UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM
(Mark One)
For the fiscal year ended
OR
For the transition period from __________________ to ______________________.
Commission file number
(Exact name of registrant as specified in its charter)
| ||
(State or other jurisdiction of | (I.R.S. Employer | |
incorporation or organization) | Identification No.) | |
(Address of principal executive offices) | (Zip Code) |
(
(Registrant’s telephone number, including area code)
Securities registered pursuant to Section 12(b) of the Act:
Title of each class |
| Trading Symbol(s) |
| Name of each exchange on which registered | |
Securities registered pursuant to Section 12(g) of the Act:
None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes ☐
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer ☐ |
| Accelerated filer ☐ |
Smaller reporting company | ||
Emerging growth company |
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes
As of June 30, 2021, the aggregate market value of the voting and non-voting common equity held by non-affiliates was $
As of March 29, 2022, the registrant had
DOCUMENTS INCORPORATED BY REFERENCE
None
INTERLINK ELECTRONICS, INC.
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2021
TABLE OF CONTENTS
2
SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS
Certain statements and information in this Annual Report on Form 10-K may constitute forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended, or the Exchange Act. The words “believe,” “may,” “will,” “potentially,” “estimate,” “continue,” “anticipate,” “intend,” “could,” “would,” “project,” “plan,” “expect” and similar expressions that convey uncertainty of future events or outcomes are intended to identify forward-looking statements. These statements involve known and unknown risks, uncertainties and other important factors that may cause our actual results, performance or achievements to be materially different from any future results, performances or achievements expressed or implied by the forward-looking statements. These forward-looking statements may include, but are not limited to, statements concerning the following:
| ● | the impact of the coronavirus or COVID-19 pandemic on our worldwide operations and those of our business partners; |
| ● | our ability to fund our planned operations and implement our business plan; |
| ● | our future financial and operating results; |
| ● | our plans regarding the use of proceeds from our equity financings and the expected duration of our capital resources; |
| ● | our plans regarding future financings; |
| ● | our hiring plans; |
| ● | our business strategy; |
| ● | our intentions, expectations and beliefs regarding anticipated growth, market penetration and trends in our business; |
| ● | our dependence on growth in our customers’ businesses; |
| ● | the effects of market conditions on our stock price and operating results; |
| ● | our ability to maintain our competitive technological advantages against competitors in our industry and the related costs associated with defending intellectual property infringement and other claims; |
| ● | our ability to timely and effectively adapt our existing technology and have our technology solutions gain market acceptance; |
| ● | our ability to introduce new products and bring them to market in a timely manner; |
| ● | our ability to maintain, protect and enhance our intellectual property; |
| ● | our expectations concerning our relationships with our customers and other third parties and our customers’ relationships with their manufacturers; |
| ● | the attraction and retention of qualified employees and key personnel; |
| ● | the effects of increased competition in our market and our ability to compete effectively; |
| ● | future acquisitions of or investments in complementary companies or technologies; and |
| ● | our ability to comply with evolving legal standards and regulations, particularly concerning requirements for being a public company and United States export regulations. |
3
These forward-looking statements speak only as of the date of this Form 10-K and are subject to uncertainties, assumptions and business and economic risks. As such, our actual results could differ materially from those set forth in the forward-looking statements as a result of the factors set forth below in Part I, Item 1A, “Risk Factors,” and in our other reports filed with the Securities and Exchange Commission, or SEC. Moreover, we operate in a very competitive and rapidly changing environment, and new risks emerge from time to time. It is not possible for us to predict all risks, nor can we assess the impact of all factors on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements we may make. In light of these risks, uncertainties and assumptions, the forward-looking events and circumstances discussed in this Form 10-K may not occur, and actual results could differ materially and adversely from those anticipated or implied in our forward-looking statements.
