity and higher returns from their manufacturing equipment and are also seeking ways to extend the performance of their existing equipment.
By developing new process control and yield management tools that help chipmakers accelerate the adoption of these new technologies into volume production, we enable our customers to better leverage these increasingly expensive facilities and improve their return on investment (“ROI”). Once customers’ production lines are operating at high volume, our systems help ensure that yields are stable and process excursions are identified for quick resolution. In addition, the move to each new generation’s smaller design rules, coupled with new materials and device innovation, has increased in-process variability, which requires an increase in inspection and metrology sampling.
KLA systems not only analyze defectivity and metrology issues at critical points in the wafer, reticle and IC manufacturing processes, but also provide information to our customers so that they can identify and address the underlying process problems. The ability to locate the source of defects and resolve the underlying process issues enables our customers to improve control over their manufacturing processes. This helps them increase their yield of high-performance parts and deliver their products to market faster—thus maximizing their profits. With our broad portfolio of application-focused technologies and our dedicated yield technology expertise, we are in position to be a key supplier of comprehensive yield management solutions for customers’ next-generation products, helping our customers respond to the challenges posed by shrinking device sizes, the transition to new production materials, new device and circuit architectures, more demanding lithography processes, and new packaging techniques.
With the Orbotech acquisition, KLA has expanded its presence in the semiconductor capital equipment market, leveraging products and technologies of Orbotech’s SPTS semiconductor processing business. SPTS develops and sells differentiated custom deposition and etching solutions for fast-growing markets, such as power and analog devices, RF communication chips and MEMS. These devices, which are often built on non-traditional substrates, like SiC and GaN, have become critical to accelerating some of the secular trends in automotive, industrial and communication industries. Infrastructure build-out for 5G is creating demand for RF components; new SiC and GaN based power devices are moving into volume production for electric vehicles; and high-density packaging is growing to support AI.
The acquisition of Orbotech has also allowed KLA to enter the PCB fabrication market, providing a comprehensive portfolio of tools, services and solutions to accelerate technology transitions and production ramp. Our portfolio includes inline inspection tools to monitor the quality of printed circuit board fabrication, equipment to repair defective boards, digital imaging technologies to print fine geometry according to the design, and computer aided manufacturing (“CAM”) software. Growth in the PCB business is driven mainly by investments in 5G technology and its supporting applications: smartphones, smart vehicles, AI and cloud servers/high performance computing. These applications will be based on several technological segments including flexible printed circuits (“FPCs”), high density interconnect (“HDI”), PCBs, and IC substrates.
The acquisition of Orbotech has also allowed KLA to enter the flat panel display market, providing complete yield management solutions, including automated optical inspection systems, repair technologies and electrical testers. An accelerated transition to organic light emitting diode (“OLED”) displays to serve the mobile market, introduction of OLED technology for large size TVs, and a steep ramp in liquid crystal display (“LCD”) production for televisions in China are driving the flat panel display business. New technologies, such as microLED, also represent a growth opportunity for KLA in the display market.
Products
KLA develops industry-leading equipment and services that enable innovation throughout the electronics industry. We provide advanced process control and process-enabling solutions for manufacturing wafers, reticles, integrated circuits, packaging, printed circuit boards, and flat and flexible panel displays.
3
KLA’s inspection, metrology and data analytics products and related offerings can be broadly categorized as supporting customers in the following groups: Chip and Wafer Manufacturing; Reticle Manufacturing; Packaging Manufacturing; Compound Semiconductor and Hard Disk Drive Manufacturing; and General Purpose/Lab Applications. Orbotech’s inspection, repair, imaging, laser drilling, electrical testing and wafer processing equipment support customers in Printed Circuit Board Manufacturing, Flexible and Flat Panel Display Manufacturing, Advanced Packaging Manufacturing, and manufacturing of semiconductor devices such as MEMS, LEDs, high speed RF IC devices and power semiconductors. Some of the company’s more significant products are described below and also included in the broader product table at the end of this “Products” section.
Semiconductor Process Control:
Chip and Wafer Manufacturing
KLA’s comprehensive portfolio of defect inspection, review, metrology, patterning simulation, in situ process monitoring and data analytics products, and related service, software and other offerings, helps substrate and chip manufacturers manage yield throughout the wafer and chip fabrication processes, from research and development to final volume production. These offerings are designed to provide comprehensive solutions to help our customers accelerate their development and production ramp cycles, achieve higher and more stable semiconductor die yields, and improve their overall profitability.
Defect Inspection and Review
KLA’s wafer defect inspection and review systems cover a broad range of yield applications for IC and substrate manufacturers, including research and development, wafer qualification, reticle qualification, and tool, process and line monitoring. Patterned and unpatterned wafer inspectors find particles, pattern defects and electrical issues on the front surface, back surface and edge of the wafer, allowing engineers to detect and monitor critical yield excursions. Our defect review systems capture high resolution images of the defects detected by inspection tools, helping substrate manufacturers and chipmakers identify and resolve yield issues. Fabs rely on our high sensitivity reticle inspection systems to identify defects on reticles at an early stage and to prevent reticle defects from printing on production wafers. By implementing our defect inspection and review systems, chipmakers and substrate manufacturers are able to take quick corrective action, resulting in faster yield improvement and better time to market.
For patterned wafer optical inspection, we provide our 3920 Series, 3900 Series, 2950 Series, 2930 Series, 2920 Series, 2910 Series and 2900 Series (high resolution broadband plasma defect inspection for defect discovery, yield learning and inline monitoring across all advanced node layers); the Voyager 1015 (laser scanning patterned wafer inspection system that provides enhanced defect capture for high throughput lithography cell monitoring); the Puma 9980 Series, Puma 9850 Series and Puma 9650 Series (laser scanning defect inspection); our 8 Series systems (high productivity defect inspection); and our CIRCL cluster tool (defect inspection, review and metrology of all wafer surfaces – front side, edge and backside).
In the field of unpatterned wafer and surface inspection, the Surfscan SP7 unpatterned wafer defect inspection system provides high sensitivity on bare wafers, smooth films and rough films, supporting development and production of advanced substrates, processes and devices at wafer shops, original equipment manufacturers (“OEMs”) and IC fabs. In addition, we offer the Surfscan SP5 Series and Surfscan SP3 Series (wafer defect inspection systems for process tool qualification and monitoring using blanket films and bare wafers); and SURFmonitor, which enables surface quality measurements and capture of low-contrast defects. For wafer manufacturers, these specialized inspection systems assess surface quality and detect, count and bin defects during the development and production monitoring of polished wafers, epi wafers and engineered substrates, and as a critical part of outgoing inspection. For chip manufacturers, the Surfscan systems qualify incoming bare wafers, and qualify and monitor processes during all manufacturing stages – from development through production.
Our eDR7380 high performance electron-beam (e-beam) wafer defect review and classification system produces a comprehensive defect pareto in one test for accurate defect sourcing and faster excursion detection during production. Unique synergy with our inspectors facilitates accurate identification and classification of patterned wafer, bare wafer and bevel edge defects for faster yield learning during IC and wafer manufacturing.
For in-fab reticle qualification, we offer the Teron SL650 Series and X5.3 reticle inspection systems. These inspectors allow IC fabs to qualify incoming reticles and inspect production reticles for contaminants and other process-related changes. The Teron SL655 reticle inspection system enables IC manufacturers to assess incoming reticle quality, monitor reticle degradation and detect yield-critical reticle defects. The Teron SL655 introduced STAR
light
Gold technology, which provides a golden reference to maximize detection of defects critical to the mask requalification process.
4
Metrology
KLA’s array of metrology solutions addresses IC and substrate manufacturing, as well as scientific research and other applications. Precise metrology and control of pattern dimensions, film thicknesses, layer-to-layer alignment, pattern placement, surface topography, electro-optical and electromagnetic properties are important in many industries as critical dimensions narrow, film thicknesses shrink to countable numbers of atomic layers and devices become more complex.
The Archer Series of imaging-based overlay metrology systems enable characterization of overlay error on lithography process layers for advanced patterning technologies. The ATL Series of scatterometry-based overlay metrology systems utilize tunable laser technology to automatically maintain highly accurate and robust overlay error measurements in the presence of process variations, supporting fast technology ramps and wafer disposition during production.
The SpectraShape optical CD and shape metrology systems characterize and monitor the critical dimensions and 3D shapes of geometrically complex features incorporated by some IC manufacturers into their latest generation devices. The SpectraShape 10K metrology system measures the CDs and three-dimensional shapes of finFET, 3D NAND and other complex IC device structures following etch, chemical mechanical planarization (“CMP”) and other process steps.
The SpectraFilm and Aleris film metrology systems provide precise measurement of film thickness, refractive index, stress and composition for a broad range of film layers. The SpectraFilm F1 film metrology system, employs optical technologies that determine single- and multi-layer film thicknesses and uniformity with high precision to monitor deposition processes in production, and deliver bandgap data that predict device electrical performance earlier than end of line test.
The PWG3 patterned wafer geometry metrology system measures stress-induced wafer shape, wafer shape-induced pattern overlay errors, wafer thickness variations and wafer front side and backside topography for a wide range of IC processes. This data is used for inline monitoring of fab processes, overlay corrections and scanner focus control, enabling improved patterning and faster yield ramp. Our WaferSight bare wafer geometry metrology systems are used by substrate manufacturers to qualify polished and epitaxial silicon wafers, and engineered and other advanced substrates.
Magnetic random-access memory (“MRAM”) manufacturing requires the control of deposition, annealing, magnetization and etch of very thin ferromagnetic layers. These memory cells are embedded into the logic chip when the chip is getting close to completion. At this late stage, the value of the chip is high so the MRAM cell must be carefully controlled to maintain high yield. KLA offers several systems for manufacturing control of MRAM processes, including the CAPRES CIPTech and microHall series, and the MicroSense PKMRAM and KerrMapper systems.
In Situ Process Monitoring
KLA’s SensArray systems are a portfolio of advanced wireless and wired wafers and reticles that enable in situ monitoring of the production process environment. These sensor wafers and reticles provide insight into critical process parameters, such as thermal uniformity, profile temperature and light intensity, under real production conditions. For example, the EtchTemp
in situ wafer temperature measurement systems measure the effect of the plasma etch process environment on production wafers. By characterizing thermal conditions that closely represent product wafer conditions, the EtchTemp SE wireless wafer assists process engineers with tuning of the etch process conditions and the qualification, matching and post-PM verification of front end of line plasma etch chambers. The AMW product (Automation Metrology Wafer) enables fab-wide automated wafer handling monitoring. The SensArray Automation package provides fast automated collection of parametric measurement within the process tool chamber. SensArray products are used for many semiconductor and flat panel display fabrication processes, including lithography, etch and deposition, and for reticle manufacturing, including e-beam mask writer qualification and process monitoring.
Patterning Simulation
KLA’s PROLITH computational lithography software is used by researchers at advanced IC manufacturers, lithography hardware suppliers, track companies and material providers to explore critical feature designs, manufacturability and process-limited yield of proposed lithographic and patterning technologies without the time and expense of printing hundreds of test wafers using experimental materials and prototype process equipment.
5
Data Analytics
The data generated by our inspection, metrology and in situ process monitoring systems are compiled and reduced to relevant root cause and yield analysis information with our suite of data analytics and management tools.
Our 5D Analyzer advanced data analysis and patterning control system offers an extendible, open architecture that accepts data from a wide range of metrology and process tools to enable advanced analysis, characterization and real-time control of fab-wide process variations. Our Klarity automated defect and yield analysis systems help IC manufacturers reduce defect inspection, classification and review data to relevant root-cause and yield-analysis information. Our RDC reticle data analysis and management system provides data used for in-fab reticle qualification. Our FabVision data management system offers fab-wide data management and automated yield analysis for wafer manufacturers.
Reticle Manufacturing
Error-free reticles, or masks, are necessary to achieve high semiconductor device yields, since reticle defects can be replicated in every die on production wafers. KLA offers high sensitivity reticle inspection, metrology and data analytics systems for mask blank manufacturers and reticle manufacturers (“mask shops”) to help them manufacture reticle blanks and patterned reticles that are free of defects and meet pattern placement and critical dimension uniformity specifications.
The FlashScan reticle blank inspection product line is used by blank manufacturers for defect control during process development and volume manufacturing, and by mask shops for incoming inspection, tool monitoring and process control.
The Teron 640e reticle inspection system incorporates advanced optical, detector and algorithm technologies that detect critical pattern and particle defects at high throughput, advancing the development and qualification of EUV and optical patterned reticles in leading-edge mask shops. Our reticle inspection portfolio also includes the Teron 600 Series for development and manufacturing of advanced optical and EUV masks, the TeraScan 500XR system for production of reticles for the 32nm node and above, and our X5.3 and Teron SL650 Series products for reticle quality control at IC fabs.
In addition, we offer the LMS IPRO Series of reticle registration metrology systems for measuring mask pattern placement error. If the pattern on the reticle is displaced from its intended location, overlay error can result on the wafer, which can lead to electrical continuity issues affecting yield, performance or reliability of the IC device. The LMS IPRO7 reticle registration metrology system accurately measures on-device reticle pattern placement error with fast cycle time, enabling comprehensive reticle qualification for e-beam mask writer corrections and reduction of reticle-related contributions to device overlay errors in the IC fab.
RDC is a comprehensive data analysis and storage platform that supports multiple KLA reticle inspection and metrology platforms for mask shops and IC fabs.
Packaging Manufacturing
KLA offers standalone and cluster inspection and metrology systems for various applications in the field of semiconductor packaging.
Wafer-Level Packaging Inspection/Metrology
For wafer-level packaging inspection, the Kronos system provides high sensitivity to critical defects for advanced wafer-level packaging production monitoring for processes such as 2.5D/3D IC integration using through silicon vias (“TSVs”), wafer-level chip scale packaging (“WLCSP”) and fan-out wafer-level packaging (“FOWLP”). We also offer our CIRCL-AP cluster tool, which features multiple modules to support all-surface wafer-level packaging inspection, metrology and review. Used for packaging applications associated with LEDs, MEMS, image sensors and flip-chip packaging, our WI-2280 products focus on front side wafer inspection and provide feedback on wafer surface quality, quality of the wafer dicing, or quality of wafer bumps, pads, pillars and interconnects. Zeta-5xx and Zeta-6xx optical surface profilers measure both wafers and large panels for packaging metrology applications. These applications include under-bump metallization (“UBM”) height and roughness, copper pillar height and roughness, and redistribution layer (“RDL”) height and width.
6
Compound Semiconductor, Power Device, LED and MEMS Manufacturing
The compound semiconductor market comprises a diverse group of applications including power devices, radio frequency (“RF”) communications devices, photonics, LED lighting and photovoltaic and display markets. Our primary products for compound semiconductor manufacturing include the Candela 8520, Candela CS20, 8 Series and WI-2280 inspection systems, MicroXAM and Zeta optical profilers, and the P-Series and HRP-Series stylus profilers. These products are used for the inspection and metrology of substrates, epitaxial (“epi”) layers and process films.
Leading power device manufacturers are targeting faster development and ramp times, high product yields and lower device costs. To achieve these goals, they are implementing solutions for characterizing yield-limiting defects and processes. Full-surface, high sensitivity defect inspection and profiler metrology systems provide accurate process feedback, enabling improvements in SiC substrate quality and optimal epitaxial growth yields on both SiC epi and GaN-on-silicon processes.
KLA offers inspection and metrology systems to support power device manufacturing. The Candela 8520 inspection system integrates surface defect detection and photoluminescence technology for inspection and classification of a wide range of defects on SiC substrates and epi layers. The MicroXAM optical profilers measure step height, texture and form for power device applications. The P-Series and HRP-Series stylus profilers measure step heights and roughness for SiC substrates and patterned wafer applications.
LEDs are becoming more commonly used in solid state lighting, television and notebook backlighting, and automotive applications. As LED device makers target aggressive cost and performance targets, they place significant emphasis on improved process control and yield during the manufacturing process.
KLA offers a portfolio of systems to help LED manufacturers reduce production costs and increase product output: Candela 8720, WI-2280, 8 Series, UltraMap, MicroXAM and Zeta optical profilers and P-Series and HRP-Series stylus profilers. The Candela 8720 substrate and epi wafer inspection system provides automated inspection and quality control of LED substrates, detecting defects that can impact device performance, yield and field reliability. The WI-2280 system is designed specifically for defect inspection and 2D metrology for LED applications. The 8 Series provides patterned wafer defect inspection capability for LED manufacturing. UltraMap provides wafer geometry measurements on sapphire wafers. The MicroXAM and Zeta optical profilers measure step height, texture and form for LED applications. The P Series and HRP-Series stylus profilers are metrology systems for measurement of step heights and roughness for LED substrates and patterned wafer applications. The Zeta-388 measures patterned sapphire substrates (“PSS”) and inspects for defects on high brightness LED substrates.
KLA offers a variety of products for the display market, including the ZetaScan Series defect inspector, SensArray Process Probe 2070, Zeta-300 optical profiler, P-17 OF stylus profiler, and the Nano Indenter nanomechanical tester.
The increasing demand for MEMS technology is coming from diverse industries such as automotive, space and consumer electronics. MEMS have the potential to transform many product categories by bringing together silicon-based microelectronics with micromachining technology, making possible the realization of complete systems-on-a-chip. KLA offers tools and techniques such as defect inspection and review, optical inspection and surface profiling for this emerging market, as highlighted in the product table at the conclusion of this “Products” section.
Data Storage Media/Head Manufacturing
Advancements in data storage are being driven by a wave of innovative consumer electronics with small form factors and immense storage capacities, as well as an increasing need for high-volume storage options to support remote computing and networking, such as cloud computing. Our process control and yield management solutions are designed to enable customers to rapidly understand and resolve complex manufacturing problems, which can help improve time to market and product yields. To support manufacturing of substrates, media and thin film head wafers, we offer a portfolio of metrology and defect inspection solutions, as highlighted in the product table at the conclusion of this “Products” section.
General Purpose/Lab Applications
A range of industries, including general scientific and materials research and optoelectronics, require measurements of surface topography and film thickness, to either control their processes or research new material characteristics. Typical surface metrology parameters that our tools address include flatness, roughness, curvature, peak-to-valley, asperity, waviness, texture, volume, sphericity, slope, density, stress, hardness, bearing ratio and step height (mainly in the micron to nanometer range). Film thickness measurements can also include determination of refractive index. We also offer a portfolio of high-throughput nanomechanical testers for material characterization, including hardness, modulus and adhesion.
7
Previous-Generation KLA Systems
Our KLA Pro group provides fully refurbished systems, remanufactured legacy systems, and enhancements and upgrades for previous-generation KLA systems. When a customer needs to move to the next manufacturing node, KLA’s Pro offerings can help maximize the value of the customer’s existing assets.
Specialty Semiconductor Process:
SPTS Technologies, a wholly-owned subsidiary of KLA, designs, manufactures and markets wafer processing solutions for the global semiconductor and related industries. It provides etch and deposition processes on a range of single wafer handling platforms for wafer sizes up to 330mm, as well as 400mm taped frame assemblies. These products include etch and deposition equipment designed to address advanced IC packaging manufacturing, and also manufacturing of devices such as MEMS, LEDs, high speed RF and power semiconductors. The technology and products of SPTS are used by universities, research institutes, and full-scale production companies.
The Omega family of plasma etch solutions includes the Rapier, Synapse, and ICP process modules. The latest generation Rapier deep reactive ion etch (“DRIE”) module etches large and small structures in silicon MEMS devices such as microphones, accelerometers and gyroscopes. The Si etch modules are also used in advanced packaging to create through-silicon vias, and to rapidly etch wafers to a thickness of less than 10µm for very high density die stacking. The Synapse module etches strongly bond materials such as wide bandgap compounds for power switches, and piezoelectric resonators. The ICP module is used in the manufacture of devices such as RF power amplifiers and vertical cavity surface emitting lasers (“VCSELs”) and etches materials including dielectrics and III-V and II-VI semiconductors.
The Mosaic Plasma Dicing solution includes the Rapier-S series of process modules and uses a non-contact etch process to singulate die on full thickness and taped-framed wafers. Because plasma dicing does not cause chipping or cracking, chip designers can place die much closer together, increasing die count per wafer. Plasma dicing does not degrade silicon strength and produces fewer defects than conventional dicing techniques. These characteristics are increasingly important for zero-defect automotive applications and die-to-die bonding.
The Sigma systems deposit conducting and insulating layers by physical vapor deposition (PVD), sometimes referred to as “sputtering.” For the advanced packaging market, the Sigma system is used to create redistribution and under-bump layers in fan-in and fan-out packages. For power management devices, thick conductor layers are deposited on the front side of the wafer, and solderable stacks on the backside. In the RF/MEMS space, the Sigma system is used to deposit uniform, stress-controlled piezoelectric films for bulk acoustic wave (“BAW”) high frequency filters.
The Delta plasma enhanced chemical vapor deposition (“PECVD”) systems are used for a wide range of dielectric applications within MEMS, compound semiconductor, photonics and advanced packaging industries. SPTS specializes in depositing silicon oxide and nitride layers at temperatures below 200°C, with tightly controlled stress and optical properties.
The Primaxx HF Release Etch products are used to remove sacrificial silicon oxide layers, primarily to release silicon microstructures in MEMS devices. SPTS’s proprietary dry process avoids stiction of released moving parts and subsequent damage to delicate structures, common issues with conventional wet processing technology.
The Xactix XeF2 Release Etch products are used for isotropic etching of silicon to release MEMS devices. As a vapor phase etchant, XeF2 avoids many of the problems typically associated with wet or plasma etch processes.
Single wafer platforms: SPTS offers a range of single wafer handling platforms for Omega, Sigma, Mosaic, Delta, Primaxx, and Xactix systems for volume production, R&D and pilot production environments.
The MVD system replaces traditional liquid coating processes with a highly reproducible molecular vapor deposition (“MVD”) alternative that is valuable for MEMS/BioMEMS manufacturing applications. The MVD system is also used for commercial applications requiring moisture barriers, anti-corrosion coatings, or release layers for imprinting.
The Magna system uses inkjet technology for three-dimensional printing of underfill dam structures and thick isolating layers in defined areas of a chip, for volume production applications.
JEText is the latest generation inkjet system for semiconductor package marking.
8
PCB, Display and Component Inspection:
Printed Circuit Board (“PCB”) Manufacturing
PCBs are the basic interconnect platforms for the electronic components that comprise all electronic equipment. An assembly of one or more PCBs on which desired components have been mounted forms an essential part of most electronic products. PCBs are manufactured in a series of complex steps, generally starting with a sheet of epoxy-fiberglass (or other material with electric insulating qualities), laminated with a conducting material such as copper. The conductor pattern is subsequently transferred to the substrate either through a direct imaging (“DI”) or photolithographic process and a chemical etching process, followed by removal of excess conducting material, leaving the desired conducting metal pattern printed on the layer.
Because PCBs are susceptible to various defects (electrical shorts, open circuits and insufficient or off-measure conductor widths), inspection is required throughout PCB production to identify such defects, which are then repaired, if possible. Early detection of these defects increases the possibility of successful repair and reduces the number of unusable boards, thereby reducing the overall cost to the manufacturer. Early detection and repair are particularly valuable in cases of multilayered and ‘build-up’ boards, wherein PCB layers are embedded inside the finished board.
KLA’s Orbotech subsidiary manufactures several solutions intended for use by manufacturers of PCBs to streamline and increase the efficiency and yield of PCB production.
Direct Imaging (“DI”)
Direct imaging technology enables the manufacture of higher density, more complex PCBs, with significantly higher yields and reduced manufacturing costs, through the elimination of artwork costs and the scrap created by contact printing. The DI involves the transfer of digital image data directly from the electronic media onto the photoresist or solder resist, thereby eliminating the need for exposing photoresist through a production photolithography tool. This process translates into fewer manufacturing steps, lower material costs and greater accuracy of layer-to-layer registration.
Orbotech’s direct imaging (DI) solutions include the Nuvogo series, the Paragon-Ultra series, and the Orbotech Diamond series. Nuvogo is an advanced DI series for substrate-like PCB (“SLP”), modified semi-additive process (“mSAP”), advanced high density interconnect (“HDI”), and flex and advanced multi-layer PCB (“MLB”) mass production. The Paragon-Ultra series serves complex applications including flip chip ball grid array (“FC-BGA”), flip chip-chip scale package (“FC-CSP”) and BGA/CSP. Orbotech Diamond is a high capacity, high throughput DI series to address challenging surface topographies.
Automated Optical Inspection (“AOI”)
PCB-AOI solutions are computerized, electro-optical systems for inspection and identification of defects in PCBs and photolithography tools at various stages of production. Orbotech’s AOI solutions include the Ultra Dimension series, the Ultra Fusion/Fusion series and the Discovery II series. The Ultra Dimension series incorporates pattern inspection, laser via inspection, remote multi-image verification and two-dimensional metrology, to offer advanced electronics manufacturers a way to significantly improve their quality and yield. The Ultra Dimension solutions are suitable for advanced IC substrates, substrate-like PCB (“SLP”), modified semi-additive process (“mSAP”), advanced HDI, flexible printed circuits and more. The Fusion/Ultra Fusion series inspection solutions include offerings for advanced IC substrates, SLP, mSAP, advanced HDI, flexible printed circuits and more. The Discovery II AOI series AOI handles inspection challenges for MLB, quick turnaround (“QTA”), flex and HDI mass production.
Automated Optical Shaping (“AOS”)
AOS solutions are designed to address certain limitations inherent in the manual repair of PCBs by enabling the automatic shaping of defects in PCB production. Such defects include excess copper (causing electrical shorts) and missing copper (causing electrical opens). Efficient shaping can reduce the scrapping of unusable panels during the manufacturing process, enabling a significant reduction in manufacturers’ overall manufacturing costs. Orbotech AOS solutions ablate the excess conductor material or add copper where missing, and are commonly used for advanced PCBs, where manual repair is not practical.
Orbotech’s Precise series is an automated solution for shaping both open and shorts defects for increasingly fine line/space circuitry. The PerFix series addresses excess copper defects for advanced IC substrates, fine line applications, SLP/mSAP, advanced flex applications, and complex HDI and MLB manufacturing.
9
Inkjet/Additive Printing
Additive printing refers to the stage in the PCB manufacturing process during which characters and other non-functional patterns (“legends”) are printed on the PCB. Using a digital, non-contact, additive-based printing technology, digital print heads release droplets of ink from small apertures directly onto a given medium to create the required image. The Sprint series is our flagship solution for additive printing.
Laser Drilling
Ultraviolet (“UV”) laser drilling is used to generate the interconnection (vias) between different layers in IC substrates for advanced packaging applications, where traditional mechanical drills or CO2 laser techniques cannot achieve the accuracy required. The Emerald 160 UV laser drilling solutions address challenging IC substrate, IC packaging and flex applications, including skiving and routing.
Laser Plotting
Laser plotters provide PCB manufacturers with the capability to quickly transform circuit designs on electronic media or design data retrieved from computer aided manufacturing (“CAM”) databases into accurate, reliable artwork for production photolithography tools. Orbotech’s LP-9 high speed laser plotters are designed for printing high density jobs on film that is subsequently used in the traditional PCB photolithography process.
Smart Factory/Industry 4.0
Orbotech Smart Factory is an Industry 4.0 compliant solution that delivers manufacturing intelligence to help manufacturers increase yield, improve production floor management and better track production trends.
Pre-Production
CAM and engineering solutions from Frontline P.C.B. Solutions Limited Partnership (“Frontline”), an Orbotech subsidiary, are designed for use in the PCB pre-production phase to facilitate automation and integration of the sales, tooling, production data and inspection needs associated with PCB production.
Display Manufacturing
Flat Panel Display (“FPDs”), which include liquid-crystal displays (“LCDs”), organic light-emitting diode (“OLED”) displays and other types of displays, are currently used for laptop and desktop computers, tablets, televisions, smartphones, public electronic signs, automotive displays, digital and video cameras, augmented reality/virtual reality (“AR/VR”), wearable devices and a variety of other devices for technical, medical, military, aerospace and consumer electronics applications. LCDs and OLEDs are susceptible to various defects, many of which result from the deposition, photolithography and etching processes used in their production. Detection and repair of these defects during the production process allows manufacturers to improve monitoring of their production processes, avoid the expense of further costly material and improve their yields.
Orbotech’s FPD AOI and test systems identify and classify defects that may impact the performance of the display panel, while our repair systems are designed to enable customers to repair defects, thereby further improving the manufacturer’s yield and grade (quality) of displays.
Automated Optical Inspection (
“
AOI
”
)
Orbotech’s automated optical inspection solutions accommodate all types of display panels up to and including Gen 10.5. The Quantum and FPI-6000 product lines inspect and classify defects to boost yield of high-volume LCD and flex OLED display production.
Electrical Testing
Orbotech’s electrical test systems detect, locate, quantify and characterize electrical, contamination and other defects in active matrix LCD and OLED displays after array fabrication. These systems determine whether individual pixels or lines of pixels are functional and also identify subtle defects such as variations in individual pixel voltage. These defect data files are then used for repair and statistical process control. The Array Checker and Accelon systems comprise Orbotech’s electrical testing portfolio.
10
Repair
Orbotech’s Prism and Array Saver systems repair defects of any shape and any pattern for high-end TVs and flex OLED displays.
Component Inspection
For packaged IC component inspection, the ICOS F160 system performs inspection and die sorting after wafer-level packages are tested and diced. Our packaged IC component inspector products, including the ICOS T890, inspect various semiconductor components that are handled in a tray, such as microprocessors or memory chips. Component inspection capability includes 3D coplanarity inspection, measurement of the evenness of the contacts, component height and two-dimensional (“2D”) surface inspection. The ICOS T3 and T7 Series tools provide high performance, fully automated optical inspection of packaged IC components, with either tray (T3) or tape (T7) output capability. Both incorporate the SPECTRUM and SIGMA modules, which produce increased 2D and 3D measurement sensitivity for improved detection of issues that affect final package quality. The MV Series provides several configurations to support fully automated or portable optical inspection of packaged integrated circuit components with tape or tray output.
Other:
KLA engages in the research, development and marketing of products for the deposition of thin film coating of various materials on crystalline silicon photovoltaic wafers for solar energy panels.
KLA Services:
Our services programs enable our customers in all business sectors to maintain the high performance and productivity of our products through a flexible portfolio of services. Whether a manufacturing site is producing integrated circuits, wafers, reticles, ICs, display or PCB products, our service teams collaborate with customers to determine the best products and services to meet technology and business requirements.
11
Product Table
|
SEGMENT
|
MARKETS
|
APPLICATIONS
|
PRODUCTS
|
|
Semiconductor Process Control
|
|||
|
Chip and Wafer Manufacturing
|
|||
|
Defect Inspection | Review
|
|||
|
Patterned Wafer
|
39xx, 29xx Series
Puma™ Series
Voyager™ 1015
|
||
|
High Productivity and All Surface
|
CIRCL™ with 8 Series, CV350i, BDR300™
and Micro300 modules
8 Series
|
||
|
Unpatterned Wafer/Surface
|
Surfscan
®
SPx Series
|
||
|
Electron-beam Review
|
eDR72xx
™
Series
|
||
|
Data Analytics
|
Klarity
®
product family
5D Analyzer
®
RDC
FabVision
®
ProDATA™
|
||
|
Metrology
|
|||
|
Overlay
|
Archer™
Series
ATL™
Series
|
||
|
Optical CD and Shape
|
SpectraShape™ product family
|
||
|
Film Thickness/Index
|
SpectraFilm™ product family
Aleris
®
product family
Filmetrics F Series products
|
||
|
Wafer Geometry and Topography
|
WaferSight™ Series
PWG™ Series
Microsense UltraMap
®
Series
|
||
|
Edge Bead Removal
|
CIRCL™
|
||
|
Ion Implant and Anneal
|
Therma-Probe
®
680xp
|
||
|
Resistivity
|
OmniMap
®
RS product family
CIPTech
®
microHall
®
Series
|
||
|
Magnetic Metrology
|
MicroSense PKMRAM, KerrMapper
|
||
|
Surface Metrology
|
HRP
®
Series
P Series
Zeta™ Series
|
||
|
Data Analytics
|
5D Analyzer
®
|
||
|
In Situ Process Management
|
|||
|
Lithography, Plasma Etch, Deposition, CMP, Ion Implant, Wet Processing
|
SensArray
®
product family
AMW
|
||
|
In Situ Data Analytics
|
|||
|
Lithography, Plasma Etch, Deposition, CMP, Ion Implant, Wet Processing
|
SensArray
®
PlasmaSuite, LithoSuite, ThermalSuite
|
||
|
Patterning Simulation
|
|||
|
Lithography Simulation
|
PROLITH™
|
||
12
|
SEGMENT
|
MARKETS
|
APPLICATIONS
|
PRODUCTS
|
|
Reticle Manufacturing and Quality Control
|
|||
|
Defect Inspection (mask shop)
|
Teron™
600
Series, TeraScan™
500XR
|
||
|
Defect Inspection (wafer fab)
|
Teron™ SL6xx Series, X5.3™
|
||
|
Defect Inspection (mask blanks)
|
FlashScan
®
|
||
|
Pattern Placement Metrology
|
LMS IPRO Series
|
||
|
Data Analytics
|
RDC, Klarity
®
product family
|
||
|
Packaging Manufacturing
|
|||
|
Wafer-Level Packaging Inspection | Metrology
|
CIRCL™-AP, Kronos 1080, WI-2280, Zeta-5xx/6xx
|
||
|
Automated Optical Inspection
|
Ultra Fusion™
VeriFine™
Ultra Dimension™
|
||
|
Data Analytics
|
Klarity
®
product family
|
||
|
Compound Semiconductor | HDD Manufacturing
|
|||
|
LED, Photonics, RF Communications
|
8 Series, WI-2280, Candela
®
8720, Zeta-388, MicroXAM Series, P Series, HRP
®
Series, MicroSense UltraMap
®
Series
|
||
|
Power Devices
|
8 Series, WI-2280, Candela
®
8520, MicroXAM Series, P Series, HRP
®
Series
|
||
|
MEMS
|
8 Series, P Series, HRP
®
Series, MicroXAM Series, Zeta-20, Zeta-300, Zeta-388, Nano Indenter
®
G200X
|
||
|
CPV Solar
|
ZetaScan Series, Zeta-20, Zeta-300
MicroSense PV-6060, UltraMap Series
|
||
|
Display
|
ZetaScan Series, SensArray
®
Process Probe 2070, Zeta-300, P-17 OF, Nano Indenter
®
G200X
|
||
|
Data Storage Media | Head Manufacturing
|
8 Series, Candela
®
71xx, Candela
®
63xx, HRP
®
Series, P Series, Zeta-20, MicroXAM Series
MicroSense Polar Kerr, DiskMapper
|
||
|
Data Analytics
|
Klarity
®
product family
|
||
|
General Purpose/Lab Applications
|
|||
|
Surface Metrology: Stylus Profiling
|
P Series, Alpha-Step
®
product family, HRP
®
Series
|
||
|
Surface Metrology: Optical Profiling
|
MicroXAM Series, Zeta™ Series, Filmetrics Profilm3D
|
||
|
Nanomechanical Testers
|
Nano Indenter
®
G200X, T150 UTM
iMicro, iNano
®
|
||
|
Specialty Semiconductor Process
|
|||
|
Semiconductor Manufacturing
|
|||
|
Etch
|
Omega™ Series
|
||
|
Plasma Dicing
|
Mosaic™ Series
|
||
|
Deposition
|
Sigma™ Series
Delta™ Series
Primaxx™ Series
Xactix™ Series
MVD Series
|
||
|
Additive Printing
|
Magna™
JEText™
|
||
13
|
SEGMENT
|
MARKETS
|
APPLICATIONS
|
PRODUCTS
|
|
PCB, Display and Component Inspection
|
|||
|
Printed Circuit Boards
|
|||
|
Direct Imaging
|
Nuvogo™ Series
Paragon™ Series
Orbotech Diamond™ Series
|
||
|
Automated Optical Inspection
|
Ultra Dimension™ Series
Ultra Fusion™/ Fusion™ Series
Discovery™ II Series
|
||
|
Automated Optical Shaping
|
Precise™ Series
Ultra PerFix™/ PerFix™ Series
|
||
|
Inkjet / Additive Printing
|
Sprint™ Series
|
||
|
UV Laser Drilling
|
Emerald™ 160 Series
|
||
|
Laser Plotters
|
LP™-9 Family
|
||
|
Computer Aided Engineering / Manufacturing
|
Frontline InCAM Series, InQuery, InPlan, InPlan Flex
|
||
|
Display
|
|||
|
Inspection
|
Orbotech Quantum™ Series
FPI-6000
|
||
|
Electrical Testing
|
Array Checker™
Accelon
|
||
|
Repair
|
Orbotech Prism™
Array Saver™
|
||
|
Components
|
|||
|
Component Inspection
|
ICOS
®
F160, ICOS
®
T890, ICOS
®
T3 and T7 Series
MV Series
|
||
|
Other
|
|||
|
Photovoltaic Manufacturing
|
|||
|
Deposition
|
Aurora PECVD
®
|
||
Customers
To support our growing global customer base, we maintain a significant presence throughout Asia, the United States and Europe, staffed with local sales and applications engineers, customer and field service engineers and yield management consultants. We count among our largest customers the leading semiconductor, semiconductor-related and electronic device manufacturers in each of these regions.
For the fiscal years ended
June 30, 2019
,
2018
, and
2017
, the following customers each accounted for more than 10% of total revenues primarily in Semiconductor Process Control segment:
|
Year ended June 30,
|
||||
|
2019
|
2018
|
2017
|
||
|
Taiwan Semiconductor Manufacturing Company Limited
|
Samsung Electronics Co., Ltd.
|
Samsung Electronics Co., Ltd.
|
||
|
|
|
Taiwan Semiconductor Manufacturing Company Limited
|
||
Our business depends upon the capital expenditures of semiconductor, semiconductor-related and electronic device manufacturers, which in turn is driven by the current and anticipated market demand for ICs, products utilizing ICs and other electronic components. We do not consider our business to be seasonal in nature, but it has historically been cyclical with respect to the capital equipment procurement practices of semiconductor manufacturers, and it is impacted by the investment patterns of such manufacturers in different global markets. Downturns in the semiconductor industry or other industries in which we operate, or slowdowns in the worldwide economy as well as customer consolidation could have a material adverse effect on our future business and financial results.
14
Sales, Service and Marketing
Our sales, service and marketing efforts are aimed at building long-term relationships with our customers. We focus on providing a single and comprehensive resource for the full breadth of process control, process-enabling and yield management solutions for manufacturing and testing wafers and reticles, integrated circuits (“IC” or “chip”), packaging, light emitting diodes, power devices, compound semiconductor devices, microelectromechanical systems, data storage, printed circuit boards and flat and flexible panel displays, as well as general materials research. Our customers benefit from the simplified planning and coordination, as well as the increased equipment compatibility, which are realized as a result of dealing with a single supplier for multiple products and services. Our revenues are derived primarily from product sales and related service contracts, mostly through our direct sales force.
We believe that the size and location of our field sales, service and applications engineering, and marketing organizations represent a competitive advantage in our served markets. We have direct sales forces in Asia, the United States and Europe. We maintain an export compliance program that is designed to meet the requirements of the United States Departments of Commerce and State.
As of
June 30, 2019
, we employed approximately 4,280 full-time sales and related personnel, service engineers and applications engineers. In addition to sales and service offices in the United States, we conduct sales, marketing and services out of subsidiaries or branches in other countries, including China, Germany, Israel, United Kingdom, Japan, Singapore, Korea and Taiwan. International revenues accounted for approximately
87%
,
88%
and
86%
of our total revenues in the fiscal years ended
June 30, 2019
,
2018
and
2017
, respectively. Additional information regarding our revenues from foreign operations for our last three fiscal years can be found in Note 17, “Segment Reporting and Geographic Information” to the Consolidated Financial Statements.
We believe that sales outside the United States will continue to be a significant percentage of our total revenues. Our future performance will depend, in part, on our ability to continue to compete successfully in Asia, one of the largest markets for our equipment. Our ability to compete in this area is dependent upon the continuation of favorable trading relationships between countries in the region and the United States, and our continuing ability to maintain satisfactory relationships with leading semiconductor companies in the region.
International sales and operations may be adversely affected by the imposition of governmental controls, restrictions on export technology, political instability, trade restrictions, changes in tariffs and the difficulties associated with staffing and managing international operations. In addition, international sales may be adversely affected by the economic conditions in each country and by fluctuations in currency exchange rates, and such fluctuations may negatively impact our ability to compete on price with local providers or the value of revenues we generate from our international business. Although we attempt to manage some of the currency risk inherent in non-U.S. dollar product sales through hedging activities, there can be no assurance that such efforts will be adequate. These factors, as well as any of the other risk factors related to our international business and operations that are described in Item 1A, “Risk Factors,” could have a material adverse effect on our future business and financial results.
Backlog
Our backlog which represents our performance obligation to deliver products and services, totaled $1.84 billion and
$1.62 billion
as of
June 30, 2019
and
2018
, respectively, and primarily consists of sales orders where written customer requests have been received and a majority of the delivery is anticipated within the next 12 months. Orders for service contracts and unreleased products are included in the backlog. All orders are subject to risk of delays, pushouts, and cancellation by the customer, usually with limited or no penalties.
Because customers can potentially change delivery schedules or delay or cancel orders, and because some orders are received and shipped within the same quarter, our shipment backlog at any particular date is not necessarily indicative of business volumes or actual sales for any succeeding periods. The historical cyclicality of the semiconductor industry combined with the lead times from our suppliers sometimes result in timing disparities between, on the one hand, our ability to manufacture, deliver and install products and, on the other, the requirements of our customers. In our efforts to balance the requirements of our customers with the availability of resources, management of our operating model and other factors, we often must exercise discretion and judgment as to the timing and prioritization of manufacturing, deliveries and installations of products, which may impact the timing of revenue recognition with respect to such products.
15
Research and Development
The market for semiconductor and electronics industries is characterized by rapid technological development and product innovation. These technical innovations are inherently complex and require long development cycles and appropriate professional staffing. We believe that continued and timely development of new products and enhancements to existing products are necessary to maintain our competitive position. Accordingly, we devote a significant portion of our human and financial resources to research and development programs and seek to maintain close relationships with customers to remain responsive to their needs. In addition, we may enter into certain strategic development and engineering programs whereby certain government agencies or other third parties fund a portion of our research and development costs. As of
June 30, 2019
, we employed approximately 2,710 full-time research and development personnel.
Our key research and development activities during the fiscal year ended
June 30, 2019
involved the development of process control and yield management equipment aimed at addressing the challenges posed by shrinking device sizes, the transition to new production materials, new device and circuit architecture, more demanding lithography processes and new packaging techniques. For information regarding our research and development expenses during the last three fiscal years, see Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in this Annual Report on Form 10-K.
The strength of our competitive positions in many of our existing markets is largely due to our leading technology, which is the result of our continuing significant investments in product research and development. Even during down cycles in the semiconductor industry, we have remained committed to significant engineering efforts toward both product improvement and new product development in order to enhance our competitive position. New product introductions, however, may contribute to fluctuations in operating results, since customers may defer ordering existing products, and, if new products have reliability or quality problems, those problems may result in reduced orders, higher manufacturing costs, delays in acceptance of and payment for new products, and additional service and warranty expenses. There can be no assurance that we will successfully develop and manufacture new products, or that new products introduced by us will be accepted in the marketplace. If we do not successfully introduce new products, our results of operations will be adversely affected.
Manufacturing, Raw Materials and Supplies
We perform system design, assembly and testing in-house and utilize an outsourcing strategy for the manufacture of components and major subassemblies. Our in-house manufacturing activities consist primarily of assembling and testing components and subassemblies that are acquired through third-party vendors and integrating those subassemblies into our finished products. Our principal manufacturing activities take place in the United States, Singapore, Israel, Germany, United Kingdom, Italy, and China. As of
June 30, 2019
, we employed approximately 1,690 full-time manufacturing personnel.
Some critical parts, components and subassemblies (collectively, “parts”) that we use are designed by us and manufactured by suppliers in accordance with our specifications, while other parts are standard commercial products. We use numerous vendors to supply parts and raw materials for the manufacture and support of our products. Although we make reasonable efforts to ensure that these parts and raw materials are available from multiple suppliers, this is not always possible, and certain parts and raw materials included in our systems may be obtained only from a single supplier or a limited group of suppliers. Through our business interruption planning, we endeavor to minimize the risk of production interruption by, among other things, monitoring the financial condition of suppliers of key parts and raw materials, identifying (but not necessarily qualifying) possible alternative suppliers of such parts and materials, and ensuring adequate inventories of key parts and raw materials are available to maintain manufacturing schedules.
Although we seek to reduce our dependence on sole and limited source suppliers, in some cases the partial or complete loss of certain of these sources, or disruptions within our suppliers’ often-complex supply chains, could disrupt scheduled deliveries to customers, damage customer relationships and have a material adverse effect on our results of operations.
Competition
The worldwide market for technologically advanced, process control, process-enabling and yield management solutions used by semiconductor and electronics manufactures is highly competitive. In each of our product markets, we face competition from established and potential competitors, such as Applied Materials, Inc., ASML Holding N.V., Hitachi High-Technologies Corporation, Nanometrics, Inc. and Rudolph Technologies, Inc., some of which may have greater financial, research, engineering, manufacturing and marketing resources than we have. We may also face future competition from new market entrants from other overseas and domestic sources. We expect our competitors to continue to improve the design and performance of their current products and processes and to introduce new products and processes with improved price and performance characteristics. We believe that, to remain competitive, we will require significant financial resources to offer a
16
broad range of products, to maintain customer service and support centers worldwide, and to invest in product and process research and development.
We believe that, while price and delivery are important competitive factors, the customers’ overriding requirement is for systems that easily and effectively incorporate automated and highly accurate inspection and metrology capabilities into their existing manufacturing processes to enhance productivity. Significant competitive factors in the market for process control and yield management systems include system performance, ease of use, reliability, interoperability with the existing installed base and technical service and support, as well as overall cost of ownership.
Management believes that we are well positioned in the market with respect to both our products and services. However, any loss of competitive position could negatively impact our prices, customer orders, revenues, gross margins and market share, any of which would negatively impact our operating results and financial condition.
Acquisitions and Alliances
We continuously evaluate strategic acquisitions and alliances to expand our technologies, product offerings and distribution capabilities. Acquisitions involve numerous risks, including management issues and costs in connection with integration of the operations, technologies and products of the acquired companies, and the potential loss of key employees of the acquired companies. The inability to manage these risks effectively could negatively impact our operating results and financial condition.
Patents and Other Proprietary Rights
We protect our proprietary technology through reliance on a variety of intellectual property laws, including patent, copyright and trade secret. We have filed and obtained a number of patents in the United States and abroad and intend to continue pursuing the legal protection of our technology through intellectual property laws. In addition, from time to time we acquire license rights under United States and foreign patents and other proprietary rights of third parties, and we attempt to protect our trade secrets and other proprietary information through confidentiality and other agreements with our customers, suppliers, employees and consultants and through other security measures.
Although we consider patents and other intellectual property significant to our business, no single patent, copyright or trade secret is in itself essential to us as a whole or to any of our business segments.
No assurance can be given that patents will be issued on any of our applications, that license assignments will be made as anticipated, or that our patents, licenses or other proprietary rights will be sufficiently broad to protect our technology. No assurance can be given that any patents issued to or licensed by us will not be challenged, invalidated or circumvented or that the rights granted thereunder will provide us with a competitive advantage. In addition, there can be no assurance that we will be able to protect our technology or that competitors will not be able to independently develop similar or functionally competitive technology.
Environmental Matters
We are subject to a variety of federal, state and local governmental laws and regulations related to the protection of the environment, including without limitation the management of hazardous materials that we use in our business operations. Compliance with these environmental laws and regulations has not had, and is not expected to have, a material effect on our capital expenditures, financial condition, results of operations or competitive position.
However, any failure to comply with environmental laws and regulations may subject us to a range of consequences, including fines, suspension of certain of our business activities, limitations on our ability to sell our products, obligations to remediate environmental contamination, and criminal and civil liabilities or other sanctions. In addition, changes in environmental laws and regulations could require us to invest in potentially costly pollution control equipment, alter our manufacturing processes or use substitute materials. Our failure to comply with these laws and regulations could subject us to future liabilities.
Employees
As of
June 30, 2019
, we employed approximately 10,020 full-time employees. Except for our employees in Belgium (where a trade union delegation has been recognized) and our employees in the German operations of our MIE business unit (who are represented by employee works council), none of our employees are represented by a labor union. We have not experienced work stoppages and believe that our employee relations are good.
17
Competition is intense in the recruiting of personnel in the semiconductor and semiconductor equipment industry. We believe that our future success will depend, in part, on our continued ability to hire and retain qualified management, marketing and technical employees.
Glossary
This section provides definitions for certain industry and technical terms commonly used in our business, which are used elsewhere in this Item 1:
|
active matrix
|
A technology used in flat panel displays to control the imaging-produced active areas where the display pixels are located.
|
|
|
broadband
|
|
An illumination source with a wide spectral bandwidth.
|
|
computer-aided manufacturing (CAM)
|
An application technology that uses computer software and machinery to facilitate and automate manufacturing processes.
|
|
|
critical dimension (CD)
|
|
The dimension of a specified geometry (such as the width of a patterned line or the distance between two lines) that must be within design tolerances in order to maintain semiconductor device performance consistency.
|
|
design rules
|
|
Rules that set forth the allowable dimensions of particular features used in the design and layout of integrated circuits.
|
|
design technology co-optimization (DTCO)
|
The methodology of optimizing semiconductor design and process simultaneously during the technology definition phase.
|
|
|
die
|
|
The term for a single semiconductor chip on a wafer.
|
|
electron-beam
|
|
An illumination source comprised of a stream of electrons emitted by a single source.
|
|
epitaxial silicon (epi)
|
A substrate technology based on growing a crystalline silicon layer on top of a silicon wafer. The added layer, where the structure and orientation are matched to those of the silicon wafer, includes dopants (impurities) to imbue the substrate with special electronic properties.
|
|
|
excursion
|
|
For a manufacturing step or process, a deviation from normal operating conditions that can lead to decreased performance or yield of the final product.
|
|
fab
|
The main manufacturing facility for processing semiconductor wafers.
|
|
|
flat panel display (FPD)
|
A display appliance that uses a thin panel design. Also includes flexible displays.
|
|
|
flexible printed circuit (FPC)
|
Flexible circuits in a device provide mechanical support and connect various electrical and mechanical components together using material that can be shaped, bent, twisted or folded.
|
|
|
front end
|
|
The processes that make up the first half of the semiconductor manufacturing process, from wafer start through final contact window processing.
|
|
high-density interconnect (HDI)
|
HDI PCBs have a higher wiring density per unit area, finer lines and spaces, smaller vias, smaller capture pads and higher connection pad density than conventional PCBs.
|
|
|
in situ
|
|
Refers to processing steps or tests that are done without moving the wafer. Latin for “in original position.”
|
|
interconnect
|
|
A highly conductive material, usually copper or aluminum, which carries electrical signals to different parts of a die.
|
|
liquid crystal display (LCD)
|
A flat panel display technology that uses a backlight to provide light to individual pixels arranged in a grid.
|
|
18
|
lithography
|
|
A process in which a masked pattern is projected onto a photosensitive coating that covers a substrate.
|
|
mask shop
|
|
A manufacturer that produces the reticles used by semiconductor manufacturers.
|
|
metrology
|
|
The science of measurement to determine dimensions, quantity or capacity. In the semiconductor industry, typical measurements include critical dimension, overlay and film thickness.
|
|
microelectromechanical systems (MEMS)
|
Micron-sized mechanical devices powered by electricity, created using processes similar to those used to manufacture IC devices.
|
|
|
micron
|
|
A metric unit of linear measure that equals 1/1,000,000 meter (10
-6
m), or 10,000 angstroms (the diameter of a human hair is approximately 75 microns).
|
|
Moore
’
s Law
|
An observation made by Gordon Moore in 1965 and revised in 1975 that the number of transistors on a typical integrated circuit doubles approximately every two years.
|
|
|
multi-layer boards (MLB)
|
A printed circuit board (PCB) made up of three or more conductive layers that are pressed together.
|
|
|
nanometer (nm)
|
|
One billionth (10
-9
) of a meter.
|
|
organic light emitting diode (OLED)
|
A flat panel display technology containing thin flexible sheets of an organic electroluminescent material, used for visual displays.
|
|
|
patterned
|
|
For semiconductor manufacturing and industries using similar processing technologies, refers to substrates that have electronic circuits (transistors, interconnects, etc.) fabricated on the surface.
|
|
photoresist
|
|
A radiation-sensitive material that, when properly applied to a variety of substrates and then properly exposed and developed, masks portions of the substrate with a high degree of integrity.
|
|
printed circuit board (PCB)
|
A board used to mechanically support and electrically connect various electrical and mechanical components.
|
|
|
process control
|
|
The ability to maintain specifications of products and equipment during manufacturing operations.
|
|
reticle
|
|
A very flat glass plate that contains the patterns to be reproduced on a wafer.
|
|
silicon on insulator (SOI)
|
A substrate technology comprised of a thin top silicon layer separated from the silicon substrate by a thin insulating layer of glass or silicon dioxide, used to improve performance and reduce the power consumption of IC circuits.
|
|
|
SLP/mSAP
|
Substrate-like PCB/modified semi-additive process is an advanced manufacturing process or technique that enables fine line and space patterns with higher manufacturing precision that maximizes circuit density.
|
|
|
substrate
|
|
A wafer or other material on which layers of various materials are added during the process of manufacturing semiconductor devices (circuits), flat panel displays or printed circuit boards.
|
|
unpatterned
|
|
For semiconductor manufacturing and industries using similar processing technologies, refers to substrates that do not have electronic circuits (transistors, interconnects, etc.) fabricated on the surface. These can include bare silicon wafers, other bare substrates or substrates on which blanket films have been deposited.
|
|
yield management
|
|
The ability of a semiconductor manufacturer to oversee, manage and control its manufacturing processes so as to maximize the percentage of manufactured wafers or die that conform to pre-determined specifications.
|
__________________
19
The definitions above are from internal sources, as well as online semiconductor dictionaries such as
https://www.semiconductors.org/faq/glossary/
.
|
ITEM 1A.
|
RISK FACTORS
|
A description of factors that could materially affect our business, financial condition or operating results is provided below.