You should not rely upon forward-looking statements as predictions of future events. Although we believe that the expectations reflected in our forward-looking statements are reasonable, we cannot guarantee that the future results, levels of activity, performance or events and circumstances described in the forward-looking statements will be achieved or occur. Moreover, neither we nor any other person assumes responsibility for the accuracy and completeness of the forward-looking statements. We undertake no obligation to update publicly any forward-looking statements for any reason after the date of this Form 10-K to conform these statements to actual results or to changes in our expectations, except as required by law.
You should read this Annual Report on Form 10-K and the documents that we reference in this Annual Report on Form 10-K and have filed with the SEC as exhibits hereto with the understanding that our actual future results and circumstances may be materially different from what we expect.
PART I
ITEM 1. BUSINESS
Our Company
Interlink Electronics, Inc. (“we”, “us”, “our”, “Interlink” or the “Company”) designs, develops, manufactures and sells a range of force-sensing technologies that incorporate our proprietary materials technology, firmware and software into a portfolio of standard products and custom solutions. These include sensor components, subassemblies, modules and products that support effective, efficient cursor control and novel three-dimensional user inputs. Our Human Machine Interface (“HMI”) technology platforms are deployed in a wide range of markets including consumer electronics, automotive, industrial, and medical. The application of our HMI technology platforms includes vehicle entry, vehicle multi-media control interface, rugged touch controls, presence detection, collision detection, speed and torque controls, pressure mapping, biological monitoring and others.
Interlink has been a leader in the printed electronics industry for over 35 years with the commercialization of our patented Force-Sensing Resistor (“FSR®”) technology that has enabled rugged and reliable HMI solutions. Our solutions have focused on handheld user input, menu navigation, cursor control, and other intuitive interface technologies for the world’s top electronics manufacturers.
We invented FSR® technology and pioneered commercialization of printed electronics manufacturing, paving the way for industry-wide adoption of force sensing technology. Our extensive knowledge and experience with this technology, along with the firmware we incorporate in our HMI solutions, differentiates us from other providers of HMI solutions. We, along with our customers, incorporate our FSR® and force sensing sensors and modules into end user products. Our sensors and modules are used in electronics devices and systems where user input must be converted into useful output data. Our force sensing technology solution platforms enabled industry-first implementations in gaming, smartphone, rugged notebook, automotive cockpit and automotive entry applications. Consumer and end-user demand for enhanced user experience is driving the need for innovative multi-modal HMI technologies and applications. Force sensing input provides a critical novel modality that drives a paradigm shift in HMI.
Market requirements for innovative solutions that enable smaller, thinner devices, lower power consumption, highly refined designs, better navigation and more intuitive usability in all environments, are also driving increased demand for our products. Industry is moving towards the use of multi-modal HMI in the home, industrial, medical and automotive spaces. Interlink delivers cutting edge, high performance HMI solutions for customers who wish to replace outdated switches and knobs in these environments.
4
Significant market opportunities are rapidly emerging for us to improve upon the functionality of standard capacitive sensors which are widely available and competitively priced. Inadvertent activation, where users unintentionally activate a control, is a common problem with capacitive technology. In contrast, force sensing solutions require a deliberate application of force to operate. We have had recent success in using our force sensing solutions in combination with capacitive technologies to minimize the latter’s performance issues, enabling force sensing solutions to complement competitive technologies and provide hybrid solutions and open up new opportunities for growth. We continue to simultaneously expand our standard product portfolio and develop new technology platforms to grow existing markets and capture emerging markets. This portfolio expansion will incorporate other complimentary sensing technologies. This broader portfolio of technologies will allow us to use our expertise in integrating multiple sensing technologies for applications in the rapidly growing Internet-of-Things (“IoT”).
Interlink serves our world-wide customer base from our corporate headquarters in Irvine, California (Orange County area) and from our facility in Camarillo, California (Ventura County). We have established a Global Product Development and Materials Science Center in our Camarillo footprint. This facility has a state-of-the-art printed electronics development laboratory as well as materials science lab. Our engineering team is based in this center where we work with our U.S. and global customers on developing, engineering, prototyping and implementing our advanced HMI and sensing solutions. We also maintain a small embedded software and IoT application development center in Singapore, and we expect to launch an engineering, research and development center in the United Kingdom in 2022. We manufacture all our products in our printed electronics manufacturing facility in Shenzhen, China, which has been in operation since 2006. In addition, we maintain a global distribution and logistics center in Hong Kong, a technical sales office in Japan, and several manufacturer representatives and distributors in strategic locations in our key markets, all of which allows us to support our global customer base. We sell our products in a wide range of markets, including consumer electronics, automotive, industrial and medical. Our customers are some of the world’s largest companies and most recognizable brands.
We were incorporated in California in 1985. In 1996, we re-incorporated into a Delaware corporation and, in 2012, we again changed our domicile from Delaware to Nevada by completing a merger with a newly formed Nevada corporation named Interlink Electronics, Inc.
Our principal executive office is located at 1 Jenner, Suite 200, Irvine, California 92618 and our telephone number is (805) 484-8855. Our website address is www.interlinkelectronics.com. Interlink makes available its annual financial statements, quarterly financial statements, and other significant reports and amendments to such reports, free of charge, on its website as soon as reasonably practicable after such reports are prepared.
Our Industry
HMI technologies have been available since the early 1970’s but were used almost exclusively in industrial products during the first 20 years of their existence. The introduction of touchpad mouse devices for laptop computers in the early 1990’s represented the first significant transition of HMI technologies into the consumer electronics market. Personal devices utilizing touch sensitive technology became ubiquitous in our daily human-machine interactions with the introduction in 2007 of smart phone technology incorporating capacitive touchscreens. As the smart phone became an integral part of consumers’ daily lives throughout the world, it influenced consumers’ expectations of how we should interact with all types of devices. Whether those devices are personal electronics, industrial and medical equipment, or automobiles, users of this equipment expect sleek, highly-functioning design including touch-sensing technology. Consumers no longer want to push buttons or flip switches; rather, they expect smooth touch pads and gesture-driven input. Engineers are responding to this demand by incorporating touch sensitive technology into a wide range of products, and any device that can utilize force and position sensing inputs to control or enhance its functionality is a candidate for use of the technology.
The products and solutions that we design, develop and manufacture for HMI and IoT applications are primarily printed electronic products. Printed electronics is an additive manufacturing technology used to create electrical devices on various substrates. For over 35 years we have honed and developed the processes necessary to manufacture high quality printed electronic products for HMI applications. Printed electronic technologies are emerging as potential low-cost replacements to silicon-based electronics in many specific application areas. As reported by industry analyst group IDTechEx, printed force sensors alone already account for approximately 30% of printed sensor market share, and by 2025, the projected market for all printed sensor components is expected to surpass $8 billion. According to the IDTechEx study Printed, Organic and Flexible Electronics 2020-2030: Forecasts, Technologies, Markets, the total market for printed, flexible, and organic electronics will grow from $41.2 billion in 2020 to $74 billion in 2030. The majority of that is OLEDs (organic but not printed) and conductive ink used for a wide range of applications, however, stretchable
5
electronics, logic and memory, thin film sensors have huge growth potential. As a member of OE-A, the Organic and Printed Electronics Association, we actively influence and contribute to the global landscape of printed electronics.
Internet-Of-Things -enabled intelligent sensing applications are gaining rapid commercial attention. Our sensing technology platforms are capable of providing the critical backbone for data sensing, measurement and analytics used in emerging wireless connectivity implementations in both short-range low-power wireless communications such as Bluetooth and long-range ultra low-power wireless communications such as LoRaWAN®.