Risks Associated with Our Industry
Ongoing changes in the technology industry, as well as the semiconductor industry in particular, could expose our business to significant risks.
The industries that we serve, including the semiconductor, flat panel display and printed circuit board industries, are constantly developing and changing over time. Many of the risks associated with operating in these industries are comparable to the risks faced by all technology companies, such as the uncertainty of future growth rates in the industries that we serve, pricing trends in the end-markets for consumer electronics and other products (which place a growing emphasis on our customers’ cost of ownership), changes in our customers’ capital spending patterns and, in general, an environment of constant change and development, including decreasing product and component dimensions; use of new materials; and increasingly complex device structures, applications and process steps. If we fail to appropriately adjust our cost structure and operations to adapt to any of these trends, or, with respect to technological advances, if we do not timely develop new technologies and products that successfully anticipate and address these changes, we could experience a material adverse effect on our business, financial condition and operating results.
In addition, we face a number of risks specific to ongoing changes in the semiconductor industry, as significant majority of our sales are our process control and yield management products sold to semiconductor manufacturers. Some of the trends that our management monitors in operating our business include the following:
|
•
|
the potential for reversal of the long-term historical trend of declining cost per transistor with each new generation of technological advancement within the semiconductor industry, and the adverse impact that such reversal may have upon our business;
|
|
•
|
the increasing cost of building and operating fabrication facilities and the impact of such increases on our customers’ capital equipment investment decisions;
|
|
•
|
differing market growth rates and capital requirements for different applications, such as memory, logic and foundry;
|
|
•
|
lower level of process control adoption by our memory customers compared to our foundry and logic customers;
|
|
•
|
our customers’ reuse of existing and installed products, which may decrease their need to purchase new products or solutions at more advanced technology nodes;
|
|
•
|
the emergence of disruptive technologies that change the prevailing semiconductor manufacturing processes (or the economics associated with semiconductor manufacturing) and, as a result, also impact the inspection and metrology requirements associated with such processes;
|
|
•
|
the higher design costs for the most advanced integrated circuits, which could economically constrain leading-edge manufacturing technology customers to focus their resources on only the large, technologically advanced products and applications;
|
|
•
|
the possible introduction of integrated products by our larger competitors that offer inspection and metrology functionality in addition to managing other semiconductor manufacturing processes;
|
|
•
|
changes in semiconductor manufacturing processes that are extremely costly for our customers to implement and, accordingly, our customers could reduce their available budgets for process control equipment by reducing inspection and metrology sampling rates for certain technologies;
|
|
•
|
the bifurcation of the semiconductor manufacturing industry into (a) leading edge manufacturers driving continued research and development into next-generation products and technologies and (b) other manufacturers that are content with existing (including previous generation) products and technologies;
|
|
•
|
the ever escalating cost of next-generation product development, which may result in joint development programs between us and our customers or government entities to help fund such programs that could restrict our control of, ownership of and profitability from the products and technologies developed through those programs; and
|
|
•
|
the entry by some semiconductor manufacturers into collaboration or sharing arrangements for capacity, cost or risk with other manufacturers, as well as increased outsourcing of their manufacturing activities, and greater focus only on specific markets or applications, whether in response to adverse market conditions or other market pressures.
|
20
Any of the changes described above may negatively affect our customers’ rate of investment in the capital equipment that we produce, which could result in downward pressure on our prices, customer orders, revenues and gross margins. If we do not successfully manage the risks resulting from any of these or other potential changes in our industries, our business, financial condition and operating results could be adversely impacted.
We are exposed to risks associated with a highly concentrated customer base.
Our customer base, particularly in the semiconductor industry, historically has been highly concentrated due to corporate consolidation, acquisitions and business closures. In this environment, orders from a relatively limited number of manufacturers have accounted for, and are expected to continue to account for, a substantial portion of our sales. This increasing concentration exposes our business, financial condition and operating results to a number of risks, including the following:
|
•
|
The mix and type of customers, and sales to any single customer, may vary significantly from quarter to quarter and from year to year, which exposes our business and operating results to increased volatility tied to individual customers.
|
|
•
|
New orders from our foundry customers in the past several years have constituted a significant portion of our total orders. This concentration increases the impact that future business or technology changes within the foundry industry may have on our business, financial condition and operating results.
|
|
•
|
In a highly concentrated business environment, if a particular customer does not place an order, or if they delay or cancel orders, we may not be able to replace the business. Furthermore, because our process control and yield management products are configured to each customer’s specifications, any changes, delays or cancellations of orders may result in significant, non-recoverable costs.
|
|
•
|
As a result of this consolidation, the customers that survive the consolidation represent a greater portion of our sales and, consequently, have greater commercial negotiating leverage. Many of our large customers have more aggressive policies regarding engaging alternative, second-source suppliers for the products we offer and, in addition, may seek and, on occasion, receive pricing, payment, intellectual property-related or other commercial terms that may have an adverse impact on our business. Any of these changes could negatively impact our prices, customer orders, revenues and gross margins.
|
|
•
|
Certain customers have undergone significant ownership changes, created alliances with other companies, experienced management changes or have outsourced manufacturing activities, any of which may result in additional complexities in managing customer relationships and transactions. Any future change in ownership or management of our existing customers may result in similar challenges, including the possibility of the successor entity or new management deciding to select a competitor’s products.
|
|
•
|
The highly concentrated business environment also increases our exposure to risks related to the financial condition of each of our customers. For example, as a result of the challenging economic environment during fiscal year 2009, we were (and in some cases continue to be) exposed to additional risks related to the continued financial viability of certain of our customers. To the extent our customers experience liquidity issues in the future, we may be required to incur additional bad debt expense with respect to receivables owed to us by those customers. In addition, customers with liquidity issues may be forced to reduce purchases of our equipment, delay deliveries of our products, discontinue operations or may be acquired by one of our customers, and in either case such event would have the effect of further consolidating our customer base.
|
|
•
|
Semiconductor manufacturers generally must commit significant resources to qualify, install and integrate process control and yield management equipment into a semiconductor production line. We believe that once a semiconductor manufacturer selects a particular supplier’s process control and yield management equipment, the manufacturer generally relies upon that equipment for that specific production line application for an extended period of time. Accordingly, we expect it to be more difficult to sell our products to a given customer for that specific production line application and other similar production line applications if that customer initially selects a competitor’s equipment. Similarly, we expect it to be challenging for a competitor to sell its products to a given customer for a specific production line application if that customer initially selects our equipment.
|
|
•
|
Prices differ among the products we offer for different applications due to differences in features offered or manufacturing costs. If there is a shift in demand by our customers from our higher-priced to lower-priced products, our gross margin and revenue would decrease. In addition, when products are initially introduced, they tend to have higher costs because of initial development costs and lower production volumes relative to the previous product generation, which can impact gross margin.
|
Any of these factors could have a material adverse effect on our business, financial condition and operating results.
21
We operate in industries that have historically been cyclical, including the semiconductor industry. The purchasing decisions of our customers are highly dependent on the economies of both the local markets in which they are located and the condition of the industry worldwide. If we fail to respond to industry cycles, our business could be seriously harmed.
The timing, length and severity of the up-and-down cycles in the industries in which we serve are difficult to predict. The historically cyclical nature of the semiconductor industry in which we primarily operate is largely a function of our customers’ capital spending patterns and need for expanded manufacturing capacity, which in turn are affected by factors such as capacity utilization, consumer demand for products, inventory levels and our customers’ access to capital. Cyclicality affects our ability to accurately predict future revenue and, in some cases, future expense levels. During down cycles in our industry, the financial results of our customers may be negatively impacted, which could result not only in a decrease in, or cancellation or delay of, orders (which are generally subject to cancellation or delay by the customer with limited or no penalty) but also a weakening of their financial condition that could impair their ability to pay for our products or our ability to recognize revenue from certain customers. Our ability to recognize revenue from a particular customer may also be negatively impacted by the customer’s funding status, which could be weakened not only by adverse business conditions or inaccessibility to capital markets for any number of macroeconomic or company-specific reasons, but also by funding limitations imposed by the customer’s unique organizational structure. Any of these factors could negatively impact our business, operating results and financial condition.
When cyclical fluctuations result in lower than expected revenue levels, operating results may be adversely affected and cost reduction measures may be necessary for us to remain competitive and financially sound. During periods of declining revenues, we must be in a position to adjust our cost and expense structure to prevailing market conditions and to continue to motivate and retain our key employees. If we fail to respond, or if our attempts to respond fail to accomplish our intended results, then our business could be seriously harmed. Furthermore, any workforce reductions and cost reduction actions that we adopt in response to down cycles may result in additional restructuring charges, disruptions in our operations and loss of key personnel. In addition, during periods of rapid growth, we must be able to increase manufacturing capacity and personnel to meet customer demand. We can provide no assurance that these objectives can be met in a timely manner in response to industry cycles. Each of these factors could adversely impact our operating results and financial condition.
In addition, our management typically provides quarterly forecasts for certain financial metrics, which, when made, are based on business and operational forecasts that are believed to be reasonable at the time. However, largely due to the historical cyclicality of our business and the industries in which we operate, and the fact that business conditions in our industries can change very rapidly as part of these cycles, our actual results may vary (and have varied in the past) from forecasted results. These variations can occur for any number of reasons, including, but not limited to, unexpected changes in the volume or timing of customer orders, product shipments or product acceptance; an inability to adjust our operations rapidly enough to adapt to changing business conditions; or a different than anticipated effective tax rate. The impact on our business of delays or cancellations of customer orders may be exacerbated by the short lead times that our customers expect between order placement and product shipment. This is because order delays and cancellations may lead not only to lower revenues, but also, due to the advance work we must do in anticipation of receiving a product order to meet the expected lead times, to significant inventory write-offs and manufacturing inefficiencies that decrease our gross margin. Any of these factors could materially and adversely affect our financial results for a particular quarter and could cause those results to differ materially from financial forecasts we have previously provided. We provide these forecasts with the intent of giving investors and analysts a better understanding of management’s expectations for the future, but those reviewing such forecasts must recognize that such forecasts are comprised of, and are themselves, forward-looking statements subject to the risks and uncertainties described in this Item 1A and elsewhere in this report and in our other public filings and public statements. If our operating or financial results for a particular period differ from our forecasts or the expectations of investment analysts, or if we revise our forecasts, the market price of our common stock could decline.
22
Risks Related to Our Business Model and Capital Structure
If we do not develop and introduce new products and technologies in a timely manner in response to changing market conditions or customer requirements, our business could be seriously harmed.
Success in the industries in which we serve, including the semiconductor, flat panel display and printed circuit board industries depends, in part, on continual improvement of existing technologies and rapid innovation of new solutions. The primary driver of technology advancement in the semiconductor industry has been to shrink the lithography that prints the circuit design on semiconductor chips. That driver appears to be slowing, which may cause semiconductor manufacturers to delay investments in equipment, investigate more complex device architectures, use new materials and develop innovative fabrication processes. These and other evolving customer plans and needs require us to respond with continued development programs and cut back or discontinue older programs, which may no longer have industry-wide support. Technical innovations are inherently complex and require long development cycles and appropriate staffing of highly qualified employees. Our competitive advantage and future business success depend on our ability to accurately predict evolving industry standards, develop and introduce new products and solutions that successfully address changing customer needs, win market acceptance of these new products and solutions, and manufacture these new products in a timely and cost-effective manner. Our failure to accurately predict evolving industry standards and develop as well as offer competitive technology solutions in a timely manner with cost-effective products could result in loss of market share, unanticipated costs, and inventory obsolescence, which would adversely impact our business, operating results and financial condition.
We must continue to make significant investments in research and development in order to enhance the performance, features and functionality of our products, to keep pace with competitive products and to satisfy customer demands. Substantial research and development costs typically are incurred before we confirm the technical feasibility and commercial viability of a new product, and not all development activities result in commercially viable products. There can be no assurance that revenues from future products or product enhancements will be sufficient to recover the development costs associated with such products or enhancements. In addition, we cannot be sure that these products or enhancements will receive market acceptance or that we will be able to sell these products at prices that are favorable to us. Our business will be seriously harmed if we are unable to sell our products at favorable prices or if the market in which we operate does not accept our products.
In addition, the complexity of our products exposes us to other risks. We regularly recognize revenue from a sale upon shipment of the applicable product to the customer (even before receiving the customer’s formal acceptance of that product) in certain situations, including sales of products for which installation is considered perfunctory, transactions in which the product is sold to an independent distributor and we have no installation obligations, and sales of products where we have previously delivered the same product to the same customer location and that prior delivery has been accepted. However, our products are very technologically complex and rely on the interconnection of numerous subcomponents (all of which must perform to their respective specifications), so it is conceivable that a product for which we recognize revenue upon shipment may ultimately fail to meet the overall product’s required specifications. In such a situation, the customer may be entitled to certain remedies, which could materially and adversely affect our operating results for various periods and, as a result, our stock price.
We derive a substantial percentage of our revenues from sales of inspection products. As a result, any delay or reduction of sales of these products could have a material adverse effect on our business, financial condition and operating results. The continued customer demand for these products and the development, introduction and market acceptance of new products and technologies are critical to our future success.
Our success is dependent in part on our technology and other proprietary rights. If we are unable to maintain our lead or protect our proprietary technology, we may lose valuable assets.
Our success is dependent in part on our technology and other proprietary rights. We own various United States and international patents and have additional pending patent applications relating to some of our products and technologies. The process of seeking patent protection is lengthy and expensive, and we cannot be certain that pending or future applications will actually result in issued patents or that issued patents will be of sufficient scope or strength to provide meaningful protection or commercial advantage to us. Other companies and individuals, including our larger competitors, may develop technologies and obtain patents relating to our business that are similar or superior to our technology or may design around the patents we own, which may adversely affect our business. In addition, we at times engage in collaborative technology development efforts with our customers and suppliers, and these collaborations may constitute a key component of certain of our ongoing technology and product research and development projects. The termination of any such collaboration, or delays caused by disputes or other unanticipated challenges that may arise in connection with any such collaboration, could significantly impair our research and development efforts, which could have a material adverse impact on our business and operations.
23
We also maintain trademarks on certain of our products and services and claim copyright protection for certain proprietary software and documentation. However, we can give no assurance that our trademarks and copyrights will be upheld or successfully deter infringement by third parties.
While patent, copyright and trademark protection for our intellectual property is important, we believe our future success in highly dynamic markets is most dependent upon the technical competence and creative skills of our personnel. We attempt to protect our trade secrets and other proprietary information through confidentiality and other agreements with our customers, suppliers, employees and consultants and through other security measures. We also maintain exclusive and non-exclusive licenses with third parties for strategic technology used in certain products. However, these employees, consultants and third parties may breach these agreements, and we may not have adequate remedies for wrongdoing. In addition, the laws of certain territories in which we develop, manufacture or sell our products may not protect our intellectual property rights to the same extent as do the laws of the United States. In any event, the extent to which we can protect our trade secrets through the use of confidentiality agreements is limited, and our success will depend to a significant extent on our ability to innovate ahead of our competitors.
Our future performance depends, in part, upon our ability to continue to compete successfully worldwide.
Our industry includes large manufacturers with substantial resources to support customers worldwide. Some of our competitors are diversified companies with greater financial resources and more extensive research, engineering, manufacturing, marketing, and customer service and support capabilities than we possess. We face competition from companies whose strategy is to provide a broad array of products and services, some of which compete with the products and services that we offer. These competitors may bundle their products in a manner that may discourage customers from purchasing our products, including pricing such competitive tools significantly below our product offerings. In addition, we face competition from smaller emerging companies whose strategy is to provide a portion of the products and services that we offer, using innovative technology to sell products into specialized markets. The strength of our competitive positions in many of our existing markets is largely due to our leading technology, which is the result of continuing significant investments in product research and development. However, we may enter new markets, whether through acquisitions or new internal product development, in which competition is based primarily on product pricing, not technological superiority. Further, some new growth markets that emerge may not require leading technologies. Loss of competitive position in any of the markets we serve, or an inability to sell our products on favorable commercial terms in new markets we may enter, could negatively affect our prices, customer orders, revenues, gross margins and market share, any of which would negatively affect our operating results and financial condition.
Our business would be harmed if we do not receive parts sufficient in number and performance to meet our production requirements and product specifications in a timely and cost-effective manner.
We use a wide range of materials in the production of our products, including custom electronic and mechanical components, and we use numerous suppliers to supply these materials. We generally do not have guaranteed supply arrangements with our suppliers. Because of the variability and uniqueness of customers’ orders, we do not maintain an extensive inventory of materials for manufacturing. Through our business interruption planning, we seek to minimize the risk of production and service interruptions and/or shortages of key parts by, among other things, monitoring the financial stability of key suppliers, identifying (but not necessarily qualifying) possible alternative suppliers and maintaining appropriate inventories of key parts. Although we make reasonable efforts to ensure that parts are available from multiple suppliers, certain key parts are available only from a single supplier or a limited group of suppliers. Also, key parts we obtain from some of our suppliers incorporate the suppliers’ proprietary intellectual property; in those cases we are increasingly reliant on third parties for high-performance, high-technology components, which reduces the amount of control we have over the availability and protection of the technology and intellectual property that is used in our products. In addition, if certain of our key suppliers experience liquidity issues and are forced to discontinue operations, which is a heightened risk especially during economic downturns, it could affect their ability to deliver parts and could result in delays for our products. Similarly, especially with respect to suppliers of high-technology components, our suppliers themselves have increasingly complex supply chains, and delays or disruptions at any stage of their supply chains may prevent us from obtaining parts in a timely manner and result in delays for our products. Our operating results and business may be adversely impacted if we are unable to obtain parts to meet our production requirements and product specifications, or if we are only able to do so on unfavorable terms. Furthermore, a supplier may discontinue production of a particular part for any number of reasons, including the supplier’s financial condition or business operational decisions, which would require us to purchase, in a single transaction, a large number of such discontinued parts in order to ensure that a continuous supply of such parts remains available to our customers. Such “end-of-life” parts purchases could result in significant expenditures by us in a particular period, and ultimately any unused parts may result in a significant inventory write-off, either of which could have an adverse impact on our financial condition and results of operations for the applicable periods.
24
If we fail to operate our business in accordance with our business plan, our operating results, business and stock price may be significantly and adversely impacted.
We attempt to operate our business in accordance with a business plan that is established annually, revised frequently (generally quarterly), and reviewed by management even more frequently (at least monthly). Our business plan is developed based on a number of factors, many of which require estimates and assumptions, such as our expectations of the economic environment, future business levels, our customers’ willingness and ability to place orders, lead-times, and future revenue and cash flow. Our budgeted operating expenses, for example, are based in part on our future revenue expectations. However, our ability to achieve our anticipated revenue levels is a function of numerous factors, including the volatile and historically cyclical nature of our primary industry, customer order cancellations, macroeconomic changes, operational matters regarding particular agreements, our ability to manage customer deliveries, the availability of resources for the installation of our products, delays or accelerations by customers in taking deliveries and the acceptance of our products (for products where customer acceptance is required before we can recognize revenue from such sales), our ability to operate our business and sales processes effectively, and a number of the other risk factors set forth in this Item 1A.
Because our expenses are in most cases relatively fixed in the short term, any revenue shortfall below expectations could have an immediate and significant adverse effect on our operating results. Similarly, if we fail to manage our expenses effectively or otherwise fail to maintain rigorous cost controls, we could experience greater than anticipated expenses during an operating period, which would also negatively affect our results of operations. If we fail to operate our business consistent with our business plan, our operating results in any period may be significantly and adversely impacted. Such an outcome could cause customers, suppliers or investors to view us as less stable, or could cause us to fail to meet financial analysts’ revenue or earnings estimates, any of which could have an adverse impact on our stock price.
In addition, our management is constantly striving to balance the requirements and demands of our customers with the availability of resources, the need to manage our operating model and other factors. In furtherance of those efforts, we often must exercise discretion and judgment as to the timing and prioritization of manufacturing, deliveries, installations and payment scheduling. Any such decisions may impact our ability to recognize revenue, including the fiscal period during which such revenue may be recognized, with respect to such products, which could have a material adverse effect on our business, results of operations or stock price.
We have a leveraged capital structure.
As of
June 30, 2019
, we had
$3.45 billion
aggregate principal amount of senior, unsecured long-term notes. Additionally, we have commitments for an unfunded Revolving Credit Facility of
$1.00 billion
under the Credit Agreement. We may incur additional indebtedness in the future by accessing the unfunded portion of our Revolving Credit Facility and/or entering into new financing arrangements. For example, at the same time we announced our intention to acquire Orbotech, we also announced a new stock repurchase program authorizing the repurchase up to $2.00 billion of our common stock, a large portion of which would be financed with new indebtedness. Our ability to pay interest and repay the principal of our current indebtedness is dependent upon our ability to manage our business operations, our credit rating, the ongoing interest rate environment and the other risk factors discussed in this section. There can be no assurance that we will be able to manage any of these risks successfully.
In addition, the interest rates of the senior, unsecured long-term notes may be subject to adjustments from time to time if Moody’s Investors Service, Inc. (“Moody’s”), Standard & Poor’s Ratings Services (“S&P”) or, under certain circumstances, a substitute rating agency selected by us as a replacement for Moody’s or S&P, as the case may be (a “Substitute Rating Agency”), downgrades (or subsequently upgrades) its rating assigned to the respective series of notes such that the adjusted rating is below investment grade. Accordingly, changes by Moody’s, S&P, or a Substitute Rating Agency to the rating of any series of notes, our outlook or credit rating could require us to pay additional interest, which may negatively affect the value and liquidity of our debt and the market price of our common stock could decline. Factors that can affect our credit rating include changes in our operating performance, the economic environment, conditions in the industries we serve, our financial position, including the incurrence of additional indebtedness, and our business strategy.
25
In certain circumstances involving a change of control followed by a downgrade of the rating of a series of notes by at least two of Moody’s, S&P and Fitch Inc., unless we have exercised our right to redeem the notes of such series, we will be required to make an offer to repurchase all or, at the holder’s option, any part, of each holder’s notes of that series pursuant to the offer described below (the “Change of Control Offer”). In the Change of Control Offer, we will be required to offer payment in cash equal to 101% of the aggregate principal amount of notes repurchased plus accrued and unpaid interest, if any, on the notes repurchased, up to, but not including, the date of repurchase. We cannot make any assurance that we will have sufficient financial resources at such time or will be able to arrange financing to pay the repurchase price of that series of notes. Our ability to repurchase that series of notes in such event may be limited by law, by the indenture associated with that series of notes, or by the terms of other agreements to which we may be party at such time. If we fail to repurchase that series of notes as required by the terms of such notes, it would constitute an event of default under the indenture governing that series of notes which, in turn, may also constitute an event of default under other of our obligations.
Borrowings under our Revolving Credit Facility bear interest at a floating rate, and an increase in interest rates would require us to pay additional interest on any borrowings, which may have an adverse effect on the value and liquidity of our debt and the market price of our common stock could decline. The interest rate under our Revolving Credit Facility is also subject to an adjustment in conjunction with our credit rating downgrades or upgrades. Additionally, under our Revolving Credit Facility, we are required to comply with affirmative and negative covenants, which include the maintenance of certain financial ratios, the details of which can be found in Note 8, “Debt,” to our Consolidated Financial Statements.
If we fail to comply with these covenants, we will be in default and our borrowings will become immediately due and payable. There can be no assurance that we will have sufficient financial resources or we will be able to arrange financing to repay our borrowings at such time. In addition, certain of our domestic subsidiaries are required to guarantee our borrowings under our Revolving Credit Facility. In the event that we default on our borrowings, these domestic subsidiaries shall be liable for our borrowings, which could disrupt our operations and result in a material adverse impact on our business, financial condition or stock price.
Our leveraged capital structure may adversely affect our financial condition, results of operations and net income per share.
Our issuance and maintenance of higher levels of indebtedness could have adverse consequences including, but not limited to:
|
•
|
a negative impact on our ability to satisfy our future obligations;
|
|
•
|
an increase in the portion of our cash flows that may have to be dedicated to increased interest and principal payments that may not be available for operations, working capital, capital expenditures, acquisitions, investments, dividends, stock repurchases, general corporate or other purposes;
|
|
•
|
an impairment of our ability to obtain additional financing in the future; and
|
|
•
|
obligations to comply with restrictive and financial covenants as noted in the above risk factor and Note 8, “Debt,” to our Consolidated Financial Statements.
|
Our ability to satisfy our future expenses as well as our new debt obligations will depend on our future performance, which will be affected by financial, business, economic, regulatory and other factors. Furthermore, our future operations may not generate sufficient cash flows to enable us to meet our future expenses and service our new debt obligations, which may impact our ability to manage our capital structure to preserve and maintain our investment grade rating. If our future operations do not generate sufficient cash flows, we may need to access money available for borrowing under our Revolving Credit Facility or enter into new financing arrangements to obtain necessary funds. If we determine it is necessary to seek additional funding for any reason, we may not be able to obtain such funding or, if funding is available, we may not be able to obtain it on acceptable terms. Any borrowings under our Revolving Credit Facility will place further pressure on us to comply with the financial covenants. If we fail to make a payment associated with our debt obligations, we could be in default on such debt, and such a default could cause us to be in default on our other obligations.
26
There can be no assurance that we will continue to declare cash dividends at all or in any particular amounts.
Our Board of Directors first instituted a quarterly dividend during the fiscal year ended June 30, 2005. Since that time, we have announced a number of increases in the amount of our quarterly dividend level as well as payment of a special cash dividend that was declared and substantially paid in the second quarter of our fiscal year ended June 30, 2015. We intend to continue to pay quarterly dividends subject to capital availability and periodic determinations by our Board of Directors that cash dividends are in the best interest of our stockholders and are in compliance with all laws and agreements applicable to the declaration and payment of cash dividends by us. Future dividends may be affected by, among other factors: our views on potential future capital requirements for investments in acquisitions and the funding of our research and development; legal risks; stock repurchase programs; changes in federal and state income tax laws or corporate laws; changes to our business model; and our increased interest and principal payments required by our outstanding indebtedness and any additional indebtedness that we may incur in the future. Our dividend payments may change from time to time, and we cannot provide assurance that we will continue to declare dividends at all or in any particular amounts. A reduction in our dividend payments could have a negative effect on our stock price.
We are exposed to risks related to our commercial terms and conditions, including our indemnification of third parties, as well as the performance of our products.
Although our standard commercial documentation sets forth the terms and conditions that we intend to apply to commercial transactions with our business partners, counterparties to such transactions may not explicitly agree to our terms and conditions. In situations where we engage in business with a third party without an explicit master agreement regarding the applicable terms and conditions, or where the commercial documentation applicable to the transaction is subject to varying interpretations, we may have disputes with those third parties regarding the applicable terms and conditions of our business relationship with them. Such disputes could lead to a deterioration of our commercial relationship with those parties, costly and time-consuming litigation, or additional concessions or obligations being offered by us to resolve such disputes, or could impact our revenue or cost recognition. Any of these outcomes could materially and adversely affect our business, financial condition and results of operations.
In addition, in our commercial agreements, from time to time in the normal course of business we indemnify third parties with whom we enter into contractual relationships, including customers, suppliers and lessors, with respect to certain matters. We have agreed, under certain conditions, to hold these third parties harmless against specified losses, such as those arising from a breach of representations or covenants, other third party claims that our products when used for their intended purposes infringe the intellectual property rights of such other third parties, or other claims made against certain parties. We may be compelled to enter into or accrue for probable settlements of alleged indemnification obligations, or we may be subject to potential liability arising from our customers’ involvements in legal disputes. In addition, notwithstanding the provisions related to limitations on our liability that we seek to include in our business agreements, the counterparties to such agreements may dispute our interpretation or application of such provisions, and a court of law may not interpret or apply such provisions in our favor, any of which could result in an obligation for us to pay material damages to third parties and engage in costly legal proceedings. It is difficult to determine the maximum potential amount of liability under any indemnification obligations, whether or not asserted, due to our limited history of prior indemnification claims and the unique facts and circumstances that are likely to be involved in any particular claim. Our business, financial condition and results of operations in a reported fiscal period could be materially and adversely affected if we expend significant amounts in defending or settling any purported claims, regardless of their merit or outcomes.
We are also exposed to potential costs associated with unexpected product performance issues. Our products and production processes are extremely complex and thus could contain unexpected product defects, especially when products are first introduced. Unexpected product performance issues could result in significant costs being incurred by us, including increased service or warranty costs, providing product replacements for (or modifications to) defective products, litigation related to defective products, reimbursement for damages caused by our products, product recalls, or product write-offs or disposal costs. These costs could be substantial and could have an adverse impact upon our business, financial condition and operating results. In addition, our reputation with our customers could be damaged as a result of such product defects, which could reduce demand for our products and negatively impact our business.
27
Furthermore, we occasionally enter into volume purchase agreements with our larger customers, and these agreements may provide for certain volume purchase incentives, such as credits toward future purchases. We believe that these arrangements are beneficial to our long-term business, as they are designed to encourage our customers to purchase higher volumes of our products. However, these arrangements could require us to recognize a reduced level of revenue for the products that are initially purchased, to account for the potential future credits or other volume purchase incentives. Our volume purchase agreements require significant estimation for the amounts to be accrued depending upon the estimate of volume of future purchases. As such, we are required to update our estimates of the accruals on a periodic basis. Until the earnings process is complete, our estimates could differ in comparison to actual results. As a result, these volume purchase arrangements, while expected to be beneficial to our business over time, could materially and adversely affect our results of operations in near-term periods, including the revenue we can recognize on product sales and therefore our gross margins.
In addition, we may, in limited circumstances, enter into agreements that contain customer-specific commitments on pricing, tool reliability, spare parts stocking levels, response time and other commitments. Furthermore, we may give these customers limited audit or inspection rights to enable them to confirm that we are complying with these commitments. If a customer elects to exercise its audit or inspection rights, we may be required to expend significant resources to support the audit or inspection, as well as to defend or settle any dispute with a customer that could potentially arise out of such audit or inspection. To date, we have made no significant accruals in our Consolidated Financial Statements for this contingency. While we have not in the past incurred significant expenses for resolving disputes regarding these types of commitments, we cannot make any assurance that we will not incur any such liabilities in the future. Our business, financial condition and results of operations in a reported fiscal period could be materially and adversely affected if we expend significant amounts in supporting an audit or inspection, or defending or settling any purported claims, regardless of their merit or outcomes.
There are risks associated with our receipt of government funding for research and development.
We are exposed to additional risks related to our receipt of external funding for certain strategic development programs from various governments and government agencies, both domestically and internationally. Governments and government agencies typically have the right to terminate funding programs at any time in their sole discretion, or a project may be terminated by mutual agreement if the parties determine that the project’s goals or milestones are not being achieved, so there is no assurance that these sources of external funding will continue to be available to us in the future. In addition, under the terms of these government grants, the applicable granting agency typically has the right to audit the costs that we incur, directly and indirectly, in connection with such programs. Any such audit could result in modifications to, or even termination of, the applicable government funding program. For example, if an audit were to identify any costs as being improperly allocated to the applicable program, those costs would not be reimbursed, and any such costs that had already been reimbursed would have to be refunded. We do not know the outcome of any future audits. Any adverse finding resulting from any such audit could lead to penalties (financial or otherwise), termination of funding programs, suspension of payments, fines and suspension or prohibition from receiving future government funding from the applicable government or government agency, any of which could adversely impact our operating results, financial condition and ability to operate our business.
We have recorded significant restructuring, inventory write-off and asset impairment charges in the past and may do so again in the future, which could have a material negative impact on our business.
Historically, we have recorded material restructuring charges related to our prior global workforce reductions, large excess inventory write-offs, and material impairment charges related to our goodwill and purchased intangible assets. Workforce changes can also temporarily reduce workforce productivity, which could be disruptive to our business and adversely affect our results of operations. In addition, we may not achieve or sustain the expected cost savings or other benefits of our restructuring plans, or do so within the expected time frame. If we again restructure our organization and business processes, implement additional cost reduction actions or discontinue certain business operations, we may take additional, potentially material, restructuring charges related to, among other things, employee terminations or exit costs. We may also be required to write-off additional inventory if our product build plans or usage of service inventory decline. Also, as our lead times from suppliers increase (due to the increasing complexity of the parts and components they provide) and the lead times demanded by our customers decrease (due to the time pressures they face when introducing new products or technology or bringing new facilities into production), we may be compelled to increase our commitments, and therefore our risk exposure, to inventory purchases to meet our customers’ demands in a timely manner, and that inventory may need to be written-off if demand for the underlying product declines for any reason. Such additional write-offs could result in material charges.
28
In the past, we have recorded material charges related to the impairment of our goodwill and purchased intangible assets. Goodwill represents the excess of costs over the net fair value of net assets acquired in a business combination. Goodwill is not amortized, but is instead tested for impairment at least annually in accordance with authoritative guidance for goodwill. Purchased intangible assets with estimable useful lives are amortized over their respective estimated useful lives based on economic benefit if known or using the straight-line method, and are reviewed for impairment in accordance with authoritative guidance for long-lived assets. The valuation of goodwill and intangible assets requires assumptions and estimates of many critical factors, including revenue and market growth, operating cash flows, market multiples, and discount rates. A substantial decline in our stock price, or any other adverse change in market conditions, particularly if such change has the effect of changing one of the critical assumptions or estimates we previously used to calculate the value of our goodwill or intangible assets (and, as applicable, the amount of any previous impairment charge), could result in a change to the estimation of fair value that could result in an additional impairment charge.
Any such additional material charges, whether related to restructuring or goodwill or purchased intangible asset impairment, may have a material negative impact on our operating results and related financial statements.
We are exposed to risks related to our financial arrangements with respect to receivables factoring and banking arrangements.
We enter into factoring arrangements with financial institutions to sell certain of our trade receivables and promissory notes from customers without recourse. In addition, we maintain bank accounts with several domestic and foreign financial institutions, any of which may prove not to be financially viable. If we were to stop entering into these factoring arrangements, our operating results, financial condition and cash flows could be adversely impacted by delays or failures in collecting trade receivables. However, by entering into these arrangements, and by engaging these financial institutions for banking services, we are exposed to additional risks. If any of these financial institutions experiences financial difficulties or is otherwise unable to honor the terms of our factoring or deposit arrangements, we may experience material financial losses due to the failure of such arrangements or a lack of access to our funds, any of which could have an adverse impact upon our operating results, financial condition and cash flows.
We are subject to the risks of additional government actions in the event we were to breach the terms of any settlement arrangement into which we have entered.
In connection with the settlement of certain government actions and other legal proceedings related to our historical stock option practices, we have explicitly agreed as a condition to such settlements that we will comply with certain laws, such as the books and records provisions of the federal securities laws. If we were to violate any such law, we might not only be subject to the significant penalties applicable to such violation, but our past settlements may also be impacted by such violation, which could give rise to additional government actions or other legal proceedings. Any such additional actions or proceedings may require us to expend significant management time and incur significant accounting, legal and other expenses, and may divert attention and resources from the operation of our business. These expenditures and diversions, as well as an adverse resolution of any such action or proceeding, could have a material adverse effect on our business, financial condition and results of operations.
General Commercial, Operational, Financial and Regulatory Risks
A majority of our annual revenues are derived from outside the United States, and we maintain significant operations outside the United States. We are exposed to numerous risks as a result of the international nature of our business and operations.
A majority of our annual revenues are derived from outside the United States, and we maintain significant operations outside the United States. We expect that these conditions will continue in the foreseeable future. Managing global operations and sites located throughout the world presents a number of challenges, including but not limited to:
|
•
|
managing cultural diversity and organizational alignment;
|
|
•
|
exposure to the unique characteristics of each region in the global market, which can cause capital equipment investment patterns to vary significantly from period to period;
|
|
•
|
periodic local or international economic downturns;
|
|
•
|
potential adverse tax consequences, including withholding tax rules that may limit the repatriation of our earnings, and higher effective income tax rates in foreign countries where we do business;
|
|
•
|
compliance with customs regulations in the countries in which we do business;
|
|
•
|
tariffs or other trade barriers (including those applied to our products or to parts and supplies that we purchase);
|
|
•
|
political instability, natural disasters, legal or regulatory changes, acts of war or terrorism in regions where we have operations or where we do business;
|
29
|
•
|
fluctuations in interest and currency exchange rates may adversely impact our ability to compete on price with local providers or the value of revenues we generate from our international business. Although we attempt to manage some of our near-term currency risks through the use of hedging instruments, there can be no assurance that such efforts will be adequate;
|
|
•
|
longer payment cycles and difficulties in collecting accounts receivable outside of the United States;
|
|
•
|
difficulties in managing foreign distributors (including monitoring and ensuring our distributors’ compliance with applicable laws); and
|
|
•
|
inadequate protection or enforcement of our intellectual property and other legal rights in foreign jurisdictions.
|
In addition, government controls, either by the United States or other countries, that restrict our business overseas or the import or export of our products or increase the cost of our operations through the imposition of tariffs or otherwise, could harm our business. For example, effective on October 30, 2018, the United States Department of Commerce added Fujian Jinhua Integrated Circuit Company, Ltd. (“JHICC”) to its entity list, restricting exports of technology to JHICC without a license. As a result, unless JHICC is subsequently removed from the entity list, we will be unable to fulfill orders JHICC has made for our products, accept future orders placed by JHICC for our products, and provide services for any of our products already installed at JHICC.
Any of the factors above could have a significant negative impact on our business and results of operations.
We are exposed to risks associated with a weakening in the condition of the financial markets and the global economy.
Demand for our products is ultimately driven by the global demand for electronic devices by consumers and businesses. Economic uncertainty frequently leads to reduced consumer and business spending, which caused our customers to decrease, cancel or delay their equipment and service orders from us in the economic slowdown during fiscal year 2009. In addition, the tightening of credit markets and concerns regarding the availability of credit that accompanied that slowdown made it more difficult for our customers to raise capital, whether debt or equity, to finance their purchases of capital equipment, including the products we sell. Reduced demand, combined with delays in our customers’ ability to obtain financing (or the unavailability of such financing), has at times in the past adversely affected our product and service sales and revenues and therefore has harmed our business and operating results, and our operating results and financial condition may again be adversely impacted if economic conditions decline from their current levels.
In addition, a decline in the condition of the global financial markets could adversely impact the market values or liquidity of our investments. Our investment portfolio includes corporate and government securities, money market funds and other types of debt and equity investments. Although we believe our portfolio continues to be comprised of sound investments due to the quality and (where applicable) credit ratings, a decline in the capital and financial markets would adversely impact the market value of our investments and their liquidity. If the market value of such investments were to decline, or if we were to have to sell some of our investments under illiquid market conditions, we may be required to recognize an impairment charge on such investments or a loss on such sales, either of which could have an adverse effect on our financial condition and operating results.
If we are unable to timely and appropriately adapt to changes resulting from difficult macroeconomic conditions, our business, financial condition or results of operations may be materially and adversely affected.
30
We might be involved in claims or disputes related to intellectual property or other confidential information that may be costly to resolve, prevent us from selling or using the challenged technology and seriously harm our operating results and financial condition.
As is typical in the industries in which we serve, from time to time we have received communications from other parties asserting the existence of patent rights, copyrights, trademark rights or other intellectual property rights which they believe cover certain of our products, processes, technologies or information. In addition, we occasionally receive notification from customers who believe that we owe them indemnification or other obligations related to intellectual property claims made against such customers by third parties. With respect to intellectual property infringement disputes, our customary practice is to evaluate such infringement assertions and to consider whether to seek licenses where appropriate. However, there can be no assurance that licenses can be obtained or, if obtained, will be on acceptable terms or that costly litigation or other administrative proceedings will not occur. The inability to obtain necessary licenses or other rights on reasonable terms could seriously harm our results of operations and financial condition. Furthermore, we may potentially be subject to claims by customers, suppliers or other business partners, or by governmental law enforcement agencies, related to our receipt, distribution and/or use of third-party intellectual property or confidential information. Legal proceedings and claims, regardless of their merit, and associated internal investigations with respect to intellectual property or confidential information disputes are often expensive to prosecute, defend or conduct; may divert management’s attention and other company resources; and/or may result in restrictions on our ability to sell our products, settlements on significantly adverse terms or adverse judgments for damages, injunctive relief, penalties and fines, any of which could have a significant negative effect on our business, results of operations and financial condition. There can be no assurance regarding the outcome of future legal proceedings, claims or investigations. The instigation of legal proceedings or claims, our inability to favorably resolve or settle such proceedings or claims, or the determination of any adverse findings against us or any of our employees in connection with such proceedings or claims could materially and adversely affect our business, financial condition and results of operations, as well as our business reputation.
We are exposed to various risks related to the legal, regulatory and tax environments in which we perform our operations and conduct our business.
We are subject to various risks related to compliance with new, existing, different, inconsistent or even conflicting laws, rules and regulations enacted by legislative bodies and/or regulatory agencies in the countries in which we operate and with which we must comply, including environmental, safety, antitrust, anti-corruption/anti-bribery, unclaimed property and export control regulations. Our failure or inability to comply with existing or future laws, rules or regulations, or changes to existing laws, rules or regulations (including changes that result in inconsistent or conflicting laws, rules or regulations), in the countries in which we operate could result in violations of contractual or regulatory obligations that may adversely affect our operating results, financial condition and ability to conduct our business. From time to time, we may receive inquiries or audit notices from governmental or regulatory bodies, or we may participate in voluntary disclosure programs, related to legal, regulatory or tax compliance matters, and these inquiries, notices or programs may result in significant financial cost (including investigation expenses, defense costs, assessments and penalties), reputational harm and other consequences that could materially and adversely affect our operating results and financial condition.
Our properties and many aspects of our business operations are subject to various domestic and international environmental laws and regulations, including those that control and restrict the use, transportation, emission, discharge, storage and disposal of certain chemicals, gases and other substances. Any failure to comply with applicable environmental laws, regulations or requirements may subject us to a range of consequences, including fines, suspension of certain of our business activities, limitations on our ability to sell our products, obligations to remediate environmental contamination, and criminal and civil liabilities or other sanctions. In addition, changes in environmental regulations (including regulations relating to climate change and greenhouse gas emissions) could require us to invest in potentially costly pollution control equipment, alter our manufacturing processes or use substitute (potentially more expensive and/or rarer) materials. Further, we use hazardous and other regulated materials that subject us to risks of strict liability for damages caused by any release, regardless of fault. We also face increasing complexity in our manufacturing, product design and procurement operations as we adjust to new and prospective requirements relating to the materials composition of our products, including restrictions on lead and other substances and requirements to track the sources of certain metals and other materials. The cost of complying, or of failing to comply, with these and other regulatory restrictions or contractual obligations could adversely affect our operating results, financial condition and ability to conduct our business.
31
In addition, we may from time to time be involved in legal proceedings or claims regarding employment, immigration, contracts, product performance, product liability, antitrust, environmental regulations, securities, unfair competition and other matters. These legal proceedings and claims, regardless of their merit, may be time-consuming and expensive to prosecute or defend, divert management’s attention and resources, and/or inhibit our ability to sell our products. There can be no assurance regarding the outcome of current or future legal proceedings or claims, which could adversely affect our operating results, financial condition and ability to operate our business.
We depend on key personnel to manage our business effectively, and if we are unable to attract, retain and motivate our key employees, our sales and product development could be harmed.
Our employees are vital to our success, and our key management, engineering and other employees are difficult to replace. We generally do not have employment contracts with our key employees. Further, we do not maintain key person life insurance on any of our employees. The expansion of high technology companies worldwide has increased demand and competition for qualified personnel.
If we are unable to attract and
retain key personnel, or if we are not able to attract, assimilate and retain additional highly qualified employees to meet our current and future needs, our business and operations could be harmed.
We outsource a number of services to third-party service providers, which decreases our control over the performance of these functions. Disruptions or delays at our third-party service providers could adversely impact our operations.
We outsource a number of services, including our transportation, information systems management and logistics management of spare parts and certain accounting and procurement functions, to domestic and overseas third-party service providers. While outsourcing arrangements may lower our cost of operations, they also reduce our direct control over the services rendered. It is uncertain what effect such diminished control will have on the quality or quantity of products delivered or services rendered, on our ability to quickly respond to changing market conditions, or on our ability to ensure compliance with all applicable domestic and foreign laws and regulations. In addition, many of these outsourced service providers, including certain hosted software applications that we use for confidential data storage, employ cloud computing technology for such storage. These providers’ cloud computing systems may be susceptible to “cyber incidents,” such as intentional cyber attacks aimed at theft of sensitive data or inadvertent cyber-security compromises, which are outside of our control. If we do not effectively develop and manage our outsourcing strategies, if required export and other governmental approvals are not timely obtained, if our third-party service providers do not perform as anticipated or do not adequately protect our data from cyber-related security breaches, or if there are delays or difficulties in enhancing business processes, we may experience operational difficulties (such as limitations on our ability to ship products), increased costs, manufacturing or service interruptions or delays, loss of intellectual property rights or other sensitive data, quality and compliance issues, and challenges in managing our product inventory or recording and reporting financial and management information, any of which could materially and adversely affect our business, financial condition and results of operations.
We are exposed to risks related to cybersecurity threats and cyber incidents.
In the conduct of our business, we collect, use, transmit and store data on information systems. This data includes confidential information, transactional information and intellectual property belonging to us, our customers and our business partners, as well as personally-identifiable information of individuals. We allocate significant resources to network security, data encryption and other measures to protect our information systems and data from unauthorized access or misuse. Despite our ongoing efforts to enhance our network security measures, our information systems are susceptible to computer viruses, cyber-related security breaches and similar disruptions from unauthorized intrusions, tampering, misuse, criminal acts, including phishing, or other events or developments that we may be unable to anticipate or fail to mitigate and are subject to the inherent vulnerabilities of network security measures. We have experienced cyber-related attacks in the past, and may experience cyber-related attacks in the future. Our security measures may also be breached due to employee errors, malfeasance, or otherwise. Third parties may also attempt to influence employees, users, suppliers or customers to disclose sensitive information in order to gain access to our, our customers’ or business partners’ data. Because the techniques used to obtain unauthorized access to the information systems change frequently, and may not be recognized until launched against a target, we may be unable to anticipate these techniques or to implement adequate preventative measures.
Any of such occurrences could result in disruptions to our operations; misappropriation, corruption or theft of confidential information, including intellectual property and other critical data, of KLA, our customers and other business partners; misappropriation of funds and company assets; reduced value of our investments in research, development and engineering; litigation with, or payment of damages to, third parties; reputational damage; costs to comply with regulatory inquiries or actions; data privacy issues; costs to rebuild our internal information systems; and increased cybersecurity protection and remediation costs.
32
We carry insurance that provides some protection against the potential losses arising from a cybersecurity incident but it will not likely cover all such losses, and the losses that it does not cover may be significant.
We rely upon certain critical information systems for our daily business operations. Our inability to use or access our information systems at critical points in time could unfavorably impact our business operations.
Our global operations are dependent upon certain information systems, including telecommunications, the internet, our corporate intranet, network communications, email and various computer hardware and software applications. System failures or malfunctioning, such as difficulties with our customer relationship management (“CRM”) system, could disrupt our operations and our ability to timely and accurately process and report key components of our financial results. Our enterprise resource planning (“ERP”) system is integral to our ability to accurately and efficiently maintain our books and records, record transactions, provide critical information to our management, and prepare our financial statements. Any disruptions or difficulties that may occur in connection with our ERP system or other systems (whether in connection with the regular operation, periodic enhancements, modifications or upgrades of such systems or the integration of our acquired businesses into such systems) could adversely affect our ability to complete important business processes, such as the evaluation of our internal control over financial reporting pursuant to Section 404 of the Sarbanes-Oxley Act of 2002. Any of these events could have an adverse effect on our business, operating results and financial condition.
Acquisitions are an important element of our strategy but, because of the uncertainties involved, we may not find suitable acquisition candidates and we may not be able to successfully integrate and manage acquired businesses. We are also exposed to risks in connection with strategic alliances into which we may enter.
In addition to our efforts to develop new technologies from internal sources, part of our growth strategy is to pursue acquisitions and acquire new technologies from external sources. As part of this effort, in February 2019, we announced that we had consummated our acquisition of Orbotech. We may also enter into definitive agreements for and consummate acquisitions of, or significant investments in, businesses with complementary products, services and/or technologies. There can be no assurance that we will find suitable acquisition candidates or that acquisitions we complete will be successful. In addition, we may use equity to finance future acquisitions, which would increase our number of shares outstanding and be dilutive to current stockholders.
If we are unable to successfully integrate and manage acquired businesses, if the costs associated with integrating the acquired business exceeds our expectations, or if acquired businesses perform poorly, then our business and financial results may suffer. It is possible that the businesses we have acquired, as well as businesses that we may acquire in the future, may perform worse than expected or prove to be more difficult to integrate and manage than anticipated. In addition, we may lose key employees of the acquired companies. As a result, risks associated with acquisition transactions may lead to a material adverse effect on our business and financial results for a number of reasons, including:
|
•
|
we may have to devote unanticipated financial and management resources to acquired businesses;
|
|
•
|
the combination of businesses may result in the loss of key personnel or an interruption of, or loss of momentum in, the activities of our company and/or the acquired business;
|
|
•
|
we may not be able to realize expected operating efficiencies or product integration benefits from our acquisitions;
|
|
•
|
we may experience challenges in entering into new market segments for which we have not previously manufactured and sold products;
|
|
•
|
we may face difficulties in coordinating geographically separated organizations, systems and facilities;
|
|
•
|
the customers, distributors, suppliers, employees and others with whom the companies we acquire have business dealings may have a potentially adverse reaction to the acquisition;
|
|
•
|
we may have difficulty implementing a cohesive framework of internal controls over the entire organization;
|
|
•
|
we may have to write-off goodwill or other intangible assets; and
|
|
•
|
we may incur unforeseen obligations or liabilities in connection with acquisitions.
|
At times, we may also enter into strategic alliances with customers, suppliers or other business partners with respect to development of technology and intellectual property. These alliances typically require significant investments of capital and exchange of proprietary, highly sensitive information. The success of these alliances depends on various factors over which we may have limited or no control and requires ongoing and effective cooperation with our strategic partners. Mergers and acquisitions and strategic alliances are inherently subject to significant risks, and the inability to effectively manage these risks could materially and adversely affect our business, financial condition and operating results.
33
Disruption of our manufacturing facilities or other operations, or in the operations of our customers, due to earthquake, flood, other natural catastrophic events, health epidemics or terrorism could result in cancellation of orders, delays in deliveries or other business activities, or loss of customers and could seriously harm our business.
We have significant manufacturing operations in the United States, Singapore, Israel, Germany, United Kingdom, Italy, and China. In addition, our business is international in nature, with our sales, service and administrative personnel and our customers located in numerous countries throughout the world. Operations at our manufacturing facilities and our assembly subcontractors, as well as our other operations and those of our customers, are subject to disruption for a variety of reasons, including work stoppages, acts of war, terrorism, health epidemics, fire, earthquake, volcanic eruptions, energy shortages, flooding or other natural disasters. Such disruption could cause delays in, among other things, shipments of products to our customers, our ability to perform services requested by our customers, or the installation and acceptance of our products at customer sites. We cannot provide any assurance that alternate means of conducting our operations (whether through alternate production capacity or service providers or otherwise) would be available if a major disruption were to occur or that, if such alternate means were available, they could be obtained on favorable terms.
In addition, as part of our cost-cutting actions, we have consolidated several operating facilities. Our California operations are now primarily centralized in our Milpitas facility. The consolidation of our California operations into a single campus could further concentrate the risks related to any of the disruptive events described above, such as acts of war or terrorism, earthquakes, fires or other natural disasters, if any such event were to impact our Milpitas facility.
We are predominantly uninsured for losses and interruptions caused by terrorist acts and acts of war. If international political instability continues or increases, our business and results of operations could be harmed.
The threat of terrorism targeted at, or acts of war in, the regions of the world in which we do business increases the uncertainty in our markets. Any act of terrorism or war that affects the economy or the industries we serve could adversely affect our business. Increased international political instability in various parts of the world, disruption in air transportation and further enhanced security measures as a result of terrorist attacks may hinder our ability to do business and may increase our costs of operations. We maintain significant operations in Israel. Since the establishment of the State of Israel in 1948, a number of armed conflicts have taken place between Israel and its Arab neighbors, and a state of hostility varying in degree and intensity, has led to security and economic challenges for Israel. In addition, some our employees in Israel are obligated to perform annual reserve duty in the Israel Defense Forces, and may be called to active military duty in emergency circumstances. We cannot assess the impact that emergency conditions in Israel in the future may have on our business, operations, financial condition or results of operations, but it could be material. Instability in any region could directly impact our ability to operate our business (or our customers’ ability to operate their businesses), cause us to incur increased costs in transportation, make such transportation unreliable, increase our insurance costs, and cause international currency markets to fluctuate. Instability in the region could also have the same effects on our suppliers and their ability to timely deliver their products. If international political instability continues or increases in any region in which we do business, our business and results of operations could be harmed. We are predominantly uninsured for losses and interruptions caused by terrorist acts and acts of war.
We self-insure certain risks including earthquake risk. If one or more of the uninsured events occurs, we could suffer major financial loss.
We purchase insurance to help mitigate the economic impact of certain insurable risks; however, certain risks are uninsurable, are insurable only at significant cost or cannot be mitigated with insurance. Accordingly, we may experience a loss that is not covered by insurance, either because we do not carry applicable insurance or because the loss exceeds the applicable policy amount or is less than the deductible amount of the applicable policy. For example, we do not currently hold earthquake insurance. An earthquake could significantly disrupt our manufacturing operations, a significant portion of which are conducted in California, an area highly susceptible to earthquakes. It could also significantly delay our research and engineering efforts on new products, much of which is also conducted in California. We take steps to minimize the damage that would be caused by an earthquake, but there is no certainty that our efforts will prove successful in the event of an earthquake. We self-insure earthquake risks because we believe this is a prudent financial decision based on our cash reserves and the high cost and limited coverage available in the earthquake insurance market. Certain other risks are also self-insured either based on a similar cost-benefit analysis, or based on the unavailability of insurance. If one or more of the uninsured events occurs, we could suffer major financial loss.
34
We are exposed to foreign currency exchange rate fluctuations. Although we hedge certain currency risks, we may still be adversely affected by changes in foreign currency exchange rates or declining economic conditions in these countries.
We have some exposure to fluctuations in foreign currency exchange rates, primarily the Japanese Yen, the euro, the pound sterling and the Israeli new shekel. We have international subsidiaries that operate and sell our products globally. In addition, an increasing proportion of our manufacturing activities are conducted outside of the United States, and many of the costs associated with such activities are denominated in foreign currencies. We routinely hedge our exposures to certain foreign currencies with certain financial institutions in an effort to minimize the impact of certain currency exchange rate fluctuations, but these hedges may be inadequate to protect us from currency exchange rate fluctuations. To the extent that these hedges are inadequate, or if there are significant currency exchange rate fluctuations in currencies for which we do not have hedges in place, our reported financial results or the way we conduct our business could be adversely affected. Furthermore, if a financial counterparty to our hedges experiences financial difficulties or is otherwise unable to honor the terms of the foreign currency hedge, we may experience material financial losses.
We are exposed to fluctuations in interest rates and the market values of our portfolio investments; impairment of our investments could harm our earnings. In addition, we and our stockholders are exposed to risks related to the volatility of the market for our common stock.
Our investment portfolio primarily consists of both corporate and government debt securities that are susceptible to changes in market interest rates and bond yields. As market interest rates and bond yields increase, those securities with a lower yield-at-cost show a mark-to-market unrealized loss. We believe we have the ability to realize the full value of all these investments upon maturity. However, an impairment of the fair market value of our investments, even if unrealized, must be reflected in our financial statements for the applicable period and may therefore have a material adverse effect on our results of operations for that period.
In addition, the market price for our common stock is volatile and has fluctuated significantly during recent years. The trading price of our common stock could continue to be highly volatile and fluctuate widely in response to various factors, including without limitation conditions in the semiconductor industry and other industries in which we operate, fluctuations in the global economy or capital markets, our operating results or other performance metrics, or adverse consequences experienced by us as a result of any of the risks described elsewhere in this Item 1A. Volatility in the market price of our common stock could cause an investor in our common stock to experience a loss on the value of their investment in us and could also adversely impact our ability to raise capital through the sale of our common stock or to use our common stock as consideration to acquire other companies.
We are exposed to risks in connection with tax and regulatory compliance audits in various jurisdictions.
We are subject to tax and regulatory compliance audits (such as related to customs or product safety requirements) in various jurisdictions, and such jurisdictions may assess additional income or other taxes, penalties, fines or other prohibitions against us. Although we believe our tax estimates are reasonable and that our products and practices comply with applicable regulations, the final determination of any such audit and any related litigation could be materially different from our historical income tax provisions and accruals related to income taxes and other contingencies. In addition to and in connection with the Israel Tax Authority (“ITA”) Assessment described in more detail in Note 13, “Income Taxes” to our Consolidated Financial Statements, there is an ongoing criminal investigation against our Orbotech subsidiary, certain of its employees and its tax consultant that began prior to the Acquisition Date. We can make no assurances that an indictment will not result from the criminal investigation. The results of an audit or litigation could have a material adverse effect on our operating results or cash flows in the period or periods for which that determination is made.
A change in our effective tax rate can have a significant adverse impact on our business.
We earn profits in, and are therefore potentially subject to taxes in, the U.S. and numerous foreign jurisdictions, including Singapore, Israel and the Cayman Islands, the countries in which we earn the majority of our non-U.S. profits. Due to economic, political or other conditions, tax rates in those jurisdictions may be subject to significant change. A number of factors may adversely impact our future effective tax rates, such as the jurisdictions in which our profits are determined to be earned and taxed; changes in the tax rates imposed by those jurisdictions; expiration of tax holidays in certain jurisdictions that are not renewed; the resolution of issues arising from tax audits with various tax authorities; changes in the valuation of our deferred tax assets and liabilities; adjustments to estimated taxes upon finalization of various tax returns; increases in expenses not deductible for tax purposes, including write-offs of acquired in-process research and development and impairment of goodwill in connection with acquisitions; changes in available tax credits; changes in stock-based compensation expense; changes in tax laws or the interpretation of such tax laws; changes in generally accepted accounting principles; and the repatriation of earnings from outside the U.S. for which we have not previously provided for U.S. taxes. A change in our effective tax rate can materially and adversely impact our results from operations.
35
In addition, recent changes to U.S. tax laws will significantly impact how U.S. multinational corporations are taxed on foreign earnings. Numerous countries are evaluating their existing tax laws due in part, to recommendations made by the Organization for Economic Co-operation and Development’s (“OECD’s”) Base Erosion and Profit Shifting (“BEPS”) project. As of December 31, 2018, we have completed our accounting for the tax effects of the Act, which was enacted into law on December 22, 2017. However, the recent U.S. tax law changes are subject to future guidance from U.S. federal and state governments, such as the Treasury Department and/or the IRS. Any future guidance can change our tax liability. A significant portion of the income taxes due to the enactment of the Act is payable by us over a period of eight years. As a result, our cash flows from operating activities will be adversely impacted until tax liability is paid in full.
Compliance with federal securities laws, rules and regulations, as well as NASDAQ requirements, has become increasingly complex, and the significant attention and expense we must devote to those areas may have an adverse impact on our business.
Federal securities laws, rules and regulations, as well as NASDAQ rules and regulations, require companies to maintain extensive corporate governance measures, impose comprehensive reporting and disclosure requirements, set strict independence and financial expertise standards for audit and other committee members and impose civil and criminal penalties for companies and their chief executive officers, chief financial officers and directors for securities law violations. These laws, rules and regulations have increased, and in the future are expected to continue to increase, the scope, complexity and cost of our corporate governance, reporting and disclosure practices, which could harm our results of operations and divert management’s attention from business operations.
A change in accounting standards or practices or a change in existing taxation rules or practices (or changes in interpretations of such standards, practices or rules) can have a significant effect on our reported results and may even affect reporting of transactions completed before the change is effective.
New accounting standards and taxation rules and varying interpretations of accounting pronouncements and taxation rules have occurred and will continue to occur in the future. Changes to (or revised interpretations or applications of) existing accounting standards or tax rules or the questioning of current or past practices may adversely affect our reported financial results or the way we conduct our business. For example, in February 2016, the FASB issued an accounting standard update which amends the existing accounting standards for leases. Adoption of new standards may require changes to our processes, accounting systems, and internal controls. Difficulties encountered during adoption could result in internal control deficiencies or delay the reporting of our financial results. In addition, the passing of the Act in December 2017 caused us to significantly increase our provision for income taxes, which had a material adverse effect on our net income for the fiscal year ended June 30, 2018. Further interpretations of the Act from the government and regulatory organizations may change our tax expense provided for our transitional tax liability and deferred tax adjustments as well as our provision liability or accounting treatment of the provisional liability which may potentially affect the measurement of these balances or potentially give rise to new deferred tax amounts.
|
ITEM 1B.
|
UNRESOLVED STAFF COMMENTS
|
None.
36
|
ITEM 2.
|
PROPERTIES
|
Our headquarters are located in Milpitas, California. As of
June 30, 2019
, we owned or leased a total of approximately 3.4 million square feet of space for research, engineering, marketing, service, sales and administration worldwide primarily in U.S., Israel, China, Singapore, Germany and Taiwan. Our operating leases expire at various times through November 7, 2028, subject to renewal, with some of the leases containing renewal option clauses at the fair market value, for additional periods up to five years. Additional information regarding these leases is incorporated herein by reference to Note 14, “Commitments and Contingencies” to the Consolidated Financial Statements. We believe our properties are adequately maintained and suitable for their intended use and that our production facilities have capacity adequate for our current needs.
Information regarding our principal properties as of
June 30, 2019
is set forth below:
__________________
|
(Square Feet)
|
United States
|
Other Countries
|
Total
|
|||||
|
Owned
(1)
|
727,302
|
|
695,048
|
|
1,422,350
|
|
||
|
Leased
|
426,535
|
|
1,519,614
|
|
1,946,149
|
|
||
|
Total
|
1,153,837
|
|
2,214,662
|
|
3,368,499
|
|
||
|
(1)
|
Includes 248,155 square feet of property owned at out location in Serangoon, Singapore, where the land on which this building resides is leased.
|
|
ITEM 3.
|
LEGAL PROCEEDINGS
|
The information set forth below under Note 15, “Litigation and Other Legal Matters” to the Consolidated Financial Statements is incorporated herein by reference.
|
ITEM 4.
|
MINE SAFETY DISCLOSURES
|
Not applicable.
37
PART II
|
ITEM 5.
|
MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
|
Our common stock is listed and traded on the NASDAQ Global Select Market under the symbol “KLAC.”
On August 1, 2019, we announced that our Board of Directors had declared a quarterly cash dividend of $0.75 per share to be paid on September 3, 2019 to stockholders of record as of the close of business on August 15, 2019.
As of
July 19, 2019
, there were
383
holders of record of our common stock.
Equity Repurchase Plans
The following is a summary of stock repurchases for each month during the fourth quarter of the fiscal year ended
June 30, 2019
(1)
:
|
Period
|
Total Number of
Shares Purchased (1) |
Average Price Paid
per Share |
Approximate Dollar Value that May
Yet Be Purchased Under the Plans or Programs (2) |
|||||||
|
April 1, 2019 to April 30, 2019
|
507,700
|
|
$
|
123.81
|
|
$
|
1,142,833,354
|
|
||
|
May 1, 2019 to May 31, 2019
|
1,693,619
|
|
$
|
109.10
|
|
$
|
958,067,283
|
|
||
|
June 1, 2019 to June 30, 2019
|
899,092
|
|
$
|
110.53
|
|
$
|
858,692,904
|
|
||
|
Total
|
3,100,411
|
|
$
|
111.92
|
|
|||||
__________________
|
(1)
|
Our Board of Directors authorized a program which permits us to repurchase up to $2.00 billion of our common stock, reflecting an increase from $1.00 billion upon the close of the Orbotech Acquisition. Shares are reported based on the trade date of the applicable repurchase.
|
|
(2)
|
The stock repurchase program has no expiration date and may be suspended at any time. Future repurchases of our common stock under our repurchase program may be effected through various different repurchase transaction structures, including isolated open market transactions or systematic repurchase plans.
|
38
Stock Performance Graph and Cumulative Total Return
Notwithstanding any statement to the contrary in any of our previous or future filings with the Securities and Exchange Commission, the following information relating to the price performance of our common stock shall not be deemed “filed” with the Commission or “soliciting material” under the Securities Exchange Act of 1934 and shall not be incorporated by reference into any such filings.
The following graph compares the cumulative 5-year total return attained by stockholders on our common stock relative to the cumulative total returns of the S&P 500 Index and the Philadelphia Semiconductor Index (PHLX). The graph tracks the performance of a $100 investment in our common stock and in each of the indices (with the reinvestment of all dividends) from June 30, 2014 to
June 30, 2019
.
|
June 2014
|
June 2015
|
June 2016
|
June 2017
|
June 2018
|
June 2019
|
||||||
|
KLA Corporation
|
$100.00
|
$99.11
|
$133.57
|
$171.34
|
$196.71
|
$233.26
|
|||||
|
S&P 500
|
$100.00
|
$107.42
|
$111.71
|
$131.70
|
$150.64
|
$166.33
|
|||||
|
PHLX Semiconductor
|
$100.00
|
$108.97
|
$113.07
|
$172.12
|
$222.22
|
$251.80
|
|||||
Our fiscal year ends June 30. The comparisons in the graph above are based upon historical data and are not necessarily indicative of, nor intended to forecast, future stock price performance.
39
|
ITEM 6.
|
SELECTED FINANCIAL DATA
|
The following tables include selected consolidated summary financial data for each of our last five fiscal years. This data should be read in conjunction with Item 8, “Financial Statements and Supplementary Data,” and Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in this Annual Report on Form 10-K.
|
Year ended June 30,
|
|||||||||||||||||||
|
(In thousands, except per share amounts)
|
2019
|
2018
|
2017
|
2016
|
2015
|
||||||||||||||
|
Consolidated Statements of Operations
(1)(2)
:
|
|||||||||||||||||||
|
Total revenues
|
$
|
4,568,904
|
|
$
|
4,036,701
|
|
$
|
3,480,014
|
|
$
|
2,984,493
|
|
$
|
2,814,049
|
|
||||
|
Net income attributable to KLA
(3)
|
$
|
1,175,617
|
|
$
|
802,265
|
|
$
|
926,076
|
|
$
|
704,422
|
|
$
|
366,158
|
|
||||
|
Cash dividends declared per share (including a special cash dividend of $16.50 per share declared during the three months ended December 31, 2014)
|
$
|
3.00
|
|
$
|
2.52
|
|
$
|
2.14
|
|
$
|
2.08
|
|
$
|
18.50
|
|
||||
|
Net income per share attributable to KLA:
|
|||||||||||||||||||
|
Basic
|
$
|
7.53
|
|
$
|
5.13
|
|
$
|
5.92
|
|
$
|
4.52
|
|
$
|
2.26
|
|
||||
|
Diluted
|
$
|
7.49
|
|
$
|
5.10
|
|
$
|
5.88
|
|
$
|
4.49
|
|
$
|
2.24
|
|
||||
|
As of June 30,
|
|||||||||||||||||||
|
2019
|
2018
|
2017
|
2016
|
2015
|
|||||||||||||||
|
Consolidated Balance Sheets
(1)(2)
:
|
|||||||||||||||||||
|
Cash, cash equivalents and marketable securities
|
$
|
1,739,385
|
|
$
|
2,880,318
|
|
$
|
3,016,740
|
|
$
|
2,491,294
|
|
$
|
2,387,111
|
|
||||
|
Working capital
(4)
|
$
|
2,546,589
|
|
$
|
3,334,730
|
|
$
|
3,102,094
|
|
$
|
2,868,062
|
|
$
|
2,904,758
|
|
||||
|
Total assets
|
$
|
9,008,516
|
|
$
|
5,638,619
|
|
$
|
5,550,334
|
|
$
|
4,977,076
|
|
$
|
4,841,023
|
|
||||
|
Long-term debt
(5)
|
$
|
3,173,383
|
|
$
|
2,237,402
|
|
$
|
2,680,474
|
|
$
|
3,057,936
|
|
$
|
3,173,435
|
|
||||
|
Total KLA stockholders’ equity
(5)
|
$
|
2,659,108
|
|
$
|
1,620,511
|
|
$
|
1,326,417
|
|
$
|
689,114
|
|
$
|
421,439
|
|
||||
__________
|
(1)
|
On July 1, 2018, we adopted ASC 606 using the modified retrospective transition approach. Results for reporting periods beginning after June 30, 2018 are presented under ASC 606, while prior period amounts are not adjusted and continue to be reported in accordance with the previous revenue guidance in ASC 605. Refer to Note 2, “Revenue” to our Consolidated Financial Statements for additional details.
|
|
(2)
|
On February 20, 2019, we completed the acquisition of Orbotech for total purchase consideration of approximately
$3.26 billion
. The operating results of Orbotech have been included in our Consolidated Financial Statements for the fiscal year ended
June 30, 2019
from the Acquisition Date. For additional details, refer to Note 6 “Business Combinations” to our Consolidated Financial Statements.
|
|
(3)
|
Our net income decreased to
$802.3
million in the fiscal year ended June 30, 2018, primarily as a result of the income tax effects from the enacted tax reform legislation through the Tax Cuts and Jobs Act, which was signed into law on December 22, 2017. Our net income was
$366.2 million
in the fiscal year ended June 30, 2015, primarily as a result of the impact of the pre-tax net loss of
$131.7 million
for the loss on extinguishment of debt and certain one-time expenses of
$2.5 million
associated with the leveraged recapitalization that was completed during the three months ended December 31, 2014.
|
|
(4)
|
We adopted the accounting standards update regarding classification of deferred taxes on a prospective basis at the beginning of the fourth quarter of fiscal year ended 2016. Upon adoption, approximately $218.0 million in net current deferred tax assets were reclassified to noncurrent. No prior periods were retrospectively adjusted.
|
|
(5)
|
Our long-term debt increased to
$3.17 billion
at the end of fiscal year ended June 30, 2019, because we issued $1.20 billion aggregate principal amount of senior, unsecured long-term notes. Refer to Note 8, “Debt” to our Consolidated Financial Statements for additional details. Our total stockholders’ equity decreased to $421.4 million at the end of fiscal year ended June 30, 2015, because, as part of our leveraged recapitalization plan, we declared a special cash dividend of approximately $2.76 billion. Refer to Note 9, “Equity, Long-term Incentive Compensation Plans and Non-Controlling Interest” to the Consolidated Financial Statements for additional details.
|
40
|
ITEM 7.
|
MANAGEMENT
’
S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
|
The following discussion of our financial condition and results of operations should be read in conjunction with our Consolidated Financial Statements and the related notes included in Item 8, “Financial Statements and Supplementary Data,” in this Annual Report on Form 10-K. This discussion contains forward-looking statements, which involve risks and uncertainties. Our actual results could differ materially from those anticipated in the forward-looking statements as a result of certain factors, including but not limited to those discussed in Item 1A, “Risk Factors” and elsewhere in this Annual Report on Form 10-K. (See “Special Note Regarding Forward-Looking Statements”). Pursuant to the FAST Act Modernization and Simplification of Regulation S-K, discussions related to the changes in results of operations from fiscal year 2018 to fiscal year 2017 have been omitted. Such omitted discussion can be found under Item 7 of our annual Form 10-K for the fiscal year ended June 30, 2018, filed with the SEC.
EXECUTIVE SUMMARY
We are a leading supplier of process control and yield management solutions for the semiconductor and related nanoelectronics industries. Our broad portfolio of inspection and metrology products, and related service, software and other offerings primarily supports integrated circuit (“IC” or “chip”) manufacturers throughout the entire semiconductor fabrication process, from research and development to final volume production. We provide leading edge equipment, software and support that enable IC manufacturers to identify, resolve and manage significant advanced technology manufacturing process challenges and obtain higher finished product yields at lower overall cost. In addition to serving the semiconductor industry, we also provide a range of technology solutions to a number of other high technology industries, including
advanced packaging, light emitting diode (
“
LED
”), power devices, compound semiconductor, and data storage industries, as well as general materials research.
Our products and services are used by the vast majority of bare wafer, IC, lithography reticle (“reticle” or “mask”) and hard disk drive manufacturers around the world. Our products, services and expertise are used by our customers to measure, detect, analyze and resolve critical product defects that arise in that environment in order to control nanometric level manufacturing processes.
Our revenues are driven largely by our customers’ spending on capital equipment and related maintenance services necessary to support key transitions in their underlying product technologies, or to increase their production volumes in response to market demand or expansion plans. Our semiconductor customers generally operate in one or more of the three major semiconductor markets - memory, foundry and logic. All three of these markets are characterized by rapid technological changes and sudden shifts in end-user demand, which influence the level and pattern of our customers’ spending on our products and services. Although capital spending in all three semiconductor markets has historically been very cyclical, the demand for more advanced and lower cost chips used in a growing number of consumer electronics, communications, data processing, and industrial and automotive products has resulted over the long term in a favorable demand environment for our process control and yield management solutions, particularly in the foundry and logic markets, which have higher levels of process control adoption than the memory market.
Through the acquisition of Orbotech, Ltd. (“Orbotech”), we have expanded our reach in the electronics value chain to include technologically advanced, yield-enhancing and process-enabling solutions to address various manufacturing stages of Printed Circuit Boards (“PCB”), Flat Panel Displays (“FPD”), Specialty Semiconductor Devices (“SD”) and other electronic components. The products include Automated Optical Inspection (“AOI”), Automated Optical Shaping (“AOS”), Direct Imaging (“DI”), additive printing, laser drilling, laser plotters, Computer aided manufacturing (“CAM”) and engineering solutions for PCB and additional adjacent electronics component manufacturing, as well as AOI, test, repair and process monitoring systems for FPD manufacturing and vacuum process tools for etch, Physical Vapor Deposition (“PVD”), Molecular Vapor Deposition (“MVD”) and Chemical Vapor Deposition (“CVD”) solutions for SD manufacturing.
In our newly acquired Orbotech business, consumer end markets have been experiencing a fundamental shift in technology complexity, driven primarily by the proliferation of high-end mobile devices and automotive devices, as well as by the demand for large area FPDs such as large-size LCD televisions and OLED displays. The shift towards 5G connectivity and the fast-paced growth of the Internet of Things (“IoT”) services is expected to continue to further accelerate this shift as more devices become connected and dependent upon other electronic devices.
41
As a supplier to the global semiconductor, semiconductor-related and electronics industries, our customer base continues to become more highly concentrated over time, thereby increasing the potential impact of a sudden change in capital spending by a major customer on our revenues and profitability. As our customer base becomes increasingly more concentrated, large orders from a relatively limited number of customers account for a substantial portion of our sales, which potentially exposes us to more volatility for revenues and earnings. In the global semiconductor and electronics related industries, China is emerging as a major region for manufacturing of logic and memory chips, adding to its role as the world’s largest consumer of ICs. Additionally, a significant portion of global FPD and PCB manufacturing has migrated to China. Government initiatives are propelling China to expand its domestic manufacturing capacity and attracting semiconductor manufacturers from Taiwan, Korea, Japan and the US. China is currently seen as an important long-term growth region for the semiconductor and electronics capital equipment sector. We are also subject to the cyclical capital spending that has historically characterized the semiconductor, semiconductor-related and electronics industries. The timing, length, intensity and volatility of the capacity-oriented capital spending cycles of our customers are unpredictable.
The semiconductor and electronics industries have also been characterized by constant technological innovation. Currently, there are multiple drivers for growth in the industry with increased demand for chips providing computation power and connectivity for Artificial Intelligence (“AI”) applications and support for mobile devices at the leading edge of foundry and logic chip manufacturing. Qualification of early extreme ultraviolet (“EUV”) lithography processes and equipment is driving growth at leading logic/foundry and dynamic random-access memory (“DRAM”) manufacturers. Expansion of IoT together with increasing acceptance of advanced driver assistance systems (“ADAS”) in anticipation of the introduction of autonomous cars have begun to accelerate legacy-node technology conversions and capacity expansions. Intertwined in these areas, spurred by data storage and connectivity needs, is the growth in demand for memory chips. On the other hand, higher design costs for the most advanced ICs could economically constrain leading-edge manufacturing technology customers to focus their resources on only the large technologically advanced products and applications. We believe that, over the long term, our customers will continue to invest in advanced technologies and new materials to enable smaller design rules and higher density applications that fuel demand for process control equipment, although the growth for such equipment may be adversely impacted by higher design costs for advanced ICs, reuse of installed products, and delays in production ramps by our customers in response to higher costs and technical challenges at more advanced technology nodes.
Additionally, current trends in smart mobile devices, 5G connectivity, automotive electronics, smart vehicles, flexible displays, AR/VR and wearable devices, high-performance computing, large size televisions and the IoT are expected to drive the need for production, inspection, test and repair solutions that are able to address the cutting-edge technology embedded in these types of electronic products.
The demand for our products and our revenue levels are driven by our customers’ needs to solve the process challenges that they face as they adopt new technologies required to fabricate advanced ICs that are incorporated into sophisticated mobile devices. Our customers continuously seek to increase yields and enhance the efficiency of their manufacturing processes, including by improving their manufacturing, inspection, testing and repair capabilities.
Subsequent to the Orbotech Acquisition, we changed our organizational structure resulting in four reportable segments: Semiconductor Process Control, Specialty Semiconductor Process, PCB, Display and Component Inspection, and Other. Prior period results have been recast to conform to the current presentation.
Our view of the current wafer fab equipment demand climate is aligned with consensus industry analyst expectations for the calendar year 2019, which reflects a decline in capital equipment spending by memory customers. In contrast to the memory business, capital equipment spending by foundry and logic customers at the leading edge has begun to ramp up, and the momentum is expected to continue in calendar year 2019. We have already seen our mix of business begin to shift toward increased purchases by logic and foundry customers as a percentage of total sales, and we expect spending from these customers to continue to remain strong. Because of a more diversified semiconductor device-end demand, and disciplined capacity planning by wafer fab equipment customers, we believe the long-term growth dynamics for the industry remain strong. While manufacturers of PCBs, FPDs, SDs and other electronic components create different products for diverse end-markets, they share similar production challenges in an increasingly competitive environment.
42
The following table sets forth some of our key consolidated financial information for each of our last three fiscal years
(1)
:
|
|
Year ended June 30,
|
||||||||||
|
(Dollar amounts in thousands, except diluted net income per share)
|
2019
|
2018
|
2017
|
||||||||
|
Total revenues
|
$
|
4,568,904
|
|
$
|
4,036,701
|
|
$
|
3,480,014
|
|
||
|
Costs of revenues
|
$
|
1,869,377
|
|
$
|
1,446,041
|
|
$
|
1,286,215
|
|
||
|
Gross margin percentage
|
59
|
%
|
64
|
%
|
63
|
%
|
|||||
|
Net income attributable to KLA
(2)
|
$
|
1,175,617
|
|
$
|
802,265
|
|
$
|
926,076
|
|
||
|
Diluted net income per share attributable to KLA
|
$
|
7.49
|
|
$
|
5.10
|
|
$
|
5.88
|
|
||
__________________
|
(1)
|
On July 1, 2018, we adopted ASC 606 using the modified retrospective transition approach. Results for reporting periods beginning after June 30, 2018 are presented under ASC 606, while prior period amounts are not adjusted and continue to be reported in accordance with the previous revenue guidance in ASC 605.
|
|
(2)
|
Our net income attributable to KLA decreased to
$802.3
million in the fiscal year ended June 30, 2018, primarily as a result of the income tax effects from the enacted tax reform legislation through the Tax Cuts and Jobs Act, which was signed into law on December 22, 2017.
|
Total revenues during the fiscal year ended
June 30, 2019
increased by
13%
compared to the fiscal year ended
June 30, 2018
. Our year over year revenue growth reflected strong demand in the semiconductor process control market, growth in service revenues, and additional revenues from the Orbotech business which was acquired in the fiscal year ended June 30, 2019.
Acquisition of Orbotech, Ltd.
On February 20, 2019, we completed the acquisition of Orbotech for total purchase consideration of approximately
$3.26
billion. Orbotech’s core business enables electronic device manufacturers to inspect, test and measure printed circuit boards and flat panel displays to verify their quality; pattern electronic circuitry on substrate and perform three-dimensional shaping of metalized circuits on multiple surfaces; and utilize advanced vacuum deposition and etching process in semiconductor device and semiconductor manufacturing and to perform laser drilling of electronic substrates. For additional details on the financial statement impacts of the Orbotech acquisition, refer to Note 6 “Business Combinations” to our Consolidated Financial Statements.
In addition, our Board of Directors has authorized a share repurchase of up to $2.00 billion of our common stock, reflecting an increase from $1.00 billion upon the close of the Orbotech Acquisition. We raised approximately $1.20 billion in new long-term debt financing to partially refinance our existing debt, to repurchase shares and for general corporate purposes. For additional details, refer to Note 8, “Debt”, and Note 10, “Stock Repurchase Program” to our Consolidated Financial Statements.
CRITICAL ACCOUNTING ESTIMATES AND POLICIES
The preparation of our Consolidated Financial Statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions in applying our accounting policies that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent assets and liabilities. We base these estimates and assumptions on historical experience and evaluate them on an ongoing basis to ensure that they remain reasonable under current conditions. Actual results could differ from those estimates. We discuss the development and selection of the critical accounting estimates with the Audit Committee of our Board of Directors on a quarterly basis, and the Audit Committee has reviewed our related disclosure in this Annual Report on Form 10-K. The accounting policies that reflect our more significant estimates, judgments and assumptions and which we believe are the most critical to aid in fully understanding and evaluating our reported financial results include the following:
Revenue Recognition.
We primarily derive revenue from the sale of process control and yield management solutions for the semiconductor and related nanoelectronics industries, maintenance and support of all these products, installation and training services and the sale of spare parts. Our solutions provide a comprehensive portfolio of inspection, metrology and data analytics products, which are accompanied by a flexible portfolio of services to enable our customers to maintain the performance and productivity of the solutions purchased. The acquisition of Orbotech enabled us to broaden our portfolio to include the yield enhancement and production solutions used by manufacturers of printed circuit boards, flat panel displays, advanced packaging, micro-electro-mechanical systems and other electronic components.
43
Our solutions are generally not sold with a right of return, nor have we experienced significant returns from or refunds to our customers.
We account for a contract with a customer when there is approval and commitment from both parties, the rights of the parties are identified, payment terms are identified, the contract has commercial substance and collectibility of consideration is probable.
Our revenues are measured based on consideration stipulated in the arrangement with each customer, net of any sales incentives and amounts collected on behalf of third parties, such as sales taxes. The revenues are recognized as separate performance obligations that are satisfied by transferring control of the product or service to the customer.
Our arrangements with our customers include various combinations of products and services, which are generally capable of being distinct and accounted for as separate performance obligations. A product or service is considered distinct if it is separately identifiable from other deliverables in the arrangement and if a customer can benefit from it on its own or with other resources that are readily available to the customer.
The transaction consideration, including any sales incentives, is allocated between separate performance obligations of an arrangement based on the stand-alone selling prices (“SSP”) for each distinct product or service. Management considers a variety of factors to determine the SSP, such as, historical standalone sales of products and services, discounting strategies and other observable data.
From time to time, our contracts are modified to account for additional, or to change existing, performance obligations. Our contract modifications are generally accounted for prospectively.
Product Revenue
We recognize revenue from product sales at a point in time when we have satisfied our performance obligation by transferring control of the product to the customer. We use judgment to evaluate whether the control has transferred by considering several indicators, including:
|
•
|
whether we have a present right to payment;
|
|
•
|
the customer has legal title;
|
|
•
|
the customer has physical possession;
|
|
•
|
the customer has significant risk and rewards of ownership; and
|
|
•
|
the customer has accepted the product, or whether customer acceptance is considered a formality based on history of acceptance of similar products (for example, when the customer has previously accepted the same tool, with the same specifications, and when we can objectively demonstrate that the tool meets all of the required acceptance criteria, and when the installation of the system is deemed perfunctory).
|
Not all of the indicators need to be met for us to conclude that control has transferred to the customer. In circumstances in which revenue is recognized prior to the product acceptance, the portion of revenue associated with our performance obligations to install product is deferred and recognized upon acceptance.
We enter into volume purchase agreements with some of our customers. We adjust the transaction consideration for estimated credits earned by our customers for such incentives. These credits are estimated based upon the forecasted and actual product sales for any given period and agreed-upon incentive rate. The estimate is updated at each reporting period.
We offer perpetual and term licenses for defects and data analysis software. The primary difference between perpetual and term licenses is the duration over which the customer can benefit from the use of the software, while the functionality and the features of the software are the same. With the acquisition of Orbotech we offer computer-aided manufacturing and engineering software solutions for the printed circuit boards production. Software is generally bundled with post-contract customer support (“PCS”), which includes unspecified software updates that are made available throughout the entire term of the arrangement. Revenue from software licenses is recognized at a point in time, when the software is made available to the customer. Revenue from PCS is deferred at contract inception and recognized ratably over the service period, or as services are performed.
44
Services and Spare Parts Revenue
The majority of product sales include a standard 6 to 12-month warranty that is not separately paid for by the customers. The customers may also purchase extended warranty for periods beyond the initial year as part of the initial product sale. We have concluded that the standard 12-month warranty as well as any extended warranty periods included in the initial product sales are separate performance obligations. The estimated fair value of warranty services is deferred and recognized ratably as revenue over the warranty period, as the customer simultaneously receives and consumes the benefits of warranty services provided by us.
Additionally, we offer product maintenance and support services, which the customer may purchase separately from the standard and extended warranty offered as part of the initial product sale. Revenue from separately negotiated maintenance and support service contracts is also recognized over time based on the terms of the applicable service period. Revenue from services performed in the absence of a maintenance contract, including training revenue, is recognized when the related services are performed. We also sell spare parts, revenue from which is recognized when control over the spare parts is transferred to the customer.
Installation services include connecting and validating configuration of the product. In addition, several testing protocols are completed to confirm the equipment is performing to customer specifications. Revenues from product installation are deferred and recognized at a point in time, once installation is complete.
Significant Judgments
Our contracts with our customers often include promises to transfer multiple products and services. Each product and service is generally capable of being distinct within the context of the contract and represents a separate performance obligation. Determining the SSP for each distinct performance obligation and allocation of consideration from an arrangement to the individual performance obligations and the appropriate timing of revenue recognition are significant judgments with respect to these arrangements. We typically estimate the SSP of products and services based on observable transactions when the products and services are sold on a standalone basis and those prices fall within a reasonable range. We typically have more than one SSP for individual products and services due to the stratification of these products by customers and circumstances. In these instances, we use information such as the size of the customer, geographic region, as well as customization of the products in determining the SSP. In instances where the SSP is not directly observable, we determine the SSP using information that includes market conditions, entity-specific factors, including discounting strategies, information about the customer or class of customer that is reasonably available and other observable inputs. While changes in the allocation of SSP between performance obligations will not affect the amount of total revenue recognized for a particular contract, any material changes could impact the timing of revenue recognition, which could have a material effect on our financial position and result of operations.
Although the products are generally not sold with a right of return, we may provide other credits or sales incentives, which are accounted for either as variable consideration or material right, depending on the specific terms and conditions of the arrangement. These credits and incentives are estimated at contract inception and updated at the end of each reporting period if and when additional information becomes available.
As outlined above, we use judgments to evaluate whether or not the customer has obtained control of the product and considers the several indicators in evaluating whether or not control has transferred to the customer. Not all of the indicators need to be met for us to conclude that control has transferred to the customer.
Contract Assets/Liabilities
The timing of revenue recognition, billings and cash collections may result in accounts receivable, contract assets, and contract liabilities (deferred revenue) on our Consolidated Balance Sheets. A receivable is recorded in the period we deliver products or provide services when we have an unconditional right to payment. Contract assets primarily relate to the value of products and services transferred to the customer for which the right to payment is not just dependent on the passage of time. Contract assets are transferred to receivable when rights to payment become unconditional.
A contract liability is recognized when we receive payment or have an unconditional right to payment in advance of the satisfaction of performance. The contract liabilities represent (1) deferred product revenue related to the value of products that have been shipped and billed to customers and for which the control has not been transferred to the customers, and (2) deferred service revenue, which is recorded when we receive consideration, or such consideration is unconditionally due, from a customer prior to transferring services to the customer under the terms of a contract. Deferred service revenue typically results from warranty services, and maintenance and other service contracts.
45
Contract assets and liabilities related to rights and obligations in a contract are recorded net in the Consolidated Balance Sheets. Upon the adoption of ASC 606, deferred costs of revenue are included in other current assets while under the legacy guidance deferred costs of revenue was included in deferred system profit.
Business Combinations.
Accounting for business combinations requires management to make significant estimates and assumptions to determine the fair values of assets acquired and liabilities assumed at the acquisition date. Although we believe the assumptions and estimates we have made in the past have been reasonable and appropriate, they are based, in part, on historical experience and information obtained from management of the acquired companies and are inherently uncertain. Critical estimates in valuing certain acquired intangible assets include, but are not limited to future expected cash flows including revenue growth rate assumptions from product sales, customer contracts and acquired technologies, expected costs to develop in-process research and development into commercially viable products, estimated cash flows from the projects when completed, including assumptions associated with the technology migration curve, estimated royalty rates used in valuing technology related intangible assets, and discount rates. The discount rates used to discount expected future cash flows to present value are typically derived from a weighted-average cost of capital analysis and adjusted to reflect inherent risks. Unanticipated events and circumstances may occur that could affect either the accuracy or validity of such assumptions, estimates or actual results.
We allocate the fair value of the purchase price of our acquisitions to the tangible assets acquired, liabilities assumed, and intangible assets acquired, including in-process research and development (“IPR&D”), based on their estimated fair values. The excess of the fair value of the purchase price over the fair values of these net tangible and intangible assets acquired is recorded as goodwill. Management’s estimates of fair value are based upon assumptions believed to be reasonable, but our estimates and assumptions are inherently uncertain and subject to refinement. As a result, during the measurement period, which will not exceed one year from the acquisition date, we record adjustments to the assets acquired and liabilities assumed with the corresponding offset to goodwill. Upon the conclusion of the measurement period or final determination of the fair value of the purchase price of our acquisitions, whichever comes first, any subsequent adjustments are recorded to our Consolidated Statements of Operations.
The fair value of IPR&D is initially capitalized as an intangible asset with an indefinite life and assessed for impairment thereafter whenever events or changes in circumstances indicate that the carrying value of the IPR&D assets may not be recoverable. Impairment of IPR&D is recorded to research and development expenses. When an IPR&D project is completed, the IPR&D is reclassified as an amortizable purchased intangible asset and amortized to costs of revenues over the asset’s estimated useful life.
Acquisition-related expenses are recognized separately from the business combination and are expensed as incurred.
Inventories.
Inventories are stated at the lower of cost (on a first-in, first-out basis) or net realizable value. Net realizable value is the estimated selling prices in the ordinary course of business, less reasonably predictable costs of completion, disposal and transportation. Demonstration units are stated at their manufacturing cost and written down to their net realizable value. We review and set standard costs semi-annually at current manufacturing costs in order to approximate actual costs. Our manufacturing overhead standards for product costs are calculated assuming full absorption of forecasted spending over projected volumes, adjusted for excess capacity. Abnormal inventory costs such as costs of idle facilities, excess freight and handling costs, and spoilage are recognized as current period charges. We write down product inventory based on forecasted demand and technological obsolescence and service spare parts inventory based on forecasted usage. These factors are impacted by market and economic conditions, technology changes, new product introductions and changes in strategic direction and require estimates that may include uncertain elements. Actual demand may differ from forecasted demand, and such differences may have a material effect on recorded inventory values.
Allowance for Doubtful Accounts.
A majority of our accounts receivable are derived from sales to large multinational semiconductor manufacturers throughout the world. In order to monitor potential credit losses, we perform ongoing credit evaluations of our customers’ financial condition. An allowance for doubtful accounts is maintained for probable credit losses based upon our assessment of the expected collectibility of the accounts receivable. The allowance for doubtful accounts is reviewed on a quarterly basis to assess the adequacy of the allowance. We take into consideration (1) any circumstances of which we are aware of a customer’s inability to meet its financial obligations; and (2) our judgments as to prevailing economic conditions in the industry and their impact on our customers. If circumstances change, such that the financial conditions of our customers are adversely affected and they are unable to meet their financial obligations to us, we may need to record additional allowances, which would result in a reduction of our net income.
46
Accounting for Stock-Based Compensation Plans.
We account for stock-based awards granted to employees for services based on the fair value of those awards. The fair value of stock-based awards is measured at the grant date and is recognized as expense over the employee’s requisite service period. The fair value for restricted stock units granted without “dividend equivalent” rights is determined using the closing price of our common stock on the grant date, adjusted to exclude the present value of dividends which are not accrued on the restricted stock units. The fair value for restricted stock units granted with “dividend equivalent” rights is determined using the closing price of our common stock on the grant date. The award holder is not entitled to receive payments under dividend equivalent rights unless the associated restricted stock unit award vests (i.e., the award holder is entitled to receive credits, payable in cash or shares of our common stock, equal to the cash dividends that would have been received on the shares of our common stock underlying the restricted stock units had the shares been issued and outstanding on the dividend record date, but such dividend equivalents are only paid subject to the recipient satisfying the vesting requirements of the underlying award). Compensation expense for restricted stock units with performance metrics is calculated based upon expected achievement of the metrics specified in the grant, or when a grant contains a market condition, the grant date fair value using a Monte Carlo simulation. The Monte Carlo simulation incorporates estimates of the potential outcomes of the market condition on the grant date fair value of each award. Additionally, we estimate forfeitures based on historical experience and revise those estimates in subsequent periods if actual forfeitures differ from the estimated amounts. The fair value is determined using a Black-Scholes valuation model for purchase rights under our Employee Stock Purchase Plan. The Black-Scholes option-pricing model requires the input of assumptions, including the option’s expected term and the expected price volatility of the underlying stock. The expected stock price volatility assumption is based on the market-based historical implied volatility from traded options of our common stock.
Contingencies and Litigation.
We are subject to the possibility of losses from various contingencies. Considerable judgment is necessary to estimate the probability and amount of any loss from such contingencies. An accrual is made when it is probable that a liability has been incurred or an asset has been impaired and the amount of loss can be reasonably estimated. We accrue a liability and recognize as expense the estimated costs expected to be incurred to defend or settle asserted and unasserted claims existing as of the balance sheet date. See Note 14, “Commitments and Contingencies” and Note 15, “Litigation and Other Legal Matters” to our Consolidated Financial Statements for additional details.
Goodwill and Purchased Intangible Assets.
We assess goodwill for impairment annually as well as whenever events or changes in circumstances indicate that the carrying value may not be recoverable. Long-lived purchased intangible assets are tested for impairment whenever events or changes in circumstances indicate that their carrying amounts may not be recoverable. See Note 7, “Goodwill and Purchased Intangible Assets” to the Consolidated Financial Statements for additional details. Goodwill represents the excess of the purchase price over the fair value of the net tangible and identifiable intangible assets acquired in each business combination. We performed our annual qualitative assessment of the goodwill by reporting unit during the third quarter of the fiscal year ended June 30,
2019
and concluded that there was no impairment. In addition, as a result of the Orbotech Acquisition, we updated our organizational structure and performed a qualitative assessment of the goodwill for our reporting units, which were impacted by the organizational change, and concluded that there were no impairment indicators affecting the valuation of goodwill subsequent to our annual impairment test. The next annual evaluation of the goodwill by reporting unit will be performed in the third quarter of the fiscal year ending June 30,
2020
.
If we were to encounter challenging economic conditions, such as a decline in our operating results, an unfavorable industry or macroeconomic environment, a substantial decline in our stock price, or any other adverse change in market conditions, we may be required to perform quantitative goodwill impairment analysis. In addition, if such conditions have the effect of changing one of the critical assumptions or estimates we use to calculate the value of our goodwill or intangible assets, we may be required to record goodwill and/or intangible asset impairment charges in future periods, whether in connection with our next annual impairment assessment or prior to that, if any triggering event occurs outside of the quarter during which the annual goodwill impairment assessment is performed. It is not possible at this time to determine if any such future impairment charge would occur or, if it does, whether such charge would be material to our results of operations.
Income Taxes.
We account for income taxes in accordance with the authoritative guidance, which requires income tax effects for changes in tax laws are recognized in the period in which the law is enacted.
Transition tax liability is recognized in the period when the change in the U.S. tax law was enacted and the income tax effects are recorded as a component of provision for income taxes from continuing operations. Several inputs were considered in the calculation, such as the calculation of the post-1986 foreign earnings and profit (“E&P”), income tax pools for all foreign subsidiaries, and the amount of those earnings held in cash and other specified assets. We applied the current interpretations from the U.S. federal and state governments and regulatory organization in its calculation of the transition tax liability.
47
Deferred tax assets and liabilities are recognized using enacted tax rates for the effect of temporary differences between the book and tax bases of recorded assets and liabilities. The guidance also requires that deferred tax assets be reduced by a valuation allowance if it is more likely than not that a portion of the deferred tax asset will not be realized. We have determined that a valuation allowance is necessary against a portion of the deferred tax assets, but we anticipate that our future taxable income will be sufficient to recover the remainder of our deferred tax assets. However, should there be a change in our ability to recover our deferred tax assets that are not subject to a valuation allowance, we could be required to record an additional valuation allowance against such deferred tax assets. This would result in an increase to our tax provision in the period in which we determine that the recovery is not probable.
On a quarterly basis, we provide for income taxes based upon an estimated annual effective income tax rate. The effective tax rate is highly dependent upon the geographic composition of worldwide earnings, tax regulations governing each region, availability of tax credits and the effectiveness of our tax planning strategies. We carefully monitor the changes in many factors and adjust our effective income tax rate on a timely basis. If actual results differ from these estimates, this could have a material effect on our financial condition and results of operations.
The calculation of our tax liabilities involves dealing with uncertainties in the application of complex tax regulations. In accordance with the authoritative guidance on accounting for uncertainty in income taxes, we recognize liabilities for uncertain tax positions based on the two-step process. The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates that it is more likely than not that the position will be sustained in audit, including resolution of related appeals or litigation processes, if any. The second step is to measure the tax benefit as the largest amount that is more than 50% likely of being realized upon ultimate settlement. We reevaluate these uncertain tax positions on a quarterly basis. This evaluation is based on factors including, but not limited to, changes in facts or circumstances, changes in tax law, effectively settled issues under audit and new audit activity. Any change in these factors could result in the recognition of a tax benefit or an additional charge to the tax provision.
We record income taxes on the undistributed earnings of foreign subsidiaries unless the subsidiaries’ earnings are considered indefinitely reinvested outside the U.S. Our effective tax rate would be adversely affected if we change our intent or if such undistributed earnings are needed for U.S. operations because we would be required to provide or pay income taxes on some or all of these undistributed earnings.
Global Intangible Low-Taxed Income.
The Tax Cuts and Jobs Act (the “Act”) includes provisions for Global Intangible Low-Taxed Income (“GILTI”) wherein taxes on foreign income are imposed in excess of a deemed return on tangible assets of foreign corporations. This income will effectively be taxed at a 10.5% tax rate in general. As a result, our deferred tax assets and liabilities were being evaluated to determine if the deferred tax assets and liabilities should be recognized for the basis differences expected to reverse as a result of GILTI provisions that are effective for us after the fiscal year ending June 30, 2018, or should the tax on GILTI provisions be recognized as period costs in each year incurred. We elected to account for GILTI as a component of current period tax expense starting from the first quarter of the fiscal year ending June 30, 2019.
Valuation of Marketable Securities.
Our investments in available-for-sale securities are reported at fair value. Unrealized gains related to increases in the fair value of investments and unrealized losses related to decreases in the fair value are included in accumulated other comprehensive income (loss), net of tax, as reported on our Consolidated Statements of Stockholders’ Equity. However, changes in the fair value of investments impact our net income only when such investments are sold or an impairment charge is recognized. Realized gains and losses on the sale of securities are determined by specific identification of the security’s cost basis. We periodically review our investment portfolio to determine if any investment is other-than-temporarily impaired due to changes in credit risk or other potential valuation concerns, which would require us to record an impairment charge in the period during which any such determination is made. In making this judgment, we evaluate, among other things, the duration of the investment, the extent to which the fair value of an investment is less than its cost, the credit rating and any changes in credit rating for the investment, default and loss rates of the underlying collateral, structure and credit enhancements to determine if a credit loss may exist. Our assessment that an investment is not other-than-temporarily impaired could change in the future due to new developments or changes in our strategies or assumptions related to any particular investment.
Recent Accounting Pronouncements
For a description of recent accounting pronouncements, including those recently adopted and the expected dates of adoption as well as estimated effects, if any, on our Consolidated Financial Statements of those not yet adopted, see Note 1, “Description of Business and Summary of Significant Accounting Policies” of the notes to our Consolidated Financial Statements.
48
RESULTS OF OPERATIONS
Revenues and Gross Margin
On July 1, 2018, we adopted ASC 606 using the modified retrospective transition approach. Results for reporting periods beginning after June 30, 2018 are presented under ASC 606, while prior period amounts are presented under legacy guidance. For additional details, refer to Note 2 “Revenue” to our Consolidated Financial Statements.
|
|
Year ended June 30,
|
|
|
|
|
||||||||||||||||||||
|
(Dollar amounts in thousands)
|
2019
|
2018
|
2017
|
FY19 vs. FY18
|
FY18 vs. FY17
|
||||||||||||||||||||
|
Revenues:
|
|||||||||||||||||||||||||
|
Product
|
$
|
3,392,243
|
|
$
|
3,160,671
|
|
$
|
2,703,934
|
|
$
|
231,572
|
|
7
|
%
|
$
|
456,737
|
|
17
|
%
|
||||||
|
Service
|
1,176,661
|
|
876,030
|
|
776,080
|
|
300,631
|
|
34
|
%
|
99,950
|
|
13
|
%
|
|||||||||||
|
Total revenues
|
$
|
4,568,904
|
|
$
|
4,036,701
|
|
$
|
3,480,014
|
|
$
|
532,203
|
|
13
|
%
|
$
|
556,687
|
|
16
|
%
|
||||||
|
Costs of revenues
|
$
|
1,869,377
|
|
$
|
1,446,041
|
|
$
|
1,286,215
|
|
$
|
423,336
|
|
29
|
%
|
$
|
159,826
|
|
12
|
%
|
||||||
|
Gross margin percentage
|
59
|
%
|
64
|
%
|
63
|
%
|
(5
|
)%
|
1
|
%
|
|||||||||||||||
Product revenues
Our business is affected by the concentration of our customer base and our customers’ capital equipment procurement schedules as a result of their investment plans. Our product revenues in any particular period are significantly impacted by the amount of new orders that we receive during that period and, depending upon the duration of manufacturing and installation cycles, in the preceding period.
The increase in product revenues by 7% in the fiscal year ended
June 30, 2019
compared to the prior year is primarily attributable to product revenue from our newly acquired Orbotech business, increased investments from our foundry and wafer customers, and a favorable impact from the adoption of ASC 606 due to our earlier timing of transfer of control, partially offset by a lower products shipments to customers in the memory business.
Service revenues
Service revenues are generated from product maintenance and support services, as well as billable time and material service calls made to our customers. The amount of our service revenues is typically a function of the number of systems installed at our customers’ sites and the utilization of those systems, but it is also impacted by other factors, such as our rate of service contract renewals, the types of systems being serviced and fluctuations in foreign exchange rates.
The increase in service revenues by 34% in the fiscal year ended
June 30, 2019
compared to the prior year is primarily attributable to service revenues from our newly acquired Orbotech business, the impact of adoption of ASC 606 whereby revenue from the standard warranty represents a separate performance obligation and included in our services revenue, and an increase in the number of systems installed at our customers’ sites.
Revenues by segment
(1)
|
|
Year ended June 30,
|
|
|
|
|
||||||||||||||||||||
|
(Dollar amounts in thousands)
|
2019
|
2018
|
2017
|
FY19 vs. FY18
|
FY18 vs. FY17
|
||||||||||||||||||||
|
Revenues:
|
|||||||||||||||||||||||||
|
Semiconductor Process Control
|
$
|
4,080,822
|
|
$
|
3,944,015
|
|
$
|
3,408,876
|
|
$
|
136,807
|
|
3
|
%
|
$
|
535,139
|
|
16
|
%
|
||||||
|
Specialty Semiconductor Process
|
151,164
|
|
—
|
|
—
|
|
151,164
|
|
(3)
|
|
—
|
|
(3)
|
|
|||||||||||
|
PCB, Display and Component Inspection
(2)
|
332,810
|
|
92,516
|
|
71,557
|
|
240,294
|
|
(3)
|
|
20,959
|
|
(3)
|
|
|||||||||||
|
Other
|
4,676
|
|
—
|
|
—
|
|
4,676
|
|
(3)
|
|
—
|
|
(3)
|
|
|||||||||||
|
Total revenues
|
$
|
4,569,472
|
|
$
|
4,036,531
|
|
$
|
3,480,433
|
|
$
|
532,941
|
|
(3)
|
|
$
|
556,098
|
|
(3)
|
|
||||||
__________
|
(1)
|
Segment revenues exclude corporate allocation and the effects of foreign exchange rates. For additional details, refer to Note 17, “Segment Reporting and Geographic Information” to our Consolidated Financial Statements.
|
|
(2)
|
Segment revenues for the fiscal years ended June 30, 2018 and 2017 include the component inspection business only.
|
|
(3)
|
No meaningful comparative information exists for the prior periods.
|
49
Fiscal Year 2019 compared with Fiscal Year 2018
Revenue from our Semiconductor Process Control segment increased by 3% primarily due to a strong demand from our customers in the patterning business, and growth in service revenues. The increase in revenues from Specialty Semiconductor Process, PCB, Display and Component Inspection and Other segments primarily relates to the Orbotech business which was acquired in February of 2019.
Fiscal Year 2018 compared with Fiscal Year 2017
Revenue from our Semiconductor Process Control segment increased by 16%, primarily due to increases from sales of both our wafer inspection and patterning products as our customers continue to invest in the process control and services, and an increase in the number of post-warranty systems installed at our customers’ sites over this time period.