Our Strategy
Our primary objective is to be the global leader and provider of multi-sensing based HMI technology solutions for the automotive, consumer electronics, medical and industrial automation markets. We also intend to utilize our role as a disruptive technology provider to bring our HMI solutions to new markets. To achieve our strategy, we intend to:
| ● | Expand our presence in the markets we occupy. We will continue to exploit new opportunities in the markets we occupy by leveraging our demonstrable success in the solutions we are providing today. |
| ● | Expand into new and emerging markets. We are bringing our highly-successful product lines and technologies to markets previously unaware of the opportunities provided by force-sensing and related technology solutions. |
| ● | Expand our presence with our current customers. We work with some of the world’s largest companies and most recognizable brands and are providing second and third generation turn-key solutions to meet their technology needs. We will continue to develop these existing relationships by working closely with our customers to understand how we can support their product and technology strategies and continue to be a trusted advisor. |
| ● | Pursue a multi-technology roadmap. We utilize multiple technologies in our HMI solutions, and we will continue to invest in research and development (“RD”) and expand our offerings to include resistive, piezo, capacitive and other emerging touch and sensing technologies. These will enable us to integrate our solutions and create the smart surfaces of the future. These may include haptic technology to enhance the user experience of these next generation technologies. |
| ● | Pursue inorganic growth opportunities. In connection with our growth strategy, we will continue to evaluate potential acquisitions that provide us with relevant new technologies to add to our “technology toolbox.” |
Our product development teams are skilled in concept definition, rapid prototyping, hardware and firmware development and integration support. Interlink benefits from its own world-class manufacturing facility in Shenzhen, China, allowing us to react quickly to customer needs, while ensuring the highest quality standards. We also maintain a technical sales force that can address new and existing customer opportunities worldwide. Our teams engage early in the development phase with our customers and we provide critical design inputs to ensure the solutions developed address the customer’s needs and meet their design goals and intent. We strive to solve our customers’ problems.
Our Technology Platforms and Products
Interlink was founded on the invention and commercialization of FSR® technology, the industry’s first force sensing solution using printed electronics manufacturing. As we transition from an FSR® sensor supplier to an HMI solutions provider, we pursue and embrace leading edge force sensing and related technology platforms. Our embedded software engineering team located in Singapore, along with our VP of Engineering Advanced Materials and our expanding materials science and engineering team in Camarillo, California, are focused on strategic technology roadmaps, development of scalable technology platform architectures and pursuit of synergistic technology partnerships. We also expect to launch an engineering, research and development center in the United Kingdom in 2022. In an ever changing and competitive landscape, we are committed to staying ahead of the technology curve.
The two primary types of user-input technologies common in today’s devices are capacitive and resistive. Capacitive sensors are used in the touch screens found in most smart phones and similar devices used globally by millions of consumers. The most significant drawback to the capacitive technology is its inability to measure force, although there has been some progress recently in enhancing the technology with pseudo force sensing. Capacitive sensors have become a high-volume, low-margin commodity product.
6
Our patented FSR® sensor technology consists of a bottom layer of conductor electrodes, a proprietary resistive material top layer and a separator between the two layers. An additional top layer that contains graphics and protects the sensor can also be added. FSR® sensors can be as thin as eight thousandths of an inch, making them particularly well suited for use where the design space is restricted, as in portable or wearable electronics. Our force sensing technology enables the sensor to be used for continuously variable control functions. For example, in a pointing device, increased pressure can be used to produce faster cursor movement. Unlike capacitive devices, an FSR® sensor’s performance is not impeded by the presence of moisture, dirt or dust, making the sensor suitable for use outdoors and in moist and other “hostile” environments. Our FSR® sensors have no moving parts, can be packaged in a sealed environment, and are low power and are less susceptible to false readings or unintended touches than capacitive sensors. We have developed sophisticated algorithms and firmware that allows our FSR® technology to become a complete solution delivering effective HMI functionality to our customers.
Custom Solutions
Interlink offers a comprehensive portfolio of standard solutions, from simple force sensors to multi-finger capable rugged trackpads. The largest part of our business, however, is the development and manufacture of custom solutions for our major customers. We offer full integration capability spanning initial concept to large volume manufacturing. Custom solutions can be a single or multi-technology platform to meet customer requirements and include both input and output technologies. We also offer full embedded firmware development and integration support. In many instances we work very closely with our OEM partners from the concept phase to ensure that our solutions are successfully integrated.