Revenues - Top Customers
The following customers each accounted for more than 10% of our total revenues primarily in Semiconductor Process Control segment for the indicated periods:
|
Year ended June 30,
|
||||
|
2019
|
2018
|
2017
|
||
|
Taiwan Semiconductor Manufacturing Company Limited
|
Samsung Electronics Co., Ltd.
|
Samsung Electronics Co., Ltd.
|
||
|
|
|
Taiwan Semiconductor Manufacturing Company Limited
|
||
Revenues by region
Revenues by region for the periods indicated were as follows:
|
|
Year ended June 30,
|
|||||||||||||||||||
|
(Dollar amounts in thousands)
|
2019
|
2018
|
2017
|
|||||||||||||||||
|
China
|
$
|
1,215,807
|
|
27
|
%
|
$
|
643,033
|
|
16
|
%
|
$
|
412,098
|
|
12
|
%
|
|||||
|
Taiwan
|
1,105,726
|
|
24
|
%
|
636,363
|
|
16
|
%
|
1,104,307
|
|
32
|
%
|
||||||||
|
North America
|
596,452
|
|
13
|
%
|
494,330
|
|
12
|
%
|
523,024
|
|
14
|
%
|
||||||||
|
Korea
|
584,091
|
|
13
|
%
|
1,178,601
|
|
29
|
%
|
688,094
|
|
20
|
%
|
||||||||
|
Japan
|
581,529
|
|
13
|
%
|
638,358
|
|
16
|
%
|
351,202
|
|
10
|
%
|
||||||||
|
Europe & Israel
|
305,924
|
|
7
|
%
|
300,883
|
|
7
|
%
|
263,789
|
|
8
|
%
|
||||||||
|
Rest of Asia
|
179,375
|
|
3
|
%
|
145,133
|
|
4
|
%
|
137,500
|
|
4
|
%
|
||||||||
|
Total
|
$
|
4,568,904
|
|
100
|
%
|
$
|
4,036,701
|
|
100
|
%
|
$
|
3,480,014
|
|
100
|
%
|
|||||
A significant portion of our revenues continues to be generated in Asia, where a substantial portion of the world’s semiconductor manufacturing capacity is located, and we expect that trend to continue.
Gross margin
Our gross margin fluctuates with revenue levels and product mix and is affected by variations in costs related to manufacturing and servicing our products, including our ability to scale our operations efficiently and effectively in response to prevailing business conditions.
50
The following table summarizes the major factors that contributed to the changes in gross margin percentage:
|
Gross Margin Percentage
|
||
|
Fiscal year ended June 30, 2017
|
63.0
|
%
|
|
Revenue volume of products and services
|
0.8
|
%
|
|
Mix of products and services sold
|
0.9
|
%
|
|
Manufacturing labor, overhead and efficiencies
|
(0.4
|
)%
|
|
Other service and manufacturing costs
|
(0.2
|
)%
|
|
Fiscal year ended June 30, 2018
|
64.1
|
%
|
|
Revenue volume of products and services
|
(1.0
|
)%
|
|
Mix of products and services sold
|
0.7
|
%
|
|
Manufacturing labor, overhead and efficiencies
|
(1.6
|
)%
|
|
Other service and manufacturing costs
|
(0.5
|
)%
|
|
Impact from acquisition of Orbotech
|
(2.6
|
)%
|
|
Fiscal year ended June 30, 2019
|
59.1
|
%
|
Changes in gross margin percentage, which are driven by the revenue volume of products and services, reflect our ability to leverage existing infrastructure to generate higher revenues. It also includes the effect of fluctuations in foreign exchange rates, average customer pricing and customer revenue deferrals associated with volume purchase agreements. Changes in gross margin percentage from the mix of products and services sold, reflect the impact of changes within the composition of product and service offerings, and amortization of inventory fair value adjustments from business combinations. Changes in gross margin percentage from manufacturing labor, overhead and efficiencies reflect our ability to manage costs and drive productivity as we scale our manufacturing activity to respond to customer requirements, and amortization of intangible assets. Changes in gross margin percentage from other service and manufacturing costs include the impact of customer support costs, including the efficiencies with which we deliver services to our customers, and the effectiveness with which we manage our production plans and inventory risk.
The decrease in our gross margin to
59.1%
from
64.1%
during the fiscal year ended June 30, 2019 is primarily attributable to the acquisition of Orbotech, which historically had lower product gross margins, an increase in service and manufacturing costs, and a lower revenue volume of products and services. These trends were partially offset by a favorable mix of products and services sold.
Segment gross margin
(1)
|
|
Year ended June 30,
|
|
|
|
|
||||||||||||||||||||
|
(Dollar amounts in thousands)
|
2019
|
2018
|
2017
|
FY19 vs. FY18
|
FY18 vs. FY17
|
||||||||||||||||||||
|
Segment gross margin:
|
|||||||||||||||||||||||||
|
Semiconductor Process Control
|
$
|
2,590,434
|
|
$
|
2,554,223
|
|
$
|
2,160,747
|
|
$
|
36,211
|
|
1
|
%
|
$
|
393,476
|
|
18
|
%
|
||||||
|
Specialty Semiconductor Process
|
78,800
|
|
—
|
|
—
|
|
78,800
|
|
(3)
|
|
—
|
|
(3)
|
|
|||||||||||
|
PCB, Display and Component Inspection
(2)
|
155,765
|
|
38,428
|
|
30,914
|
|
117,337
|
|
(3)
|
|
7,514
|
|
(3)
|
|
|||||||||||
|
Other
|
1,102
|
|
—
|
|
—
|
|
1,102
|
|
(3)
|
|
—
|
|
(3)
|
|
|||||||||||
|
$
|
2,826,101
|
|
$
|
2,592,651
|
|
$
|
2,191,661
|
|
$
|
233,450
|
|
(3)
|
|
$
|
400,990
|
|
(3)
|
|
|||||||
_________________
|
(1)
|
Segment gross margin is calculated as segment revenues less segment cost of revenues and excludes corporate allocation and the effects of foreign exchange rates, amortization of intangible assets, inventory fair value adjustments, and acquisition related costs. For additional details, refer to Note 17, “Segment Reporting and Geographic Information” to our Consolidated Financial Statements.
|
|
(2)
|
Segment gross margin in the fiscal year ended June 30, 2018 and 2017 include the component inspection business only.
|
|
(3)
|
No meaningful comparative information exists for the prior periods.
|
51
Fiscal Year 2019 compared with Fiscal Year 2018
The primary factors impacting the performance of our segment gross margins are summarized as follows:
|
•
|
Semiconductor Process Control segment gross margin remained relatively consistent from prior years.
|
|
•
|
The segment gross margins of Specialty Semiconductor Process, PCB, Display and Component Inspection and Other segments primarily relate to the Orbotech business, which was acquired in February 2019.
|
Fiscal Year 2018 compared with Fiscal Year 2017
The primary factors impacting the performance of our segment gross margins are summarized as follows:
|
•
|
Semiconductor Process Control segment gross margin increased primarily due to a favorable mix of products and services sold, a higher revenue volume of products and services, and lower customer support costs, partially offset by higher manufacturing and service costs to support increased volume of product shipments.
|
|
•
|
There were no segment gross margins in Specialty Semiconductor Process and Other segments as both segments relate to the Orbotech business, which was acquired in February 2019.
|
Research and Development (“R&D”)
|
|
Year ended June 30,
|
|
|
|
|
||||||||||||||||||||
|
(Dollar amounts in thousands)
|
2019
|
2018
|
2017
|
FY19 vs. FY18
|
FY18 vs. FY17
|
||||||||||||||||||||
|
R&D expenses
|
$
|
711,030
|
|
$
|
608,531
|
|
$
|
526,688
|
|
$
|
102,499
|
|
17
|
%
|
$
|
81,843
|
|
16
|
%
|
||||||
|
R&D expenses as a percentage of total revenues
|
16
|
%
|
15
|
%
|
15
|
%
|
1
|
%
|
—
|
%
|
|||||||||||||||
R&D expenses may fluctuate with product development phases and project timing as well as our R&D efforts. As technological innovation is essential to our success, we may incur significant costs associated with R&D projects, including compensation for engineering talent, engineering material costs, and other expenses.
R&D expenses during the fiscal year ended
June 30, 2019
were higher compared to the fiscal year ended
June 30, 2018
, primarily due to an increase in employee-related expenses of $36.2 million as a result of additional engineering headcount and higher employee benefit costs, an increase in depreciation expense of $5.1 million, and $55.7 million of expenses from the Orbotech business.
Our future operating results will depend significantly on our ability to produce products and provide services that have a competitive advantage in our marketplace. To do this, we believe that we must continue to make substantial and focused investments in our research and development. We remain committed to product development in new and emerging technologies.
Selling, General and Administrative (“SG&A”)
|
|
Year ended June 30,
|
|
|
|
|
||||||||||||||||||||
|
(Dollar amounts in thousands)
|
2019
|
2018
|
2017
|
FY19 vs. FY18
|
FY18 vs. FY17
|
||||||||||||||||||||
|
SG&A expenses
|
$
|
599,124
|
|
$
|
442,304
|
|
$
|
388,211
|
|
$
|
156,820
|
|
35
|
%
|
$
|
54,093
|
|
14
|
%
|
||||||
|
SG&A expenses as a percentage of total revenues
|
13
|
%
|
11
|
%
|
11
|
%
|
2
|
%
|
—
|
%
|
|||||||||||||||
SG&A expenses during the fiscal year ended
June 30, 2019
were higher compared to the fiscal year ended
June 30, 2018
, primarily due to an increase in employee-related expenses of $11.1 million as a result of additional headcount, and higher employee benefit costs, an increase in acquisition-related expenses of $22.0 million, $10.9 million of stock-based compensation expense acceleration for certain equity awards for Orbotech employees and $91.8 million of expenses from the Orbotech business, including $30.2 million of amortization expense for acquired intangible assets.
52
Interest Expense and Other Expense (Income), Net
|
|
Year ended June 30,
|
||||||||||
|
(Dollar amounts in thousands)
|
2019
|
2018
|
2017
|
||||||||
|
Interest expense
|
$
|
124,604
|
|
$
|
114,376
|
|
$
|
122,476
|
|
||
|
Other expense (income), net
|
$
|
(31,462
|
)
|
$
|
(30,482
|
)
|
$
|
(16,822
|
)
|
||
|
Interest expense as a percentage of total revenues
|
3
|
%
|
3
|
%
|
4
|
%
|
|||||
|
Other expense (income), net as a percentage of total revenues
|
1
|
%
|
1
|
%
|
—
|
%
|
|||||
The increase in interest expense during the fiscal year ended
June 30, 2019
compared to the fiscal year ended
June 30, 2018
, was primarily due to interest on the $1.20 billion Senior Notes issued in March 2019.
Other expense (income), net is comprised primarily of realized gains or losses on sales of marketable securities, gains or losses from revaluations of certain foreign currency denominated assets and liabilities as well as foreign currency contracts, and interest-related accruals (such as interest and penalty accruals related to our tax obligations) and interest income earned on our invested cash, cash equivalents and marketable securities.
The increase in other expense (income), net during the fiscal year ended
June 30, 2019
compared to the fiscal year ended
June 30, 2018
was primarily due to an increase in interest income of $3.7 million, partially offset by an increase in accruals related to uncertain tax positions of $2.6 million.
Provision for Income Taxes
The following table provides details of income taxes:
|
Year ended June 30,
|
|||||||||||
|
(Dollar amounts in thousands)
|
2019
|
2018
|
2017
|
||||||||
|
Income before income taxes
|
$
|
1,296,231
|
|
$
|
1,455,931
|
|
$
|
1,173,246
|
|
||
|
Provision for income taxes
|
$
|
121,214
|
|
$
|
653,666
|
|
$
|
247,170
|
|
||
|
Effective tax rate
|
9.4
|
%
|
44.9
|
%
|
21.1
|
%
|
|||||
Our effective tax rate during the fiscal years ended
June 30, 2019
and
June 30, 2018
was impacted by the Tax Cuts and Jobs Act (“the Act”), which was enacted into law on December 22, 2017. Income tax effects resulting from changes in tax laws are accounted for by us in accordance with the authoritative guidance, which requires that these tax effects be recognized in the period in which the law is enacted and the effects are recorded as a component of provision for income taxes from continuing operations. We have completed our accounting for the tax effects of the enactment of the Act. As a result, we recorded a tax benefit of $19.3 million during the year ended
June 30, 2019
relating to the transition tax liability provided by the Act.
Tax expense was lower as a percentage of income before taxes during the fiscal year ended
June 30, 2019
compared to the fiscal year ended
June 30, 2018
primarily due to the impact of the following items:
|
•
|
Tax expense decreased by
$49.9 million
relating to the reduction of the U.S. federal corporate tax rate from
28.1% to 21%
for the fiscal year ended
June 30, 2019
. The Act reduces the U.S. federal corporate tax rate from 35.0% to 21.0% as of January 1, 2018. The decrease in the U.S. federal corporate tax rate from 35.0% to 21.0% results in a blended statutory tax rate of 28.1% for the fiscal year ended
June 30, 2018
;
|
|
•
|
Tax expense decreased by $320.2 million relating to the one -time transition tax recorded during the fiscal year ended June 30, 2018 on our total post-1986 earnings and profits (“E&P”) of which, prior to the enactment of the Act, was previously deferred from U.S. income taxes; and
|
|
•
|
Tax expense decreased by
$102.1 million
relating to the one-time re-measurement of our deferred tax assets and liabilities recorded during the fiscal year ended June 30, 2018 based on the Act’s new corporate tax rate of 21.0%.
|
Our future effective income tax rate depends on various factors, such as tax legislation, the geographic composition of our pre-tax income, the amount of our pre-tax income as business activities fluctuate, non-deductible expenses incurred in connection with acquisitions, research and development credits as a percentage of aggregate pre-tax income, non-taxable or non-deductible increases or decreases in the assets held within our Executive Deferred Savings Plan, the tax effects of employee stock activity, and the effectiveness of our tax planning strategies.
53
In the normal course of business, we are subject to examination by tax authorities throughout the world. We are subject to federal income tax examinations for all years beginning from the fiscal year ended June 30, 2016 and are under U.S. federal income tax examination for the fiscal year ended June 30, 2016. We are subject to state income tax examinations for all years beginning from the fiscal year ended June 30, 2015. We are also subject to examinations in other major foreign jurisdictions, including Singapore and Israel, for all years beginning from the calendar year ended December 31, 2012. We are under audit in Germany related to Orbotech for the years ended December 31, 2013 to December 31, 2015. Although we believe our tax estimates are reasonable, the final determination of tax audits and any related litigation could be materially different from our historical income tax provisions and accruals. The results of an audit or litigation could have a material adverse effect on our results of operations or cash flows in the period or periods for which that determination is made.
In May 2017, Orbotech received an assessment from the ITA with respect to its fiscal years 2012 through 2014 (the “Assessment”, and the “Audit Period”, respectively), for an aggregate amount of tax against us, after offsetting all NOLs for tax purposes available through the end of 2014, of approximately NIS 218 million (approximately $61.0 million as of
June 30, 2019
), which amount includes related interest and linkage differentials to the Israeli consumer price index (as of date of the Assessment). We believe our recorded unrecognized tax benefits are sufficient to cover the resolution of the Assessment.
On August 31, 2018, Orbotech filed an objection in respect of the tax assessment (the “Objection”). Orbotech is now in the process of the second stage, in which the claims raised by it in the Objection are examined by different personnel at the Israel Tax Authority (“ITA”). In addition, the ITA can examine additional items and may assess additional amounts in the second stage. The second stage must be completed within one year of when the Objection was filed.
Liquidity and Capital Resources
|
As of June 30,
|
|||||||||||
|
(Dollar amounts in thousands)
|
2019
|
2018
|
2017
|
||||||||
|
Cash and cash equivalents
|
$
|
1,015,994
|
|
$
|
1,404,382
|
|
$
|
1,153,051
|
|
||
|
Marketable securities
|
723,391
|
|
1,475,936
|
|
1,863,689
|
|
|||||
|
Total cash, cash equivalents and marketable securities
|
$
|
1,739,385
|
|
$
|
2,880,318
|
|
$
|
3,016,740
|
|
||
|
Percentage of total assets
|
19
|
%
|
51
|
%
|
54
|
%
|
|||||
|
|
Year ended June 30,
|
||||||||||
|
(In thousands)
|
2019
|
2018
|
2017
|
||||||||
|
Cash flows:
|
|||||||||||
|
Net cash provided by operating activities
|
$
|
1,152,632
|
|
$
|
1,229,120
|
|
$
|
1,079,665
|
|
||
|
Net cash (used in) provided by investing activities
|
(1,180,982
|
)
|
291,618
|
|
(560,886
|
)
|
|||||
|
Net cash used in financing activities
|
(360,005
|
)
|
(1,270,103
|
)
|
(472,805
|
)
|
|||||
|
Effect of exchange rate changes on cash and cash equivalents
|
(33
|
)
|
696
|
|
(1,411
|
)
|
|||||
|
Net (decrease) increase in cash and cash equivalents
|
$
|
(388,388
|
)
|
$
|
251,331
|
|
$
|
44,563
|
|
||
Cash and Cash Equivalents and Marketable Securities:
As of
June 30, 2019
, our cash, cash equivalents and marketable securities totaled
$1.74 billion
, which represents a decrease of
$1.14 billion
from
June 30, 2018
. The decrease is mainly due to $1.82 billion paid to fund Orbotech and other business acquisitions, payment of dividends and dividend equivalents of
$472.3 million
, and stock repurchases of
$1.10 billion
, partially offset by the net proceeds from our 2019 Senior Notes of
$1.18 billion
, our cash generated from operations of
$1.15 billion
and net proceeds of $764.2 million from marketable securities transactions. As of
June 30, 2019
,
$669.3 million
of our
$1.74 billion
of cash, cash equivalents, and marketable securities were held by our foreign subsidiaries and branch offices. We currently intend to indefinitely reinvest
$379.1 million
of the cash, cash equivalents and marketable securities held by our foreign subsidiaries for which we assert that earnings are permanently reinvested. If, however, a portion of these funds were to be repatriated to the United States, we would be required to accrue and pay state and foreign taxes of approximately 1%-22% of the funds repatriated. The amount of taxes due will depend on the amount and manner of the repatriation, as well as the location from which the funds are repatriated. We have accrued state and foreign tax on the remaining cash of
$290.2 million
of the
$669.3 million
held by our foreign subsidiaries and branch offices. As such, these funds can be returned to the U.S. without accruing any additional U.S. tax expense.
54
Cash Dividends and Special Cash Dividend:
The total amount of regular quarterly cash dividends and dividends equivalents paid during the fiscal years ended
June 30, 2019
,
2018
and
2017
was
$469.4 million
,
$395.6 million
and
$335.4 million
, respectively. The increase in the amount of regular quarterly cash dividends and dividends equivalents paid during the fiscal year ended
June 30, 2019
reflected the increase in the level of our regular quarterly cash dividend from
$0.59
to
$0.75
per share that were instituted during the three months ended June 30, 2018. The amount of accrued dividend equivalents payable for regular quarterly cash dividends on unvested restricted stock units (“RSUs”) with dividend equivalent rights was
$7.3 million
and
$6.7 million
as of
June 30, 2019
and
2018
, respectively. These amounts will be paid upon vesting of the underlying unvested RSUs as described in Note 9, “Equity, Long-term Incentive Compensation Plans and Non-Controlling Interest” to our Consolidated Financial Statements.
On August 1, 2019, we announced that our Board of Directors had declared a quarterly cash dividend of $0.75 per share. Refer to Note 19, “Subsequent Events” to the Consolidated Financial Statements for additional information regarding the declaration of our quarterly cash dividend announced subsequent to June 30, 2019.
On November 19, 2014, our Board of Directors declared a special cash dividend of $16.50 per share on our outstanding common stock. The declaration and payment of the special cash dividend was part of our leveraged recapitalization transaction under which the special cash dividend was financed through a combination of existing cash and proceeds from the debt financing disclosed in Note 8, “Debt” that was completed during the
three
months ended
December 31, 2014
. The total amount of the special cash dividend accrued by us at the declaration date was substantially paid out during the
three
months ended
December 31, 2014
, except for the aggregate special cash dividend of $43.0 million that was accrued for the unvested RSUs and to be paid when such underlying unvested RSUs vest. During the second quarter of fiscal 2019, all of the special cash dividends accrued with respect to outstanding RSUs were vested and paid in full. We paid a special cash dividend with respect to vested restricted stock units during the fiscal years ended
June 30, 2019
,
2018
and
2017
of
$2.9 million
,
$6.4 million
and
$8.6 million
, respectively. Other than the special cash dividend declared during the
three
months ended
December 31, 2014
, we historically have not declared any special cash dividend. For details of the special cash dividend, refer to Note 9 “Equity, Long-Term Incentive Compensation Plans and Non-Controlling Interest,” to our Consolidated Financial Statements
Stock Repurchases:
The shares repurchased under our stock repurchase program have reduced our basic and diluted weighted-average shares outstanding for the fiscal years ended
June 30, 2019
and
2018
. The stock repurchase program is intended, in part, to offset shares issued in connection with the purchases under our Employee Stock Purchase Plan (“ESPP”) program and the vesting of employee restricted stock units.
Fiscal Year
2019
Compared to Fiscal Year
2018
Cash Flows from Operating Activities:
We have historically financed our liquidity requirements through cash generated from operations. Net cash provided by operating activities during the fiscal year ended
June 30, 2019
decreased by $76.5 million compared to the fiscal year ended
June 30, 2018
, from
$1.23 billion
to
$1.15 billion
primarily as a result of the following factors:
|
•
|
An increase in accounts payable payments of approximately $58.0 million;
|
|
•
|
An increase in payments for employee-related expenses of approximately $51.0 million;
|
|
•
|
An increase in payments for merger and acquisition related expenses, net of cash outflow mostly related to the Orbotech acquisition of approximately $51.0 million;
|
These trends were partially offset by a decrease in income tax payments of $72.7 million, and an increase in collections of approximately $10.0 million.
Cash Flows from Investing Activities:
Net cash used in investing activities during the fiscal year ended
June 30, 2019
was
$1.18 billion
compared to net cash provided by investing activities of
$291.6 million
during the fiscal year ended
June 30, 2018
. This increase was mainly due to $1.82 billion paid to fund Orbotech and other acquisitions, an increase in capital expenditures of $63.6 million, partially offset by higher net sales and maturities of marketable securities of $388.8 million.
55
Cash Flows from Financing Activities:
Net cash used in financing activities during the fiscal year ended
June 30, 2019
decreased compared to the fiscal year ended
June 30, 2018
, from
$1.27 billion
to
$360.0 million
. This change was mainly impacted by net proceeds from the issuance of Senior Notes in March 2019 of
$1.18 billion
, partially offset by an increase in common stock repurchases of $892.0 million and an increase in dividend and dividend equivalent payments of $70.2 million due to an increase in our quarterly dividend from $0.59 to $0.75 per share.
Senior Notes:
In March 2019 and November 2014, we issued
$1.20 billion
and
$2.50 billion
, respectively (each a “2019 Senior Notes”, a “2014 Senior Notes”, and collectively the “Senior Notes”), aggregate principal amount of senior, unsecured long-term notes.
The interest rate specified for each series of the 2014 Senior Notes will be subject to adjustments from time to time if Moody’s Investor Service, Inc. (“Moody’s”) or Standard & Poor’s Ratings Services (“S&P”) or, under certain circumstances, a substitute rating agency selected by us as a replacement for Moody’s or S&P, as the case may be (a “Substitute Rating Agency”), downgrades (or subsequently upgrades) its rating assigned to the respective series of the 2014 Senior Notes such that the adjusted rating is below investment grade. Unlike the 2014 Senior Notes, the interest rate for each series of the 2019 Senior Notes will not be subject to such adjustments. During the three months ended June 30, 2018, we entered into a series of forward contracts (the “2018 Rate Lock Agreements”) to lock the benchmark interest rate with notional amount of $500.0 million in aggregate. In October 2014, we entered into a series of forward contracts to lock the 10-year treasury rate (“benchmark rate”) on a portion of the 2014 Senior Notes with a notional amount of
$1.00 billion
in aggregate. For additional details, refer to Note 17, “Derivative Instruments and Hedging Activities” and Note 8 “Debt” to our Consolidated Financial Statements.
The original discounts on the 2019 Senior Notes and the 2014 Senior Notes amounted to
$6.7 million
and
$4.0 million
, respectively, and are being amortized over the life of the debt. Interest is payable
semi-annually
on May 1 and November 1 of each year for the 2014 Senior Notes and semi-annually on March 15 and September 15 of each year for the 2019 Senior Notes. The indenture for the Senior Notes (the “Indenture”) includes covenants that limit our ability to grant liens on our facilities and enter into sale and leaseback transactions, subject to certain allowances under which certain sale and leaseback transactions are not restricted.
In certain circumstances involving a change of control followed by a downgrade of the rating of a series of Senior Notes by at least two of Moody’s, S&P and Fitch Inc., unless we have exercised our rights to redeem the Senior Notes of such series, we will be required to make an offer to repurchase all or, at the holder’s option, any part, of each holder’s Senior Notes of that series pursuant to the offer described below (the “Change of Control Offer”). In the Change of Control Offer, we will be required to offer payment in cash equal to 101% of the aggregate principal amount of Senior Notes repurchased plus accrued and unpaid interest, if any, on the Senior Notes repurchased, up to, but not including, the date of repurchase.
As of
June 30, 2019
, we were in compliance with all of our covenants under the Indenture associated with the Senior Notes.
Revolving Credit Facility:
In November 2017, we entered into a Credit Agreement (the “Credit Agreement”) providing for a
$750.0 million
five-year unsecured Revolving Credit Facility (the “Revolving Credit Facility”), which replaced our prior Credit Facility. Subject to the terms of the Credit Agreement, the Revolving Credit Facility may be increased in an amount up to
$250.0 million
in the aggregate. In November 2018, we entered into an Incremental Facility, Extension and Amendment Agreement (the “Amendment”), which amends the Credit Agreement to (a) extend the Maturity Date (the “Maturity Date”) from November 30, 2022 to November 30, 2023, (b) increase the total commitment by $250.0 million and (c) effect certain other amendments to the Credit Agreement as set forth in the Amendment. After giving effect to the Amendment, the total commitments under the Credit Agreement are $1.00 billion. During the third quarter of the fiscal year ended
June 30, 2019
, we made borrowings of
$900.0 million
from the Revolving Credit Facility as part of the funding for the Orbotech Acquisition, which were paid in full in the same quarter. As of
June 30, 2019
, we had no outstanding borrowings under the Revolving Credit Facility.
We may borrow, repay and reborrow funds under the Revolving Credit Facility until the Maturity Date, at which time such Revolving Credit Facility will terminate, and all outstanding loans under such facility, together with all accrued and unpaid interest, must be repaid. We may prepay outstanding borrowings under the Revolving Credit Facility at any time without a prepayment penalty.
56
Borrowings under the Revolving Credit Facility will bear interest, at our option, at either: (i) the Alternative Base Rate (“ABR”) plus a spread, which ranges from
0 bps
to
75 bps
, or (ii) the London Interbank Offered Rate (“LIBOR”) plus a spread, which ranges from
100 bps
to
175 bps
. The spreads under ABR and LIBOR are subject to adjustment in conjunction with credit rating downgrades or upgrades. We are also obligated to pay an annual commitment fee on the daily undrawn balance of the Revolving Credit Facility, which ranges from
10 bps
to
25 bps
, subject to an adjustment in conjunction with changes to our credit rating. As of
June 30, 2019
, we pay an annual commitment fee of
12.5 bps
on the daily undrawn balance of the Revolving Credit Facility.
The Revolving Credit Facility requires us to maintain an interest expense coverage ratio as described in the Credit Agreement, on a quarterly basis, covering the trailing
four
consecutive fiscal quarters of no less than
3.50
to
1.00
. In addition, we are required to maintain the maximum leverage ratio as described in the Credit Agreement, on a quarterly basis of
3.00
to
1.00
, covering the trailing
four
consecutive fiscal quarters for each fiscal quarter, which can be increased to
4.00
to
1.00
for a period of time in connection with a material acquisition or a series of material acquisitions. As of
June 30, 2019
, we elected to increase the maximum allowed leverage ratio to 4.00 to 1.00 following the Orbotech Acquisition.
We were in compliance with all covenants under the Credit Agreement as of
June 30, 2019
(the interest expense coverage ratio was 14.27 to 1.00 and the leverage ratio was 1.80 to 1.00). Considering our current liquidity position, short-term financial forecasts and ability to prepay the Revolving Credit Facility, if necessary, we expect to continue to be in compliance with our financial covenants at the end of our fiscal year ending
June 30, 2020
.
Contractual Obligations
The following is a schedule summarizing our significant obligations to make future payments under contractual obligations as of
June 30, 2019
:
|
|
Fiscal year ending June 30,
|
||||||||||||||||||||||||||||||
|
(In thousands)
|
Total
|
2020
|
2021
|
2022
|
2023
|
2024
|
2025 and thereafter
|
Others
|
|||||||||||||||||||||||
|
Debt obligations
(1)
|
$
|
3,450,000
|
|
$
|
250,000
|
|
$
|
—
|
|
$
|
500,000
|
|
$
|
—
|
|
$
|
—
|
|
$
|
2,700,000
|
|
$
|
—
|
|
|||||||
|
Interest payment associated with all
debt obligations (2) |
1,653,037
|
|
152,925
|
|
146,942
|
|
136,630
|
|
126,317
|
|
125,581
|
|
964,642
|
|
—
|
|
|||||||||||||||
|
Purchase commitments
(3)
|
631,128
|
|
621,401
|
|
7,405
|
|
1,405
|
|
423
|
|
226
|
|
268
|
|
—
|
|
|||||||||||||||
|
Income taxes
payable (4) |
139,603
|
|
—
|
|
—
|
|
—
|
|
—
|
|
—
|
|
—
|
|
139,603
|
|
|||||||||||||||
|
Operating leases
|
103,571
|
|
30,296
|
|
22,250
|
|
16,217
|
|
11,878
|
|
7,912
|
|
15,018
|
|
—
|
|
|||||||||||||||
|
Cash long-term incentive program
(5)
|
179,346
|
|
67,831
|
|
58,307
|
|
34,884
|
|
18,324
|
|
—
|
|
—
|
|
—
|
|
|||||||||||||||
|
Pension obligations
(6)
|
38,415
|
|
2,327
|
|
2,144
|
|
2,806
|
|
2,950
|
|
5,257
|
|
22,931
|
|
—
|
|
|||||||||||||||
|
Executive Deferred
Savings Plan (7) |
208,926
|
|
—
|
|
—
|
|
—
|
|
—
|
|
—
|
|
—
|
|
208,926
|
|
|||||||||||||||
|
Transition tax payable
(8)
|
283,143
|
|
8,643
|
|
26,143
|
|
26,143
|
|
26,143
|
|
49,018
|
|
147,053
|
|
—
|
|
|||||||||||||||
|
Liability for employee rights upon retirement
(9)
|
52,108
|
|
—
|
|
—
|
|
—
|
|
—
|
|
—
|
|
—
|
|
52,108
|
|
|||||||||||||||
|
Other
(10)
|
7,340
|
|
3,991
|
|
1,696
|
|
1,159
|
|
418
|
|
76
|
|
—
|
|
—
|
|
|||||||||||||||
|
Total obligations
|
$
|
6,746,617
|
|
$
|
1,137,414
|
|
$
|
264,887
|
|
$
|
719,244
|
|
$
|
186,453
|
|
$
|
188,070
|
|
$
|
3,849,912
|
|
$
|
400,637
|
|
|||||||
__________________
|
(1)
|
Represents
$3.45 billion
aggregate principal amount of Senior Notes due from fiscal year 2020 to fiscal year 2049.
|
|
(2)
|
The interest payments associated with the Senior Notes payable included in the table above are based on the principal amount multiplied by the applicable interest rate for each series of Senior Notes. Our future interest payments are subject to change if our then effective credit rating is below investment grade as discussed above. The interest payment under the Revolving Credit Facility for the undrawn balance is payable at 12.5 bps as a commitment fee based on the daily undrawn balance and we utilized the existing rate for the projected interest payments included in the table above. Our future interest payments for the Revolving Credit Facility is subject to change due to any upgrades or downgrades to our then effective credit rating.
|
57
|
(3)
|
Represents an estimate of significant commitments to purchase inventory from our suppliers as well as an estimate of significant purchase commitments associated with goods, services and other assets in the ordinary course of business. Our obligation under these purchase commitments is generally restricted to a forecasted time-horizon as mutually agreed upon between the parties. This forecasted time-horizon can vary among different suppliers. Actual expenditures will vary based upon the volume of the transactions and length of contractual service provided. In addition, the amounts paid under these arrangements may be less in the event the arrangements are renegotiated or canceled. Certain agreements provide for potential cancellation penalties.
|
|
(4)
|
Represents the estimated income tax payable obligation related to uncertain tax positions as well as related accrued interest. We are unable to make a reasonably reliable estimate of the timing of payments in individual years due to uncertainties in the timing of tax audit outcomes.
|
|
(5)
|
Represents the amount committed under our cash long-term incentive program. The expected payment after estimated forfeitures is approximately
$145.8 million
.
|
|
(6)
|
Represents an estimate of expected benefit payments up to fiscal year 2029 that was actuarially determined and excludes the minimum cash required to contribute to the plan. As of
June 30, 2019
, our defined benefit pension plans do not have material required minimum cash contribution obligations.
|
|
(7)
|
Represents the amount committed under our non-qualified executive deferred compensation plan. We are unable to make a reasonably reliable estimate of the timing of payments in individual years due to the uncertainties in the timing around participant’s separation and any potential changes that participants may decide to make to the previous distribution elections.
|
|
(8)
|
Represents the transition tax liability associated with our deemed repatriation of accumulated foreign earnings as a result from the enactment of the Tax Cuts and Jobs-Act into law on December 22, 2017.
|
|
(9)
|
Represents severance payments due upon dismissal of an employee or upon termination of employment in certain other circumstances as required under Israeli law.
|
|
(10)
|
Represents amounts committed for accrued dividends payable for quarterly cash dividends for unvested restricted stock units granted with dividend equivalent rights. For additional details, refer to Note 9, “Equity, Long-term Incentive Compensation Plans and Non-Controlling Interest,” to our Consolidated Financial Statements.
|
We have adopted a cash-based long-term incentive (“Cash LTI”) program for many of our employees as part of our employee compensation program. Cash LTI awards issued to employees under the Cash Long-Term Incentive Plan (“Cash LTI Plan”) generally vest in three or four equal installments. For additional details, refer to Note 9, “Equity, Long-term Incentive Compensation Plans and Non-Controlling Interest,” to our Consolidated Financial Statements.
We have agreements with financial institutions to sell certain of our trade receivables and promissory notes from customers without recourse. In addition, we periodically sell certain letters of credit (“LCs”), without recourse, received from customers in payment for goods and services.
The following table shows total receivables sold under factoring agreements and proceeds from sales of LCs for the indicated periods:
|
Year ended June 30,
|
|||||||||||
|
(In thousands)
|
2019
|
2018
|
2017
|
||||||||
|
Receivables sold under factoring agreements
|
$
|
193,089
|
|
$
|
217,462
|
|
$
|
152,509
|
|
||
|
Proceeds from sales of LCs
|
$
|
95,436
|
|
$
|
5,511
|
|
$
|
48,780
|
|
||
Factoring and LC fees for the sale of certain trade receivables were recorded in other expense (income), net and were not material for the periods presented.
We maintain guarantee arrangements available through various financial institutions for up to
$50.8 million
, of which
$44.7 million
had been issued as of
June 30, 2019
, primarily to fund guarantees to customs authorities for value-added tax (“VAT”) and other operating requirements of our subsidiaries in Europe, Israel, and Asia.
58
Working Capital:
Working capital was
$2.55 billion
as of
June 30, 2019
, which represents a decrease of
$788.1 million
compared to our working capital as of
June 30, 2018
. As of
June 30, 2019
, our principal sources of liquidity consisted of
$1.74 billion
of cash, cash equivalents and marketable securities. Our liquidity may be affected by many factors, some of which are based on the normal ongoing operations of the business, spending for business acquisitions, and other factors such as uncertainty in the global and regional economies and the semiconductor, semiconductor-related and electronic device industries. Although cash requirements will fluctuate based on the timing and extent of these factors, we believe that cash generated from operations, together with the liquidity provided by existing cash and cash equivalents balances and our $1.00 billion Revolving Credit Facility, will be sufficient to satisfy our liquidity requirements associated with working capital needs, capital expenditures, cash dividends, stock repurchases and other contractual obligations, including repayment of outstanding debt, for at least the next 12 months.
Our credit ratings as of
June 30, 2019
are summarized below:
|
Rating Agency
|
Rating
|
|
Fitch
|
BBB+
|
|
Moody’s
|
Baa1
|
|
Standard & Poor’s
|
BBB
|
Factors that can affect our credit ratings include changes in our operating performance, the economic environment, conditions in the semiconductor and semiconductor equipment industries, our financial position, material acquisitions and changes in our business strategy.
Off-Balance Sheet Arrangements
As of
June 30, 2019
, we did not have any off-balance sheet arrangements, as defined in Item 303(a)(4)(ii) of SEC Regulation S-K, that have or are reasonably likely to have a current or future effect on our financial position, changes in financial condition, revenues and expenses, results of operations, liquidity, capital expenditures, or capital resources that are material to investors. Refer to Note 14 “Commitments and Contingencies” to our Consolidated Financial Statements for information related to indemnification obligations.
59
|
ITEM 7A.
|
QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
|
We are exposed to financial market risks, including changes in interest rates, foreign currency exchange rates and marketable equity security prices. To mitigate these risks, we utilize derivative financial instruments, such as foreign currency hedges. All of the potential changes noted below are based on sensitivity analysis performed on our financial position as of
June 30, 2019
. Actual results may differ materially.
As of
June 30, 2019
, we had an investment portfolio of fixed income securities of $813.5 million These securities, as with all fixed income instruments, are subject to interest rate risk and will decline in value if market interest rates increase. If market interest rates were to increase immediately and uniformly by 100 bps from levels as of
June 30, 2019
, the fair value of the portfolio would have declined by $4.3 million.
In March 2019 and November 2014, we issued
$1.20 billion
and
$2.50 billion
, respectively, (each, a “2019 Senior Notes”, a “2014 Senior Notes”, and collectively the “Senior Notes”) aggregate principal amount of fixed rate senior, unsecured long-term notes. The fair market value of long-term fixed interest rate notes is subject to interest rate risk. Generally, the fair market value of fixed interest rate notes will increase as interest rates fall and decrease as interest rates rise. As of
June 30, 2019
, the fair value and the book value of our Senior Notes were
$3.70 billion
and
$3.45 billion
, respectively, due in various fiscal years ranging from 2020 to 2049. Additionally, the interest expense for the 2014 Senior Notes is subject to interest rate adjustments following a downgrade of our credit ratings below investment grade by the credit rating agencies. Following a rating change below investment grade, the stated interest rate for each series of the 2014 Senior Notes may increase between 25 bps to 100 bps based on the adjusted credit rating. Refer to Note 8, “Debt” to our Consolidated Financial Statements in Part II, Item 8 and Management’s Discussion and Analysis of Financial Condition and Results of Operations,
“Liquidity and Capital Resources,”
in Part II, Item 7 for additional details. Factors that can affect our credit ratings include changes in our operating performance, the economic environment, conditions in the semiconductor, semiconductor-related, and electronics industries, our financial position, and changes in our business strategy. As of
June 30, 2019
, if our credit rating was downgraded below investment grade by Moody’s and S&P, the maximum potential increase to our annual interest expense on the 2014 Senior Notes, considering a 200 bps increase to the stated interest rate for each series of our 2014 Senior Notes, is estimated to be approximately $41.7 million. Unlike the 2014 Senior Notes, the interest rate for each series of the 2019 Senior Notes will not be subject to such adjustments.
In November 2017, we entered into a Credit Agreement (the “Credit Agreement”) for a $750.0 million five-year unsecured Revolving Credit Facility (the “Revolving Credit Facility”), which replaced our prior Credit Agreement. Subject to the terms of the Credit Agreement, the Revolving Credit Facility may be increased in an amount up to $250.0 million in the aggregate. In November 2018, we entered into an Incremental Facility, Extension and Amendment Agreement (the “Amendment”), which amends the Credit Agreement to (a) extend the Maturity Date (the “Maturity Date”) from November 30, 2022 to November 30, 2023, (b) increase the total commitment by $250.0 million and (c) effect certain other amendments to the Credit Agreement as set forth in the Amendment. After giving effect to the Amendment, the total commitments under the Credit Agreement are $1.00 billion. As of
June 30, 2019
, we do not have any outstanding floating rate debts that are subject to an increase in interest rates. We are obligated to pay an annual commitment fee of 12.5 bps on the daily undrawn balance of the Revolving Credit Facility which is subject to an adjustment in conjunction with our credit rating downgrades or upgrades. The annual commitment fee ranges from 10 bps to 25 bps on the daily undrawn balance of the Revolving Credit Facility, depending upon the then effective credit rating. As of
June 30, 2019
, if our credit ratings were downgraded to be below investment grade, the maximum potential increase to our annual commitment fee for the Revolving Credit Facility, using the highest range of the ranges discussed above, is estimated to be approximately $0.8 million.
See Note 5, “Marketable Securities” to our Consolidated Financial Statements in Part II, Item 8; Management’s Discussion and Analysis of Financial Condition and Results of Operations, “Liquidity and Capital Resources,” in Part II, Item 7; and Risk Factors in Part I, Item 1A of this Annual Report on Form 10-K for a description of recent market events that may affect the value of the investments in our portfolio that we held as of
June 30, 2019
.
As of
June 30, 2019
, we had net forward and option contracts to sell
$97.6 million
in foreign currency in order to hedge certain currency exposures (see Note 16, “Derivative Instruments and Hedging Activities” to our Consolidated Financial Statements for additional details). If we had entered into these contracts on
June 30, 2019
, the U.S. dollar equivalent would have been $98.3 million. A 10% adverse move in all currency exchange rates affecting the contracts would decrease the fair value of the contracts by $48.3 million. However, if this occurred, the fair value of the underlying exposures hedged by the contracts would increase by a similar amount. Accordingly, we believe that, as a result of the hedging of certain of our foreign currency exposure, changes in most relevant foreign currency exchange rates should have no material impact on our results of operations or cash flows.
60
|
ITEM 8.
|
FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
|
61
KLA CORPORATION
(formerly known as KLA-TENCOR CORPORATION)
Consolidated Balance Sheets
|
|
As of June 30,
|
||||||
|
(In thousands, except par value)
|
2019
|
2018
|
|||||
|
ASSETS
|
|||||||
|
Current assets:
|
|||||||
|
Cash and cash equivalents
|
$
|
1,015,994
|
|
$
|
1,404,382
|
|
|
|
Marketable securities
|
723,391
|
|
1,475,936
|
|
|||
|
Accounts receivable, net
|
990,113
|
|
651,678
|
|
|||
|
Inventories
|
1,262,500
|
|
931,845
|
|
|||
|
Other current assets
|
323,077
|
|
85,159
|
|
|||
|
Total current assets
|
4,315,075
|
|
4,549,000
|
|
|||
|
Land, property and equipment, net
|
448,799
|
|
286,306
|
|
|||
|
Goodwill
|
2,211,858
|
|
354,698
|
|
|||
|
Deferred income taxes
|
206,141
|
|
193,200
|
|
|||
|
Purchased intangible assets, net
|
1,560,670
|
|
19,333
|
|
|||
|
Other non-current assets
|
265,973
|
|
236,082
|
|
|||
|
Total assets
|
$
|
9,008,516
|
|
$
|
5,638,619
|
|
|
|
LIABILITIES, NON-CONTROLLING INTEREST AND STOCKHOLDERS’ EQUITY
|
|||||||
|
Current liabilities:
|
|||||||
|
Accounts payable
|
$
|
202,416
|
|
$
|
169,354
|
|
|
|
Deferred system revenue
|
282,348
|
|
—
|
|
|||
|
Deferred service revenue
|
206,669
|
|
69,255
|
|
|||
|
Deferred system profit
|
—
|
|
279,581
|
|
|||
|
Current portion of long-term debt
|
249,999
|
|
—
|
|
|||
|
Other current liabilities
|
827,054
|
|
696,080
|
|
|||
|
Total current liabilities
|
1,768,486
|
|
1,214,270
|
|
|||
|
Non-current liabilities:
|
|||||||
|
Long-term debt
|
3,173,383
|
|
2,237,402
|
|
|||
|
Deferred tax liabilities
|
702,285
|
|
1,197
|
|
|||
|
Deferred service revenue
|
98,772
|
|
71,997
|
|
|||
|
Other non-current liabilities
|
587,897
|
|
493,242
|
|
|||
|
Total liabilities
|
6,330,823
|
|
4,018,108
|
|
|||
|
Commitments and contingencies (Notes 14 and 15)
|
|
|
|||||
|
Stockholders’ equity:
|
|||||||
|
Preferred stock, $0.001 par value, 1,000 shares authorized, none outstanding
|
—
|
|
—
|
|
|||
|
Common stock, $0.001 par value, 500,000 shares authorized, 276,202 and 262,718 shares issued, 159,475 and 156,048 shares outstanding, as of June 30, 2019 and June 30, 2018, respectively
|
159
|
|
156
|
|
|||
|
Capital in excess of par value
|
2,017,153
|
|
617,843
|
|
|||
|
Retained earnings
|
714,825
|
|
1,056,445
|
|
|||
|
Accumulated other comprehensive income (loss)
|
(73,029
|
)
|
(53,933
|
)
|
|||
|
Total KLA stockholders’ equity
|
2,659,108
|
|
1,620,511
|
|
|||
|
Non-controlling interest in consolidated subsidiaries
|
18,585
|
|
—
|
|
|||
|
Total stockholders’ equity
|
2,677,693
|
|
1,620,511
|
|
|||
|
Total liabilities and stockholders’ equity
|
$
|
9,008,516
|
|
$
|
5,638,619
|
|
|
See accompanying notes to Consolidated Financial Statements.
62
KLA CORPORATION
(formerly known as KLA-TENCOR CORPORATION)
Consolidated Statements of Operations
|
|
Year ended June 30,
|
||||||||||
|
(In thousands, except per share amounts)
|
2019
|
2018
|
2017
|
||||||||
|
Revenues:
|
|||||||||||
|
Product
|
$
|
3,392,243
|
|
$
|
3,160,671
|
|
$
|
2,703,934
|
|
||
|
Service
|
1,176,661
|
|
876,030
|
|
776,080
|
|
|||||
|
Total revenues
|
4,568,904
|
|
4,036,701
|
|
3,480,014
|
|
|||||
|
Costs and expenses:
|
|||||||||||
|
Costs of revenues
|
1,869,377
|
|
1,446,041
|
|
1,286,215
|
|
|||||
|
Research and development
|
711,030
|
|
608,531
|
|
526,688
|
|
|||||
|
Selling, general and administrative
|
599,124
|
|
442,304
|
|
388,211
|
|
|||||
|
Interest expense
|
124,604
|
|
114,376
|
|
122,476
|
|
|||||
|
Other expense (income), net
|
(31,462
|
)
|
(30,482
|
)
|
(16,822
|
)
|
|||||
|
Income before income taxes
|
1,296,231
|
|
1,455,931
|
|
1,173,246
|
|
|||||
|
Provision for income taxes
|
121,214
|
|
653,666
|
|
247,170
|
|
|||||
|
Net income
|
1,175,017
|
|
802,265
|
|
926,076
|
|
|||||
|
Less: Net loss attributable to non-controlling interest
|
(600
|
)
|
—
|
|
—
|
|
|||||
|
Net income attributable to KLA
|
$
|
1,175,617
|
|
$
|
802,265
|
|
$
|
926,076
|
|
||
|
Net income per share attributable to KLA
|
|||||||||||
|
Basic
|
$
|
7.53
|
|
$
|
5.13
|
|
$
|
5.92
|
|
||
|
Diluted
|
$
|
7.49
|
|
$
|
5.10
|
|
$
|
5.88
|
|
||
|
Weighted-average number of shares:
|
|||||||||||
|
Basic
|
156,053
|
|
156,346
|
|
156,468
|
|
|||||
|
Diluted
|
156,949
|
|
157,378
|
|
157,481
|
|
|||||
See accompanying notes to Consolidated Financial Statements.
63
KLA CORPORATION
(formerly known as KLA-TENCOR CORPORATION)
Consolidated Statements of Comprehensive Income
|
Year ended June 30,
|
|||||||||||
|
(In thousands)
|
2019
|
2018
|
2017
|
||||||||
|
Net income
|
$
|
1,175,017
|
|
$
|
802,265
|
|
$
|
926,076
|
|
||
|
Other comprehensive income (loss):
|
|||||||||||
|
Currency translation adjustments:
|
|||||||||||
|
Change in currency translation adjustments
|
(5,190
|
)
|
1,358
|
|
2,332
|
|
|||||
|
Change in income tax benefit or expense
|
117
|
|
(678
|
)
|
(562
|
)
|
|||||
|
Net change related to currency translation adjustments
|
(5,073
|
)
|
680
|
|
1,770
|
|
|||||
|
Cash flow hedges:
|
|||||||||||
|
Change in net unrealized gains or losses
|
(9,119
|
)
|
(1,934
|
)
|
10,138
|
|
|||||
|
Reclassification adjustments for net gains or losses included in net income
|
(4,018
|
)
|
(3,846
|
)
|
(3,222
|
)
|
|||||
|
Change in income tax benefit or expense
|
2,033
|
|
2,491
|
|
(2,470
|
)
|
|||||
|
Net change related to cash flow hedges
|
(11,104
|
)
|
(3,289
|
)
|
4,446
|
|
|||||
|
Net change related to unrecognized losses and transition obligations in connection with defined benefit plans
|
(1,824
|
)
|
7,162
|
|
(1,534
|
)
|
|||||
|
Available-for-sale securities:
|
|||||||||||
|
Change in net unrealized gains or losses
|
11,664
|
|
(9,697
|
)
|
(8,568
|
)
|
|||||
|
Reclassification adjustments for net gains or losses included in net income
|
1,294
|
|
209
|
|
(191
|
)
|
|||||
|
Change in income tax benefit or expense
|
(3,208
|
)
|
2,325
|
|
1,439
|
|
|||||
|
Net change related to available-for-sale securities
|
9,750
|
|
(7,163
|
)
|
(7,320
|
)
|
|||||
|
Other comprehensive loss
|
(8,251
|
)
|
(2,610
|
)
|
(2,638
|
)
|
|||||
|
Comprehensive loss attributable to non-controlling interest
|
(600
|
)
|
—
|
|
—
|
|
|||||
|
Total comprehensive income attributable to KLA
|
$
|
1,167,366
|
|
$
|
799,655
|
|
$
|
923,438
|
|
||
See accompanying notes to Consolidated Financial Statements.
64
KLA CORPORATION
(formerly known as KLA-TENCOR CORPORATION)
Consolidated Statements of Stockholders’ Equity
|
|
Common Stock and
Capital in Excess of
Par Value
|
Retained
Earnings
|
Accumulated
Other
Comprehensive
Income (Loss)
|
Total
KLA Stockholders’
Equity
|
Non-Controlling Interest
|
Total Stockholders’
Equity
|
||||||||||||||||||||
|
(In thousands, except per share amounts)
|
Shares
|
Amount
|
||||||||||||||||||||||||
|
Balances as of June 30, 2016
|
155,995
|
|
$
|
452,974
|
|
$
|
284,825
|
|
$
|
(48,685
|
)
|
$
|
689,114
|
|
$
|
—
|
|
$
|
689,114
|
|
||||||
|
Net income
|
—
|
|
—
|
|
926,076
|
|
—
|
|
926,076
|
|
—
|
|
926,076
|
|
||||||||||||
|
Other comprehensive loss
|
—
|
|
—
|
|
—
|
|
(2,638
|
)
|
(2,638
|
)
|
—
|
|
(2,638
|
)
|
||||||||||||
|
Net issuance under employee stock plans
|
1,088
|
|
26,132
|
|
—
|
|
—
|
|
26,132
|
|
—
|
|
26,132
|
|
||||||||||||
|
Repurchase of common stock
|
(243
|
)
|
(766
|
)
|
(24,236
|
)
|
—
|
|
(25,002
|
)
|
—
|
|
(25,002
|
)
|
||||||||||||
|
Cash dividends ($2.14 per share) and dividend equivalents declared
|
—
|
|
—
|
|
(338,208
|
)
|
—
|
|
(338,208
|
)
|
—
|
|
(338,208
|
)
|
||||||||||||
|
Stock-based compensation expense
|
—
|
|
50,943
|
|
—
|
|
—
|
|
50,943
|
|
—
|
|
50,943
|
|
||||||||||||
|
Balances as of June 30, 2017
|
156,840
|
|
529,283
|
|
848,457
|
|
(51,323
|
)
|
1,326,417
|
|
—
|
|
1,326,417
|
|
||||||||||||
|
Net income
|
—
|
|
—
|
|
802,265
|
|
—
|
|
802,265
|
|
—
|
|
802,265
|
|
||||||||||||
|
Other comprehensive loss
|
—
|
|
—
|
|
—
|
|
(2,610
|
)
|
(2,610
|
)
|
—
|
|
(2,610
|
)
|
||||||||||||
|
Net issuance under employee stock plans
|
1,168
|
|
32,687
|
|
—
|
|
—
|
|
32,687
|
|
—
|
|
32,687
|
|
||||||||||||
|
Repurchase of common stock
|
(1,960
|
)
|
(6,755
|
)
|
(196,414
|
)
|
—
|
|
(203,169
|
)
|
—
|
|
(203,169
|
)
|
||||||||||||
|
Cash dividends ($2.52 per share) and dividend equivalents declared
|
—
|
|
—
|
|
(397,863
|
)
|
—
|
|
(397,863
|
)
|
—
|
|
(397,863
|
)
|
||||||||||||
|
Stock-based compensation expense
|
—
|
|
62,784
|
|
—
|
|
—
|
|
62,784
|
|
—
|
|
62,784
|
|
||||||||||||
|
Balances as of June 30, 2018
|
156,048
|
|
617,999
|
|
1,056,445
|
|
(53,933
|
)
|
1,620,511
|
|
—
|
|
1,620,511
|
|
||||||||||||
|
Adoption of ASC 606
|
—
|
|
—
|
|
(21,215
|
)
|
75
|
|
(21,140
|
)
|
—
|
|
(21,140
|
)
|
||||||||||||
|
Reclassification of stranded tax effects
|
—
|
|
—
|
|
10,920
|
|
(10,920
|
)
|
—
|
|
—
|
|
—
|
|
||||||||||||
|
Balance as of July 1, 2018
|
156,048
|
|
617,999
|
|
1,046,150
|
|
(64,778
|
)
|
1,599,371
|
|
—
|
|
1,599,371
|
|
||||||||||||
|
Net income attributable to KLA
|
—
|
|
—
|
|
1,175,617
|
|
—
|
|
1,175,617
|
|
—
|
|
1,175,617
|
|
||||||||||||
|
Net loss attributable to non-controlling interest
|
—
|
|
—
|
|
—
|
|
—
|
|
—
|
|
(600
|
)
|
(600
|
)
|
||||||||||||
|
Other comprehensive loss
|
—
|
|
—
|
|
—
|
|
(8,251
|
)
|
(8,251
|
)
|
—
|
|
(8,251
|
)
|
||||||||||||
|
Assumption of stock-based compensation plan awards in connection with the acquisition of Orbotech
|
—
|
|
13,281
|
|
—
|
|
—
|
|
13,281
|
|
—
|
|
13,281
|
|
||||||||||||
|
Common stock issued upon the acquisition of Orbotech
|
12,292
|
|
1,330,786
|
|
—
|
|
—
|
|
1,330,786
|
|
—
|
|
1,330,786
|
|
||||||||||||
|
Net issuance under employee stock plans
|
1,342
|
|
27,321
|
|
—
|
|
—
|
|
27,321
|
|
—
|
|
27,321
|
|
||||||||||||
|
Repurchase of common stock
|
(10,207
|
)
|
(66,269
|
)
|
(1,036,933
|
)
|
—
|
|
(1,103,202
|
)
|
—
|
|
(1,103,202
|
)
|
||||||||||||
|
Cash dividends ($3.00 per share) and dividend equivalents declared
|
—
|
|
—
|
|
(470,009
|
)
|
—
|
|
(470,009
|
)
|
—
|
|
(470,009
|
)
|
||||||||||||
|
Non-controlling interest in connection with the acquisition of Orbotech
|
—
|
|
—
|
|
—
|
|
—
|
|
—
|
|
19,185
|
|
19,185
|
|
||||||||||||
|
Stock-based compensation expense
|
—
|
|
94,194
|
|
—
|
|
—
|
|
94,194
|
|
—
|
|
94,194
|
|
||||||||||||
|
Balances as of June 30, 2019
|
159,475
|
|
$
|
2,017,312
|
|
$
|
714,825
|
|
$
|
(73,029
|
)
|
$
|
2,659,108
|
|
$
|
18,585
|
|
$
|
2,677,693
|
|
||||||
See accompanying notes to Consolidated Financial Statements.
65
KLA CORPORATION
(formerly known as KLA-TENCOR CORPORATION)
Consolidated Statements of Cash Flows
|
|
Year Ended June 30,
|
||||||||||
|
(In thousands)
|
2019
|
2018
|
2017
|
||||||||
|
Cash flows from operating activities:
|
|||||||||||
|
Net income
|
$
|
1,175,017
|
|
$
|
802,265
|
|
$
|
926,076
|
|
||
|
Adjustments to reconcile net income to net cash provided by operating activities:
|
|||||||||||
|
Depreciation and amortization
|
233,224
|
|
62,684
|
|
57,836
|
|
|||||
|
Loss (gains) on unrealized foreign exchange and other
|
4,051
|
|
9,886
|
|
(4,173
|
)
|
|||||
|
Stock-based compensation expense
|
94,194
|
|
62,784
|
|
50,943
|
|
|||||
|
Deferred income taxes
|
(27,511
|
)
|
98,760
|
|
4,007
|
|
|||||
|
Changes in assets and liabilities, net of assets acquired and liabilities assumed in business acquisitions:
|
|||||||||||
|
Accounts receivable
|
(146,151
|
)
|
(76,033
|
)
|
39,750
|
|
|||||
|
Inventories
|
(59,561
|
)
|
(179,605
|
)
|
(46,549
|
)
|
|||||
|
Other assets
|
(47,123
|
)
|
(41,748
|
)
|
(25,961
|
)
|
|||||
|
Accounts payable
|
(21,627
|
)
|
21,778
|
|
39,968
|
|
|||||
|
Deferred system revenue
|
(15,674
|
)
|
—
|
|
—
|
|
|||||
|
Deferred service revenue
|
15,064
|
|
—
|
|
—
|
|
|||||
|
Deferred system profit
|
—
|
|
99,457
|
|
6,310
|
|
|||||
|
Other liabilities
|
(51,271
|
)
|
368,892
|
|
31,458
|
|
|||||
|
Net cash provided by operating activities
|
1,152,632
|
|
1,229,120
|
|
1,079,665
|
|
|||||
|
Cash flows from investing activities:
|
|||||||||||
|
Acquisition of non-marketable securities
|
(630
|
)
|
(3,377
|
)
|
(3,430
|
)
|
|||||
|
Business acquisitions, net of cash acquired
|
(1,818,283
|
)
|
(17,403
|
)
|
(28,560
|
)
|
|||||
|
Capital expenditures
|
(130,498
|
)
|
(66,947
|
)
|
(38,594
|
)
|
|||||
|
Proceeds from sale of assets
|
—
|
|
—
|
|
2,947
|
|
|||||
|
Purchases of available-for-sale securities
|
(81,533
|
)
|
(466,330
|
)
|
(1,626,983
|
)
|
|||||
|
Proceeds from sale of available-for-sale securities
|
256,395
|
|
233,259
|
|
434,873
|
|
|||||
|
Proceeds from maturity of available-for-sale securities
|
589,324
|
|
608,446
|
|
699,293
|
|
|||||
|
Purchases of trading securities
|
(81,022
|
)
|
(77,922
|
)
|
(97,525
|
)
|
|||||
|
Proceeds from sale of trading securities
|
85,265
|
|
81,892
|
|
97,093
|
|
|||||
|
Net cash (used in) provided by investing activities
|
(1,180,982
|
)
|
291,618
|
|
(560,886
|
)
|
|||||
|
Cash flows from financing activities:
|
|||||||||||
|
Proceeds from issuance of debt, net of issuance costs
|
1,183,785
|
|
—
|
|
—
|
|
|||||
|
Proceeds from revolving credit facility, net of debt issuance costs
|
900,000
|
|
248,693
|
|
—
|
|
|||||
|
Repayment of debt
|
(902,474
|
)
|
(946,250
|
)
|
(130,000
|
)
|
|||||
|
Common stock repurchases
|
(1,095,202
|
)
|
(203,169
|
)
|
(25,002
|
)
|
|||||
|
Payment of dividends to stockholders
|
(472,263
|
)
|
(402,065
|
)
|
(343,993
|
)
|
|||||
|
Issuance of common stock
|
64,828
|
|
61,444
|
|
45,359
|
|
|||||
|
Tax withholding payments related to vested and released restricted stock units
|
(37,517
|
)
|
(28,756
|
)
|
(19,169
|
)
|
|||||
|
Payment of contingent consideration payable
|
(1,162
|
)
|
—
|
|
—
|
|
|||||
|
Net cash used in financing activities
|
(360,005
|
)
|
(1,270,103
|
)
|
(472,805
|
)
|
|||||
|
Effect of exchange rate changes on cash and cash equivalents
|
(33
|
)
|
696
|
|
(1,411
|
)
|
|||||
|
Net (decrease) increase in cash and cash equivalents
|
(388,388
|
)
|
251,331
|
|
44,563
|
|
|||||
|
Cash and cash equivalents at beginning of period
|
1,404,382
|
|
1,153,051
|
|
1,108,488
|
|
|||||
|
Cash and cash equivalents at end of period
|
$
|
1,015,994
|
|
$
|
1,404,382
|
|
$
|
1,153,051
|
|
||
|
Supplemental cash flow disclosures:
|
|||||||||||
|
Income taxes paid, net
|
$
|
180,470
|
|
$
|
253,128
|
|
$
|
234,053
|
|
||
|
Interest paid
|
$
|
107,073
|
|
$
|
114,238
|
|
$
|
119,998
|
|
||
|
Non-cash activities:
|
|||||||||||
|
Issuance of common stock for the acquisition of Orbotech - financing activities
|
$
|
1,330,786
|
|
$
|
—
|
|
$
|
—
|
|
||
|
Contingent consideration payable - financing activities
|
$
|
6,905
|
|
$
|
—
|
|
$
|
—
|
|
||
|
Dividends payable - financing activities
|
$
|
7,340
|
|
$
|
9,571
|
|
$
|
13,772
|
|
||
|
Business acquisition holdback amounts - investing activities
|
$
|
440
|
|
$
|
—
|
|
$
|
5,318
|
|
||
|
Unsettled common stock repurchase - financing activities
|
$
|
8,000
|
|
$
|
—
|
|
$
|
—
|
|
||
|
Accrued purchase of land, property and equipment - investing activities
|
$
|
6,353
|
|
$
|
7,418
|
|
$
|
3,299
|
|
||
See accompanying notes to Consolidated Financial Statements.
66
KLA CORPORATION
Notes to Consolidated Financial Statements
NOTE 1— DESCRIPTION OF BUSINESS AND SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES
Description of Business and Principles of Consolidation.
On July 15, 2019, we changed our corporate name from “KLA-Tencor Corporation” to “KLA Corporation”. For purposes of this report, “KLA,” the “Company,” “we,” “our,” “us,” or similar references mean KLA Corporation, and its majority-owned subsidiaries unless the context requires otherwise. We are a supplier of process equipment, process control equipment, and data analytics products for a broad range of industries, including semiconductors, printed circuit boards and displays. We provide advanced process control and process-enabling solutions for manufacturing and testing wafers and reticles, integrated circuits (“IC” or “chip”), packaging, light emitting diodes, power devices, compound semiconductor devices, microelectromechanical systems, data storage, printed circuit boards and flat and flexible panel displays, as well as general materials research. Our comprehensive portfolio of inspection, metrology and data analytics products, and related services, helps integrated circuit manufacturers achieve target yield throughout the entire semiconductor fabrication process, from research and development to final volume production. We develop and sell advanced vacuum deposition and etching process tools, which are used by a broad range of specialty semiconductor customers. We enable electronic device manufacturers to inspect, test and measure printed circuit boards (“PCBs”) and flat panel displays (“FPDs) and ICs to verify their quality, pattern the desired electronic circuitry on the relevant substrate and perform three-dimensional shaping of materialized circuits on multiple surfaces. Our advanced products, coupled with our unique yield management services, allow us to deliver the solutions our semiconductor, printed circuit board and display customers need to achieve their productivity goals, by significantly reducing their risks and costs. Headquartered in Milpitas, California, we have subsidiaries both in the United States and in key markets throughout the world.
The Consolidated Financial Statements include the accounts of KLA and its majority-owned subsidiaries. All significant intercompany balances and transactions have been eliminated.
Acquisition of Orbotech, Ltd.
On
February 20, 2019
(the “Closing Date” or “Acquisition Date”), we completed the acquisition of Orbotech, Ltd. (“Orbotech”) for
$38.86
in cash and
0.25
of a share of our common stock in exchange for each ordinary share of Orbotech for a total consideration of
$3.26
billion. The acquisition of Orbotech is referred to as the “Orbotech Acquisition”. The Orbotech Acquisition was accounted for by applying the acquisition method of accounting for business combinations. The Consolidated Financial Statements in this report include the financial results of Orbotech prospectively from the Acquisition Date. For additional details, refer to Note 6 “Business Combinations.”
Subsequent to the Orbotech Acquisition, we changed our organizational structure, resulting in
four
reportable segments: Semiconductor Process Control; Specialty Semiconductor Process; PCB, Display and Component Inspection; and Other. Prior period results have been recast to conform to the current presentation. For additional information, refer to Note 17, “Segment Reporting and Geographic Information.”
Comparability.
Effective on the first day of fiscal 2019, we adopted Accounting Standards Update 2014-09, Revenue from Contracts with Customers (“ASC 606”). Prior periods were not retrospectively restated, and accordingly, the Consolidated Balance Sheets as of June 30, 2018, and the Consolidated Statements of Operations for the year ended June 30, 2018 were prepared using accounting standards that were different from those in effect for the year ended June 30, 2019.
Certain reclassifications have been made to the prior year’s Consolidated Financial Statements to conform to the current year presentation. The reclassifications did not have material effects on the prior year’s Consolidated Balance Sheets, Statements of Operations, Comprehensive Income and Cash Flows.
Management Estimates.
The preparation of the Consolidated Financial Statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions in applying our accounting policies that affect the reported amounts of assets and liabilities (and related disclosure of contingent assets and liabilities) at the date of the Consolidated Financial Statements and the reported amounts of revenues and expenses during the reporting periods. Actual results could differ from those estimates.
Cash Equivalents and Marketable Securities.
All highly liquid debt instruments with original or remaining maturities of less than three months at the date of purchase are considered to be cash equivalents. Marketable securities are generally classified as available-for-sale for use in current operations, if required, and are reported at fair value, with unrealized gains and losses, net of tax, presented as a separate component of stockholders’ equity under the caption “Accumulated other comprehensive income (loss).” All realized gains and losses and unrealized losses resulting from declines in fair value that are other than temporary are recorded in earnings in the period of occurrence. The specific identification method is used to determine the realized gains and losses on investments. For all investments in debt and equity securities, we assess whether the
67
impairment is other than temporary. If the fair value of a debt security is less than its amortized cost basis, an impairment is considered other than temporary if (i) we have the intent to sell the security or it is more likely than not that we will be required to sell the security before recovery of its entire amortized cost basis, or (ii) we do not expect to recover the entire amortized cost of the security. If an impairment is considered other than temporary based on condition (i), the entire difference between the amortized cost and the fair value of the security is recognized in earnings. If an impairment is considered other than temporary based on condition (ii), the amount representing credit losses, defined as the difference between the present value of the cash flows expected to be collected and the amortized cost basis of the debt security, will be recognized in earnings, and the amount relating to all other factors will be recognized in other comprehensive income (loss). We evaluate both qualitative and quantitative factors such as duration and severity of the unrealized losses, credit ratings, default and loss rates of the underlying collateral, structure and credit enhancements to determine if a credit loss may exist.
Non-Marketable Equity Securities.
We acquire certain non-marketable equity investments for the promotion of business and strategic objectives. Non-marketable equity securities do not give us the ability to exercise significant influence over the investees and are accounted for at cost, less impairment, plus or minus observable price changes for identical or similar securities of the same issuer. Non-marketable equity securities are included in “Other non-current assets” on the balance sheet. Non-marketable equity securities are subject to a periodic impairment review; however, since there are no open-market valuations, the impairment analysis requires significant judgment. This analysis includes assessment of the investee’s financial condition, the business outlook for its products and technology, its projected results and cash flow, financing transactions subsequent to the acquisition of the investment, the likelihood of obtaining subsequent rounds of financing and the impact of any relevant contractual equity preferences held by us or the others.
Variable Interest Entities.
We use a qualitative approach in assessing the consolidation requirement for variable interest entities. The approach focuses on identifying which enterprise has the power to direct the activities that most significantly impact the variable interest entity’s economic performance and which enterprise has the obligation to absorb losses or the right to receive benefits from the variable interest entity. In the event we are the primary beneficiary of a variable interest entity, the assets, liabilities, and results of operations of the variable interest entity will be included in our Consolidated Financial Statements. We have concluded that none of our equity investments require consolidation based on our most recent qualitative assessment.
Inventories.
Inventories are stated at the lower of cost (on a first-in, first-out basis) or net realizable value. Net realizable value is the estimated selling prices in the ordinary course of business, less costs of completion, disposal and transportation. Demonstration units are stated at their manufacturing cost and written down to their net realizable value. We review and set standard costs at current manufacturing costs in order to approximate actual costs. Our manufacturing overhead standards for product costs are calculated assuming full absorption of forecasted spending over projected volumes, adjusted for excess capacity. Abnormal inventory costs such as costs of idle facilities, excess freight and handling costs, and spoilage are recognized as current period charges. We write down product inventory based on forecasted demand and technological obsolescence and service spare parts inventory based on forecasted usage. These factors are impacted by market and economic conditions, technology changes, new product introductions and changes in strategic direction and require estimates that may include uncertain elements. Actual demand may differ from forecasted demand, and such differences may have a material effect on recorded inventory values.
Allowance for Doubtful Accounts.
A majority of our accounts receivable are derived from sales to large multinational semiconductor manufacturers throughout the world. In order to monitor potential credit losses, we perform ongoing credit evaluations of its customers’ financial condition. An allowance for doubtful accounts is maintained for probable credit losses based upon our assessment of the expected collectibility of the accounts receivable. The allowance for doubtful accounts is reviewed on a quarterly basis to assess the adequacy of the allowance.
Property and Equipment.
Property and equipment are recorded at cost, net of accumulated depreciation. Depreciation of property and equipment is based on the straight-line method over the estimated useful lives of the assets. The following table sets forth the estimated useful life for various asset categories:
|
Asset Category
|
Range of Useful Lives
|
|
Buildings
|
30 to 50 years
|
|
Leasehold improvements
|
Shorter of 15 years or lease term
|
|
Machinery and equipment
|
2 to 10 years
|
|
Office furniture and fixtures
|
7 years
|
68
Construction-in-process assets are not depreciated until the assets are placed in service. Depreciation expense for the fiscal years ended
June 30, 2019
,
2018
and
2017
was
$72.6 million
,
$53.3 million
and
$49.1 million
, respectively.
Goodwill and Purchased Intangible Assets.
Effective May 1, 2019, with the change in our reportable segments, we have determined there are now
six
reporting units, to which goodwill is allocated using an acquisition accounting method. We assess goodwill for impairment annually as well as whenever events or changes in circumstances indicate that the carrying value may not be recoverable. We perform either a qualitative or quantitative analysis when testing a reporting unit’s goodwill for impairment. A qualitative goodwill impairment test is performed when the fair value of a reporting unit historically has significantly exceeded the carrying value of its net assets and based on current operations is expected to continue to do so. Otherwise, we are required to conduct a quantitative impairment test for each reporting unit and estimates the fair value of each reporting unit using a combination of a discounted cash flow analysis and a market approach based on market multiples. If the fair value of a reporting unit is less than its carrying value, a goodwill impairment charge is recorded for the difference. We performed our annual qualitative assessment of the goodwill by reporting unit during the third quarter of the fiscal year ended June 30,
2019
and concluded that there was
no
impairment. In addition, as a result of the Orbotech Acquisition, during the fourth quarter of the fiscal year ended June 30, 2019 we updated our organizational structure and performed a qualitative assessment of the goodwill for our reporting units, which were impacted by the organizational change, and concluded that there were no impairment indicators affecting the valuation of goodwill subsequent to our annual impairment test. The next annual evaluation of the goodwill by reporting unit will be performed in the third quarter of the fiscal year ending June 30,
2020
.
Long-lived purchased intangible assets are tested for impairment whenever events or changes in circumstances indicate that their carrying amounts may not be recoverable. See Note 7, “Goodwill and Purchased Intangible Assets” for additional details.
Impairment of Long-Lived Assets.
We evaluate the carrying value of our long-lived assets whenever events or changes in circumstances indicate that the carrying value of the asset may be impaired. An impairment loss is recognized when estimated future cash flows expected to result from the use of the asset, including disposition, are less than the carrying value of the asset. Such an impairment charge would be measured as the excess of the carrying value of the asset over its fair value.
Concentration of Credit Risk.
Financial instruments that potentially subject us to significant concentrations of credit risk consist primarily of cash equivalents, short-term marketable securities, trade accounts receivable and derivative financial instruments used in hedging activities. We invest in a variety of financial instruments, such as, but not limited to, certificates of deposit, corporate debt and municipal securities, United States Treasury and Government agency securities, and equity securities and, by policy, limits the amount of credit exposure with any one financial institution or commercial issuer. We have not experienced any material credit losses on our investments.
A majority of our accounts receivable are derived from sales to large multinational semiconductor manufacturers located throughout the world, with a majority located in Asia. In recent years, our customer base has become increasingly concentrated due to corporate consolidations, acquisitions and business closures, and to the extent that these customers experience liquidity issues in the future, we may be required to incur additional bad debt expense with respect to trade receivables. We perform ongoing credit evaluations of our customers’ financial condition and generally require no collateral to secure accounts receivable. We maintain an allowance for potential credit losses based upon expected collectibility risk of all accounts receivable. In addition, we may utilize letters of credit, credit insurance or non-recourse factoring to mitigate credit risk when considered appropriate.
We are exposed to credit loss in the event of non-performance by counterparties on the foreign exchange contracts that we use in hedging activities and in certain factoring transactions. These counterparties are large international financial institutions, and to date no such counterparty has failed to meet its financial obligations to us under such contracts.
The following customers each accounted for more than
10%
of total revenues primarily in Semiconductor Process Control segment for the indicated periods:
|
Year ended June 30,
|
||||
|
2019
|
2018
|
2017
|
||
|
Taiwan Semiconductor Manufacturing Company Limited
|
Samsung Electronics Co., Ltd.
|
Samsung Electronics Co., Ltd.
|
||
|
|
|
Taiwan Semiconductor Manufacturing Company Limited
|
||
69
The following customers each accounted for more than
10%
of net accounts receivable as of the dates indicated below:
|
As of June 30,
|
||
|
2019
|
2018
|
|
|
Taiwan Semiconductor Manufacturing Company Limited
|
Samsung Electronics Co., Ltd.
|
|
|
Taiwan Semiconductor Manufacturing Company Limited
|
||
|
SK Hynix, Inc.
|
||
Foreign Currency.
The functional currencies of our foreign subsidiaries are primarily the local currencies, except as described below. Accordingly, all assets and liabilities of these foreign operations are translated to U.S. dollars at current period end exchange rates, and revenues and expenses are translated to U.S. dollars using average exchange rates in effect during the period. The gains and losses from foreign currency translation of these subsidiaries’ financial statements are recorded directly into a separate component of stockholders’ equity under the caption “Accumulated other comprehensive income (loss).”
Our manufacturing subsidiaries in Singapore, Israel, Germany, and United Kingdom use the U.S. dollar as their functional currency. Accordingly, monetary assets and liabilities in non-functional currency of these subsidiaries are remeasured using exchange rates in effect at the end of the period. Revenues and costs in local currency are remeasured using average exchange rates for the period, except for costs related to those balance sheet items that are remeasured using historical exchange rates. The resulting remeasurement gains and losses are included in the Consolidated Statements of Operations as incurred.
Derivative Financial Instruments.
We use financial instruments, such as forward exchange contracts and currency options, to hedge a portion of, but not all, existing and forecasted foreign currency denominated transactions. The purpose of our foreign currency program is to manage the effect of exchange rate fluctuations on certain foreign currency denominated revenues, costs and eventual cash flows. The effect of exchange rate changes on forward exchange contracts is expected to offset the effect of exchange rate changes on the underlying hedged items. We also use interest rate lock agreements to hedge the risk associated with the variability of cash flows due to changes in the benchmark interest rate of the intended debt financing. We believe these financial instruments do not subject us to speculative risk that would otherwise result from changes in currency exchange rates or interest rates. All of our derivative financial instruments are recorded at fair value based upon quoted market prices for comparable instruments adjusted for risk of counterparty non-performance.
For derivative instruments designated and qualifying as cash flow hedges of forecasted foreign currency denominated transactions or debt financing expected to occur within twelve to eighteen months, the effective portion of the gains or losses is reported in accumulated other comprehensive income (loss) (“OCI”) and reclassified into earnings in the same period or periods during which the hedged transaction affects earnings. In the second quarter of our fiscal year ending June 30, 2019, we early adopted the new accounting guidance for hedge accounting. Prior to adopting this new accounting guidance, time value was excluded from the assessment of effectiveness for derivative instruments designated as cash flow hedges. Time value was amortized on a mark-to-market basis and recognized in earnings over the life of the derivative contract. For derivative contracts executed after adopting the new accounting guidance, the election to include time value for the assessment of effectiveness is made on all forward contracts designated as cash flow hedges. The change in fair value of the derivative are recorded in OCI until the hedged transaction is recognized in earnings. The assessment effectiveness of options contracts designated as cash flow hedges continue to exclude time value after adopting the new accounting guidance. The initial value of the component excluded from the assessment of effectiveness are recognized in earnings over the life of the derivative contracts. Any difference between change in the fair value of the excluded components and the amounts recognized in earnings are recorded in OCI. For derivative instruments that are not designated as a cash flow hedge, gains and losses are recognized in other expense (income), net. We use foreign currency forward contracts to hedge certain foreign currency denominated assets or liabilities. The gains and losses on these derivative instruments are largely offset by the changes in the fair value of the assets or liabilities being hedged.
Revenue Recognition.
We primarily derive revenue from the sale of process control and yield management solutions for the semiconductor and related nanoelectronics industries, maintenance and support of all these products, installation and training services and the sale of spare parts. Our solutions provide a comprehensive portfolio of inspection, metrology and data analytics products, which are accompanied by a flexible portfolio of services to enable our customers to maintain the performance and productivity of the solutions purchased. The acquisition of Orbotech enabled us to broaden our portfolio to include the yield enhancement and production solutions used by manufacturers of printed circuit boards, flat panel displays, advanced packaging, micro-electro-mechanical systems and other electronic components.
Our solutions are generally not sold with a right of return, nor have we experienced significant returns from or refunds to our customers.
70
We account for a contract with a customer when there is approval and commitment from both parties, the rights of the parties are identified, payment terms are identified, the contract has commercial substance and collectibility of consideration is probable.
Our revenues are measured based on consideration stipulated in the arrangement with each customer, net of any sales incentives and amounts collected on behalf of third parties, such as sales taxes. The revenues are recognized as separate performance obligations that are satisfied by transferring control of the product or service to the customer.
Our arrangements with our customers include various combinations of products and services, which are generally capable of being distinct and accounted for as separate performance obligations. A product or service is considered distinct if it is separately identifiable from other deliverables in the arrangement and if a customer can benefit from it on its own or with other resources that are readily available to the customer.
The transaction consideration, including any sales incentives, is allocated between separate performance obligations of an arrangement based on the stand-alone selling prices (“SSP”) for each distinct product or service. Management considers a variety of factors to determine the SSP, such as, historical standalone sales of products and services, discounting strategies and other observable data.
From time to time, our contracts are modified to account for additional, or to change existing, performance obligations. Our contract modifications are generally accounted for prospectively.
Product Revenue
We recognize revenue from product sales at a point in time when we have satisfied our performance obligation by transferring control of the product to the customer. We use judgment to evaluate whether the control has transferred by considering several indicators, including:
|
•
|
whether we have a present right to payment;
|
|
•
|
the customer has legal title;
|
|
•
|
the customer has physical possession;
|
|
•
|
the customer has significant risk and rewards of ownership; and
|
|
•
|
the customer has accepted the product, or whether customer acceptance is considered a formality based on history of acceptance of similar products (for example, when the customer has previously accepted the same tool, with the same specifications, and when we can objectively demonstrate that the tool meets all of the required acceptance criteria, and when the installation of the system is deemed perfunctory).
|
Not all of the indicators need to be met for us to conclude that control has transferred to the customer. In circumstances in which revenue is recognized prior to the product acceptance, the portion of revenue associated with our performance obligations to install product is deferred and recognized upon acceptance.
We enter into volume purchase agreements with some of our customers. We adjust the transaction consideration for estimated credits earned by our customers for such incentives. These credits are estimated based upon the forecasted and actual product sales for any given period and agreed-upon incentive rate. The estimate is updated at each reporting period.
We offer perpetual and term licenses for defects and data analysis software. The primary difference between perpetual and term licenses is the duration over which the customer can benefit from the use of the software, while the functionality and the features of the software are the same. With the acquisition of Orbotech we offer computer-aided manufacturing and engineering software solutions for the printed circuit boards production. Software is generally bundled with post-contract customer support (“PCS”), which includes unspecified software updates that are made available throughout the entire term of the arrangement. Revenue from software licenses is recognized at a point in time, when the software is made available to the customer. Revenue from PCS is deferred at contract inception and recognized ratably over the service period, or as services are performed.
Services and Spare Parts Revenue
The majority of product sales include a standard
6
to
12
-month warranty that is not separately paid for by the customers. The customers may also purchase extended warranty for periods beyond the initial year as part of the initial product sale. We have concluded that the standard
12
-month warranty as well as any extended warranty periods included in the initial product sales are separate performance obligations. The estimated fair value of warranty services is deferred and recognized ratably as revenue over the warranty period, as the customer simultaneously receives and consumes the benefits of warranty services provided by us.
71
Additionally, we offer product maintenance and support services, which the customer may purchase separately from the standard and extended warranty offered as part of the initial product sale. Revenue from separately negotiated maintenance and support service contracts is also recognized over time based on the terms of the applicable service period. Revenue from services performed in the absence of a maintenance contract, including training revenue, is recognized when the related services are performed. We also sell spare parts, revenue from which is recognized when control over the spare parts is transferred to the customer.
Installation services include connecting and validating configuration of the product. In addition, several testing protocols are completed to confirm the equipment is performing to customer specifications. Revenues from product installation are deferred and recognized at a point in time, once installation is complete.
Significant Judgments
Our contracts with our customers often include promises to transfer multiple products and services. Each product and service is generally capable of being distinct within the context of the contract and represents a separate performance obligation. Determining the SSP for each distinct performance obligation and allocation of consideration from an arrangement to the individual performance obligations and the appropriate timing of revenue recognition are significant judgments with respect to these arrangements. We typically estimate the SSP of products and services based on observable transactions when the products and services are sold on a standalone basis and those prices fall within a reasonable range. We typically have more than one SSP for individual products and services due to the stratification of these products by customers and circumstances. In these instances, we use information such as the size of the customer, geographic region, as well as customization of the products in determining the SSP. In instances where the SSP is not directly observable, we determine the SSP using information that includes market conditions, entity-specific factors, including discounting strategies, information about the customer or class of customer that is reasonably available and other observable inputs. While changes in the allocation of SSP between performance obligations will not affect the amount of total revenue recognized for a particular contract, any material changes could impact the timing of revenue recognition, which could have a material effect on our financial position and result of operations.
Although the products are generally not sold with a right of return, we may provide other credits or sales incentives, which are accounted for either as variable consideration or material right, depending on the specific terms and conditions of the arrangement. These credits and incentives are estimated at contract inception and updated at the end of each reporting period if and when additional information becomes available.
As outlined above, we use judgments to evaluate whether or not the customer has obtained control of the product and considers the several indicators in evaluating whether or not control has transferred to the customer. Not all of the indicators need to be met for us to conclude that control has transferred to the customer.
Contract Assets/Liabilities
The timing of revenue recognition, billings and cash collections may result in accounts receivable, contract assets, and contract liabilities (deferred revenue) on our Consolidated Balance Sheets. A receivable is recorded in the period we deliver products or provide services when we have an unconditional right to payment. Contract assets primarily relate to the value of products and services transferred to the customer for which the right to payment is not just dependent on the passage of time. Contract assets are transferred to receivable when rights to payment become unconditional.
A contract liability is recognized when we receive payment or have an unconditional right to payment in advance of the satisfaction of performance. The contract liabilities represent (1) deferred product revenue related to the value of products that have been shipped and billed to customers and for which the control has not been transferred to the customers, and (2) deferred service revenue, which is recorded when we receive consideration, or such consideration is unconditionally due, from a customer prior to transferring services to the customer under the terms of a contract. Deferred service revenue typically results from warranty services, and maintenance and other service contracts.
Contract assets and liabilities related to rights and obligations in a contract are recorded net in the Consolidated Balance Sheets. Upon the adoption of ASC 606, deferred costs of revenue are included in other current assets while under the legacy guidance deferred costs of revenue was included in deferred system profit.
Research and Development Costs.
Research and development costs are expensed as incurred.
Shipping and Handling Costs.
Shipping and handling costs are included as a component of cost of sales.
72
Accounting for Stock-Based Compensation Plans.
We account for stock-based awards granted to employees for services based on the fair value of those awards. The fair value of stock-based awards is measured at the grant date and is recognized as expense over the employee’s requisite service period. The fair value for restricted stock units granted without “dividend equivalent” rights is determined using the closing price of our common stock on the grant date, adjusted to exclude the present value of dividends which are not accrued on the restricted stock units. The fair value for restricted stock units granted with “dividend equivalent” rights is determined using the closing price of our common stock on the grant date. The award holder is not entitled to receive payments under dividend equivalent rights unless the associated restricted stock unit award vests (i.e., the award holder is entitled to receive credits, payable in cash or shares of common stock, equal to the cash dividends that would have been received on the shares of our common stock underlying the restricted stock units had the shares been issued and outstanding on the dividend record date, but such dividend equivalents are only paid subject to the recipient satisfying the vesting requirements of the underlying award). Compensation expense for restricted stock units with performance metrics is calculated based upon expected achievement of the metrics specified in the grant, or when a grant contains a market condition, the grant date fair value using a Monte Carlo simulation. The Monte Carlo simulation incorporates estimates of the potential outcomes of the market condition on the grant date fair value of each award. Additionally, we estimate forfeitures based on historical experience and revise those estimates in subsequent periods if actual forfeitures differ from the estimated amounts. The fair value is determined using a Black-Scholes valuation model for purchase rights under our Employee Stock Purchase Plan. The Black-Scholes option-pricing model requires the input of assumptions, including the option’s expected term and the expected price volatility of the underlying stock. The expected stock price volatility assumption is based on the market-based historical implied volatility from traded options of our common stock.
Accounting for Cash-Based Long-Term Incentive Compensation.
Cash-based long-term incentive (“Cash LTI”) awards issued to employees under our Cash LTI program vests in
three
or
four
equal installments, with
one-third
or
one-fourth
of the aggregate amount of the Cash LTI award vesting on each yearly anniversary of the grant date over a
three
or
four
-year period. In order to receive payments under a Cash LTI award, participants must remain employed by us as of the applicable award vesting date. Compensation expense related to the Cash LTI awards is recognized over the vesting term and adjusted for the impact of estimated forfeitures.
Accounting for Non-qualified Deferred Compensation Plan.
We have a non-qualified deferred compensation plan (known as “Executive Deferred Savings Plan”) under which certain executives and non-employee directors may defer a portion of their compensation. Participants are credited with returns based on their allocation of their account balances among measurement funds. We control the investment of these funds, and the participants remain general creditors of ours. We invest these funds in certain mutual funds and such investments are classified as trading securities in the Consolidated Balance Sheets. Investments in trading securities are measured at fair value in the statement of financial position. Unrealized holding gains and losses for trading securities are included in earnings. Distributions from the Executive Deferred Savings Plan commence following a participant’s retirement or termination of employment or on a specified date allowed per the Executive Deferred Savings Plan provisions, except in cases where such distributions are required to be delayed in order to avoid a prohibited distribution under Internal Revenue Code Section 409A. Participants can generally elect the distributions to be paid in lump sum or quarterly cash payments over a scheduled period for up to
15 years
and are allowed to make subsequent changes to their existing elections as permissible under the Executive Deferred Savings Plan provisions. The liability associated with the Executive Deferred Savings Plan is included as a component of other current liabilities in the Consolidated Balance Sheets. Changes in the Executive Deferred Savings Plan liability is recorded in selling, general and administrative expense in the Consolidated Statements of Operations. The expense associated with changes in the liability included in selling, general and administrative expense was
$13.6 million
,
$19.9 million
and
$20.9 million
for the fiscal years ended
June 30, 2019
,
2018
and
2017
, respectively. We also have a deferred compensation asset that corresponds to the liability under the Executive Deferred Savings Plan and it is included as a component of other non-current assets in the Consolidated Balance Sheets. Changes in the Executive Deferred Savings Plan assets are recorded as gains (losses), net in selling, general and administrative expense in the Consolidated Statements of Operations. The amount of net gains included in selling, general and administrative expense were
$14.7 million
,
$19.5 million
and
$20.8 million
for the fiscal years ended
June 30, 2019
,
2018
and
2017
, respectively.
Income Taxes.
We account for income taxes in accordance with the authoritative guidance, which requires income tax effects for changes in tax laws are recognized in the period in which the law is enacted.
Transition tax liability is recognized in the period when the change in the U.S. tax law was enacted and the income tax effects are recorded as a component of provision for income taxes from continuing operations. Several inputs were considered in the calculation, such as the calculation of the post-1986 foreign earnings and profit (“E&P”), income tax pools for all foreign subsidiaries, and the amount of those earnings held in cash and other specified assets. We applied the current interpretations from the U.S. federal and state governments and regulatory organization in its calculation of the transition tax liability.
73
Deferred tax assets and liabilities are recognized using enacted tax rates for the effect of temporary differences between the book and tax bases of recorded assets and liabilities. The guidance also requires that deferred tax assets be reduced by a valuation allowance if it is more likely than not that a portion of the deferred tax asset will not be realized. We have determined that a valuation allowance is necessary against a portion of the deferred tax assets, but we anticipate that our future taxable income will be sufficient to recover the remainder of our deferred tax assets. However, should there be a change in our ability to recover our deferred tax assets that are not subject to a valuation allowance, we could be required to record an additional valuation allowance against such deferred tax assets. This would result in an increase to our tax provision in the period in which we determine that the recovery is not probable.
On a quarterly basis, we provide for income taxes based upon an estimated annual effective income tax rate. The effective tax rate is highly dependent upon the geographic composition of worldwide earnings, tax regulations governing each region, availability of tax credits and the effectiveness of our tax planning strategies. We carefully monitor the changes in many factors and adjust our effective income tax rate on a timely basis. If actual results differ from these estimates, this could have a material effect on our financial condition and results of operations.
The calculation of our tax liabilities involves dealing with uncertainties in the application of complex tax regulations. In accordance with the authoritative guidance on accounting for uncertainty in income taxes, we recognize liabilities for uncertain tax positions based on the two-step process. The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates that it is more likely than not that the position will be sustained in audit, including resolution of related appeals or litigation processes, if any. The second step is to measure the tax benefit as the largest amount that is more than 50% likely of being realized upon ultimate settlement. We reevaluate these uncertain tax positions on a quarterly basis. This evaluation is based on factors including, but not limited to, changes in facts or circumstances, changes in tax law, effectively settled issues under audit and new audit activity. Any change in these factors could result in the recognition of a tax benefit or an additional charge to the tax provision.
We record income taxes on the undistributed earnings of foreign subsidiaries unless the subsidiaries’ earnings are considered indefinitely reinvested outside the U.S. Our effective tax rate would be adversely affected if we change our intent or if such undistributed earnings are needed for U.S. operations because we would be required to provide or pay income taxes on some or all of these undistributed earnings.
Global Intangible Low-Taxed Income.
The Tax Cuts and Jobs Act (the “Act”) includes provisions for Global Intangible Low-Taxed Income (“GILTI”) wherein taxes on foreign income are imposed in excess of a deemed return on tangible assets of foreign corporations. This income will effectively be taxed at a 10.5% tax rate in general. As a result, our deferred tax assets and liabilities were being evaluated to determine if the deferred tax assets and liabilities should be recognized for the basis differences expected to reverse as a result of GILTI provisions that are effective for us after the fiscal year ending June 30, 2018, or should the tax on GILTI provisions be recognized as period costs in each year incurred. We elected to account for GILTI as a component of current period tax expense starting from the first quarter of the fiscal year ending June 30, 2019.
Business Combinations.
Accounting for business combinations requires management to make significant estimates and assumptions to determine the fair values of assets acquired and liabilities assumed at the acquisition date. Although we believe the assumptions and estimates we have made in the past have been reasonable and appropriate, they are based, in part, on historical experience and information obtained from management of the acquired companies and are inherently uncertain. Critical estimates in valuing certain acquired intangible assets include, but are not limited to future expected cash flows including revenue growth rate assumptions from product sales, customer contracts and acquired technologies, expected costs to develop in-process research and development into commercially viable products, estimated cash flows from the projects when completed, including assumptions associated with the technology migration curve, estimated royalty rates used in valuing technology related intangible assets, and discount rates. The discount rates used to discount expected future cash flows to present value are typically derived from a weighted-average cost of capital analysis and adjusted to reflect inherent risks. Unanticipated events and circumstances may occur that could affect either the accuracy or validity of such assumptions, estimates or actual results.
We allocate the fair value of the purchase price of our acquisitions to the tangible assets acquired, liabilities assumed, and intangible assets acquired, including in-process research and development (“IPR&D”), based on their estimated fair values. The excess of the fair value of the purchase price over the fair values of these net tangible and intangible assets acquired is recorded as goodwill. Management’s estimates of fair value are based upon assumptions believed to be reasonable, but our estimates and assumptions are inherently uncertain and subject to refinement. As a result, during the measurement period, which will not exceed one year from the acquisition date, we record adjustments to the assets acquired and liabilities assumed with the corresponding offset to goodwill. Upon the conclusion of the measurement period or final determination of the fair value of the purchase price of our acquisitions, whichever comes first, any subsequent adjustments are recorded to our Consolidated Statements of Operations.
74
The fair value of IPR&D is initially capitalized as an intangible asset with an indefinite life and assessed for impairment thereafter whenever events or changes in circumstances indicate that the carrying value of the IPR&D assets may not be recoverable. Impairment of IPR&D is recorded to research and development expenses. When an IPR&D project is completed, the IPR&D is reclassified as an amortizable purchased intangible asset and amortized to costs of revenues over the asset’s estimated useful life.
Acquisition-related expenses are recognized separately from the business combination and are expensed as incurred.
Net Income Per Share.
Basic net income per share is calculated by dividing net income available to common stockholders by the weighted-average number of common shares outstanding during the period. Diluted net income per share is calculated by using the weighted-average number of common shares outstanding during the period increased to include the number of additional shares of common stock that would have been outstanding if the dilutive potential shares of common stock had been issued. The dilutive effect of restricted stock units and options is reflected in diluted net income per share by application of the treasury stock method. The dilutive securities are excluded from the computation of diluted net loss per share when a net loss is recorded for the period as their effect would be anti-dilutive.
Contingencies and Litigation.
We are subject to the possibility of losses from various contingencies. Considerable judgment is necessary to estimate the probability and amount of any loss from such contingencies. An accrual is made when it is probable that a liability has been incurred or an asset has been impaired and the amount of loss can be reasonably estimated. We accrue a liability and recognize as expense the estimated costs expected to be incurred to defend or settle asserted and unasserted claims existing as of the balance sheet date. See Note 14, “Commitments and Contingencies” and Note 15, “Litigation and Other Legal Matters” for additional details.
Recent Accounting Pronouncements
Recently Adopted
In May 2014, the Financial Accounting Standards Board (“FASB”) issued ASC 606, which supersedes the guidance in ASC 605, Revenue Recognition (“ASC 605”). Under ASC 606, revenue is recognized when a customer obtains control of promised goods or services in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. In addition, ASC 606 requires enhanced disclosures, including disclosure of the nature, amount, timing, and uncertainty of revenue and cash flows arising from contracts with customers. We adopted the ASC 606 as of July 1, 2018 in our first quarter of our fiscal year ending June 30, 2019, using the modified retrospective transition approach. For additional detail, refer to Note 2 “Revenue.”
In January 2016, the FASB issued an accounting standard update that changes the accounting for financial instruments primarily related to equity investments (other than those accounted for under the equity method of accounting or those that result in consolidation of the investee), financial liabilities under the fair value option, and the presentation and disclosure requirements for financial instruments. We adopted this update beginning in the first quarter of our fiscal year ending June 30, 2019 on a prospective basis and the adoption had no material impact on our Consolidated Financial Statements.
In August 2016, the FASB issued an accounting standard update intended to clarify how certain cash receipts and cash payments are presented and classified in the statement of cash flows. We adopted this update beginning in the first quarter of our fiscal year ending June 30, 2019 on a retrospective basis and the adoption had no material impact on our Consolidated Financial Statements.
In October 2016, the FASB issued an accounting standard update to recognize the income tax consequences of intra-entity transfers of assets other than inventory when they occur. This eliminates the exception to postpone recognition until the asset has been sold to an outside party. We adopted this update beginning in the first quarter of our fiscal year ending June 30, 2019 on a modified retrospective basis and the adoption had no material impact on our Consolidated Financial Statements.
In January 2017, the FASB issued an accounting standard on clarifying the definition of a business, with the objective of adding guidance to assist entities with evaluating whether transactions should be accounted for as acquisitions (or disposals) of assets or businesses. We adopted this update beginning in the first quarter of our fiscal year ending June 30, 2019 on a prospective basis and the adoption had no material impact on our Consolidated Financial Statements.
75
In January 2017, the FASB issued an accounting standard update to simplify the subsequent measurement of goodwill by removing the second step of the two-step impairment test, which requires an entity to determine the fair value of assets and liabilities similar to what is required in a purchase price allocation. Under the update, goodwill impairment will be calculated as the amount by which a reporting unit’s carrying value exceeds our fair value. We early adopted this update in the first quarter of our fiscal year ending June 30, 2019 on a prospective basis and the adoption had no material impact on our Consolidated Financial Statements.
In March 2017, the FASB issued an accounting standard update that changes the statements of operations classification of net periodic benefit cost related to defined benefit pension and/or other post-retirement benefit plans. Under the update, employers will present the service cost component of net periodic benefit cost in the same statements of operations line item(s) as other employee compensation costs arising from services rendered during the period. Only the service cost component will be eligible for capitalization in assets. Employers will present the other components of the net periodic benefit costs separately from the line item(s) that includes the service cost and outside of any subtotal of operating income, if one is presented. We adopted this update beginning in the first quarter of our fiscal year ending June 30, 2019 on a retrospective basis and the adoption had no material impact on our Consolidated Financial Statements.
In May 2017, the FASB issued an accounting standard update regarding stock compensation that provides guidance about which changes to the terms and conditions of a share-based payment award require an entity to apply modification accounting in order to reduce diversity in practice and reduce complexity. We adopted this update beginning in the first quarter of our fiscal year ending June 30, 2019 on a prospective basis and the adoption had no material impact on our Consolidated Financial Statements.
In August 2017, the FASB issued an accounting standard update to hedge accounting to better align risk management activities by refining financial and non-financial hedging strategy eligibilities. This update also amends the presentation and disclosure requirements to increase transparency to better understand an entity’s risk exposures and how hedging strategies are used to manage those exposures. We early adopted this update in the second quarter of our fiscal year ending June 30, 2019 under the modified retrospective approach. The cumulative effect adjustment for the elimination of the ineffectiveness was not material to our Consolidated Financial Statements. The presentation and disclosure have been amended on a prospective basis, as required by this update.
In February 2018, the FASB issued an accounting standard update that provides an option to reclassify disproportional tax effects and other income tax effects (“stranded tax effects”) caused by the Tax Cuts and Jobs Act (“the Act”) from accumulated other comprehensive income (“AOCI”) to retained earnings. We early adopted this update in the first quarter of our fiscal year ending June 30, 2019 and applied this update in the period of adoption. As a result of the adoption, we made a reclassification from AOCI to beginning retained earnings of approximately
$10.9 million
related to the stranded tax effects.
Updates Not Yet Effective
In February 2016, the FASB issued an accounting standard update, Leases (Topic 842), (“ASC 842”) which supersedes the lease recognition requirements in Leases (Topic 840), (“ASC 840”). ASC 842 establishes a right- of-use (“ROU”) model that requires a lessee to record a ROU asset and a lease liability on the balance sheet for all leases. Consistent with ASC 840, leases will be classified as either finance or operating, with classification affecting the pattern of expense recognition in the statements of operations. The new guidance will be effective for us starting in the first quarter of our fiscal year ending June 30, 2020. ASC 842 requires a modified retrospective transition approach for capital and operating leases existing at, or entered into after, the beginning of the earliest comparative period presented in the financial statements. In July 2018, the FASB issued an accounting standard update which amends ASC 842 and offers an additional (and optional) transition method by which entities may elect not to recast the comparative periods presented in financial statements in the period of adoption. This ASU has the same transition requirements and effective date as ASC 842. We will adopt ASC 842 using the optional adoption method and thereby not adjust comparative financial statements. Consequently, our reporting for the comparative periods presented in the year of adoption would continue to be in accordance with ASC 840, including the disclosure requirements of ASC 840. We currently plan to apply the package of practical expedients to leases that commenced before the effective date whereby we will elect to not reassess the following: (i) whether any expired or existing contracts contain leases; (ii) the lease classification for any expired or existing leases; and (iii) initial direct costs for any existing leases. We have enhanced system functionality to enable the preparation and reporting of financial information and are evaluating related processes and internal controls. We expect the most significant impact upon the adoption of this standard to be the recognition of ROU assets and lease liabilities on our Consolidated Balance Sheets. We do not expect the adoption of this standard will have a significant impact on our Consolidated Statements of Operations or Cash Flows.
76
In June 2016, the FASB issued an accounting standard update that changes the accounting for recognizing impairments of financial assets. Under the update, credit losses for certain types of financial instruments will be estimated based on expected losses. The update also modifies the impairment models for available-for-sale debt securities and for purchased financial assets with credit deterioration since their origination. This update is effective for us beginning in the first quarter of our fiscal year ending June 30, 2021, with early adoption permitted starting in the first quarter of fiscal year ending June 30, 2020. We are currently evaluating the impact of this accounting standard update on our Consolidated Financial Statements.
In August 2018, the FASB issued an accounting standard update which modifies the existing accounting standards for fair value measurement disclosure. This update eliminates the disclosure of the amount of and reasons for transfers between level 1 and level 2 of the fair value hierarchy, and the policy for timing of transfers between levels. This standard update is effective for us beginning in the first quarter of our fiscal year ending June 30, 2021, and early adoption is permitted. We are currently evaluating the impact of this accounting standard update on our Consolidated Financial Statements.
In August 2018, the FASB issued an accounting standard update to amend the disclosure requirements related to defined benefit pension and other post-retirement plans. Some of the changes include adding a disclosure requirement for significant gains and losses related to changes in the benefit obligation for the period and removing the amounts in accumulated other comprehensive income expected to be recognized as components of net periodic benefit cost over the next fiscal year. This standard update is effective for us beginning in the first quarter of the fiscal year ending June 30, 2021, and early adoption is permitted. We are currently evaluating the impact of this accounting standard update on our Consolidated Financial Statements.
In August 2018, the FASB issued an accounting standard update to align the requirements for capitalizing implementation costs incurred in a cloud computing arrangement that is a service contract with the requirements for capitalizing implementation costs incurred to develop or obtain internal-use software. The guidance clarifies which costs should be capitalized including the cost to acquire the license and the related implementation costs. This standard update is effective for us beginning in the first quarter of our fiscal year ending June 30, 2021, with an option to be adopted either prospectively or retrospectively. Early adoption is permitted. We are currently evaluating the impact of this accounting standard update on our Consolidated Financial Statements.
NOTE 2 — REVENUE
New Revenue Accounting Standard
Method and Impact of Adoption
At the beginning of the fiscal year 2019, we adopted ASC 606 using the modified retrospective transition approach for all contracts completed and not completed as of the date of adoption. Under the modified retrospective transition approach, periods prior to the adoption date were not adjusted and continue to be reported in accordance with ASC 605. A cumulative effect of applying ASC 606 was recorded to the beginning retained earnings to reflect the impact of all existing arrangements under ASC 606.
The cumulative effect of applying ASC 606 represents a net decrease to retained earnings of
$21.0 million
as of July 1, 2018, which primarily related to the following:
|
•
|
A decrease of approximately
$97.0 million
in retained earnings related to the deferral of estimated fair value of the warranty services provided with our products for which revenue will be recognized in future periods under ASC 606. Further, upon adoption of ASC 606, we recognize the standard warranty for a majority of products as a separate performance obligation, while in prior periods, we accounted for the estimated warranty cost as a charge to costs of revenues when revenue was recognized. This was partially offset by an increase in retained earnings of approximately
$37.0 million
related to reversal of standard warranty expense, which was charged to costs of revenues in prior periods.
|
|
•
|
An increase in retained earnings of approximately
$26.0 million
due to a change in the timing of transfer of control over products to the customers.
|
Under ASC 606, revenue is recognized earlier than it would have been recognized under legacy guidance primarily due to our assessment of timing of transfer of control. Additionally, we render standard warranty coverage on our products for
12 months
, providing labor and parts necessary to repair and maintain the products during the warranty period. Prior to adoption of ASC 606, we accounted for the estimated warranty cost as a charge to costs of sales when revenue was recognized. Upon adoption of ASC 606, the standard warranty for the majority of products is recognized as a separate performance obligation in service revenue.
77
Consistent with our policy, revenue on the majority of Orbotech’s contracts is recognized upon delivery because this represents the point in time at which control is transferred to the customers. Revenues derived from performance obligations such as warranty and service contracts are recognized over the period of the service.