Standard Solutions
Our portfolio of standard solutions includes:
| ● | Our standard single zone FSR® sensors are the most versatile force sensing technology on the market today. These innovative sensors provide an inverse change in resistance in response to an increase or decrease in applied force. These provide engineers and designers with a durable, reliable, easy to measure, easy to integrate, thin-form factor and low-cost solution for HMI touch solutions and analog data capture for machines. FSR® sensors are available in a range of sizes, shapes and lengths and with several connection options. We also now offer them in different force sensing ranges, with the introduction of our FSR X® and FSR UX® range of standard sensors. These new sensors were developed in our material science development lab. |
| ● | Force sensing linear potentiometers (“FSLP”) are sensors which can be used for menu navigation and control. Our use of force allows for high rate scrolling and a more intuitive user experience. The FSLP is an easy to integrate, high resolution, ultra-low power-based solution that brings intuitive user controls to reduced form factor hand-held consumer electronic devices. These sensors are available in multiple lengths. We also offer a ring sensor for full 360-degree position sensing. These sensors are designed to be integrated into a device’s host processor without the need for a dedicated microprocessor. |
| ● | Our integrated mouse modules and pointing solutions can add touchpad or 360-degree pointing control to virtually any electronic device. Ranging from simple mouse button integration to NEMA rated (National Electrical Manufacturer Association) industrial pointing devices, these solutions are ideal for applications away from the desktop. The modules use FSR® technology and measurement firmware in a four-zone sensor or 4-wire resistive touchpad configuration along with a micro-controller to provide pressure sensitive cursor direction and speed control in a durable and easy to integrate form factor. |
| ● | Piezoelectric sensors are an upcoming addition to our standard sensor portfolio. After highly successful custom implementation in automotive applications, we have developed a set of standard piezo sensors and development kit which will be launched in 2022. These sensors are polymeric piezoelectric sensors with a wide range of applications and uses such as; dynamic strain gauges, impact/force sensors, vital signs sensors, motion sensors, vibration sensors, accelerometers as well as solid state rugged switches. Many of these diverse applications modes require extensive domain knowledge for successful integration. Our expertise in this area will allow us to be a trusted advisor to help our customers develop specialized solutions and solve their integration challenges. |
7
Intellectual Property
We believe that intellectual property protection is crucial to our business. We rely on a combination of patents, copyrights, trade secrets, trademarks, nondisclosure agreements with employees and third parties, licensing and other contractual agreements with third parties to protect our intellectual property. We maintain and support an active program to protect our intellectual property primarily through the filing of patent applications and the defense of issued patents against infringement. We are not currently engaged in any patent infringement suits. We implement a ring-fencing strategy of patenting core technology platforms related to sensors, sensing systems and human interface devices. This strategy is designed to provide a strong barrier against competition in our core sensor technologies while ensuring competitive advantages in applications of sensing systems and human machine interface devices in the event a competitor successfully circumvents the core sensor patents.
Our failure to obtain or maintain adequate protection for our intellectual property rights for any reason could hurt our competitive position. There is no guarantee that patents will be issued from the patent applications that we have filed or may file. Our issued patents may be challenged, invalidated or circumvented, and claims of our patents may not be of sufficient scope or strength, or issued in the proper geographic regions, to provide meaningful protection or any commercial advantage. See “Risk Factors” under Item 1A of this Form 10-K for further discussion of the risks associated with patents and intellectual property.
Our FSR® sensors are manufactured using proprietary screen-printing techniques. All proprietary aspects of the manufacturing process are currently conducted in-house at our U.S. and China manufacturing facilities to maintain quality and protect our force sensing technology from infringement. While screen-printing is a common process in various industries, the quality and precision of printing, as well as the specific processes required to make high-quality FSR® sensors, require considerable domain knowledge expertise and know how. We believe this expertise is difficult to replicate over the short term and, to our knowledge, no unrelated party has done so. As a result, we consider this expertise to be one of our more important trade secrets. We require our employees to sign nondisclosure agreements and seek to limit access to sensitive information to the greatest practical extent.