The following table, including the results from the acquisition of Orbotech, summarizes the effects of adopting ASC 606 on our Consolidated Balance Sheets as follows:
|
As of June 30, 2019 (In thousands)
|
As Reported Under
ASC 606
|
Prior to
Adoption of
ASC 606
|
Effect of Changes
|
||||||||
|
ASSETS
|
|||||||||||
|
Accounts receivable, net
|
$
|
990,113
|
|
$
|
1,097,098
|
|
$
|
(106,985
|
)
|
||
|
Other current assets
|
323,077
|
|
158,342
|
|
164,735
|
|
|||||
|
Deferred income taxes
|
206,141
|
|
195,537
|
|
10,604
|
|
|||||
|
LIABILITIES
|
|||||||||||
|
Deferred system revenue
|
$
|
282,348
|
|
$
|
—
|
|
$
|
282,348
|
|
||
|
Deferred service revenue
|
206,669
|
|
114,874
|
|
91,795
|
|
|||||
|
Deferred system profit
|
—
|
|
382,085
|
|
(382,085
|
)
|
|||||
|
Other current liabilities
|
827,054
|
|
853,253
|
|
(26,199
|
)
|
|||||
|
Deferred service revenue, non-current
|
98,772
|
|
88,289
|
|
10,483
|
|
|||||
|
STOCKHOLDERS
’
EQUITY
|
|||||||||||
|
Retained earnings
|
$
|
714,825
|
|
$
|
622,989
|
|
$
|
91,836
|
|
||
|
Accumulated other comprehensive income (loss)
|
(73,029
|
)
|
(73,205
|
)
|
176
|
|
|||||
The following table, including the results from the acquisition of Orbotech, summarizes the effects of adopting ASC 606 on our Consolidated Statements of Operations as follows:
|
Year ended June 30, 2019 (In thousands, except per share amounts)
|
As Reported Under
ASC 606
|
Prior to
Adoption of
ASC 606
|
Effect of Changes
|
||||||||
|
Revenues:
|
|||||||||||
|
Product
|
$
|
3,392,243
|
|
$
|
3,356,837
|
|
$
|
35,406
|
|
||
|
Service
|
1,176,661
|
|
1,029,796
|
|
146,865
|
|
|||||
|
Costs and expenses:
|
|||||||||||
|
Costs of revenues
|
1,869,377
|
|
1,819,060
|
|
50,317
|
|
|||||
|
Other expense (income), net
|
(31,462
|
)
|
(30,989
|
)
|
(473
|
)
|
|||||
|
Provision for income taxes
|
121,214
|
|
101,838
|
|
19,376
|
|
|||||
|
Net income attributable to KLA
|
1,175,617
|
|
1,062,566
|
|
113,051
|
|
|||||
|
Net income per share attributable to KLA
|
|||||||||||
|
Basic
|
$
|
7.53
|
|
$
|
6.81
|
|
$
|
0.72
|
|
||
|
Diluted
|
$
|
7.49
|
|
$
|
6.77
|
|
$
|
0.72
|
|
||
Contract Balances
|
As of
|
As of
|
|||||||||||||
|
(In thousands, except for percentage)
|
June 30, 2019
|
July 1, 2018
|
$ Change
|
% Change
|
||||||||||
|
Accounts receivable, net
|
$
|
990,113
|
|
$
|
635,878
|
|
$
|
354,235
|
|
56
|
%
|
|||
|
Contract assets
|
$
|
94,015
|
|
$
|
14,727
|
|
$
|
79,288
|
|
538
|
%
|
|||
|
Contract liabilities
|
$
|
587,789
|
|
$
|
556,691
|
|
$
|
31,098
|
|
6
|
%
|
|||
Our payment terms and conditions vary by contract type, although terms generally include a requirement of payment of 70% to 90% of total contract consideration within 30 to 60 days of shipment, with the remainder payable within 30 days of acceptance
.
78
The change in contract assets during the fiscal year ended
June 30, 2019
was mainly due to an increase in contract assets of
$76.3 million
from the Orbotech Acquisition in the third quarter of fiscal year 2019 and
$16.8 million
of revenue recognized in excess of the amounts billed to the customers, partially offset by
$14.7 million
of contract assets reclassified to net accounts receivable as our right to consideration for these contract assets became unconditional. Contract assets are included in other current assets on our Consolidated Balance Sheets.
During the fiscal year ended
June 30, 2019
, we recognized revenue of
$461.3 million
that was included in contract liabilities as of
July 1, 2018
. This was partially offset by an increase in contract liabilities of
$43.2 million
from the Orbotech Acquisition in the third quarter of fiscal year 2019, and the value of products and services billed to customers for which control of the products and service has not transferred to the customers. Contract liabilities are included in current and non-current liabilities on our Consolidated Balance Sheets.
Remaining Performance Obligations
As of
June 30, 2019
, we had
$1.84 billion
of remaining performance obligations, which represents our obligation to deliver products and services, and consists primarily of sales orders where written customer requests have been received. We expect to recognize approximately
5%
to
15%
of these performance obligations as revenue beyond the next twelve months, subject to risk of delays, pushouts, and cancellation by the customer, usually with limited or no penalties.
Refer to Note 17 “Segment Reporting and Geographic Information” for information related to revenue by geographic region as well as significant product and service offerings.
Practical expedients
We apply the following practical expedients:
|
•
|
We account for shipping and handling costs as activities to fulfill the promise to transfer the goods, instead of a promised service to our customer.
|
|
•
|
We have elected to not adjust the promised amount of consideration for the effects of a significant financing component as we expect, at contract inception, that the period between when the entity transfers a promised good or service to a customer and when the customer pays for that good or service will generally be one year or less.
|
|
•
|
We have elected to expense costs to obtain a contract as incurred because the expected amortization period is one year or less.
|
|
•
|
We have elected to reflect the aggregate effect of all modifications that occurred before
July 1, 2018
in determining the transaction price, identifying the satisfied and unsatisfied performance obligations, and allocating the transaction price to the performance obligations.
|
NOTE 3 — FAIR VALUE MEASUREMENTS
Our financial assets and liabilities are measured and recorded at fair value, except for our debt and certain equity investments in privately-held companies. Prior to July 1, 2018, the equity investments were generally accounted for under the cost method of accounting and were periodically assessed for other-than-temporary impairment when an event or circumstance indicated that an other-than-temporary decline in value may have occurred. Effective July 1, 2018, equity investments without a readily available fair value are accounted for using the measurement alternative. The measurement alternative is calculated as cost minus impairment, if any, plus or minus changes resulting from observable price changes.
Our non-financial assets, such as goodwill, intangible assets, and land, property and equipment, are assessed for impairment when an event or circumstance indicates that an other-than-temporary decline in value may have occurred.
79
Fair Value of Financial Instruments.
We have evaluated the estimated fair value of financial instruments using available market information and valuations as provided by third-party sources. The use of different market assumptions and/or estimation methodologies could have a significant effect on the estimated fair value amounts. The fair value of our cash equivalents, accounts receivable, accounts payable and other current assets and liabilities approximate their carrying amounts due to the relatively short maturity of these items.
Fair Value Hierarchy.
The authoritative guidance for fair value measurements establishes a fair value hierarchy that prioritizes the inputs to valuation techniques used to measure fair value. The hierarchy gives the highest priority to unadjusted quoted prices in active markets for identical assets or liabilities (Level 1 measurements) and the lowest priority to unobservable inputs (Level 3 measurements). The three levels of the fair value hierarchy are described below:
|
Level 1
|
|
Valuations based on quoted prices in active markets for identical assets or liabilities that the entity has the ability to access.
|
|
Level 2
|
|
Valuations based on quoted prices for similar assets or liabilities, quoted prices in markets that are not active, or other inputs that are observable or can be corroborated by observable data for substantially the full term of the assets or liabilities.
|
|
Level 3
|
|
Valuations based on inputs that are supported by little or no market activity and that are significant to the fair value of the assets or liabilities.
|
A financial instrument’s level within the fair value hierarchy is based on the lowest level of any input that is significant to the fair value measurement.
As of
June 30, 2019
, the types of instruments valued based on quoted market prices in active markets included money market funds, certain U.S. Treasury securities and U.S. Government agency securities. Such instruments are generally classified within Level 1 of the fair value hierarchy.
The types of instruments valued based on other observable inputs included corporate debt securities, sovereign securities, municipal securities, certain U.S. Treasury securities and U.S. Government agency securities. The market inputs used to value these instruments generally consist of market yields, reported trades and broker/dealer quotes. Such instruments are generally classified within Level 2 of the fair value hierarchy.
The principal market in which we execute our foreign currency contracts is the institutional market in an over-the-counter environment with a relatively high level of price transparency. The market participants generally are large financial institutions. Our foreign currency contracts’ valuation inputs are based on quoted prices and quoted pricing intervals from public data sources and do not involve management judgment. These contracts are typically classified within Level 2 of the fair value hierarchy.
The fair value of deferred payments and contingent consideration payable, the majority of which were recorded in connection with business combinations during the fiscal year ended
June 30, 2019
, were classified as Level 3 and estimated using significant inputs that were not observable in the market. See Note 6 “Business Combinations” for additional information.
80
Financial assets (excluding cash held in operating accounts and time deposits) and liabilities measured at fair value on a recurring basis as of the date indicated below were presented on our Consolidated Balance Sheets as follow
|
As of June 30, 2019 (In thousands)
|
Total
|
Quoted Prices
in Active Markets
for Identical
Assets (Level 1)
|
Significant
Other
Observable
Inputs
(Level 2)
|
Little or No
Market Activity Inputs (Level 3)
|
|||||||||||
|
Assets
|
|||||||||||||||
|
Cash equivalents:
|
|||||||||||||||
|
Corporate debt securities
|
$
|
10,988
|
|
$
|
—
|
|
$
|
10,988
|
|
$
|
—
|
|
|||
|
Money market funds and other
|
352,708
|
|
352,708
|
|
—
|
|
—
|
|
|||||||
|
U.S. Government agency securities
|
27,994
|
|
—
|
|
27,994
|
|
—
|
|
|||||||
|
U.S. Treasury securities
|
55,858
|
|
—
|
|
55,858
|
|
—
|
|
|||||||
|
Marketable securities:
|
|||||||||||||||
|
Corporate debt securities
|
422,089
|
|
—
|
|
422,089
|
|
—
|
|
|||||||
|
Municipal securities
|
1,913
|
|
—
|
|
1,913
|
|
|||||||||
|
Sovereign securities
|
5,994
|
|
—
|
|
5,994
|
|
—
|
|
|||||||
|
U.S. Government agency securities
|
131,224
|
|
131,224
|
|
—
|
|
—
|
|
|||||||
|
U.S. Treasury securities
|
151,838
|
|
151,838
|
|
—
|
|
—
|
|
|||||||
|
Total cash equivalents and marketable securities
(1)
|
1,160,606
|
|
635,770
|
|
524,836
|
|
—
|
|
|||||||
|
Other current assets:
|
|||||||||||||||
|
Derivative assets
|
2,557
|
|
—
|
|
2,557
|
|
—
|
|
|||||||
|
Other non-current assets:
|
|||||||||||||||
|
Executive Deferred Savings Plan
|
207,581
|
|
158,021
|
|
49,560
|
|
—
|
|
|||||||
|
Total financial assets
(1)
|
$
|
1,370,744
|
|
$
|
793,791
|
|
$
|
576,953
|
|
$
|
—
|
|
|||
|
Liabilities
|
|||||||||||||||
|
Derivative liabilities
|
$
|
(3,334
|
)
|
$
|
—
|
|
$
|
(3,334
|
)
|
$
|
—
|
|
|||
|
Deferred payments
|
(8,800
|
)
|
—
|
|
—
|
|
(8,800
|
)
|
|||||||
|
Contingent consideration payable
|
(14,005
|
)
|
—
|
|
—
|
|
(14,005
|
)
|
|||||||
|
Total financial liabilities
|
$
|
(26,139
|
)
|
$
|
—
|
|
$
|
(3,334
|
)
|
$
|
(22,805
|
)
|
|||
__________________
|
(1)
|
Excludes cash of
$479.8 million
held in operating accounts and time deposits of
$99.0 million
as of
June 30, 2019
.
|
81
Financial assets (excluding cash held in operating accounts and time deposits) and liabilities measured at fair value on a recurring basis as of the date indicated below were presented on our Consolidated Balance Sheets as follows:
|
As of June 30, 2018 (In thousands)
|
Total
|
Quoted Prices in
Active Markets
for Identical
Assets (Level 1)
|
Significant Other
Observable Inputs
(Level 2)
|
||||||||
|
Assets
|
|||||||||||
|
Cash equivalents:
|
|||||||||||
|
Corporate debt securities
|
$
|
4,995
|
|
$
|
—
|
|
$
|
4,995
|
|
||
|
Money market funds and other
|
863,115
|
|
863,115
|
|
—
|
|
|||||
|
U.S. Government agency securities
|
7,675
|
|
—
|
|
7,675
|
|
|||||
|
U.S. Treasury securities
|
1,996
|
|
—
|
|
1,996
|
|
|||||
|
Marketable securities:
|
|||||||||||
|
Corporate debt securities
|
735,408
|
|
—
|
|
735,408
|
|
|||||
|
Sovereign securities
|
17,142
|
|
—
|
|
17,142
|
|
|||||
|
U.S. Government agency securities
|
316,022
|
|
299,501
|
|
16,521
|
|
|||||
|
U.S. Treasury securities
|
405,654
|
|
364,574
|
|
41,080
|
|
|||||
|
Total cash equivalents and marketable securities
(1)
|
2,352,007
|
|
1,527,190
|
|
824,817
|
|
|||||
|
Other current assets:
|
|||||||||||
|
Derivative assets
|
5,385
|
|
—
|
|
5,385
|
|
|||||
|
Other non-current assets:
|
|||||||||||
|
Executive Deferred Savings Plan
|
197,213
|
|
143,580
|
|
53,633
|
|
|||||
|
Total financial assets
(1)
|
$
|
2,554,605
|
|
$
|
1,670,770
|
|
$
|
883,835
|
|
||
|
Liabilities
|
|||||||||||
|
Derivative liabilities
|
$
|
(6,828
|
)
|
$
|
—
|
|
$
|
(6,828
|
)
|
||
|
Total financial liabilities
|
$
|
(6,828
|
)
|
$
|
—
|
|
$
|
(6,828
|
)
|
||
__________________
|
(1)
|
Excludes cash of
$473.8 million
held in operating accounts and time deposits of
$54.5 million
as of
June 30, 2018
.
|
There were no transfers between Level 1 and Level 2 fair value measurements during the fiscal year ended June 30,
2019
or
2018
. We did not have any assets or liabilities measured at fair value on a recurring basis within Level 3 fair value measurements as of June 30,
2018
. See Note 8 “Debt” for disclosure of the fair value of our Senior Notes.
82
NOTE 4 — FINANCIAL STATEMENT COMPONENTS
Consolidated Balance Sheets
|
|
As of June 30,
|
||||||
|
(In thousands)
|
2019
|
2018
|
|||||
|
Accounts receivable, net:
|
|||||||
|
Accounts receivable, gross
|
$
|
1,002,114
|
|
$
|
663,317
|
|
|
|
Allowance for doubtful accounts
|
(12,001
|
)
|
(11,639
|
)
|
|||
|
$
|
990,113
|
|
$
|
651,678
|
|
||
|
Inventories:
|
|||||||
|
Customer service parts
|
$
|
328,515
|
|
$
|
253,639
|
|
|
|
Raw materials
|
444,627
|
|
331,065
|
|
|||
|
Work-in-process
|
285,191
|
|
280,208
|
|
|||
|
Finished goods
|
204,167
|
|
66,933
|
|
|||
|
$
|
1,262,500
|
|
$
|
931,845
|
|
||
|
Other current assets:
|
|||||||
|
Contract assets
|
$
|
94,015
|
|
$
|
—
|
|
|
|
Deferred costs of revenue
(1)
|
70,721
|
|
—
|
|
|||
|
Prepaid expenses
|
88,387
|
|
47,088
|
|
|||
|
Prepaid income and other taxes
|
51,889
|
|
23,452
|
|
|||
|
Other current assets
|
18,065
|
|
14,619
|
|
|||
|
$
|
323,077
|
|
$
|
85,159
|
|
||
|
Land, property and equipment, net:
|
|||||||
|
Land
|
$
|
67,883
|
|
$
|
40,599
|
|
|
|
Buildings and leasehold improvements
|
402,678
|
|
335,647
|
|
|||
|
Machinery and equipment
|
669,316
|
|
577,077
|
|
|||
|
Office furniture and fixtures
|
28,282
|
|
22,171
|
|
|||
|
Construction-in-process
|
26,029
|
|
9,180
|
|
|||
|
1,194,188
|
|
984,674
|
|
||||
|
Less: accumulated depreciation
|
(745,389
|
)
|
(698,368
|
)
|
|||
|
$
|
448,799
|
|
$
|
286,306
|
|
||
|
Other non-current assets:
|
|||||||
|
Executive Deferred Savings Plan
|
$
|
207,581
|
|
$
|
197,213
|
|
|
|
Other non-current assets
|
58,392
|
|
38,869
|
|
|||
|
$
|
265,973
|
|
$
|
236,082
|
|
||
|
Other current liabilities:
|
|||||||
|
Executive Deferred Savings Plan
|
$
|
208,926
|
|
$
|
199,505
|
|
|
|
Compensation and benefits
|
226,462
|
|
173,774
|
|
|||
|
Other accrued expenses
|
196,177
|
|
123,869
|
|
|||
|
Customer credits and advances
|
133,677
|
|
116,440
|
|
|||
|
Warranty
|
6,470
|
|
42,258
|
|
|||
|
Income taxes payable
|
23,350
|
|
23,287
|
|
|||
|
Interest payable
|
31,992
|
|
16,947
|
|
|||
|
$
|
827,054
|
|
$
|
696,080
|
|
||
|
Other non-current liabilities:
|
|||||||
|
Pension liabilities
|
$
|
79,622
|
|
$
|
66,786
|
|
|
|
Income taxes payable
|
392,266
|
|
371,665
|
|
|||
|
Other non-current liabilities
|
116,009
|
|
54,791
|
|
|||
|
$
|
587,897
|
|
$
|
493,242
|
|
||
83
________________
|
(1)
|
Deferred costs of revenue were previously included under deferred system profit prior to the adoption of ASC 606.
|
Accumulated Other Comprehensive Income (Loss)
The components of accumulated other comprehensive income (loss) (“OCI”) as of the dates indicated below were as follows:
|
(In thousands)
|
Currency Translation Adjustments
|
Unrealized Gains (Losses) on Available-for-Sale Securities
|
Unrealized Gains (Losses) on Cash Flow Hedges
|
Unrealized Gains (Losses) on Defined Benefit Plans
|
Total
|
||||||||||||||
|
Balance as of June 30, 2019
|
$
|
(44,041
|
)
|
$
|
(1,616
|
)
|
$
|
(8,725
|
)
|
$
|
(18,647
|
)
|
$
|
(73,029
|
)
|
||||
|
Balance as of June 30, 2018
|
$
|
(29,974
|
)
|
$
|
(11,032
|
)
|
$
|
1,932
|
|
$
|
(14,859
|
)
|
$
|
(53,933
|
)
|
||||
The effects on net income of amounts reclassified from accumulated OCI to the Consolidated Statements of Operations for the indicated periods were as follows (in thousands):
|
Location in the Consolidated Statements of Operations
|
Year ended June 30,
|
|||||||||
|
Accumulated OCI Components
|
2019
|
2018
|
||||||||
|
Unrealized gains (losses) on cash flow hedges from foreign exchange and interest rate contracts
(1)
|
Revenues
|
$
|
4,329
|
|
$
|
955
|
|
|||
|
Costs of revenues and operating expenses
|
(739
|
)
|
2,137
|
|
||||||
|
Interest expense
|
424
|
|
754
|
|
||||||
|
Other expense (income), net
|
4
|
|
—
|
|
||||||
|
Net gains reclassified from accumulated OCI
|
$
|
4,018
|
|
$
|
3,846
|
|
||||
|
Unrealized gains (losses) on available-for-sale securities
|
Other expense (income), net
|
$
|
(1,294
|
)
|
$
|
(209
|
)
|
|||
________________
|
(1)
|
Reflects the adoption of the new accounting guidance for hedge accounting in the second quarter of fiscal year 2019. For additional details, refer to Note 16, “Derivative Instruments and Hedging Activities.”
|
The amounts reclassified out of accumulated OCI related to our defined benefit pension plans, which were recognized as a component of net periodic cost for the fiscal years ended
June 30, 2019
and
2018
were
$1.1 million
and
$1.8 million
, respectively. For additional details, refer to Note 12, “Employee Benefit Plans.”
Consolidated Statements of Operations
The following table shows other expense (income), net for the indicated periods:
|
|
Year ended June 30,
|
||||||||||
|
(In thousands)
|
2019
|
2018
|
2017
|
||||||||
|
Other expense (income), net:
|
|||||||||||
|
Interest income
|
$
|
(40,367
|
)
|
$
|
(36,869
|
)
|
$
|
(23,270
|
)
|
||
|
Foreign exchange (gains) losses, net
|
(322
|
)
|
708
|
|
641
|
|
|||||
|
Net realized losses (gains) on sale of investments
|
1,294
|
|
209
|
|
(191
|
)
|
|||||
|
Other
|
7,933
|
|
5,470
|
|
5,998
|
|
|||||
|
$
|
(31,462
|
)
|
$
|
(30,482
|
)
|
$
|
(16,822
|
)
|
|||
84
NOTE 5 — MARKETABLE SECURITIES
The amortized cost and fair value of marketable securities as of the dates indicated below were as follows:
|
As of June 30, 2019 (In thousands)
|
Amortized
Cost
|
Gross
Unrealized
Gains
|
Gross
Unrealized
Losses
|
Fair Value
|
|||||||||||
|
Corporate debt securities
|
$
|
433,518
|
|
$
|
141
|
|
$
|
(582
|
)
|
$
|
433,077
|
|
|||
|
Money market funds and other
|
352,708
|
|
—
|
|
—
|
|
352,708
|
|
|||||||
|
Municipal securities
|
1,910
|
|
3
|
|
—
|
|
1,913
|
|
|||||||
|
Sovereign securities
|
6,001
|
|
1
|
|
(8
|
)
|
5,994
|
|
|||||||
|
U.S. Government agency securities
|
159,454
|
|
5
|
|
(241
|
)
|
159,218
|
|
|||||||
|
U.S. Treasury securities
|
208,058
|
|
39
|
|
(401
|
)
|
207,696
|
|
|||||||
|
Subtotal
|
1,161,649
|
|
189
|
|
(1,232
|
)
|
1,160,606
|
|
|||||||
|
Add: Time deposits
(1)
|
99,006
|
|
—
|
|
—
|
|
99,006
|
|
|||||||
|
Less: Cash equivalents
|
536,206
|
|
17
|
|
(2
|
)
|
536,221
|
|
|||||||
|
Marketable securities
|
$
|
724,449
|
|
$
|
172
|
|
$
|
(1,230
|
)
|
$
|
723,391
|
|
|||
|
As of June 30, 2018 (In thousands)
|
Amortized
Cost
|
Gross
Unrealized
Gains
|
Gross
Unrealized
Losses
|
Fair Value
|
|||||||||||
|
Corporate debt securities
|
$
|
747,763
|
|
$
|
148
|
|
$
|
(7,508
|
)
|
$
|
740,403
|
|
|||
|
Money market funds and other
|
863,115
|
|
—
|
|
—
|
|
863,115
|
|
|||||||
|
Sovereign securities
|
17,293
|
|
—
|
|
(151
|
)
|
17,142
|
|
|||||||
|
U.S. Government agency securities
|
326,508
|
|
16
|
|
(2,827
|
)
|
323,697
|
|
|||||||
|
U.S. Treasury securities
|
411,329
|
|
3
|
|
(3,682
|
)
|
407,650
|
|
|||||||
|
Subtotal
|
2,366,008
|
|
167
|
|
(14,168
|
)
|
2,352,007
|
|
|||||||
|
Add: Time deposits
(1)
|
54,537
|
|
—
|
|
—
|
|
54,537
|
|
|||||||
|
Less: Cash equivalents
|
930,608
|
|
—
|
|
—
|
|
930,608
|
|
|||||||
|
Marketable securities
|
$
|
1,489,937
|
|
$
|
167
|
|
$
|
(14,168
|
)
|
$
|
1,475,936
|
|
|||
__________________
|
(1)
|
Time deposits excluded from fair value measurements.
|
Our investment portfolio consists of both corporate and government securities that have a maximum maturity of
three years
. The longer the duration of these securities, the more susceptible they are to changes in market interest rates and bond yields. As yields increase, those securities with a lower yield-at-cost show a mark-to-market unrealized loss. Most of our unrealized losses are due to changes in market interest rates, and bond yields. We believe that we have the ability to realize the full value of all of these investments upon maturity. As of
June 30, 2019
, we had
246
investments in an unrealized loss position. The following table summarizes the fair value and gross unrealized losses of our investments that were in an unrealized loss position as of the date indicated below, the majority of which were in a continuous loss position for 12 months or more:
|
As of June 30, 2019 (In thousands)
|
Fair Value
|
Gross
Unrealized
Losses
|
|||||
|
Corporate debt securities
|
$
|
321,972
|
|
$
|
(580
|
)
|
|
|
Sovereign securities
|
1,999
|
|
(8
|
)
|
|||
|
U.S. Government agency securities
|
126,694
|
|
(241
|
)
|
|||
|
U.S. Treasury securities
|
142,796
|
|
(401
|
)
|
|||
|
Total
|
$
|
593,461
|
|
$
|
(1,230
|
)
|
|
85
The contractual maturities of securities classified as available-for-sale, regardless of their classification on our Consolidated Balance Sheets, as of the date indicated below were as follows:
|
As of June 30, 2019 (In thousands)
|
Amortized
Cost
|
Fair Value
|
|||||
|
Due within one year
|
$
|
554,039
|
|
$
|
553,048
|
|
|
|
Due after one year through three years
|
170,410
|
|
170,343
|
|
|||
|
$
|
724,449
|
|
$
|
723,391
|
|
||
Actual maturities may differ from contractual maturities because borrowers may have the right to call or prepay obligations with or without call or prepayment penalties. Realized gains on available for sale securities were immaterial for the fiscal years ended June 30,
2019
,
2018
and
2017
. Realized losses on available for sale securities were
$1.4 million
for the fiscal year ended June 30, 2019 and were immaterial for the fiscal years ended June 30, 2018 and 2017.
NOTE 6 - BUSINESS COMBINATIONS
Orbotech Acquisition
On February 20, 2019, we completed the acquisition of Orbotech for total purchase consideration of approximately
$3.26
billion which was paid in part by cash of
$1.90 billion
, in part by KLA common stock with a fair value of
$1.32 billion
and the balance by the assumption of stock options and RSUs. Orbotech is a global supplier of yield-enhancing and process-enabling solutions for the manufacture of electronics products. KLA acquired Orbotech to extend and enhance its portfolio of products to address market opportunities in the printed circuit board, flat panel display, advanced packaging and semiconductor manufacturing areas.
Preliminary Purchase Price Allocation
The aggregate purchase consideration has been preliminarily allocated as follows (in thousands):
|
Purchase Price
|
|||
|
Cash for outstanding Orbotech shares
(1)
|
$
|
1,901,948
|
|
|
Fair value of KLA common stock issued for outstanding Orbotech shares
(2)
|
1,324,657
|
|
|
|
Cash for Orbotech equity awards
(3)
|
9,543
|
|
|
|
Fair value of KLA common stock issued to settle Orbotech equity awards
(4)
|
6,129
|
|
|
|
Stock options and RSUs assumed
(5)
|
13,281
|
|
|
|
Total purchase consideration
|
3,255,558
|
|
|
|
Less: cash acquired
|
(215,640
|
)
|
|
|
Total purchase consideration, net of cash acquired
|
$
|
3,039,918
|
|
|
Allocation
|
|||
|
Accounts receivable, net
|
$
|
200,517
|
|
|
Inventories
|
329,491
|
|
|
|
Contract assets
|
63,181
|
|
|
|
Other current assets
|
73,557
|
|
|
|
Property, plant and equipment
|
102,086
|
|
|
|
Goodwill
|
1,811,760
|
|
|
|
Intangible assets
|
1,553,570
|
|
|
|
Other non-current assets
|
73,179
|
|
|
|
Accounts payable
|
(53,015
|
)
|
|
|
Accrued liabilities
|
(179,624
|
)
|
|
|
Other current liabilities
(6)
|
(69,860
|
)
|
|
|
Deferred tax liabilities
(7)
|
(777,838
|
)
|
|
|
Other non-current liabilities
(6)
|
(67,901
|
)
|
|
|
Non-controlling interest
|
(19,185
|
)
|
|
|
$
|
3,039,918
|
|
|
86
________________
|
(1)
|
Represents the total cash paid to settle
48.9 million
outstanding Orbotech shares as of February 20, 2019 at
$38.86
per Orbotech share.
|
|
(2)
|
Represents the fair value of
12.2 million
shares of our common stock issued to settle
48.9 million
outstanding Orbotech shares. KLA issued
0.25
shares for each Orbotech share. The fair value of KLA’s common stock was
$108.26
per share on the Acquisition Date.
|
|
(3)
|
Represents primarily cash consideration for the settlement of the vested stock options and restricted stock units for which services were rendered by the employees of Orbotech prior to the closing, and a small portion for the settlement of fractional shares.
|
|
(4)
|
Represents the fair value of share of
56,614
shares of KLA common stock issued to settle the vested Orbotech stock options. The fair value of KLA’s common stock was
$108.26
per share on the Acquisition Date.
|
|
(5)
|
Represents the fair value of the assumed stock options and RSUs to the extent those related to services provided by the employee of Orbotech prior to closing. Also refer to Note 9, “Equity, Long-Term Incentive Compensation Plans and Non-Controlling Interest” for additional information about assumed stock options and RSUs.
|
|
(6)
|
On December 24, 2018, Orbotech, as part of its strategy to invest in the high growth area of the software business within the Printed Circuit Boards (“PCB”) industry, acquired the remaining
50%
shares of Frontline, which was prior to that accounted as an equity investee, from Mentor Graphics Development Services (Israel) Ltd. Orbotech acquired all of the joint venture interests it did not previously own for
$85.0 million
in cash on hand and agreed to pay an additional
$10.0 million
in cash over four years plus a cash earn-out of not less than
$5.0 million
and up to
$20.0 million
. The earn out amounts are based on revenues from a Frontline product currently under development. As of both February 20, 2019 and June 30, 2019, the estimated fair market values of the
four
-year cash payment was
$8.8 million
and the earn-out was
$7.1 million
. As of both February 20, 2019 and June 30, 2019, these amounts have been included in current and non-current liabilities at
$4.3 million
and
$11.6 million
, respectively.
|
|
(7)
|
Primarily related to tax impact on the future amortization of intangible assets acquired and inventory fair value adjustments.
|
During the fourth quarter of the fiscal year ended June 30, 2019, we recorded measurement period adjustments to reflect facts and circumstances in existence as of the Acquisition Date. These adjustments primarily related to the valuation of acquired intangible assets of
$75.5 million
, trade accounts receivable of
$21.5 million
, non-controlling interest of
$17.4 million
, other immaterial adjustments of
$6.1 million
, and related impacts on the deferred income tax liabilities of
$47.5 million
with resulting to corresponding increase to goodwill of
$38.2 million
.
KLA allocated the purchase price to tangible and identified intangible assets acquired and liabilities assumed based on the preliminary estimates
of
their estimated fair values, which were determined using generally accepted valuation techniques based on estimates and assumptions made by management at the time of the Orbotech Acquisition and are subject to change during the measurement period which is not expected to exceed one year. The primary tasks that are required to be completed include discovery and the remeasurement of unknown uncertain tax positions that existed at the acquisition date, adjustments to the deferred tax liabilities for unremitted earnings, validation of synergies expected to be derived from the acquisition of Orbotech, recoverability of certain acquired assets and reallocation of certain acquired intangible assets between jurisdictions based on the outcome of ongoing tax audits, including any related tax impacts. Any adjustments to our preliminary purchase price allocation identified during the measurement period will be recognized in the period in which the adjustments are determined and recorded against goodwill.
The operating results of Orbotech have been included in our Consolidated Financial Statements for the fiscal year ended
June 30, 2019
from the Acquisition Date. The goodwill was primarily attributable to the assembled workforce of Orbotech, planned growth in new markets and synergies expected to be achieved from the combined operations of KLA and Orbotech.
None
of the goodwill is deductible for income tax purposes. Goodwill arising from the Orbotech Acquisition has been allocated to the Specialty Semiconductor Process; and the PCB and Display reporting units during the fiscal year ended
June 30, 2019
. For additional details, refer to Note 7 “Goodwill and Purchased Intangible Assets.”
87
Intangible Assets
The estimated fair value and weighted average useful life of the Orbotech intangible assets are as follows:
|
(In thousands)
|
Fair Value
|
Weighted Average Useful Lives
|
|||
|
Existing technology
(1)
|
$
|
1,008,000
|
|
8
|
|
|
Customer-related assets
(2)
|
227,000
|
|
8
|
||
|
Backlog
(3)
|
37,500
|
|
1
|
||
|
Trade name
(4)
|
91,500
|
|
7
|
||
|
Off market leases
(5)
|
2,070
|
|
7
|
||
|
Total identified finite-lived intangible assets
|
1,366,070
|
|
|||
|
In-process research and development
(6)
|
187,500
|
|
N/A
|
||
|
Total identified intangible assets
|
$
|
1,553,570
|
|
||
________________
|
(1)
|
Existing technology was identified from the products of Orbotech and its fair value was determined using the Relief-from-Royalty Method under the income approach, which estimates the cost savings generated by a company related to the ownership of an asset for which it would otherwise have had to pay royalties or license fees on revenues earned through the use of the asset. The discount rate used was determined at the time of measurement based on an analysis of the implied internal rate of return of the transaction, weighted average cost of capital and weighted average return on assets. The economic useful life was determined based on the technology cycle related to each developed technology, as well as the cash flows over the forecast period.
|
|
(2)
|
Customer contracts and related relationships represent the fair value of the existing relationships with the Orbotech customers and its fair value was determined using the Multi-Period Excess Earning Method which involves isolating the net earnings attributable to the asset being measured based on present value of the incremental after-tax cash flows (excess earnings) attributable solely to the intangible asset over its remaining useful life. The economic useful life was determined based on historical customer attrition rates.
|
|
(3)
|
Backlog primarily relates to the dollar value of purchase arrangements with customers, effective, as of a given point in time, that are based on mutually agreed terms which, in some cases, may still be subject to completion of written documentation and may be changed or cancelled by the customer, often without penalty. Orbotech’s backlog consists of these arrangements with assigned shipment dates expected, in most cases, within three to twelve months. The fair value was determined using the Multi-Period Excess Earning Method. The economic useful life is based on the time to fulfill the outstanding order backlog obligation.
|
|
(4)
|
Trade name primarily relates to the “Orbotech” trade name. The fair value was determined by applying the Relief-From-Royalty method under the income approach. The economic useful life was determined based on the expected life of the trade name.
|
|
(5)
|
The favorable/unfavorable components of the acquired leases were determined using the Income Approach which involves present valuing the difference in future cash flows between the contracted lease payments and the rent payable to a market participant over the lease terms. The economic useful life is based on the remaining lease term.
|
|
(6)
|
The fair value of in-process research and development (“IPR&D”) was determined using the relief-from-royalty method under the income approach, which estimates the cost savings generated by a company related to the ownership of an asset for which it would otherwise have had to pay royalties or license fees on revenues earned through the use of the asset.
|
We believe the amounts of purchased intangible assets recorded above represent the fair values of and approximate the amounts a market participant would pay for, these intangible assets as of the acquisition date.
Our Consolidated Statements of Operations for the fiscal year ended
June 30, 2019
included revenue of
$388.9 million
and a net loss of
$61.6 million
from Orbotech.
Other Fiscal 2019 Acquisitions
During the three months ended
March 31, 2019
, we acquired
three
privately-held companies primarily to expand our products and services offerings for an aggregate purchase price of
$118.3 million
, including a post-closing working capital adjustment, and the fair value of the promise to pay additional consideration of up to
$13.0 million
contingent on the achievement of certain milestones. As of
June 30, 2019
, the estimated fair value of the additional consideration was
$5.1 million
, which is classified as a current liability on the Consolidated Balance Sheets.
88
During the three months ended
September 30, 2018
we acquired
two
privately-held companies for an aggregate purchase price of
$15.4 million
, including the fair value of the promise to pay total additional consideration of up to
$6.0 million
contingent on the achievement of certain milestones. As of
June 30, 2019
, the estimated fair value of the additional consideration was
$1.8 million
, which is classified as a current liability on the Consolidated Balance Sheets.
None of these acquisitions were individually material to our Consolidated Financial Statements.
The aggregate purchase price of the other fiscal 2019 acquisitions was allocated on a preliminary basis as follows:
|
(In thousands)
|
Fair Value
|
||
|
Net tangible assets (including Cash and cash equivalents of $2.6 million)
|
$
|
13,214
|
|
|
Identifiable intangible assets
|
75,130
|
|
|
|
Goodwill
|
45,380
|
|
|
|
Total
|
$
|
133,724
|
|
The goodwill was primarily attributable to the assembled workforce, and planned growth in new markets. A portion of the goodwill is deductible for income tax purposes. Our Consolidated Statements of Operations for the fiscal year ended
June 30, 2019
included revenues of
$9.7 million
, respectively, and net losses of
$3.5 million
from these privately-held companies.
KLA, in the aggregate for the Orbotech and other fiscal 2019 acquisitions, incurred approximately
$40.2 million
of acquisition-related costs, which are primarily included within selling, general and administrative expenses in our Consolidated Statements of Operations.
Fiscal 2018 Acquisition
In the fiscal year ended
June 30, 2018
, we acquired a product line from Keysight Technologies, Inc., a related party, for a total purchase consideration of
$12.1 million
, of which
$5.2 million
was allocated to goodwill based on the fair value at the acquisition date. Goodwill recognized was deductible for income tax purposes. See Note 18 “Related Party Transactions” for additional details.
Supplemental Unaudited Pro Forma Information:
The following unaudited pro forma financial information summarizes the combined results of operations for KLA, Orbotech, and the three acquisitions completed in the third quarter of fiscal 2019 as if the companies were combined as of the beginning of fiscal 2018. The unaudited pro forma information includes adjustments to amortization and depreciation for intangible assets and property, plant and equipment acquired, adjustments to stock-based compensation expense, the purchase accounting effect on inventory acquired, the purchase accounting effect on deferred revenue, interest expense and amortization of debt issuance costs associated with the Senior Notes financing, and transaction costs.
The table below reflects the impact of material and nonrecurring adjustments to the unaudited pro forma results for the fiscal year ended
June 30, 2019
and
2018
that are directly attributable to the acquisitions:
|
Year ended June 30,
|
|||||||
|
Non-recurring Adjustments
(In thousands)
|
2019
|
2018
|
|||||
|
Decrease to revenue as a result of deferred revenue fair value adjustment
|
$
|
—
|
|
$
|
5,349
|
|
|
|
Increase to expense as a result of inventory fair value adjustment
|
$
|
1,029
|
|
$
|
85,778
|
|
|
|
(Decrease)/increase to expense as a result of transaction costs
|
$
|
(64,343
|
)
|
$
|
64,343
|
|
|
|
Increase to expense as a result of compensation costs
|
$
|
7,201
|
|
$
|
39,888
|
|
|
The unaudited pro forma information presented below is for informational purposes only and is not necessarily indicative of our consolidated results of operations of the combined business had the acquisitions actually occurred at the beginning of fiscal year 2018 or of the results of our future operations of the combined businesses.
89
|
Pro Forma
|
|||||||
|
Year ended June 30,
|
|||||||
|
(In thousands)
|
2019
|
2018
|
|||||
|
Revenues
|
$
|
5,154,823
|
|
$
|
5,079,654
|
|
|
|
Net income attributable to KLA
|
$
|
1,288,467
|
|
$
|
608,542
|
|
|
We have not included pro forma results of operations for the acquisition of privately-held companies completed in the first quarter of fiscal 2019 herein as they were not material to us on either an individual or in aggregate. We included the results of operations of each acquisition in our Consolidated Statements of Operations from the date of each acquisition.
NOTE 7 — GOODWILL AND PURCHASED INTANGIBLE ASSETS
Goodwill
Goodwill represents the excess of the purchase price over the fair value of the net tangible and identifiable intangible assets acquired in the current and prior business combinations. Following the update of the organizational structure during the fiscal year 2019, as described in Note 17, “Segment Reporting and Geographic Information”, we have
four
reportable segments and
six
reporting units. To reflect our new segment structure, goodwill arising from the Orbotech Acquisition has been allocated to the Specialty Semiconductor Process; and the PCB and Display reporting units using an acquisition accounting method. The following table presents goodwill carrying value and the movements during the fiscal years ended
June 30, 2019
and
2018
(1)
:
|
(In thousands)
|
Wafer Inspection
|
Patterning
|
GSS
|
SPC Others
|
Wafer Inspection and Patterning
|
Specialty Semiconductor Process
|
PCB and Display
|
Component Inspection
|
Total
|
|||||||||||||||||||||||||||
|
Balance as of June 30, 2017
|
$
|
281,095
|
|
$
|
53,255
|
|
$
|
2,856
|
|
$
|
12,320
|
|
$
|
—
|
|
$
|
—
|
|
$
|
—
|
|
$
|
—
|
|
$
|
349,526
|
|
|||||||||
|
Acquired goodwill
|
—
|
|
—
|
|
5,163
|
|
—
|
|
—
|
|
—
|
|
—
|
|
—
|
|
5,163
|
|
||||||||||||||||||
|
Foreign currency adjustment
|
(90
|
)
|
—
|
|
20
|
|
79
|
|
—
|
|
—
|
|
—
|
|
—
|
|
9
|
|
||||||||||||||||||
|
Balance as of June 30, 2018
|
281,005
|
|
53,255
|
|
8,039
|
|
12,399
|
|
—
|
|
—
|
|
—
|
|
—
|
|
354,698
|
|
||||||||||||||||||
|
Acquired goodwill
|
—
|
|
26,362
|
|
17,869
|
|
1,176
|
|
—
|
|
821,842
|
|
989,918
|
|
—
|
|
1,857,167
|
|
||||||||||||||||||
|
Reallocation due to change in segments
|
(281,005
|
)
|
(79,617
|
)
|
—
|
|
(13,575
|
)
|
360,622
|
|
—
|
|
—
|
|
13,575
|
|
—
|
|
||||||||||||||||||
|
Foreign currency and other adjustments
|
|
—
|
|
—
|
|
—
|
|
(7
|
)
|
—
|
|
—
|
|
—
|
|
(7
|
)
|
|||||||||||||||||||
|
Balance as of June 30, 2019
|
$
|
—
|
|
$
|
—
|
|
$
|
25,908
|
|
$
|
—
|
|
$
|
360,615
|
|
$
|
821,842
|
|
$
|
989,918
|
|
$
|
13,575
|
|
$
|
2,211,858
|
|
|||||||||
_________________
|
(1)
|
No
goodwill was assigned to the Other reporting unit, and accordingly not disclosed in the table above.
|
Goodwill is net of accumulated impairment losses of
$277.6 million
, which were recorded prior to the fiscal year ended June 30, 2014. As of June 30, 2019, all of accumulated impairment losses were included in the Wafer Inspection and Patterning reporting unit. As of June 30, 2018 and 2017, approximately
$1.0 million
and
$276.6 million
of accumulated impairment losses were included in the Wafer Inspection reporting unit and the Patterning reporting unit, respectively.
The change in goodwill during the fiscal year ended
June 30, 2019
is due to
$1.81 billion
related to the acquisition of Orbotech and
$45.4 million
related to the acquisition of the privately-held companies during the period. For additional details, refer to Note 6 “Business Combinations”.
We performed a qualitative assessment of the goodwill for our reporting units during the three months ended
March 31, 2019
. Based on this assessment we concluded that it was more likely than not that the fair value of each of the reporting units exceeded its carrying amount. As a result of our determination based on our qualitative assessment, it was not necessary to perform the quantitative goodwill impairment test at this time. In assessing the qualitative factors, we considered the impact of key factors, including changes in the industry and competitive environment, market capitalization, stock price, earnings multiples, budgeted-to-actual revenue performance from prior year, gross margin and cash flows from operating activities. In addition, subsequent to the update of the organizational structure, we performed a qualitative assessment of the goodwill for our reporting units, which were impacted by the organizational change, and concluded that there were no impairment indicators identified.
90
Based on our assessment, goodwill in the reporting units was not impaired as of
June 30, 2019
and
2018
. The next annual assessment of goodwill by reporting unit is scheduled to be performed in the third quarter of the fiscal year ending June 30,
2020
.
Purchased Intangible Assets
The components of purchased intangible assets as of the dates indicated below were as follows:
|
(In thousands)
|
As of June 30, 2019
|
As of June 30, 2018
|
|||||||||||||||||||||||
|
Category
|
Range of
Useful Lives (in years) |
Gross
Carrying
Amount
|
Accumulated
Amortization and Impairment
|
Net
Amount
|
Gross
Carrying
Amount
|
Accumulated
Amortization and Impairment
|
Net
Amount
|
||||||||||||||||||
|
Existing technology
|
4-8
|
$
|
1,224,629
|
|
$
|
196,582
|
|
$
|
1,028,047
|
|
$
|
160,859
|
|
$
|
144,202
|
|
$
|
16,657
|
|
||||||
|
Trade name/trademark
|
4-7
|
114,573
|
|
25,052
|
|
89,521
|
|
20,993
|
|
20,060
|
|
933
|
|
||||||||||||
|
Customer relationships
|
4-9
|
297,250
|
|
66,471
|
|
230,779
|
|
56,680
|
|
55,136
|
|
1,544
|
|
||||||||||||
|
Backlog and other
|
<1- 9
|
43,969
|
|
19,146
|
|
24,823
|
|
660
|
|
461
|
|
199
|
|
||||||||||||
|
Intangible assets subject to amortization
|
1,680,421
|
|
307,251
|
|
1,373,170
|
|
239,192
|
|
219,859
|
|
19,333
|
|
|||||||||||||
|
In-process research and development
|
187,500
|
|
—
|
|
187,500
|
|
—
|
|
—
|
|
—
|
|
|||||||||||||
|
Total
|
$
|
1,867,921
|
|
$
|
307,251
|
|
$
|
1,560,670
|
|
$
|
239,192
|
|
$
|
219,859
|
|
$
|
19,333
|
|
|||||||
Purchased intangible assets are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset or asset group may not be recoverable. The change in the gross carrying amounts of intangible assets is due to the acquisition of Orbotech and other privately-held companies. For additional details, refer to Note 6 “Business Combinations.”
Amortization expense for purchased intangible assets for the periods indicated below was as follows:
|
Year ended June 30,
|
|||||||
|
(In thousands)
|
2019
|
2018
|
|||||
|
Amortization expense- Cost of revenues
|
$
|
52,387
|
|
$
|
4,095
|
|
|
|
Amortization expense- Selling, general and administrative
|
34,992
|
|
535
|
|
|||
|
Amortization expense- Research and development
|
13
|
|
—
|
|
|||
|
Total
|
$
|
87,392
|
|
$
|
4,630
|
|
|
Based on the purchased intangible assets gross carrying amount recorded as of
June 30, 2019
, the underlying assets, the remaining estimated annual amortization expense is expected to be as follows:
|
Fiscal year ending June 30:
|
Amortization
(In thousands)
|
||
|
2020
|
$
|
206,293
|
|
|
2021
|
186,609
|
|
|
|
2022
|
185,159
|
|
|
|
2023
|
184,060
|
|
|
|
2024
|
182,113
|
|
|
|
Thereafter
|
428,936
|
|
|
|
Total
|
$
|
1,373,170
|
|
91
NOTE 8 — DEBT
The following table summarizes our debt as of
June 30, 2019
and
June 30, 2018
:
|
As of June 30, 2019
|
As of June 30, 2018
|
||||||||||||
|
Amount
(In thousands)
|
Effective
Interest Rate
|
Amount
(In thousands) |
Effective
Interest Rate
|
||||||||||
|
Fixed-rate 3.375% Senior Notes due on November 1, 2019
|
250,000
|
|
3.377
|
%
|
250,000
|
|
3.377
|
%
|
|||||
|
Fixed-rate 4.125% Senior Notes due on November 1, 2021
|
500,000
|
|
4.128
|
%
|
500,000
|
|
4.128
|
%
|
|||||
|
Fixed-rate 4.650% Senior Notes due on November 1, 2024
|
1,250,000
|
|
4.682
|
%
|
1,250,000
|
|
4.682
|
%
|
|||||
|
Fixed-rate 5.650% Senior Notes due on November 1, 2034
|
250,000
|
|
5.670
|
%
|
250,000
|
|
5.670
|
%
|
|||||
|
Fixed-rate 4.100% Senior Notes due on March 15, 2029
|
800,000
|
|
4.159
|
%
|
—
|
|
—
|
%
|
|||||
|
Fixed-rate 5.000% Senior Notes due on March 15, 2049
|
400,000
|
|
5.047
|
%
|
—
|
|
—
|
%
|
|||||
|
Total
|
3,450,000
|
|
2,250,000
|
|
|||||||||
|
Unamortized discount
|
(8,738
|
)
|
(2,523
|
)
|
|||||||||
|
Unamortized debt issuance costs
|
(17,880
|
)
|
(10,075
|
)
|
|||||||||
|
Total
|
$
|
3,423,382
|
|
$
|
2,237,402
|
|
|||||||
|
Reported as:
|
|||||||||||||
|
Current portion of long-term debt
|
$
|
249,999
|
|
$
|
—
|
|
|||||||
|
Long-term debt
|
3,173,383
|
|
2,237,402
|
|
|||||||||
|
Total
|
$
|
3,423,382
|
|
$
|
2,237,402
|
|
|||||||
As of
June 30, 2019
, future principal payments for the long-term debt are
$250.0 million
in fiscal year 2020;
$500.0 million
in fiscal year 2022; and
$2.70 billion
after fiscal year 2023.
Senior Notes:
In March 2019 and November 2014, we issued
$1.20 billion
and
$2.50 billion
, respectively (each, a “2019 Senior Notes”, a “2014 Senior Notes”, and collectively the “Senior Notes”), aggregate principal amount of senior, unsecured long-term notes.
The interest rate specified for each series of the 2014 Senior Notes will be subject to adjustments from time to time if Moody’s Investor Service, Inc. (“Moody’s”) or Standard & Poor’s Ratings Services (“S&P”) or, under certain circumstances, a substitute rating agency selected by us as a replacement for Moody’s or S&P, as the case may be (a “Substitute Rating Agency”), downgrades (or subsequently upgrades) its rating assigned to the respective series of the 2014 Senior Notes such that the adjusted rating is below investment grade. If the adjusted rating of any series of the 2014 Senior Notes from Moody’s (or, if applicable, any Substitute Rating Agency) is decreased to Ba1, Ba2, Ba3 or B1 or below, the stated interest rate on such series of the 2014 Senior Notes as noted above will increase by
25 bps
,
50 bps
,
75 bps
or
100 bps
, respectively (“bps” refers to Basis Points and 1% is equal to 100 bps). If the rating of any series of the 2014 Senior Notes from S&P (or, if applicable, any Substitute Rating Agency) with respect to such series of the 2014 Senior Notes is decreased to BB+, BB, BB- or B+ or below, the stated interest rate on such series of the 2014 Senior Notes as noted above will increase by
25 bps
,
50 bps
,
75 bps
or
100 bps
, respectively. The interest rates on any series of the 2014 Senior Notes will permanently cease to be subject to any adjustment (notwithstanding any subsequent decrease in the ratings by any of Moody’s, S&P and, if applicable, any Substitute Rating Agency) if such series of the 2014 Senior Notes becomes rated “Baa1” (or its equivalent) or higher by Moody’s (or, if applicable, any Substitute Rating Agency) and “BBB+” (or its equivalent) or higher by S&P (or, if applicable, any Substitute Rating Agency), or one of those ratings if rated by only one of Moody’s, S&P and, if applicable, any Substitute Rating Agency, in each case with a stable or positive outlook. Unlike the 2014 Senior Notes, the interest rate for each series of the 2019 Senior Notes will not be subject to such adjustments.
During the
three months ended June 30, 2018
, we entered into a series of forward contracts (the “2018 Rate Lock Agreements”) to lock the benchmark interest rate with notional amount of
$500.0 million
in aggregate. In October 2014, we entered into a series of forward contracts to lock the 10-year treasury rate (“benchmark rate”) on a portion of the 2014 Senior Notes with a notional amount of
$1.00 billion
in aggregate. For additional details on the forward contracts, refer to Note 17, “Derivative Instruments and Hedging Activities.”
92
The original discounts on the 2019 Senior Notes and the 2014 Senior Notes amounted to
$6.7 million
and
$4.0 million
, respectively, and are being amortized over the life of the debt. Interest is payable semi-annually on May 1 and November 1 of each year for the 2014 Senior Notes and semi-annually on March 15 and September 15 of each year for the 2019 Senior Notes. The indenture for the Senior Notes (the “Indenture”) includes covenants that limit our ability to grant liens on our facilities and enter into sale and leaseback transactions, subject to certain allowances under which certain sale and leaseback transactions are not restricted.
In certain circumstances involving a change of control followed by a downgrade of the rating of a series of Senior Notes by at least two of Moody’s, S&P and Fitch Inc., unless we have exercised our rights to redeem the Senior Notes of such series, we will be required to make an offer to repurchase all or, at the holder’s option, any part, of each holder’s Senior Notes of that series pursuant to the offer described below (the “Change of Control Offer”). In the Change of Control Offer, we will be required to offer payment in cash equal to
101%
of the aggregate principal amount of Senior Notes repurchased plus accrued and unpaid interest, if any, on the Senior Notes repurchased, up to, but not including, the date of repurchase.
Based on the trading prices of the Senior Notes on the applicable dates, the fair value of the Senior Notes as of
June 30, 2019
and
June 30, 2018
was approximately
$3.70 billion
and
$2.33 billion
, respectively. While the Senior Notes are recorded at cost, the fair value of the long-term debt was determined based on quoted prices in markets that are not active; accordingly, the long-term debt is categorized as Level 2 for purposes of the fair value measurement hierarchy.
As of
June 30, 2019
, we were in compliance with all of our covenants under the Indenture associated with the Senior Notes.
Revolving Credit Facility:
In November 2017, we entered into a Credit Agreement (the “Credit Agreement”) providing for a
$750.0 million
five
-year unsecured Revolving Credit Facility (the “Revolving Credit Facility”), which replaced our prior Credit Facility. Subject to the terms of the Credit Agreement, the Revolving Credit Facility may be increased in an amount up to
$250.0 million
in the aggregate. In November 2018, we entered into an Incremental Facility, Extension and Amendment Agreement (the “Amendment”), which amends the Credit Agreement to (a) extend the Maturity Date (the “Maturity Date”) from November 30, 2022 to November 30, 2023, (b) increase the total commitment by
$250.0 million
and (c) effect certain other amendments to the Credit Agreement as set forth in the Amendment. After giving effect to the Amendment, the total commitments under the Credit Agreement are
$1.00 billion
. During the third quarter of the fiscal year ended June 30, 2019, we made borrowings of
$900.0 million
from the Revolving Credit Facility, which were paid in full in the same quarter. As of
June 30, 2019
, we had
no
outstanding borrowings under the Revolving Credit Facility.
We may borrow, repay and reborrow funds under the Revolving Credit Facility until the Maturity Date, at which time such Revolving Credit Facility will terminate, and all outstanding loans under such facility, together with all accrued and unpaid interest, must be repaid. We may prepay outstanding borrowings under the Revolving Credit Facility at any time without a prepayment penalty.
Borrowings under the Revolving Credit Facility will bear interest, at our option, at either: (i) the Alternative Base Rate (“ABR”) plus a spread, which ranges from
0 bps
to
75 bps
, or (ii) the London Interbank Offered Rate (“LIBOR”) plus a spread, which ranges from
100 bps
to
175 bps
. The spreads under ABR and LIBOR are subject to adjustment in conjunction with credit rating downgrades or upgrades. We are also obligated to pay an annual commitment fee on the daily undrawn balance of the Revolving Credit Facility, which ranges from
10 bps
to
25 bps
, subject to an adjustment in conjunction with changes to our credit rating. As of
June 30, 2019
,we pay an annual commitment fee of
12.5 bps
on the daily undrawn balance of the Revolving Credit Facility.
The Revolving Credit Facility requires us to maintain an interest expense coverage ratio as described in the Credit Agreement, on a quarterly basis, covering the trailing
four
consecutive fiscal quarters of no less than
3.50
to 1.00. In addition, we are required to maintain the maximum leverage ratio as described in the Credit Agreement on a quarterly basis of
3.00
to 1.00, covering the trailing
four
consecutive fiscal quarters for each fiscal quarter, which can be increased to
4.00
to 1.00 for a period of time in connection with a material acquisition or a series of material acquisitions. As of
June 30, 2019
, we elected to increase the maximum allowed leverage ratio to
4.00
to 1.00 following the Orbotech Acquisition.
We were in compliance with all covenants under the Credit Agreement as of
June 30, 2019
.
93
NOTE 9 — EQUITY, LONG-TERM INCENTIVE COMPENSATION PLANS AND NON-CONTROLLING INTEREST
Equity Incentive Program
As of
June 30, 2019
, we were able to issue new equity incentive awards, such as restricted stock units (“RSUs”) and stock options, to our employees, consultants and members of our Board of Directors under our 2004 Equity Incentive Plan (the “2004 Plan”) with
11.6 million
shares available for issuance.
Any 2004 Plan awards of restricted stock units, performance shares, performance units or deferred stock units are counted against the total number of shares issuable under the 2004 Plan as follows, based on the grant date of the applicable award: (a) for any such awards granted before November 6, 2013, the awards counted against the 2004 Plan share reserve as
1.8
shares for every one share subject thereto; and (b) for any such awards granted on or after November 6, 2013, the awards count against the 2004 Plan share reserve as
2.0
shares for every
one share
subject thereto.
In addition, the plan administrator has the ability to grant “dividend equivalent” rights in connection with awards of restricted stock units, performance shares, performance units and deferred stock units before they are fully vested. The plan administrator, at its discretion, may grant a right to receive dividends on the aforementioned awards which may be settled in cash or our stock at the discretion of the plan administrator subject to meeting the vesting requirement of the underlying awards.
Assumed Equity Plans
As of the Acquisition Date, we assumed outstanding equity incentive awards under the following Orbotech equity incentive plans: (i) Equity Remuneration Plan for Key Employees of Orbotech and its Affiliates and Subsidiaries (as Amended and Restated in 2005), (ii) 2010 Equity-Based Incentive Plan, and (iii) 2015 Equity-Based Incentive Plan (each, an “Assumed Equity Plan” and collectively the “Assumed Equity Plans”). The awards under the Assumed Equity Plans, previously issued in the form of stock options and restricted share units (“RSUs”), were generally settled as follows:
|
a)
|
Each award of Orbotech’s stock options and RSUs that was outstanding and vested immediately prior to the Acquisition Date (collectively the “Vested Equity Awards”) was canceled and terminated and converted into the right to receive the purchase consideration in respect of such Vested Equity Awards as of the Acquisition Date, and in the case of stock options, less the exercise price.
|
|
b)
|
Each award of Orbotech’s stock options and RSUs that was outstanding and unvested immediately prior to the Acquisition Date was assumed by us (each, an “Assumed Option” and “Assumed RSU”, and collectively the “Assumed Equity Awards”) and converted to stock options and RSUs exercisable for the number of shares of our common stock equal to the product of (i) the number of Orbotech shares underlying such Assumed Equity Awards as of immediately prior to the Acquisition Date multiplied by (ii) the exchange ratio defined in the Acquisition Agreement. The Assumed Equity Awards generally retain all of the rights, terms and conditions of the respective plans under which they were originally granted, including the same service-based vesting schedule, applicable thereto.
|
As of the Acquisition Date, the estimated fair value of the Assumed Equity Awards was
$55.0 million
, of which
$13.3 million
was recognized as goodwill and the balance of
$41.7 million
will be recognized as stock-based compensation expense over the remaining service period of the Assumed Equity Awards. The fair value of the Assumed Equity Awards for services rendered through the Acquisition Date was recognized as a component of the merger consideration, with the remaining fair value related to the post-combination services to be recorded as stock-based compensation over the remaining vesting period.
A total of
14,558
and
518,971
shares of our common stock underly the Assumed Options and RSUs and have an estimated weighted average fair value at the Acquisition Date of
$53.3
and
$104.5
per share, respectively. As of
June 30, 2019
, there were
14,558
and
465,587
shares of our common stock underlying the outstanding Assumed Options and RSUs, respectively, under the Assumed Equity Plans. The weighted-average remaining contractual terms, the aggregate intrinsic values, and the weighted average exercise price for the stock options outstanding under the Assumed Equity Plans as of
June 30, 2019
were
4.4 years
,
$0.9 million
, and
$54.0
per share, respectively. No Assumed Options were exercised during the year ended
June 30, 2019
.
94
Equity Incentive Plans - General Information
The following table summarizes the combined activity under our equity incentive plans:
|
(In thousands)
|
Available
For Grant
(1)(5)
|
|
|
Balances as of June 30, 2016
|
6,778
|
|
|
Restricted stock units granted
(2)
|
(2,169
|
)
|
|
Restricted stock units canceled
|
101
|
|
|
Balances as of June 30, 2017
|
4,710
|
|
|
Restricted stock units granted
(2)
|
(1,132
|
)
|
|
Restricted stock units granted adjustment
(4)
|
33
|
|
|
Restricted stock units canceled
|
69
|
|
|
Balances as of June 30, 2018
|
3,680
|
|
|
Plan shares increased
|
12,000
|
|
|
Restricted stock units granted
(2)(3)
|
(2,463
|
)
|
|
Restricted stock units granted adjustment
(4)
|
5
|
|
|
Restricted stock units canceled
|
51
|
|
|
Plan shares expired (1998 Director Plan)
|
(1,660
|
)
|
|
Balances as of June 30, 2019
|
11,613
|
|
__________________
|
(1)
|
The number of RSUs reflects the application of the award multiplier as described above (
1.8
x or
2.0
x depending on the grant date of the applicable award).
|
|
(2)
|
Includes RSUs granted to senior management with performance-based vesting criteria (in addition to service-based vesting criteria for any of such RSUs that are deemed to have been earned) (“performance-based RSUs”). As of
June 30, 2019
, it had not yet been determined the extent to which (if at all) the performance-based vesting criteria had been satisfied. Therefore, this line item includes all such performance-based RSUs granted during the fiscal year, reported at the maximum possible number of shares that may ultimately be issuable if all applicable performance-based criteria are achieved at their maximum levels and all applicable service-based criteria are fully satisfied (
0.7 million
shares,
0.3 million
shares and
84 thousand
shares for the fiscal years ended June 30, 2019, 2018 and 2017, respectively, reflects the application of the
1.8
x or
2.0
x multiplier described above).
|
|
(3)
|
Includes RSUs granted to executive management during the fiscal year ended
June 30, 2019
with both a market condition and a service condition (“market-based RSUs”). Under the award agreements, the vesting of the market-based RSUs is contingent on achieving total stockholder return (including stock price appreciation and cash dividends) objectives on a per share basis of equal to or greater than
150%
,
175%
and
200%
multiplied by the measurement price of
$116.39
during the
five
-year period ending March 20, 2024. The awards are split into three tranches and, to the extent that total stockholder return targets have been met, one-third of the maximum number of shares available under these awards will vest on each of the third, fourth, and fifth anniversaries of the grant date. This line item includes all such market-based RSUs granted during the third quarter of the fiscal year ended
June 30, 2019
reported at the maximum possible number of shares that may ultimately be issuable if all applicable market-based criteria are met at their maximum levels and all applicable service-based criteria are fully satisfied (
0.8 million
shares for the year ended
June 30, 2019
reflects the application of the multiplier described above).
|
|
(4)
|
Represents the portion of RSUs granted with performance-based vesting criteria and reported at the actual number of shares issued upon achievement of the performance vesting criteria during the year ended
June 30, 2019
and
2018
.
|
|
(5)
|
No additional stock options, RSUs or other awards will be granted under the Assumed Equity Plans.
|
The fair value of stock-based awards is measured at the grant date and is recognized as an expense over the employee’s requisite service period. For RSUs granted without “dividend equivalent” rights, fair value is calculated using the closing price of our common stock on the grant date, adjusted to exclude the present value of dividends which are not accrued on those RSUs. The fair value for RSUs granted with “dividend equivalent” rights is determined using the closing price of our common stock on the grant date The fair value for market-based RSUs is estimated on the grant date using a Monte Carlo simulation model with the following assumptions: expected volatilities ranging from
27.8%
to
28.1%
, based on a combination of implied volatility from traded options on our common stock and the historical volatility of our common stock; dividend yield ranging from
2.4%
to
2.5%
, based on our current expectations about our anticipated dividend policy; risk-free interest rate ranging from
2.3%
to
2.4%
, based on the implied yield available on U.S. Treasury zero-coupon issues with terms equal to the contractual terms of each tranche; and an expected term which takes into consideration the vesting term and the contractual term of the
95
market-based award. The awards are amortized over service periods of
three
,
four
, and
five
years, which is the longer of the explicit service period or the period in which the market target is expected to be met. The fair value for purchase rights under our Employee Stock Purchase Plan is determined using a Black-Scholes model.
The following table shows stock-based compensation expense for the indicated periods:
|
Year ended June 30,
|
|||||||||||
|
(In thousands)
|
2019
(1)
|
2018
|
2017
|
||||||||
|
Stock-based compensation expense by:
|
|||||||||||
|
Costs of revenues
|
$
|
10,384
|
|
$
|
8,062
|
|
$
|
5,338
|
|
||
|
Research and development
|
16,225
|
|
11,249
|
|
8,089
|
|
|||||
|
Selling, general and administrative
|
67,585
|
|
43,473
|
|
37,516
|
|
|||||
|
Total stock-based compensation expense
|
$
|
94,194
|
|
$
|
62,784
|
|
$
|
50,943
|
|
||
__________________
|
(1)
|
Includes
$10.9 million
of stock-based compensation expense acceleration for certain equity awards for Orbotech employees.
|
The following table shows stock-based compensation capitalized as inventory as of the dates indicated below:
|
(In thousands)
|
As of June 30,
|
||||||
|
2019
|
2018
|
||||||
|
Inventory
|
$
|
4,819
|
|
$
|
4,580
|
|
|
Restricted Stock Units
The following table shows the activity and weighted-average grant date fair value for RSUs during the fiscal year ended
June 30, 2019
:
|
Shares
(In thousands)
(1)
|
Weighted-Average
Grant Date
Fair Value
|
|||||
|
Outstanding restricted stock units as of June 30, 2018
(2)
|
2,014
|
|
$
|
76.50
|
|
|
|
Granted
(2)
|
1,232
|
|
$
|
99.53
|
|
|
|
Granted adjustments
(3)
|
(2
|
)
|
$
|
50.88
|
|
|
|
Assumed upon Orbotech Acquisition
(4)
|
519
|
|
$
|
104.49
|
|
|
|
Vested and released
|
(500
|
)
|
$
|
73.88
|
|
|
|
Withheld for taxes
|
(323
|
)
|
$
|
73.88
|
|
|
|
Forfeited
|
(38
|
)
|
$
|
92.08
|
|
|
|
Outstanding restricted stock units as of June 30, 2019
(2)
|
2,902
|
|
$
|
91.84
|
|
|
__________________
|
(1)
|
Share numbers reflect actual shares subject to awarded RSUs. Under the terms of the 2004 Plan, the number of shares subject to each award reflected in this number is multiplied by either
1.8
x or
2.0
x (depending on the grant date of the award) to calculate the impact of the award on the share reserve under the 2004 Plan.
|
|
(2)
|
Includes performance-based and market-based RSUs. As of
June 30, 2019
, it had not yet been determined the extent to which (if at all) the performance-based or market-based vesting criteria had been satisfied. Therefore, this line item includes all such RSUs, reported at the maximum possible number of shares (i.e.,
0.7 million
shares for the fiscal year ended
June 30, 2019
,
0.2 million
shares for fiscal year ended
June 30, 2018
and
42 thousand
shares for the fiscal year ended
June 30, 2017
) that may ultimately be issuable if all applicable performance-based and market-based criteria are achieved at their maximum and all applicable service-based criteria are fully satisfied.
|
|
(3)
|
Represents the portion of RSUs granted with performance-based vesting criteria and reported at the actual number of shares issued upon achievement of the performance vesting criteria during the fiscal year ended
June 30, 2019
.
|
|
(4)
|
Represents Assumed RSUs under the Assumed Equity Plans. Since the Assumed RSUs do not have “dividend equivalent” rights, the fair value was calculated using the closing price of our common stock on the Acquisition Date, adjusted to exclude the present value of dividends.
|
96
The RSUs granted by us generally vest (a) with respect to awards with only service-based vesting criteria, over periods ranging from
two
to
four
years and (b) with respect to awards with both performance-based and service-based vesting criteria, in
two
equal installments on the
third
and
fourth
anniversaries of the grant date, and (c) with respect to awards with both market-based and service-based vesting criteria in
three
equal installments on the
third
,
fourth
and
fifth
anniversaries of the grant date, in each case subject to the recipient remaining employed by us as of the applicable vesting date. The RSUs granted to the independent members of the Board of Directors vest annually.
The following table shows the weighted-average grant date fair value per unit for the RSUs granted, vested, and tax benefits realized by us in connection with vested and released RSUs for the indicated periods:
|
(In thousands, except for weighted-average grant date fair value)
|
Year ended June 30,
|
||||||||||
|
2019
|
2018
|
2017
|
|||||||||
|
Weighted-average grant date fair value per unit
|
$
|
99.53
|
|
$
|
95.95
|
|
$
|
78.83
|
|
||
|
Weighted-average fair value per unit assumed upon Orbotech Acquisition
|
$
|
104.49
|
|
$
|
—
|
|
$
|
—
|
|
||
|
Grant date fair value of vested restricted stock units
|
$
|
60,749
|
|
$
|
49,606
|
|
$
|
33,820
|
|
||
|
Tax benefits realized by us in connection with vested and released restricted stock units
|
$
|
15,053
|
|
$
|
16,615
|
|
$
|
15,829
|
|
||
As of
June 30, 2019
, the unrecognized stock-based compensation expense balance related to RSUs was
$179.7 million
, excluding the impact of estimated forfeitures, and will be recognized over a weighted-average remaining contractual term and an estimated weighted-average amortization period of
1.6 years
. The intrinsic value of outstanding RSUs as of
June 30, 2019
was
$343.0 million
.
Cash-Based Long-Term Incentive Compensation
We have adopted a cash-based long-term incentive (“Cash LTI Plan”) program for many of our employees as part of our employee compensation program. Executives and non-employee members of the Board of Directors are not participating in this program. During the fiscal years ended
June 30, 2019
and
2018
, we approved Cash LTI awards of
$85.2 million
and
$64.9 million
, respectively. Cash LTI awards issued to employees under the Cash LTI Plan will vest in
three
or
four
equal installments, with
one-third
or
one-fourth
of the aggregate amount of the Cash LTI award vesting on each anniversary of the grant date over a
three
or
four
-year period. In order to receive payments under a Cash LTI award, participants must remain employed by us as of the applicable award vesting date. During the fiscal years ended
June 30, 2019
,
2018
and
2017
, we recognized
$55.5 million
,
$52.4 million
and
$48.8 million
, respectively, in compensation expense under the Cash LTI Plan. As of
June 30, 2019
, the unrecognized compensation balance (excluding the impact of estimated forfeitures) related to the Cash LTI Plan was
$152.2 million
.
Employee Stock Purchase Plan
Our Employee Stock Purchase Plan (“ESPP”) provides that eligible employees may contribute up to
15%
of their eligible earnings toward the semi-annual purchase of our common stock. The ESPP is qualified under Section 423 of the Internal Revenue Code. The employee’s purchase price is derived from a formula based on the closing price of the common stock on the first day of the offering period versus the closing price on the date of purchase (or, if not a trading day, on the immediately preceding trading day).
The offering period (or length of the look-back period) under the ESPP has a duration of
six months
, and the purchase price with respect to each offering period beginning on or after such date is, until otherwise amended, equal to
85%
of the lesser of (i) the fair market value of our common stock at the commencement of the applicable six-month offering period or (ii) the fair market value of our common stock on the purchase date. We estimate the fair value of purchase rights under the ESPP using a Black-Scholes model.
The fair value of each purchase right under the ESPP was estimated on the date of grant using the Black-Scholes model and the straight-line attribution approach with the following weighted-average assumptions:
97
|
|
Year ended June 30,
|
|||||||
|
|
2019
|
2018
|
2017
|
|||||
|
Stock purchase plan:
|
||||||||
|
Expected stock price volatility
|
33.2
|
%
|
28.7
|
%
|
23.4
|
%
|
||
|
Risk-free interest rate
|
2.1
|
%
|
1.1
|
%
|
0.5
|
%
|
||
|
Dividend yield
|
3.1
|
%
|
2.5
|
%
|
2.8
|
%
|
||
|
Expected life (in years)
|
0.50
|
|
0.50
|
|
0.50
|
|
||
The following table shows total cash received from employees for the issuance of shares under the ESPP, the number of shares purchased by employees through the ESPP, the tax benefits realized by us in connection with the disqualifying dispositions of shares purchased under the ESPP and the weighted-average fair value per share for the indicated periods:
|
(In thousands, except for weighted-average fair value per share)
|
Year ended June 30,
|
||||||||||
|
2019
|
2018
|
2017
|
|||||||||
|
Total cash received from employees for the issuance of shares under the ESPP
|
$
|
64,828
|
|
$
|
61,452
|
|
$
|
45,358
|
|
||
|
Number of shares purchased by employees through the ESPP
|
843
|
|
733
|
|
705
|
|
|||||
|
Tax benefits realized by us in connection with the disqualifying dispositions of shares purchased under the ESPP
|
$
|
1,133
|
|
$
|
1,664
|
|
$
|
1,999
|
|
||
|
Weighted-average fair value per share based on Black-Scholes model
|
$
|
21.72
|
|
$
|
21.95
|
|
$
|
15.16
|
|
||
The ESPP shares are replenished annually on the first day of each fiscal year by virtue of an evergreen provision. The provision allows for share replenishment equal to the lesser of
2.0 million
shares or the number of shares which we estimate will be required to be issued under the ESPP during the forthcoming fiscal year. As of
June 30, 2019
, a total of
1.8 million
shares were reserved and available for issuance under the ESPP.
Quarterly cash dividends
On
May 3, 2019
, our Board of Directors declared a regular quarterly cash dividend of
$0.75
per share on the outstanding shares of our common stock, which was paid on
June 4, 2019
to the stockholders of record as of the close of business on
May 15, 2019
. The total amount of regular quarterly cash dividends and dividend equivalents paid during the fiscal years ended
June 30, 2019
and
2018
was
$469.4 million
and
$395.6 million
, respectively. The amount of accrued dividends equivalents payable for regular quarterly cash dividends on unvested RSUs with dividend equivalent rights was
$7.3 million
and
$6.7 million
as of
June 30, 2019
and
2018
, respectively. These amounts will be paid upon vesting of the underlying RSUs. Refer to Note 19, “Subsequent Events” to the Consolidated Financial Statements for additional information regarding the declaration of our quarterly cash dividend announced subsequent to June 30, 2019.
Special cash dividend
On November 19, 2014, our Board of Directors declared a special cash dividend of
$16.50
per share on our outstanding common stock, which was paid on December 9, 2014 to the stockholders of record as of the close of business on December 1, 2014. The declaration and payment of the special cash dividend was part of our leveraged recapitalization transaction under which the special cash dividend was financed through a combination of existing cash and proceeds from the debt financing disclosed in Note 8, “Debt” that was completed during the three months ended December 31, 2014. As of the declaration date, the total amount of the special cash dividend accrued by us was approximately
$2.76 billion
, substantially all of which was paid out during the three months ended December 31, 2014, except for the aggregate special cash dividend of
$43.0 million
that was accrued for the unvested RSUs and to be paid when such underlying unvested RSUs vest. During the second quarter of fiscal 2019, all of the special cash dividends accrued with respect to outstanding RSUs were vested and paid in full. We paid a special cash dividend with respect to vested RSUs during the fiscal years ended
June 30, 2019
and
2018
of
$2.9 million
and
$6.4 million
respectively. Other than the special cash dividend declared during the three months ended December 31, 2014, we historically have not declared any special cash dividend.
98
Non-controlling Interest
We have consolidated the results of Orbotech LT Solar, LLC (“OLTS”) and Orbograph Ltd. (“Orbograph”), in which we own approximately
84%
and
94%
of the outstanding equity interest, respectively. OLTS is engaged in the research, development and marketing of products for the deposition of thin film coating of various materials on crystalline silicon photovoltaic wafers for solar energy panels through plasma-enhanced chemical vapor deposition (“PECVD”). Orbograph is engaged in the development and marketing of character recognition solutions to banks, financial and other payment processing institutions and healthcare providers.
Additionally, we have consolidated the results of PixCell, an Israeli company developing diagnostic equipment for point-of-care hematology applications of which we own approximately
52%
of the outstanding equity interest and are entitled to appoint the majority of this company’s directors.
NOTE 10 — STOCK REPURCHASE PROGRAM
Our Board of Directors has authorized a program which permits us to repurchase up to
$2.00 billion
of our common stock, reflecting an increase from
$1.00 billion
upon the close of the Orbotech Acquisition. For additional details, refer to Note 1, “Description of Business and Summary of Significant Accounting Policies.” The intent of this program is to offset the dilution from our equity incentive plans, employee stock purchase plan, the issuance of shares in the Orbotech Acquisition, as well as to return excess cash to our stockholders. Subject to market conditions, applicable legal requirements and other factors, the repurchases were made in the open market in compliance with applicable securities laws, including the Securities Exchange Act of 1934 and the rules promulgated thereunder such as Rule 10b-18 and Rule 10b5-1. This stock repurchase program has no expiration date and may be suspended at any time. As of
June 30, 2019
, an aggregate of approximately
$858.7
million was available for repurchase under our stock repurchase program.
Share repurchases for the indicated periods (based on the trade date of the applicable repurchase) were as follows:
|
(In thousands)
|
Year ended June 30,
|
||||||||||
|
2019
|
2018
|
2017
|
|||||||||
|
Number of shares of common stock repurchased
|
10,207
|
|
1,960
|
|
243
|
|
|||||
|
Total cost of repurchases
|
$
|
1,103,202
|
|
$
|
203,169
|
|
$
|
25,002
|
|
||
As of
June 30, 2019
, we had repurchased
68 thousand
shares for
$8.0 million
, for which repurchases had not settled prior to
June 30, 2019
. The amount was recorded as a component of other current liabilities for the period presented.
NOTE 11 — NET INCOME PER SHARE
Basic net income per share is calculated by dividing net income available to common stockholders by the weighted-average number of common shares outstanding during the period. Diluted net income per share is calculated by using the weighted-average number of common shares outstanding during the period, increased to include the number of additional shares of common stock that would have been outstanding if the shares of common stock underlying our outstanding dilutive restricted stock units had been issued. The dilutive effect of outstanding restricted stock units is reflected in diluted net income per share by application of the treasury stock method.
The following table sets forth the computation of basic and diluted net income per share attributable to KLA:
|
(In thousands, except per share amounts)
|
Year ended June 30,
|
||||||||||
|
2019
|
2018
|
2017
|
|||||||||
|
Numerator:
|
|||||||||||
|
Net income attributable to KLA
|
$
|
1,175,617
|
|
$
|
802,265
|
|
$
|
926,076
|
|
||
|
Denominator:
|
|||||||||||
|
Weighted-average shares-basic, excluding unvested restricted stock units
|
156,053
|
|
156,346
|
|
156,468
|
|
|||||
|
Effect of dilutive restricted stock units and options
|
896
|
|
1,032
|
|
1,013
|
|
|||||
|
Weighted-average shares-diluted
|
156,949
|
|
157,378
|
|
157,481
|
|
|||||
|
Basic net income per share attributable to KLA
|
$
|
7.53
|
|
$
|
5.13
|
|
$
|
5.92
|
|
||
|
Diluted net income per share attributable to KLA
|
$
|
7.49
|
|
$
|
5.10
|
|
$
|
5.88
|
|
||
|
Anti-dilutive securities excluded from the computation of diluted net income per share
|
227
|
|
—
|
|
46
|
|
|||||
99
NOTE 12 — EMPLOYEE BENEFIT PLANS
We have a profit sharing program for eligible employees, which distributes, on a quarterly basis, a percentage of our pre-tax profits. In addition, we have an employee savings plan that qualifies as a deferred salary arrangement under Section 401(k) of the Internal Revenue Code. Since April 1, 2011, the employer match amount was
50%
of the first
$8,000
of an eligible employee’s contribution (i.e., a maximum of
$4,000
) during each fiscal year.
The total expenses under the profit sharing and 401(k) programs aggregated
$18.6 million
,
$16.0 million
, and
$15.3 million
in the fiscal years ended
June 30, 2019
,
2018
and
2017
, respectively. We have no defined benefit plans in the United States. In addition to the profit sharing plan and the United States 401(k), several of our foreign subsidiaries have retirement plans for their full-time employees, several of which are defined benefit plans. Consistent with the requirements of local law, our deposits funds for certain of these plans with insurance companies, with third-party trustees or into government-managed accounts and/or accrues for the unfunded portion of the obligation. The assumptions used in calculating the obligation for the foreign plans depend on the local economic environment.
We apply authoritative guidance that requires an employer to recognize the funded status of each of its defined pension and post-retirement benefit plans as a net asset or liability on its balance sheets. Additionally, the authoritative guidance requires an employer to measure the funded status of each of its plans as of the date of its year-end statement of financial position. The benefit obligations and related assets under our plans have been measured as of June 30,
2019
and
2018
.
Summary data relating to our foreign defined benefit pension plans, including key weighted-average assumptions used, is provided in the following tables:
|
|
Year ended June 30,
|
||||||
|
(In thousands)
|
2019
|
2018
|
|||||
|
Change in projected benefit obligation:
|
|||||||
|
Projected benefit obligation as of the beginning of the fiscal year
|
$
|
96,682
|
|
$
|
97,265
|
|
|
|
Service cost
|
4,220
|
|
4,127
|
|
|||
|
Interest cost
|
1,132
|
|
1,302
|
|
|||
|
Contributions by plan participants
|
69
|
|
78
|
|
|||
|
Actuarial (gain) loss
|
4,187
|
|
(8,228
|
)
|
|||
|
Benefit payments
|
(1,755
|
)
|
(1,190
|
)
|
|||
|
Assumed benefit obligation from acquisition
|
11,095
|
|
—
|
|
|||
|
Transfer in
|
—
|
|
2,806
|
|
|||
|
Foreign currency exchange rate changes and others, net
|
(140
|
)
|
522
|
|
|||
|
Projected benefit obligation as of the end of the fiscal year
|
$
|
115,490
|
|
$
|
96,682
|
|
|
|
|
Year ended June 30,
|
||||||
|
(In thousands)
|
2019
|
2018
|
|||||
|
Change in fair value of plan assets:
|
|||||||
|
Fair value of plan assets as of the beginning of the fiscal year
|
$
|
27,932
|
|
$
|
21,780
|
|
|
|
Actual return on plan assets
|
854
|
|
850
|
|
|||
|
Employer contributions
|
3,587
|
|
3,662
|
|
|||
|
Benefit and expense payments
|
(1,752
|
)
|
(1,190
|
)
|
|||
|
Assumed plan assets from acquisition
|
3,424
|
|
—
|
|
|||
|
Transfer in
|
—
|
|
2,806
|
|
|||
|
Foreign currency exchange rate changes and others, net
|
(490
|
)
|
24
|
|
|||
|
Fair value of plan assets as of the end of the fiscal year
|
$
|
33,555
|
|
$
|
27,932
|
|
|
100
|
As of June 30,
|
|||||||
|
(In thousands)
|
2019
|
2018
|
|||||
|
Underfunded status
|
$
|
81,935
|
|
$
|
68,750
|
|
|
|
|
As of June 30,
|
||||||
|
(In thousands)
|
2019
|
2018
|
|||||
|
Plans with accumulated benefit obligations in excess of plan assets:
|
|||||||
|
Accumulated benefit obligation
|
$
|
72,508
|
|
$
|
60,047
|
|
|
|
Projected benefit obligation
|
$
|
115,490
|
|
$
|
96,682
|
|
|
|
Plan assets at fair value
|
$
|
33,555
|
|
$
|
27,932
|
|
|
|
|
Year ended June 30,
|
||||
|
|
2019
|
|
2018
|
|
2017
|
|
Weighted-average assumptions
(1)
:
|
|||||
|
Discount rate
|
0.3%-1.7%
|
0.5%-2.3%
|
0.8%-1.9%
|
||
|
Expected rate of return on assets
|
1.0%-2.9%
|
1.3%-2.9%
|
1.5%-2.9%
|
||
|
Rate of compensation increases
|
1.8%-4.5%
|
3.0%-4.5%
|
3.0%-5.8%
|
||
__________________
|
(1)
|
Represents the weighted-average assumptions used to determine the benefit obligation.
|
The assumptions for expected rate of return on assets were developed by considering the historical returns and expectations of future returns relevant to the country in which each plan is in effect and the investments applicable to the corresponding plan. The discount rate for each plan was derived by reference to appropriate benchmark yields on high quality corporate bonds, allowing for the approximate duration of both plan obligations and the relevant benchmark index.
The following table presents losses recognized in accumulated other comprehensive income (loss) before tax related to our foreign defined benefit pension plans:
|
|
As of June 30,
|
||||||
|
(In thousands)
|
2019
|
2018
|
|||||
|
Unrecognized transition obligation
|
$
|
242
|
|
$
|
251
|
|
|
|
Unrecognized prior service cost
|
4
|
|
28
|
|
|||
|
Unrealized net loss
|
25,721
|
|
23,208
|
|
|||
|
Amount of losses recognized
|
$
|
25,967
|
|
$
|
23,487
|
|
|
Losses in accumulated other comprehensive income (loss) related to our foreign defined benefit pension plans expected to be recognized as components of net periodic benefit cost over the fiscal year ending
June 30, 2020
are as follows:
|
(In thousands)
|
|||
|
Unrecognized prior service cost
|
$
|
3
|
|
|
Unrealized net loss
|
906
|
|
|
|
Amount of losses expected to be recognized
|
$
|
909
|
|
101
The components of our net periodic cost relating to its foreign subsidiaries’ defined pension plans are as follows:
|
|
Year ended June 30,
|
||||||||||
|
(In thousands)
|
2019
|
2018
|
2017
|
||||||||
|
Components of net periodic pension cost:
|
|||||||||||
|
Service cost
(1)
|
$
|
4,220
|
|
$
|
4,127
|
|
$
|
4,015
|
|
||
|
Interest cost
|
1,132
|
|
1,302
|
|
1,117
|
|
|||||
|
Return on plan assets
|
(476
|
)
|
(428
|
)
|
(393
|
)
|
|||||
|
Amortization of transitional obligation
|
—
|
|
—
|
|
251
|
|
|||||
|
Amortization of prior service cost
|
21
|
|
26
|
|
46
|
|
|||||
|
Amortization of net loss
|
1,047
|
|
1,731
|
|
1,617
|
|
|||||
|
Net periodic pension cost
|
$
|
5,944
|
|
$
|
6,758
|
|
$
|
6,653
|
|
||
__________________
|
(1)
|
Service cost is reported in cost of revenues, research and development and selling, general and administrative expenses. All other components of net periodic pension cost are reported in other expense (income), net in the Consolidated Statements of Operations.
|
Fair Value of Plan Assets
Fair value is the price that would be received from selling an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. The three levels of inputs used to measure fair value of plan assets are described in Note 3, “Fair Value Measurements.”
The foreign plans’ investments are managed by third-party trustees consistent with the regulations or market practice of the country where the assets are invested. We are not actively involved in the investment strategy, nor does it have control over the target allocation of these investments. These investments made up
100%
of total foreign plan assets in the fiscal years ended
June 30, 2019
and
2018
.
The expected aggregate employer contribution for the foreign plans during the fiscal year ending
June 30, 2020
is
$3.1 million
.
The total benefits to be paid from the foreign pension plans are not expected to exceed
$5.3 million
in any year through the fiscal year ending June 30,
2029
.
Foreign plan assets measured at fair value on a recurring basis consisted of the following investment categories as of
June 30, 2019
and
2018
, respectively:
|
As of June 30, 2019 (In thousands)
|
Total
|
Quoted Prices in
Active Markets
for Identical
Assets (Level 1)
|
Significant Other
Observable Inputs
(Level 2)
|
||||||||
|
Cash and cash equivalents
|
$
|
18,571
|
|
$
|
18,571
|
|
$
|
—
|
|
||
|
Bonds, equity securities and other investments
|
14,984
|
|
—
|
|
14,984
|
|
|||||
|
Total assets measured at fair value
|
$
|
33,555
|
|
$
|
18,571
|
|
$
|
14,984
|
|
||
|
As of June 30, 2018 (In thousands)
|
Total
|
Quoted Prices in
Active Markets for Identical Assets (Level 1) |
Significant Other
Observable Inputs (Level 2) |
||||||||
|
Cash and cash equivalents
|
$
|
15,737
|
|
$
|
15,737
|
|
$
|
—
|
|
||
|
Bonds, equity securities and other investments
|
12,195
|
|
—
|
|
12,195
|
|
|||||
|
Total assets measured at fair value
|
$
|
27,932
|
|
$
|
15,737
|
|
$
|
12,195
|
|
||
102
Concentration of Risk
We manage a variety of risks, including market, credit and liquidity risks, across our plan assets through our investment managers. We define a concentration of risk as an undiversified exposure to one of the above-mentioned risks that increases the exposure of the loss of plan assets unnecessarily. We monitor exposure to such risks in the foreign plans by monitoring the magnitude of the risk in each plan and diversifying our exposure to such risks across a variety of instruments, markets and counterparties. As of June 30,
2019
, we did not have concentrations of plan asset investment risk in any single entity, manager, counterparty, sector, industry or country.
NOTE 13 — INCOME TAXES
The components of income before income taxes are as follows:
|
|
Year ended June 30,
|
||||||||||
|
(In thousands)
|
2019
|
2018
|
2017
|
||||||||
|
Domestic income before income taxes
|
$
|
545,401
|
|
$
|
716,015
|
|
$
|
615,906
|
|
||
|
Foreign income before income taxes
|
750,830
|
|
739,916
|
|
557,340
|
|
|||||
|
Total income before income taxes
|
$
|
1,296,231
|
|
$
|
1,455,931
|
|
$
|
1,173,246
|
|
||
The provision for income taxes is comprised of the following:
|
(In thousands)
|
Year ended June 30,
|
||||||||||
|
2019
|
2018
|
2017
|
|||||||||
|
Current:
|
|||||||||||
|
Federal
|
$
|
82,460
|
|
$
|
504,758
|
|
$
|
200,831
|
|
||
|
State
|
5,665
|
|
6,422
|
|
4,660
|
|
|||||
|
Foreign
|
59,274
|
|
41,414
|
|
38,208
|
|
|||||
|
147,399
|
|
552,594
|
|
243,699
|
|
||||||
|
Deferred:
|
|||||||||||
|
Federal
|
1,636
|
|
98,702
|
|
444
|
|
|||||
|
State
|
2,118
|
|
1,526
|
|
2,852
|
|
|||||
|
Foreign
|
(29,939
|
)
|
844
|
|
175
|
|
|||||
|
(26,185
|
)
|
101,072
|
|
3,471
|
|
||||||
|
Provision for income taxes
|
$
|
121,214
|
|
$
|
653,666
|
|
$
|
247,170
|
|
||
103
The significant components of deferred income tax assets and liabilities are as follows:
|
(In thousands)
|
As of June 30,
|
||||||
|
2019
|
2018
|
||||||
|
Deferred tax assets:
|
|||||||
|
Tax credits and net operating losses
|
$
|
208,572
|
|
$
|
171,701
|
|
|
|
Employee benefits accrual
|
65,065
|
|
64,707
|
|
|||
|
Stock-based compensation
|
9,432
|
|
8,902
|
|
|||
|
Inventory reserves
|
67,249
|
|
62,232
|
|
|||
|
Non-deductible reserves
|
21,633
|
|
29,841
|
|
|||
|
Depreciation and amortization
|
—
|
|
701
|
|
|||
|
Unearned revenue
|
16,126
|
|
11,104
|
|
|||
|
Unrealized loss on investments
|
1,492
|
|
956
|
|
|||
|
Other
|
55,518
|
|
25,602
|
|
|||
|
Gross deferred tax assets
|
445,087
|
|
375,746
|
|
|||
|
Valuation allowance
|
(166,571
|
)
|
(163,570
|
)
|
|||
|
Net deferred tax assets
|
$
|
278,516
|
|
$
|
212,176
|
|
|
|
Deferred tax liabilities:
|
|||||||
|
Unremitted earnings of foreign subsidiaries not indefinitely reinvested
|
$
|
(243,491
|
)
|
$
|
(7,146
|
)
|
|
|
Deferred profit
|
(15,718
|
)
|
(13,027
|
)
|
|||
|
Depreciation and amortization
|
(515,643
|
)
|
—
|
|
|||
|
Total deferred tax liabilities
|
(774,852
|
)
|
(20,173
|
)
|
|||
|
Total net deferred tax assets (liabilities)
|
$
|
(496,336
|
)
|
$
|
192,003
|
|
|
The provision for income taxes and the significant components of deferred income tax assets and liabilities for the year ended
June 30, 2019
includes the tax impact of the acquisition of Orbotech.
As of
June 30, 2019
, we, excluding Orbotech, had U.S. federal, state and foreign net operating loss (“NOL”) carry-forwards of approximately
$20.5 million
,
$28.9 million
and
$23.1 million
, respectively. Orbotech had U.S. federal, state, and foreign NOLs of approximately
$49.0 million
, $
27.5 million
and $
53.6 million
, respectively. Orbotech also had capital loss carry-forwards of approximately $
44.6 million
. The U.S. federal NOL carry-forwards will expire at various dates beginning in
2023 through 2033
. The utilization of NOLs created by acquired companies is subject to annual limitations under Section 382 of the Internal Revenue Code. However, it is not expected that such annual limitation will significantly impair the realization of these NOLs. The state NOLs will begin to expire in
2019
. Foreign NOLs and capital loss carry-forwards will be carried forward indefinitely. State credits of
$225.8 million
for us including Orbotech, will also be carried forward indefinitely.
The net deferred tax asset valuation allowance was
$166.6 million
and
$163.6 million
as of June 30,
2019
and June 30,
2018
, respectively. The change was primarily due to an increase in the valuation allowance related to state credit carry-forwards generated in the fiscal year ended
June 30, 2019
, partially offset by a decrease in the valuation allowance related to foreign NOL carry-forwards. The valuation allowance is based on our assessment that it is more likely than not that certain deferred tax assets will not be realized in the foreseeable future. Of the valuation allowance as of June 30,
2019
,
$163.2 million
relates to federal and state credit carry-forwards. The remainder of the valuation allowance relates to state NOL carry-forwards.
As of
June 30, 2019
, we intend to indefinitely reinvest
$2.94 billion
of cumulative undistributed earnings held by certain non-U.S. subsidiaries. If these undistributed earnings were repatriated to the U.S., the potential deferred tax liability associated with the undistributed earnings would be approximately
$104.8 million
.
We benefit from tax holidays in Israel and Singapore where we manufacture certain of our products. These tax holidays are on approved investments and are scheduled to expire at varying times in the next
one to nine
years. We are in compliance with all the terms and conditions of the tax holidays as of
June 30, 2019
. The net impact of these tax holidays was to decrease our tax expense by approximately
$31.6 million
,
$39.7 million
and
$32.6 million
in the fiscal years ended
June 30, 2019
,
2018
and
2017
, respectively. The benefits of the tax holidays on diluted net income per share were
$0.20
,
$0.25
and
$0.21
for the fiscal years ended
June 30, 2019
,
2018
and
2017
, respectively.
104
Our Israel tax holiday is scheduled to expire in June 2020. We will adopt Israel’s Preferred Technology Enterprise (“PTE”) regime after the expiration of the current holiday.
The reconciliation of the U.S. federal statutory income tax rate to our effective income tax rate is as follows:
|
|
Year ended June 30,
|
|||||||
|
|
2019
|
2018
|
2017
|
|||||
|
Federal statutory rate
|
21.0
|
%
|
28.1
|
%
|
35.0
|
%
|
||
|
State income taxes, net of federal benefit
|
0.5
|
%
|
0.5
|
%
|
0.4
|
%
|
||
|
Effect of foreign operations taxed at various rates
|
(10.5
|
)%
|
(11.0
|
)%
|
(12.2
|
)%
|
||
|
Tax Cuts and Jobs Act of 2017 - Transition tax and deferred tax effects
|
(1.5
|
)%
|
30.3
|
%
|
—
|
%
|
||
|
Global intangible low-taxed income
|
3.5
|
%
|
—
|
%
|
—
|
%
|
||
|
Foreign derived intangible income
|
(4.0
|
)%
|
—
|
%
|
—
|
%
|
||
|
Research and development tax credit
|
(1.8
|
)%
|
(1.4
|
)%
|
(1.1
|
)%
|
||
|
Net change in tax reserves
|
1.4
|
%
|
(0.4
|
)%
|
1.3
|
%
|
||
|
Domestic manufacturing benefit
|
—
|
%
|
(1.1
|
)%
|
(1.5
|
)%
|
||
|
Effect of stock-based compensation
|
0.4
|
%
|
(0.1
|
)%
|
(0.2
|
)%
|
||
|
Other
|
0.4
|
%
|
—
|
%
|
(0.6
|
)%
|
||
|
Effective income tax rate
|
9.4
|
%
|
44.9
|
%
|
21.1
|
%
|
||
A reconciliation of gross unrecognized tax benefits is as follows:
|
|
Year ended June 30,
|
||||||||||
|
(In thousands)
|
2019
|
2018
|
2017
|
||||||||
|
Unrecognized tax benefits at the beginning of the year
|
$
|
63,994
|
|
$
|
68,439
|
|
$
|
50,365
|
|
||
|
Increases for tax positions from acquisitions
|
60,753
|
|
—
|
|
—
|
|
|||||
|
Increases for tax positions taken in prior years
|
13,001
|
|
4,642
|
|
6,788
|
|
|||||
|
Decreases for tax positions taken in prior years
|
(1,304
|
)
|
(6,045
|
)
|
(246
|
)
|
|||||
|
Increases for tax positions taken in current year
|
26,178
|
|
16,812
|
|
14,696
|
|
|||||
|
Decreases for settlements with taxing authorities
|
—
|
|
(9,666
|
)
|
—
|
|
|||||
|
Decreases for lapsing of statutes of limitations
|
(16,196
|
)
|
(10,188
|
)
|
(3,164
|
)
|
|||||
|
Unrecognized tax benefits at the end of the year
|
$
|
146,426
|
|
$
|
63,994
|
|
$
|
68,439
|
|
||
The amount of unrecognized tax benefits that would impact the effective tax rate was
$136.1 million
,
$57.9 million
and
$68.4 million
as of June 30,
2019
,
2018
and
2017
, respectively. The amount of interest and penalties recognized during the years ended June 30,
2019
,
2018
and
2017
was expense of
$2.9 million
, expense of
$0.1 million
, and income of
$2.2 million
as a result of a release of unrecognized tax benefits, respectively. Our policy is to include interest and penalties related to unrecognized tax benefits within other expense (income), net. The amount of interest and penalties accrued as of June 30,
2019
and
2018
was approximately
$21.8 million
and
$6.0 million
, respectively.
We are subject to federal income tax examinations for all years beginning from the fiscal year ended June 30, 2016 and are under U.S. federal income tax examination for the fiscal year ended June 30, 2016. We are subject to state income tax examinations for all years beginning from the fiscal year ended June 30, 2015. We are also subject to examinations in other major foreign jurisdictions, including Singapore and Israel, for all years beginning from the calendar year ended December 31, 2012. We are under audit in Germany related to a wholly owned subsidiary of Orbotech for the years ended December 31, 2013 to December 31, 2015.
In May 2017, Orbotech received an assessment from the Israel Tax Authority (“ITA”) with respect to its fiscal years 2012 through 2014 (the “Assessment”, and the “Audit Period”, respectively), for an aggregate amount of tax against us, after offsetting all NOLs for tax purposes available through the end of 2014, of approximately NIS
218 million
(approximately
$61.0 million
as of
June 30, 2019
), which amount includes related interest and linkage differentials to the Israeli consumer price index (as of date of the Assessment). We believe our recorded unrecognized tax benefits are sufficient to cover the resolution of the Assessment.
105
On August 31, 2018, Orbotech filed an objection in respect of the tax assessment (the “Objection”). Orbotech is now in the process of the second stage, in which the claims raised by it in the Objection are examined by different personnel at the ITA. In addition, the ITA can examine additional items and may assess additional amounts in the second stage. The second stage must be completed within one year of when the Objection was filed.
In connection with the above, there is an ongoing criminal investigation in Israel against Orbotech, which became our wholly owned subsidiary as of the acquisition date, certain of its employees and its tax consultant. On April 11, 2018, Orbotech received a “suspect notification letter” (dated March 28, 2018) from the Tel Aviv District Attorney’s Office (Fiscal and Financial). In the letter, it was noted that the investigation file was transferred from the Assessment Investigation Officer to the District Attorney’s Office. The letter further states that the District Attorney’s Office has not yet made a decision regarding submission of an indictment against Orbotech; and that if after studying the case, a decision is made to consider prosecuting Orbotech, Orbotech will receive an additional letter, and within 30 days, Orbotech may present its arguments to the District Attorney’s Office as to why it should not be indicted. To date, neither we nor Orbotech has received such an additional letter or any other correspondence or contact from the District Attorney’s Office. We will continue to monitor the progress of the District Attorney's Office investigation, however, cannot anticipate when the review of the case will be completed and what will be the results thereof. We intend to cooperate with the District Attorney’s Office to enable them to conclude their investigation.
It is possible that certain examinations may be concluded in the next twelve months. We believe that we may recognize up to
$14.3 million
of our existing unrecognized tax benefits within the next twelve months as a result of the lapse of statutes of limitations and the resolution of examinations with various tax authorities.
NOTE 14 — COMMITMENTS AND CONTINGENCIES
Factoring.
We have agreements (referred to as “factoring agreements”) with financial institutions to sell certain of our trade receivables and promissory notes from customers without recourse. We do not believe we are at risk for any material losses as a result of these agreements. In addition, we periodically sell certain letters of credit (“LCs”), without recourse, received from customers in payment for goods and services.
The following table shows total receivables sold under factoring agreements and proceeds from sales of LCs for the indicated periods:
|
Year ended June 30,
|
|||||||||||
|
(In thousands)
|
2019
|
2018
|
2017
|
||||||||
|
Receivables sold under factoring agreements
|
$
|
193,089
|
|
$
|
217,462
|
|
$
|
152,509
|
|
||
|
Proceeds from sales of LCs
|
$
|
95,436
|
|
$
|
5,511
|
|
$
|
48,780
|
|
||
Factoring and LC fees for the sale of certain trade receivables were recorded in other expense (income), net and were not material for the periods presented.
Leases.
We lease certain of our facilities, autos and equipment under arrangements that are accounted for as operating leases. Facilities rent expense was
$13.5 million
,
$10.4 million
and
$9.6 million
for the fiscal years ended
June 30, 2019
,
2018
and
2017
, respectively.
The following is a schedule of expected operating lease payments:
|
Fiscal year ending June 30,
|
Amount
(In thousands)
|
||
|
2020
|
$
|
30,296
|
|
|
2021
|
22,250
|
|
|
|
2022
|
16,217
|
|
|
|
2023
|
11,878
|
|
|
|
2024
|
7,912
|
|
|
|
2025 and thereafter
|
15,018
|
|
|
|
Total minimum lease payments
|
$
|
103,571
|
|
106
Purchase Commitments.
We maintain commitments to purchase inventory from our suppliers as well as goods, services, and other assets in the ordinary course of business. Our liability under these purchase commitments is generally restricted to a forecasted time-horizon as mutually agreed upon between the parties. This forecasted time-horizon can vary among different suppliers. Our estimate of our significant purchase commitments for primarily material, services, supplies and asset purchases is approximately
$631.1 million
as of June 30,
2019
, which are primarily due within the next
12
months. Actual expenditures will vary based upon the volume of the transactions and length of contractual service provided. In addition, the amounts paid under these arrangements may be less in the event that the arrangements are renegotiated or canceled. Certain agreements provide for potential cancellation penalties.
Cash Long-Term Incentive Plan.
As of
June 30, 2019
, we have committed
$179.3 million
for future payment obligations under our Cash LTI Plan. The calculation of compensation expense related to the Cash LTI Plan includes estimated forfeiture rate assumptions. Cash LTI awards issued to employees under the Cash LTI Plan vest in
three
or
four
equal installments, with
one-third
or
one-fourth
of the aggregate amount of the Cash LTI award vesting on each anniversary of the grant date over a
three
or
four
-year period. In order to receive payments under a Cash LTI award, participants must remain employed by us as of the applicable award vesting date.
Guarantees and Contingencies.
We maintain guarantee arrangements available through various financial institutions for up to
$50.8 million
, of which
$44.7 million
had been issued as of
June 30, 2019
, primarily to fund guarantees to customs authorities for value-added tax (“VAT”) and other operating requirements of our subsidiaries in Europe, Israel and Asia.
Indemnification Obligations.
Subject to certain limitations, we are obligated to indemnify our current and former directors, officers and employees with respect to certain litigation matters and investigations that arise in connection with their service to us. These obligations arise under the terms of our certificate of incorporation, its bylaws, applicable contracts, and Delaware and California law. The obligation to indemnify generally means that we are required to pay or reimburse the individuals’ reasonable legal expenses and possibly damages and other liabilities incurred in connection with these matters. For example, we have paid or reimbursed legal expenses incurred in connection with the investigation of our historical stock option practices and the related litigation and government inquiries by several of our current and former directors, officers and employees. Although the maximum potential amount of future payments we could be required to make under the indemnification obligations generally described in this paragraph is theoretically unlimited, we believe the fair value of this liability, to the extent estimable, is appropriately considered within the reserve we have established for currently pending legal proceedings.
We are a party to a variety of agreements pursuant to which we may be obligated to indemnify the other party with respect to certain matters. Typically, these obligations arise in connection with contracts and license agreements or the sale of assets, under which we customarily agrees to hold the other party harmless against losses arising from, or provides customers with other remedies to protect against, bodily injury or damage to personal property caused by our products, non-compliance with our product performance specifications, infringement by our products of third-party intellectual property rights and a breach of warranties, representations and covenants related to matters such as title to assets sold, validity of certain intellectual property rights, non-infringement of third-party rights, and certain income tax-related matters. In each of these circumstances, payment by us is typically subject to the other party making a claim to and cooperating with us pursuant to the procedures specified in the particular contract. This usually allows us to challenge the other party’s claims or, in case of breach of intellectual property representations or covenants, to control the defense or settlement of any third-party claims brought against the other party. Further, our obligations under these agreements may be limited in terms of amounts, activity (typically at our option to replace or correct the products or terminate the agreement with a refund to the other party), and duration. In some instances, we may have recourse against third parties and/or insurance covering certain payments made by us.
In addition, we may in limited circumstances enter into agreements that contain customer-specific commitments on pricing, tool reliability, spare parts stocking levels, response time and other commitments. Furthermore, we may give these customers limited audit or inspection rights to enable them to confirm that we are complying with these commitments. If a customer elects to exercise its audit or inspection rights, we may be required to expend significant resources to support the audit or inspection, as well as to defend or settle any dispute with a customer that could potentially arise out of such audit or inspection. To date, we have made no significant accruals in our Consolidated Financial Statements for this contingency. While we have not in the past incurred significant expenses for resolving disputes regarding these types of commitments, we cannot make any assurance that it will not incur any such liabilities in the future.
It is not possible to predict the maximum potential amount of future payments under these or similar agreements due to the conditional nature of our obligations and the unique facts and circumstances involved in each particular agreement. Historically, payments made by us under these agreements have not had a material effect on our business, financial condition, results of operations or cash flows.
107
NOTE 15 — LITIGATION AND OTHER LEGAL MATTERS
We are named from time to time as a party to lawsuits and other types of legal proceedings and claims in the normal course of our business. Actions filed against us include commercial, intellectual property, customer, and labor and employment related claims, including complaints of alleged wrongful termination and potential class action lawsuits regarding alleged violations of federal and state wage and hour and other laws. In general, legal proceedings and claims, regardless of their merit, and associated internal investigations (especially those relating to intellectual property or confidential information disputes) are often expensive to prosecute, defend or conduct and may divert management’s attention and other company resources. Moreover, the results of legal proceedings are difficult to predict, and the costs incurred in litigation can be substantial, regardless of outcome. We believe the amounts provided in our Consolidated Financial Statements are adequate in light of the probable and estimated liabilities. However, because such matters are subject to many uncertainties, the ultimate outcomes are not predictable, and there can be no assurances that the actual amounts required to satisfy alleged liabilities from the matters described above will not exceed the amounts reflected in our Consolidated Financial Statements or will not have a material adverse effect on our results of operations, financial condition or cash flows.
NOTE 16 — DERIVATIVE INSTRUMENTS AND HEDGING ACTIVITIES
The authoritative guidance requires companies to recognize all derivative instruments and hedging activities, including foreign currency exchange contracts and interest rate lock agreements, (collectively “derivatives”) as either assets or liabilities at fair value on the Consolidated Balance Sheets. In accordance with the accounting guidance, we designate foreign currency exchange contracts and interest rate lock agreements as cash flow hedges of certain forecasted foreign currency denominated sales, purchase and spending transactions, and the benchmark interest rate of the corresponding debt financing, respectively.
Our foreign subsidiaries operate and sell our products in various global markets. As a result, we are exposed to risks relating to changes in foreign currency exchange rates. We utilize foreign currency forward exchange contracts and option contracts to hedge against future movements in foreign exchange rates that affect certain existing and forecasted foreign currency denominated sales and purchase transactions, such as the Japanese yen, the euro, the pound sterling and the Israeli new shekel. We routinely hedge our exposures to certain foreign currencies with various financial institutions in an effort to minimize the impact of certain currency exchange rate fluctuations. These currency forward exchange contracts and options, designated as cash flow hedges, generally have maturities of less than
18 months
. Cash flow hedges are evaluated for effectiveness monthly, based on changes in total fair value of the derivatives. If a financial counterparty to any of our hedging arrangements experiences financial difficulties or is otherwise unable to honor the terms of the foreign currency hedge, we may experience material losses.
In October 2014, we entered into a series of forward contracts (“Rate Lock Agreements”) to lock the benchmark rate on a portion of the 2014 Senior Notes. The Rate Lock Agreements had a notional amount of
$1.00 billion
in aggregate which matured in the second quarter of the fiscal year ended June 30, 2015. The Rate Lock Agreements were terminated on the date of pricing of the
$1.25 billion
of
4.650%
Senior Notes due in 2024 and we recorded the fair value of
$7.5 million
as a gain within accumulated other comprehensive income (loss) (“OCI”) as of December 31, 2014. We recognized
$0.8 million
for each of the fiscal years ended
June 30, 2019
,
2018
and
2017
, for the amortization of the gain recognized in accumulated other comprehensive income (loss), which amount reduced the interest expense. As of
June 30, 2019
, the unamortized portion of the fair value of the forward contracts for the rate lock agreements was
$4.0 million
.
During the three months ended
June 30, 2018
, we entered into a series of forward contracts (the “2018 Rate Lock Agreements”) to lock the benchmark interest rate prior to expected debt issuances. The objective of the 2018 Rate Lock Agreements was to hedge the risk associated with the variability in interest rates due to the changes in the benchmark rate leading up to the closing of the intended financing, on the notional amount being hedged. The 2018 Rate Lock Agreement had a notional amount of
$500.0 million
in aggregate, which matured and terminated in the third quarter of fiscal year ended
June 30, 2019
and we recorded the fair value of
$13.6 million
as a loss within OCI. We recognized
$0.3 million
amortization of the loss recognized in AOCI, which increased the interest expense for the fiscal year ended
June 30, 2019
. As of
June 30, 2019
, the unamortized portion of the fair value of the 2018 Rate Lock Agreements was
$13.2 million
.
For derivatives that are designated and qualify as cash flow hedges, the effective portion of the gains or losses is reported in OCI and reclassified into earnings in the same period or periods during which the hedged transaction affects earnings. Prior to adopting the new accounting guidance for hedge accounting, time value was excluded from the assessment of effectiveness for derivatives designated as cash flow hedges. Time value was amortized on a mark-to-market basis and recognized in earnings over the life of the derivative contract. For derivative contracts executed after adopting the new accounting guidance, the election to include time value for the assessment of effectiveness is made on all forward contracts designated as cash flow hedges. The change in fair value of the derivative are recorded in OCI until the hedged item is recognized in earnings. The assessment of effectiveness of options contracts designated as cash flow hedges continue to exclude time value after adopting
108
the new accounting guidance. The initial value of the component excluded from the assessment of effectiveness are recognized in earnings over the life of the derivative contract. Any difference between change in the fair value of the excluded components and the amounts recognized in earnings are recorded in OCI.
For derivatives that are not designated as cash flow hedges, gains and losses are recognized in other expense (income), net. We use foreign currency forward contracts to hedge certain foreign currency denominated assets or liabilities. The gains and losses on these derivative instruments are largely offset by the changes in the fair value of the assets or liabilities being hedged.
Derivatives in Cash Flow Hedging Relationships: Foreign Exchange and Interest Rate Contracts
The gains (losses) on derivatives in cash flow hedging relationships recognized in OCI for the indicated periods were as follows:
|
Year ended June 30,
|
|||||||
|
(In thousands)
|
2019
|
2018
|
|||||
|
Derivatives Designated as Hedging Instruments:
|
|||||||
|
Rate lock agreements:
|
|||||||
|
Amounts included in the assessment of effectiveness
|
$
|
(8,649
|
)
|
$
|
—
|
|
|
|
Foreign exchange contracts:
|
|||||||
|
Amounts included in the assessment of effectiveness
|
$
|
(358
|
)
|
$
|
(1,934
|
)
|
|
|
Amounts excluded from the assessment of effectiveness
|
$
|
(112
|
)
|
$
|
—
|
|
|
The locations and amounts of designated and non-designated derivative’s gains and losses reported in the Consolidated Statements of Operations for the indicated periods were as follows:
|
Year ended June 30,
|
|||||||||||||||||||||||||||||||
|
2019
|
2018
|
||||||||||||||||||||||||||||||
|
(In thousands)
|
Revenues
|
Costs of Revenues and Operating Expense
|
Interest Expense
|
Other Expense (Income), Net
|
Revenues
|
Costs of Revenues
|
Interest Expense
|
Other Expense (Income), Net
|
|||||||||||||||||||||||
|
Total amounts presented in the Consolidated Statements of Operations in which the effects of cash flow hedges are recorded
|
$
|
4,568,904
|
|
$
|
1,869,377
|
|
$
|
124,604
|
|
$
|
(31,462
|
)
|
$
|
4,036,701
|
|
$
|
1,446,041
|
|
$
|
114,376
|
|
$
|
(30,482
|
)
|
|||||||
|
Gains (losses) on Derivatives Designated as Hedging Instruments:
|
|||||||||||||||||||||||||||||||
|
Rate lock agreements:
|
|||||||||||||||||||||||||||||||
|
Amount of gains (losses) reclassified from accumulated OCI to earnings
|
$
|
—
|
|
$
|
—
|
|
$
|
424
|
|
$
|
—
|
|
$
|
—
|
|
$
|
—
|
|
$
|
—
|
|
$
|
—
|
|
|||||||
|
Amount of gains (losses) reclassified from accumulated OCI to earnings as a result that a forecasted transaction is no longer probable of occurring
|
$
|
—
|
|
$
|
—
|
|
$
|
—
|
|
$
|
4
|
|
$
|
—
|
|
$
|
—
|
|
$
|
—
|
|
$
|
—
|
|
|||||||
|
Foreign exchange contracts:
|
|||||||||||||||||||||||||||||||
|
Amount of gains (losses) reclassified from accumulated OCI to earnings
|
$
|
4,329
|
|
$
|
(739
|
)
|
$
|
—
|
|
$
|
—
|
|
$
|
955
|
|
$
|
2,137
|
|
$
|
754
|
|
—
|
|
||||||||
|
Amount excluded from the assessment of effectiveness recognized in earnings based on an amortization approach
|
$
|
—
|
|
$
|
—
|
|
$
|
—
|
|
$
|
—
|
|
$
|
—
|
|
$
|
—
|
|
$
|
—
|
|
$
|
—
|
|
|||||||
|
Amount excluded from the assessment of effectiveness
|
$
|
—
|
|
$
|
—
|
|
$
|
—
|
|
$
|
(323
|
)
|
$
|
—
|
|
$
|
—
|
|
$
|
—
|
|
$
|
(567
|
)
|
|||||||
|
Gains (losses) on Derivatives Not Designated as Hedging Instruments:
|
|||||||||||||||||||||||||||||||
|
Amount of gains (losses) recognized in earnings
|
$
|
—
|
|
$
|
—
|
|
$
|
—
|
|
$
|
(23
|
)
|
$
|
—
|
|
$
|
—
|
|
$
|
—
|
|
$
|
(2,311
|
)
|
|||||||
109
The U.S. dollar equivalent of all outstanding notional amounts of foreign currency hedge contracts, with maximum remaining maturities of approximately
ten months
as of
June 30, 2019
and
2018
, were as follows:
|
(In thousands)
|
As of
June 30, 2019 |
As of
June 30, 2018 |
|||||
|
Cash flow hedge contracts- foreign currency
|
|||||||
|
Purchase
|
$
|
31,108
|
|
$
|
8,116
|
|
|
|
Sell
|
$
|
113,226
|
|
$
|
115,032
|
|
|
|
Other foreign currency hedge contracts
|
|||||||
|
Purchase
|
$
|
257,614
|
|
$
|
130,442
|
|
|
|
Sell
|
$
|
273,061
|
|
$
|
154,442
|
|
|
The locations and fair value of our derivatives reported in our Consolidated Balance Sheets as of the dates indicated below were as follows:
|
|
Asset Derivatives
|
Liability Derivatives
|
|||||||||||||||||
|
|
Balance Sheet
Location
|
As of
June 30, 2019 |
As of
June 30, 2018 |
Balance Sheet
Location
|
As of
June 30, 2019 |
As of
June 30, 2018 |
|||||||||||||
|
(In thousands)
|
Fair Value
|
Fair Value
|
|||||||||||||||||
|
Derivatives designated as hedging instruments
|
|||||||||||||||||||
|
Rate lock contracts
|
Other current assets
|
$
|
—
|
|
$
|
219
|
|
Other current liabilities
|
$
|
—
|
|
$
|
5,158
|
|
|||||
|
Foreign exchange contracts
|
Other current assets
|
397
|
|
3,259
|
|
Other current liabilities
|
2,097
|
|
312
|
|
|||||||||
|
Total derivatives designated as hedging instruments
|
397
|
|
3,478
|
|
2,097
|
|
5,470
|
|
|||||||||||
|
Derivatives not designated as hedging instruments
|
|||||||||||||||||||
|
Foreign exchange contracts
|
Other current assets
|
2,160
|
|
1,907
|
|
Other current liabilities
|
1,237
|
|
1,358
|
|
|||||||||
|
Total derivatives not designated as hedging instruments
|
2,160
|
|
1,907
|
|
1,237
|
|
1,358
|
|
|||||||||||
|
Total derivatives
|
$
|
2,557
|
|
$
|
5,385
|
|
$
|
3,334
|
|
$
|
6,828
|
|
|||||||
The changes in OCI, before taxes, related to derivatives for the indicated periods were as follows:
|
Year ended June 30,
|
||||||||
|
(In thousands)
|
2019
|
2018
|
||||||
|
Beginning balance
|
$
|
2,346
|
|
$
|
8,126
|
|
||
|
Amount reclassified to earnings
|
(4,018
|
)
|
(3,846
|
)
|
||||
|
Net change in unrealized gains or losses
|
(9,119
|
)
|
(1,934
|
)
|
||||
|
Ending balance
|
$
|
(10,791
|
)
|
$
|
2,346
|
|
||
110
Offsetting of Derivative Assets and Liabilities
We present derivatives at gross fair values in the Consolidated Balance Sheets. We have entered into arrangements with each of our counterparties, which reduce credit risk by permitting net settlement of transactions with the same counterparty under certain conditions. The information related to the offsetting arrangements for the periods indicated was as follows (in thousands):
|
As of June 30, 2019
|
Gross Amounts of Derivatives Not Offset in the Consolidated Balance Sheets
|
|||||||||||||||||||||||
|
Description
|
Gross Amounts of Derivatives
|
Gross Amounts of Derivatives Offset in the Consolidated Balance Sheets
|
Net Amount of Derivatives Presented in the Consolidated Balance Sheets
|
Financial Instruments
|
Cash Collateral Received
|
Net Amount
|
||||||||||||||||||
|
Derivatives - assets
|
$
|
2,557
|
|
$
|
—
|
|
$
|
2,557
|
|
$
|
(1,397
|
)
|
$
|
—
|
|
$
|
1,160
|
|
||||||
|
Derivatives - liabilities
|
$
|
(3,334
|
)
|
$
|
—
|
|
$
|
(3,334
|
)
|
$
|
1,397
|
|
$
|
—
|
|
$
|
(1,937
|
)
|
||||||
|
As of June 30, 2018
|
Gross Amounts of Derivatives Not Offset in the Consolidated Balance Sheets
|
|||||||||||||||||||||||
|
Description
|
Gross Amounts of Derivatives
|
Gross Amounts of Derivatives Offset in the Consolidated Balance Sheets
|
Net Amount of Derivatives Presented in the Consolidated Balance Sheets
|
Financial Instruments
|
Cash Collateral Received
|
Net Amount
|
||||||||||||||||||
|
Derivatives - assets
|
$
|
5,385
|
|
$
|
—
|
|
$
|
5,385
|
|
$
|
(1,888
|
)
|
$
|
—
|
|
$
|
3,497
|
|
||||||
|
Derivatives - liabilities
|
$
|
(6,828
|
)
|
$
|
—
|
|
$
|
(6,828
|
)
|
$
|
1,888
|
|
$
|
—
|
|
$
|
(4,940
|
)
|
||||||
NOTE 17 — SEGMENT REPORTING AND GEOGRAPHIC INFORMATION
ASC 280, Segment Reporting, establishes standards for reporting information about operating segments. Operating segments are defined as components of an enterprise about which separate financial information is evaluated regularly by the chief operating decision maker (“CODM”) in deciding how to allocate resources and in assessing performance. Our CODM is our Chief Executive Officer.
As a result of the Orbotech Acquisition, we updated our organizational structure resulting in
four
reportable segments: Semiconductor Process Control; Specialty Semiconductor Process; PCB, Display and Component Inspection; and Other. The reportable segments are determined based on several factors including, but not limited to, customer base, homogeneity of products, technology, delivery channels and similar economic characteristics.
Semiconductor Process Control.
The Semiconductor Process Control (“SPC”) segment offers comprehensive portfolio of inspection, metrology and data analytics products, and related service, which helps integrated circuit manufacturers achieve target yield throughout the entire semiconductor fabrication process-from research and development (“R&D”) to final volume production. Our differentiated products and services are designed to provide comprehensive solutions that help our customers accelerate development and production ramp cycles, achieve higher and more stable semiconductor die yields and improve their overall profitability. This reportable segment is comprised of
two
operating segments.
Specialty Semiconductor Process
The Specialty Semiconductor Manufacturing segment develops and sells advanced vacuum deposition and etching process tools, which are used by a broad range of specialty semiconductor customers, including manufacturers of microelectromechanical systems (“MEMS”), radio frequency (“RF”) communication chips, and power semiconductors for automotive and industrial applications. This reportable segment is comprised of one operating segment.
PCB, Display and Component Inspection
The PCB, Display and Component Inspection segment enable electronic device manufacturers to inspect, test and measure printed circuit boards (“PCBs”), flat panel displays (“FPDs”) and ICs to verify their quality, pattern the desired electronic circuitry on the relevant substrate and perform three-dimensional shaping of metalized circuits on multiple surfaces. This segment also engages in the development and marketing of character recognition solutions to banks, financial and other payment processing institutions and healthcare providers. This reportable segment is comprised of
two
operating segments.
111
Other
We engage in the research, development and marketing of products for the deposition of thin film coating of various materials on crystalline silicon photovoltaic wafers for solar energy panels. This reportable segment is comprised of one operating segment.
The CODM assesses the performance of each operating segment and allocates resources to those segments based on total revenue and segment gross margin and does not evaluate the segments using discrete asset information. Segment gross margin excludes corporate allocation and effects of foreign exchange rates, amortization of intangible assets, amortization of inventory fair value adjustments, and transaction costs associated with our acquisitions related to costs of revenues.
The following is a summary of results for each of our
four
reportable segments for the indicated periods:
|
|
Year ended June 30,
|
||||||||||
|
(In thousands)
|
2019
|
2018
|
2017
|
||||||||
|
Semiconductor Process Control:
|
|||||||||||
|
Revenue
|
$
|
4,080,822
|
|
$
|
3,944,015
|
|
$
|
3,408,876
|
|
||
|
Segment gross margin
|
$
|
2,590,434
|
|
$
|
2,554,223
|
|
$
|
2,160,747
|
|
||
|
Specialty Semiconductor Process:
|
|||||||||||
|
Revenue
|
$
|
151,164
|
|
$
|
—
|
|
$
|
—
|
|
||
|
Segment gross margin
|
$
|
78,800
|
|
$
|
—
|
|
$
|
—
|
|
||
|
PCB, Display and Component Inspection:
|
|||||||||||
|
Revenue
|
$
|
332,810
|
|
$
|
92,516
|
|
$
|
71,557
|
|
||
|
Segment gross margin
|
$
|
155,765
|
|
$
|
38,428
|
|
$
|
30,914
|
|
||
|
Other:
|
|||||||||||
|
Revenue
|
$
|
4,676
|
|
$
|
—
|
|
$
|
—
|
|
||
|
Segment gross margin
|
$
|
1,102
|
|
$
|
—
|
|
$
|
—
|
|
||
|
Totals:
|
|||||||||||
|
Revenue
|
$
|
4,569,472
|
|
$
|
4,036,531
|
|
$
|
3,480,433
|
|
||
|
Segment gross margin
|
$
|
2,826,101
|
|
$
|
2,592,651
|
|
$
|
2,191,661
|
|
||
The following table reconciles total reportable segment revenue to total revenue for the indicated periods:
|
|
Year ended June 30,
|
||||||||||
|
(In thousands)
|
2019
|
2018
|
2017
|
||||||||
|
Total revenue for reportable segments
|
$
|
4,569,472
|
|
$
|
4,036,531
|
|
$
|
3,480,433
|
|
||
|
Corporate allocation and effects of foreign exchange rates
|
(568
|
)
|
170
|
|
(419
|
)
|
|||||
|
Total revenue
|
$
|
4,568,904
|
|
$
|
4,036,701
|
|
$
|
3,480,014
|
|
||
The following table reconciles total segment gross margin to total income before income taxes for the indicated periods:
|
|
Year ended June 30,
|
||||||||||
|
(In thousands)
|
2019
|
2018
|
2017
|
||||||||
|
Total segment gross margin
|
$
|
2,826,101
|
|
$
|
2,592,651
|
|
$
|
2,191,661
|
|
||
|
Merger and acquisition-related charges, corporate allocation, and effects of foreign exchange rates
(1)
|
126,574
|
|
1,991
|
|
(2,138
|
)
|
|||||
|
Research and development
|
711,030
|
|
608,531
|
|
526,688
|
|
|||||
|
Selling, general and administrative
|
599,124
|
|
442,304
|
|
388,211
|
|
|||||
|
Interest expense
|
124,604
|
|
114,376
|
|
122,476
|
|
|||||
|
Other expense (income), net
|
(31,462
|
)
|
(30,482
|
)
|
(16,822
|
)
|
|||||
|
Income before income taxes
|
$
|
1,296,231
|
|
$
|
1,455,931
|
|
$
|
1,173,246
|
|
||
__________________
112
|
(1)
|
Acquisition-related charges primarily include amortization of intangible assets, amortization of inventory fair value adjustments, and other acquisition-related costs classified or presented as part of costs of revenues. Merger-related charges are associated with the merger agreement terminated during the fiscal year ended June 30, 2017 between KLA and Lam Research Corporation (“Lam”) primarily includes employee retention-related expenses associated with costs of revenues.
|
Our significant operations outside the United States include manufacturing facilities in China, Germany, Israel and Singapore and sales, marketing and service offices in Japan, the rest of the Asia Pacific region and Europe. For geographical revenue reporting, revenues are attributed to the geographic location in which the customer is located. Long-lived assets consist of land, property and equipment, net and are attributed to the geographic region in which they are located.
The following is a summary of revenues by geographic region, based on ship-to location, for the indicated periods:
|
(Dollar amounts in thousands)
|
Year ended June 30,
|
|||||||||||||||||||
|
2019
|
2018
|
2017
|
||||||||||||||||||
|
Revenues:
|
||||||||||||||||||||
|
China
|
$
|
1,215,807
|
|
27
|
%
|
$
|
643,033
|
|
16
|
%
|
$
|
412,098
|
|
12
|
%
|
|||||
|
Taiwan
|
1,105,726
|
|
24
|
%
|
636,363
|
|
16
|
%
|
1,104,307
|
|
32
|
%
|
||||||||
|
North America
|
596,452
|
|
13
|
%
|
494,330
|
|
12
|
%
|
523,024
|
|
14
|
%
|
||||||||
|
Korea
|
584,091
|
|
13
|
%
|
1,178,601
|
|
29
|
%
|
688,094
|
|
20
|
%
|
||||||||
|
Japan
|
581,529
|
|
13
|
%
|
638,358
|
|
16
|
%
|
351,202
|
|
10
|
%
|
||||||||
|
Europe and Israel
|
305,924
|
|
7
|
%
|
300,883
|
|
7
|
%
|
263,789
|
|
8
|
%
|
||||||||
|
Rest of Asia
|
179,375
|
|
3
|
%
|
145,133
|
|
4
|
%
|
137,500
|
|
4
|
%
|
||||||||
|
Total
|
$
|
4,568,904
|
|
100
|
%
|
$
|
4,036,701
|
|
100
|
%
|
$
|
3,480,014
|
|
100
|
%
|
|||||
The following is a summary of revenues by major products for the indicated periods:
|
(Dollar amounts in thousands)
|
Year ended June 30,
|
|||||||||||||||||||
|
2019
|
2018
|
2017
|
||||||||||||||||||
|
Revenues:
|
||||||||||||||||||||
|
Wafer Inspection
|
$
|
1,657,753
|
|
36
|
%
|
$
|
1,731,809
|
|
43
|
%
|
$
|
1,600,889
|
|
46
|
%
|
|||||
|
Patterning
|
1,134,409
|
|
25
|
%
|
1,116,022
|
|
28
|
%
|
917,178
|
|
26
|
%
|
||||||||
|
Specialty Semiconductor Process
|
129,854
|
|
3
|
%
|
—
|
|
—
|
%
|
—
|
|
—
|
%
|
||||||||
|
PCB, Display and Component Inspection
|
238,275
|
|
5
|
%
|
85,836
|
|
2
|
%
|
66,399
|
|
2
|
%
|
||||||||
|
Services
|
1,176,661
|
|
26
|
%
|
876,030
|
|
22
|
%
|
776,080
|
|
22
|
%
|
||||||||
|
Other
|
231,952
|
|
5
|
%
|
227,004
|
|
5
|
%
|
119,468
|
|
4
|
%
|
||||||||
|
Total
|
$
|
4,568,904
|
|
100
|
%
|
$
|
4,036,701
|
|
100
|
%
|
$
|
3,480,014
|
|
100
|
%
|
|||||
Wafer Inspection, and Patterning products are offered in Semiconductor Process Control segment. Services are offered in multiple segments. Other includes primarily refurbished systems, remanufactured legacy systems, and enhancements and upgrades for previous-generation products which are part of Semiconductor Process Control segment.
In the fiscal year ended
June 30, 2019
,
one
customer accounted for approximately
15%
of total revenues. In the fiscal year ended
June 30, 2018
,
one
customer accounted for approximately
21%
of total revenues. In the fiscal year ended
June 30, 2017
,
two
customers accounted for approximately
23%
and
16%
of total revenues.
113
Long-lived assets by geographic region as of the dates indicated below were as follows:
|
|
As of June 30,
|
||||||
|
(In thousands)
|
2019
|
2018
|
|||||
|
Long-lived assets:
|
|||||||
|
United States
|
$
|
253,255
|
|
$
|
187,352
|
|
|
|
Israel
|
66,082
|
|
26,980
|
|
|||
|
Europe
|
62,027
|
|
12,924
|
|
|||
|
Singapore
|
49,523
|
|
47,009
|
|
|||
|
Rest of Asia
|
17,912
|
|
12,041
|
|
|||
|
Total
|
$
|
448,799
|
|
$
|
286,306
|
|
|
NOTE 18 — RELATED PARTY TRANSACTIONS
During the fiscal years ended
June 30, 2019
,
2018
and
2017
, we purchased from, or sold to, several entities, where one or more of our executive officers or members of our Board of Directors, or their immediate family members were, during the periods presented, an executive officer or a board member of a subsidiary, including Citrix Systems, Inc., Integrated Device Technology, Inc., Juniper Networks, Inc., Keysight Technologies, Inc., MetLife Insurance K.K., NetApp, Inc., and Proofpoint, Inc.
The following table provides the transactions with these parties for the indicated periods (for the portion of such period that they were considered related):
|
Year ended June 30,
|
|||||||||||
|
(In thousands)
|
2019
|
2018
|
2017
|
||||||||
|
Total revenues
|
$
|
2,402
|
|
$
|
474
|
|
$
|
16
|
|
||
|
Total purchases
(1)
|
$
|
2,881
|
|
$
|
14,723
|
|
$
|
1,048
|
|
||
|
(1)
|
During the fourth quarter of the fiscal year ended June 30, 2018, we acquired a product line from Keysight Technologies, Inc. (“Keysight”) and entered into a transition services agreement pursuant to which Keysight provides certain manufacturing services to us. For additional details refer to Note 6, “Business Combinations”. We recorded the manufacturing services fees under the transition services agreement with Keysight within cost of revenues, which was immaterial for the fiscal year ended
June 30, 2019
and
2018
.
|
Our receivable and payable balances from these parties were immaterial as of
June 30, 2019
and
June 30, 2018
.
NOTE 19 — SUBSEQUENT EVENTS
On
August 1, 2019
, we announced that our Board of Directors had declared a quarterly cash dividend of
$0.75
per share to be paid on
September 3, 2019
to stockholders of record as of the close of business on
August 15, 2019
.
NOTE 20 — QUARTERLY CONSOLIDATED RESULTS OF OPERATIONS (UNAUDITED)
The following is a summary of our quarterly consolidated results of operations (unaudited) for the fiscal years ended June 30,
2019
and
2018
.
|
(In thousands, except per share data)
|
First Quarter Ended
September 30, 2018
|
Second Quarter Ended
December 31, 2018
|
Third Quarter Ended
March 31, 2019
|
Fourth Quarter Ended
June 30, 2019
|
|||||||||||
|
Total revenues
(1)(2)
|
$
|
1,093,260
|
|
$
|
1,119,898
|
|
$
|
1,097,311
|
|
$
|
1,258,435
|
|
|||
|
Gross margin
|
$
|
711,873
|
|
$
|
711,638
|
|
$
|
610,366
|
|
$
|
665,650
|
|
|||
|
Net income attributable to KLA
|
$
|
395,944
|
|
$
|
369,100
|
|
$
|
192,728
|
|
$
|
217,845
|
|
|||
|
Net income attributable to KLA per share:
|
|||||||||||||||
|
Basic
(4)
|
$
|
2.55
|
|
$
|
2.43
|
|
$
|
1.23
|
|
$
|
1.36
|
|
|||
|
Diluted
(4)
|
$
|
2.54
|
|
$
|
2.42
|
|
$
|
1.23
|
|
$
|
1.35
|
|
|||
114
|
(In thousands, except per share data)
|
First Quarter Ended
September 30, 2017
|
Second Quarter Ended
December 31, 2017
|
Third Quarter Ended
March 31, 2018
|
Fourth Quarter Ended
June 30, 2018
|
|||||||||||
|
Total revenues
|
$
|
969,581
|
|
$
|
975,822
|
|
$
|
1,021,294
|
|
$
|
1,070,004
|
|
|||
|
Gross margin
|
$
|
616,464
|
|
$
|
628,820
|
|
$
|
652,938
|
|
$
|
692,438
|
|
|||
|
Net income (loss) attributable to KLA
(3)
|
$
|
280,936
|
|
$
|
(134,319
|
)
|
$
|
306,881
|
|
$
|
348,767
|
|
|||
|
Net income (loss) attributable to KLA per share:
|
|||||||||||||||
|
Basic
(4)
|
$
|
1.79
|
|
$
|
(0.86
|
)
|
$
|
1.96
|
|
$
|
2.24
|
|
|||
|
Diluted
(4)
|
$
|
1.78
|
|
$
|
(0.86
|
)
|
$
|
1.95
|
|
$
|
2.22
|
|
|||
__________________
|
(1)
|
On July 1, 2018, we adopted ASC 606 using the modified retrospective transition approach. Results for reporting periods beginning after June 30, 2018 are presented under ASC 606, while prior period amounts are not adjusted and continue to be reported in accordance with the previous revenue guidance in ASC 605.
|
|
(2)
|
On February 20, 2019, we completed the acquisition of Orbotech for total consideration of approximately
$3.26 billion
. The operating results of Orbotech have been included in our Consolidated financial statements for the fiscal year ended
June 30, 2019
from the Acquisition Date. For additional details, refer to Note 6 “Business Combinations” to our Consolidated Financial Statements.
|
|
(3)
|
We had a net loss of
$134.3 million
in the second quarter of the fiscal year ended
June 30, 2018
, primarily as a result of the income tax effects from the enacted tax reform legislation through the Tax Cuts and Jobs Act, which was signed into law on
December 22, 2017
.
|
|
(4)
|
Basic and diluted net income (loss) per share are computed independently for each of the quarters presented based on the weighted-average basic and fully diluted shares outstanding for each quarter. Therefore, the sum of quarterly basic and diluted net income (loss) per share information may not equal annual basic and diluted net income (loss) per share.
|
115
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Board of Directors and Stockholders of KLA Corporation:
Opinions on the Financial Statements and Internal Control over Financial Reporting
We have audited the accompanying consolidated balance sheets of KLA Corporation (formerly known as KLA-Tencor Corporation) and its subsidiaries (the “Company”) as of June 30, 2019 and 2018, and the related consolidated statements of operations, comprehensive income, stockholders’ equity and cash flows for each of the three years in the period ended June 30, 2019, including the related notes and financial statement schedule listed in the index appearing under Item 15(a)(2) (collectively referred to as the “consolidated financial statements”). We also have audited the Company's internal control over financial reporting as of June 30, 2019, based on criteria established in
Internal Control - Integrated Framework
(2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO).
In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of the Company as of
June 30, 2019
and 2018, and the results of its operations and its cash flows for each of the three years in the period ended
June 30, 2019
in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of
June 30, 2019
, based on criteria established in
Internal Control—Integrated Framework (2013)
issued by the COSO.
Change in Accounting Principle
As discussed in Notes 1 and 2 to the consolidated financial statements, the Company changed the manner in which it accounts for revenues from contracts with customers in 2019.
Basis for Opinions
The Company’s management is responsible for these consolidated financial statements, for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting, included in Management’s Report on Internal Control over Financial Reporting appearing under Item 9A. Our responsibility is to express opinions on the Company’s consolidated financial statements and on the Company’s internal control over financial reporting based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud, and whether effective internal control over financial reporting was maintained in all material respects.
Our audits of the consolidated financial statements included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.
As described in Management’s Report on Internal Control over Financial Reporting, management has excluded Orbotech, Ltd. from its assessment of internal control over financial reporting as of June 30, 2019 because it was acquired by the Company in a purchase business combination during 2019. We have also excluded Orbotech, Ltd. from our audit of internal control over financial reporting. Orbotech, Ltd. is a wholly-owned subsidiary whose total assets and total revenues excluded from management’s assessment and our audit of internal control over financial reporting were $917.6 million and $388.9 million, respectively, of the related consolidated financial statement amounts as of and for the year ended June 30, 2019.
116
Definition and Limitations of Internal Control over Financial Reporting
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
Critical Audit Matters
The critical audit matters communicated below are matters arising from the current period audit of the consolidated financial statements that were communicated or required to be communicated to the audit committee and that (i) relate to accounts or disclosures that are material to the consolidated financial statements and (ii) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matters below, providing separate opinions on the critical audit matters or on the accounts or disclosures to which they relate.
Acquisition of Orbotech, Ltd. - Valuation of Intangible Assets
As described in Notes 1 and 6 to the consolidated financial statements, the Company completed the acquisition of Orbotech, Ltd. (“Orbotech”) for consideration of approximately $3.26 billion in 2019, which resulted in approximately $1.55 billion of intangible assets being recorded. Management applied significant judgment in estimating the fair value of the intangible assets acquired, which involved the use of significant estimates and assumptions with respect to the revenue growth rates, technology migration curves, discount rates, royalty rates and customer attrition rates.
The principal considerations for our determination that performing procedures relating to the valuation of the intangible assets acquired in the acquisition of Orbotech is a critical audit matter are there was a high degree of auditor judgment and subjectivity in applying procedures relating to the fair value measurement of intangible assets acquired due to the significant amount of judgment by management when developing the estimate. Significant audit effort was required in performing procedures and evaluating the significant assumptions relating to the estimate, including the revenue growth rates and the technology migration curves; and the audit effort involved the use of professionals with specialized skill and knowledge to assist in evaluating the audit evidence obtained from these procedures.
Addressing the matter involved performing procedures and evaluating audit evidence in connection with forming our overall opinion on the consolidated financial statements. These procedures included testing the effectiveness of controls relating to the acquisition accounting, including controls over management’s valuation of intangible assets and controls over development of the assumptions related to the valuation of the intangible assets. These procedures also included, among others, reading the purchase agreement, and testing management’s process for estimating the fair value of intangible assets. Testing management’s process included evaluating the appropriateness of the valuation methods and the reasonableness of significant assumptions, including the revenue growth rates and the technology migration curves for the intangible assets, and using professionals with specialized skill and knowledge to assist with the evaluation. Evaluating the reasonableness of the revenue growth rates involved considering the past performance of the acquired business as well as economic and industry forecasts. The technology migration curves were evaluated by considering the revenue attribution between existing technology and in-process research and development based on the assessment of the separation of forecasted future revenue between developed products and new generation products together with the technology carryover rate.
117
Uncertain Tax Positions related to the Orbotech Acquisition
As described in Note 13 to the consolidated financial statements, the Company has recorded liabilities for gross uncertain tax positions of approximately $60.8 million at June 30, 2019 in connection with acquisitions completed by the Company. The majority of the uncertain tax positions were related to the Orbotech acquisition. The uncertain tax positions for the Orbotech acquisition relate to multiple jurisdictions, including Israel, which as further discussed in Note 13 is comprised principally of a liability for an uncertain tax position arising from the assessment Orbotech received from the Israel Tax Authority (“ITA”) with respect to its fiscal years 2012 through 2014. The calculation of the Company’s tax liabilities including liabilities associated with the Orbotech acquisition, involves dealing with uncertainties in the application of complex tax regulations. The evaluation is based on factors including, but not limited to, changes in facts or circumstances, changes in tax law, effectively settled issues under audit and new audit activity.
The principal considerations for our determination that performing procedures relating to the uncertain tax positions related to the Orbotech acquisition is a critical audit matter are there was significant judgment by management when evaluating uncertain tax positions, including a high degree of estimation uncertainty relative to the application of complex tax regulations and evaluation of factors including changes in facts or circumstances, changes in tax law, effectively settled issues under audit and new audit activity. This in turn led to significant auditor judgment and effort in performing procedures to evaluate the timely identification and accurate measurement of uncertain tax positions. Also, the evaluation of audit evidence available to support the tax liabilities for uncertain tax positions is complex and required significant auditor judgment as the nature of the evidence is often highly subjective, and the audit effort involved the use of professionals with specialized skill and knowledge to assist in evaluating the audit evidence obtained from these procedures.
Addressing the matter involved performing procedures and evaluating audit evidence in connection with forming our overall opinion on the consolidated financial statements. These procedures included testing the effectiveness of controls relating to the identification and recognition of the liability for uncertain tax positions, and controls addressing completeness of the uncertain tax positions, as well as controls over measurement of the liability. These procedures also included, among others, (i) testing and evaluating the information used in the calculation of the liability for uncertain tax positions related to the Orbotech acquisition, including international filing positions, the related final tax returns and communications between the Company and the tax authorities; (ii) testing the calculation of the liability for uncertain tax positions by jurisdiction, including management’s assessment of the technical merits of tax positions related to the Orbotech matters and estimates of the amount of tax benefit expected to be sustained for the matters; (iii) testing the completeness of management’s assessment of both the identification of uncertain tax positions and possible outcomes of each uncertain tax position; and (iv) evaluating the status and results of income tax audits with other relevant tax authorities. Professionals with specialized skill and knowledge were used to assist in the evaluation of the completeness and measurement of the uncertain tax positions related to the Orbotech acquisition, including evaluating the reasonableness of management’s assessment of whether tax positions are more-likely-than-not of being sustained, the amount of potential benefit to be realized, and the application of relevant tax laws.
/s/ PricewaterhouseCoopers LLP
San Jose, California
August 16, 2019
We have served as the Company’s auditor since 1977.
118
|
ITEM 9.
|
CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
|
None.
|
ITEM 9A.
|
CONTROLS AND PROCEDURES
|
Evaluation of Disclosure Controls and Procedures
We conducted an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”)) (“Disclosure Controls”) as of the end of the period covered by this Annual Report on Form 10-K (this “Report”) required by Exchange Act Rules 13a-15(b) or 15d-15(b). The controls evaluation was conducted under the supervision and with the participation of our management, including our Chief Executive Officer (“CEO”) and Chief Financial Officer (“CFO”). Based on this evaluation, the CEO and CFO have concluded that as of the end of the period covered by this Report our Disclosure Controls were effective at a reasonable assurance level.
Attached as exhibits to this Report are certifications of the CEO and CFO, which are required in accordance with Rule 13a-14 of the Exchange Act. This Controls and Procedures section includes the information concerning the controls evaluation referred to in the certifications, and it should be read in conjunction with the certifications for a more complete understanding of the topics presented.
Definition of Disclosure Controls
Disclosure Controls are controls and procedures designed to reasonably assure that information required to be disclosed in our reports filed under the Exchange Act, such as this Report, is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms. Disclosure Controls are also designed to reasonably assure that such information is accumulated and communicated to our management, including our CEO and CFO, as appropriate to allow timely decisions regarding required disclosure. Our Disclosure Controls include components of our internal control over financial reporting, which consists of control processes designed to provide reasonable assurance regarding the reliability of our financial reporting and the preparation of financial statements in accordance with generally accepted accounting principles in the United States. To the extent that components of our internal control over financial reporting are included within our Disclosure Controls, they are included in the scope of our annual controls evaluation.
Management’s Report on Internal Control over Financial Reporting
Our management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act. Under the supervision and with the participation of our management, including our CEO and CFO, we conducted an evaluation of the effectiveness of our internal control over financial reporting based on criteria established in the framework in
Internal Control—Integrated Framework (2013)
issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on this evaluation, our management concluded that our internal control over financial reporting was effective as of
June 30, 2019
.
Management excluded Orbotech, Ltd (“Orbotech”), which was acquired by us on February 20, 2019, from its assessment of internal control over financial reporting as of June 30, 2019. Total assets and revenues of Orbotech excluded from our assessment of internal control over financial reporting, were
$917.6
million as of June 30, 2019, and
$388.9
million for the year ended June 30, 2019, respectively.
The effectiveness of our internal control over financial reporting as of
June 30, 2019
has been audited by PricewaterhouseCoopers LLP, an independent registered public accounting firm, as stated in their report which appears in Item 8, “Financial Statements and Supplementary Data” in this Annual Report on Form 10-K.
119
Limitations on the Effectiveness of Controls
Our management, including the CEO and CFO, does not expect that our Disclosure Controls or internal control over financial reporting will prevent all error and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within the Company have been detected. These inherent limitations include the realities that judgments in decision making can be faulty and that breakdowns can occur because of simple error or mistake. Controls can also be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the controls. The design of any system of controls is based in part on certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving our stated goals under all potential future conditions. Over time, controls may become inadequate because of changes in conditions or deterioration in the degree of compliance with policies or procedures. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected.
Changes in Internal Control over Financial Reporting
There were no changes in our internal control over financial reporting identified in connection with the evaluation required by Rule 13a-15(d) and 15d-15(d) of the Exchange Act that occurred during the fourth quarter of the fiscal year ended June 30, 2019 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.
|
ITEM 9B.
|
OTHER INFORMATION
|
None.
120
PART III
|
ITEM 10.
|
DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
|
For the information required by this Item, see “Information About the Directors and the Nominees,” “Information About Executive Officers,” “Security Ownership of Certain Beneficial Owners and Management—Section 16(a) Beneficial Ownership Reporting Compliance,” “Our Corporate Governance Practices—Standards of Business Conduct; Whistleblower Hotline and Website” and “Information About the Board of Directors and Its Committees—Audit Committee” in the Proxy Statement, which is incorporated herein by reference.
|
ITEM 11.
|
EXECUTIVE COMPENSATION
|
For the information required by this Item, see “Executive Compensation and Other Matters,” “Director Compensation” and “Information About the Board of Directors and Its Committees—Compensation Committee—Risk Considerations in Our Compensation Programs” in the Proxy Statement, which is incorporated herein by reference.
|
ITEM 12.
|
SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
|
For the information required by this Item, see “Security Ownership of Certain Beneficial Owners and Management” and “Equity Compensation Plan Information” in the Proxy Statement, which is incorporated herein by reference.
|
ITEM 13.
|
CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
|
For the information required by this Item, see “Certain Relationships and Related Transactions” and “Information About the Board of Directors and Its Committees —The Board of Directors” in the Proxy Statement, which is incorporated herein by reference.
|
ITEM 14.
|
PRINCIPAL ACCOUNTING FEES AND SERVICES
|
For the information required by this Item, see “Proposal Two: Ratification of Appointment of PricewaterhouseCoopers LLP as Our Independent Registered Public Accounting Firm for the Fiscal Year Ending
June 30, 2020
” in the Proxy Statement, which is incorporated herein by reference.
121
PART IV
|
ITEM 15.
|
EXHIBITS, FINANCIAL STATEMENT SCHEDULES
|
(a) The following documents are filed as part of this Annual Report on Form 10-K:
1. Financial Statements:
The following financial statements and schedules of the Registrant are contained in Item 8, “Financial Statements and Supplementary Data” of this Annual Report on Form 10-K:
2. Financial Statement Schedule:
The following financial statement schedule of the Registrant is filed as part of this Annual Report on Form 10-K and should be read in conjunction with the financial statements:
|
Schedule II—Valuation and Qualifying Accounts
for the years ended June 30, 2019, 2018 and 2017
|
|
All other schedules are omitted because they are either not applicable or the required information is shown in the Consolidated Financial Statements or notes thereto.
3. Exhibits
The information required by this Item is set forth in the Exhibit Index following Schedule II included in this Annual Report.
122
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
|
|
KLA Corporation
|
|||
|
August 16, 2019
|
By:
|
|
/
S
/ R
ICHARD
P. W
ALLACE
|
|
|
(Date)
|
|
Richard P. Wallace
|
||
|
|
President and Chief Executive Officer
|
|||
123
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.
|
Signature
|
|
Title
|
|
Date
|
|
/s/ R
ICHARD
P. W
ALLACE
|
|
President, Chief Executive Officer and Director (principal executive officer)
|
|
August 16, 2019
|
|
Richard P. Wallace
|
|
|
||
|
/s/ B
REN
D. H
IGGINS
|
|
Executive Vice President and Chief Financial Officer (principal financial officer)
|
|
August 16, 2019
|
|
Bren D. Higgins
|
|
|
||
|
/s/ V
IRENDRA
A. K
IRLOSKAR
|
|
Senior Vice President and Chief Accounting Officer (principal accounting officer)
|
|
August 16, 2019
|
|
Virendra A. Kirloskar
|
||||
|
/s/ E
DWARD
W. B
ARNHOLT
|
|
Chairman of the Board and Director
|
|
August 15, 2019
|
|
Edward W. Barnholt
|
||||
|
/s/ R
OBERT
M. C
ALDERONI
|
|
Director
|
|
August 14, 2019
|
|
Robert M. Calderoni
|
||||
|
/s/ J
OHN
T. D
ICKSON
|
|
Director
|
|
August 14, 2019
|
|
John T. Dickson
|
||||
|
/s/ J
ENEANNE
H
ANLEY
|
Director
|
August 15, 2019
|
||
|
Jeneanne Hanley
|
||||
|
/s/ E
MIKO
H
IGASHI
|
Director
|
August 15, 2019
|
||
|
Emiko Higashi
|
||||
|
/s/ K
EVIN
J. K
ENNEDY
|
|
Director
|
|
August 15, 2019
|
|
Kevin J. Kennedy
|
||||
|
/s/ G
ARY
B. M
OORE
|
Director
|
August 15, 2019
|
||
|
Gary B. Moore
|
||||
|
/s/ K
IRAN
M. P
ATEL
|
|
Director
|
|
August 14, 2019
|
|
Kiran M. Patel
|
||||
|
Director
|
||||
|
Victor Peng
|
||||
|
/s/ A
NA
G. P
INCZUK
|
|
Director
|
August 14, 2019
|
|
|
Ana G. Pinczuk
|
||||
|
/s/ R
OBERT
A. R
ANGO
|
Director
|
August 15, 2019
|
||
|
Robert A. Rango
|
||||
124
SCHEDULE II
Valuation and Qualifying Accounts
|
(In thousands)
|
Balance at
Beginning
of Period
|
Charged to
Expense
|
Deductions/
Adjustments
|
Balance
at End
of Period
|
|||||||||||
|
Fiscal Year Ended June 30, 2017:
|
|||||||||||||||
|
Allowance for Doubtful Accounts
|
$
|
21,672
|
|
$
|
—
|
|
$
|
(36
|
)
|
$
|
21,636
|
|
|||
|
Allowance for Deferred Tax Assets
|
$
|
104,968
|
|
$
|
—
|
|
$
|
15,740
|
|
$
|
120,708
|
|
|||
|
Fiscal Year Ended June 30, 2018:
|
|||||||||||||||
|
Allowance for Doubtful Accounts
|
$
|
21,636
|
|
$
|
—
|
|
$
|
(9,997
|
)
|
$
|
11,639
|
|
|||
|
Allowance for Deferred Tax Assets
|
$
|
120,708
|
|
$
|
1,152
|
|
$
|
41,710
|
|
$
|
163,570
|
|
|||
|
Fiscal Year Ended June 30, 2019:
|
|
|
|||||||||||||
|
Allowance for Doubtful Accounts
|
$
|
11,639
|
|
$
|
364
|
|
$
|
(2
|
)
|
$
|
12,001
|
|
|||
|
Allowance for Deferred Tax Assets
|
$
|
163,570
|
|
$
|
—
|
|
$
|
3,001
|
|
$
|
166,571
|
|
|||
125
KLA CORPORATION
EXHIBIT INDEX
|
Exhibit
Number
|
Exhibit Description
|
Incorporated by Reference
|
||||||||
|
Form
|
File No.
|
Exhibit
Number
|
Filing Date
|
|||||||
|
8-K
|
No. 000-09992
|
3.2
|
July 16, 2019
|
|||||||
|
8-K
|
No. 000-09992
|
4.1
|
November 7, 2014
|
|||||||
|
8-K
|
No. 000-09992
|
4.2
|
November 7, 2014
|
|||||||
|
8-K
|
No. 000-09992
|
4.2
|
March 20, 2019
|
|||||||
|
S-8
|
No. 228283
|
10.1
|
November 8, 2018
|
|||||||
|
10-Q
|
No. 000-09992
|
10.18
|
May 4, 2006
|
|||||||
|
8-K
|
No. 000-09992
|
10.49
|
August 12, 2014
|
|||||||
|
8-K
|
No. 000-09992
|
10.1
|
August 2, 2012
|
|||||||
|
8-K
|
No. 000-09992
|
10.50
|
August 12, 2014
|
|||||||
|
8-K
|
No. 000-09992
|
10.51
|
August 12, 2014
|
|||||||
|
8-K
|
No. 000-09992
|
10.46
|
August 12, 2014
|
|||||||
|
8-K
|
No. 000-09992
|
10.48
|
August 12, 2014
|
|||||||
|
8-K
|
No. 000-09992
|
10.1
|
November 30, 2017
|
|||||||
|
8-K
|
No. 000-09992
|
10.1
|
October 20, 2016
|
|||||||
|
10-Q
|
No. 000-09992
|
10.45
|
October 22, 2015
|
|||||||
|
S-8
|
No. 333-230112
|
10.1
|
March 7, 2019
|
|||||||
126
|
Exhibit
Number
|
Exhibit Description
|
Incorporated by Reference
|
||||||||
|
Form
|
File No.
|
Exhibit
Number
|
Filing Date
|
|||||||
|
S-8
|
No. 333-230112
|
10.2
|
March 7, 2019
|
|||||||
|
S-8
|
No. 333-230112
|
10.3
|
March 7, 2019
|
|||||||
|
10-Q
|
No. 000-09992
|
10.1
|
May 8, 2019
|
|||||||
|
10-Q
|
No. 000-0992
|
10.2
|
May 8, 2019
|
|||||||
|
101.INS
|
XBRL Instance Document
|
|||||||||
|
101.SCH
|
XBRL Taxonomy Extension Schema Document
|
|||||||||
|
101.CAL
|
XBRL Taxonomy Extension Calculation Linkbase Document
|
|||||||||
|
101.DEF
|
XBRL Taxonomy Extension Definition Linkbase Document
|
|||||||||
|
101.LAB
|
XBRL Taxonomy Extension Label Linkbase Document
|
|||||||||
|
101.PRE
|
XBRL Taxonomy Extension Presentation Linkbase Document
|
|||||||||
|
*
|
Denotes a management contract, plan or arrangement.
|
|
+
|
Confidential treatment has been requested as to a portion of this exhibit.
|
ITEM 16. FORM 10-K SUMMARY
None.
127
TABLE OF CONTENTS
Part IprintItem 1. BusinessprintItem 1A. Risk FactorsprintItem 1B. Unresolved Staff CommentsprintItem 2. PropertiesprintItem 3. Legal ProceedingsprintItem 4. Mine Safety DisclosuresprintPart IIprintItem 5. Market For Registrant S Common Equity, Related Stockholder Matters and Issuer Purchases Of Equity SecuritiesprintItem 6. Selected Financial DataprintItem 7. Management S Discussion and Analysis Of Financial Condition and Results Of OperationsprintItem 7A. Quantitative and Qualitative Disclosures About Market RiskprintItem 8. Financial Statements and Supplementary DataprintNote 1 Description Of Business and Summary Of Significant Accounting PoliciesprintNote 2 RevenueprintNote 3 Fair Value MeasurementsprintNote 4 Financial Statement ComponentsprintNote 5 Marketable SecuritiesprintNote 6 - Business CombinationsprintNote 7 Goodwill and Purchased Intangible AssetsprintNote 8 DebtprintNote 9 Equity, Long-term Incentive Compensation Plans and Non-controlling InterestprintNote 10 Stock Repurchase ProgramprintNote 11 Net Income Per ShareprintNote 12 Employee Benefit PlansprintNote 13 Income TaxesprintNote 14 Commitments and ContingenciesprintNote 15 Litigation and Other Legal MattersprintNote 16 Derivative Instruments and Hedging ActivitiesprintNote 17 Segment Reporting and Geographic InformationprintNote 18 Related Party TransactionsprintNote 19 Subsequent EventsprintNote 20 Quarterly Consolidated Results Of Operations (unaudited)printItem 9. Changes in and Disagreements with Accountants on Accounting and Financial DisclosureprintItem 9A. Controls and ProceduresprintItem 9B. Other InformationprintPart IIIprintItem 10. Directors, Executive Officers and Corporate GovernanceprintItem 11. Executive CompensationprintItem 12. Security Ownership Of Certain Beneficial Owners and Management and Related Stockholder MattersprintItem 13. Certain Relationships and Related Transactions, and Director IndependenceprintItem 14. Principal Accounting Fees and ServicesprintPart IVprintItem 15. Exhibits, Financial Statement SchedulesprintItem 16. Form 10-k Summaryprint