As of December 31, 2021, we held twenty-three (23) patents, and had fourteen (14) patents-pending. We group our patents into three general categories: sensors, which includes eight (8) patents expiring between 2022 and 2032; sensing systems, which includes four (4) patents expiring between 2029 and 2034; and human interface devices, which includes eleven (11) patents expiring between 2024 and 2036. Our intellectual property strategy involves filing patent applications in our strategic focus markets on a regular basis. We have also strengthened our patent portfolio to align with rapidly emerging market opportunities in IoT and smart surfaces. Our sensor fusion platform portfolio, for example, enables strategic pre-positioning in capturing intelligent multi-sensing applications including, for example, haptics. The will be enabled by emerging ultra low-power wireless technologies including WiFi, BLE, LoRaWAN®, as well as cellular technologies such as LTE-M and NB-IoT.
Competition
The markets for our products are highly competitive and subject to rapid advancement in design technology. We must identify and capture future market opportunities by developing and deploying value-added products.
We compete for market share based on our customers’ selection of our components over our competitors during the design phase of their products. Our ability to compete is dependent on the needs of our customers, how well our products address those needs, our corporate relationships, and a variety of other factors.
We offer a disruptive technology that is replacing outdated and undesirable approaches including switch technology. We often must convince companies to abandon older, proven but less elegant technologies and adopt our solutions. This change is supported by significant end-user demand for touch-sensitive solutions. We also compete against the highly commoditized capacitive sensing technology. However, our solutions are focused on providing functionality in situations where capacitive is not the appropriate solution, is unreliable or entirely unavailable. Our hybrid sensor fusion solutions better address our customers’ unique sensing and HMI challenges.
The markets for our products are characterized by significant price competition and we anticipate that our products will continue to face substantial pricing pressure. Our strategy of developing and offering more sophisticated solutions including smart surface for HMI applications will maintain our leading edge over our competitors.
8
Sales and Marketing
We sell our HMI solutions and force sensing devices through our direct sales employees as well as outside sales representatives and distributors. We work directly with large multi-national companies, small start-up companies, technology design houses and original equipment manufacturers (“OEMs”). Our sales personnel have extensive engineering backgrounds and receive substantial support from our internal engineering resources. Sales frequently result from interactions between senior management, design engineers, procurement departments, and our sales personnel. We interact with our customers throughout the product development and order process. We maintain sales offices in the United States and Japan. We primarily utilize Digi-Key Electronics, based in Thief River Falls, Minnesota, as a global, full-service distributor of our standard products. In addition to Digi-Key Electronics, we have several representative companies located in key markets so we can provide local support to strategic customers in these regions.
Due to the technical nature of our products, the length of our sales cycle can vary from a few months to several years and requires continued participation from our sales, engineering and management teams. Our sales cycle for our custom solutions generally includes the following two phases:
Design Opportunity to Design Win
| ● | Our sales and engineering team engages with the customer to establish the nature of the design and explore various technical applications that may fit the customer’s need. |
| ● | A customer might select one of our standard solutions or a custom design might be required to fulfill the customer’s product needs. Custom solutions might require engineering design fees and tooling costs. |
| ● | Product samples are provided to the customer and our team works with the customer to ensure product performance and address customer needs and specifications. |
| ● | A firm commitment from a customer’s engineering and/or purchasing organization or pre-production orders indicate a design win. In most cases, we are a sole-source supplier to our customer and cannot be easily and/or quickly replaced once the product goes into production. |
Mass Production
| ● | Once the customer has chosen our solution, they may move their product into the production phase. It may take several months or more to go from design win to production. Product lifespan varies dramatically depending on the marketplace and product. Consumer electronics may have a lifespan of six months to five years; industrial and automotive applications may continue for three to ten years, and medical product lifespans may continue past 20 years. |
Our Customers
Our customers include many of the world’s leading electronics companies. They encompass large multi-national organizations as well as start-ups, design houses, original design manufacturers, OEMs and universities. We supply some of the world’s largest consumer electronics manufacturers, luxury and mid-market car companies, familiar names in the medical and industrial equipment markets, research engineers and designers entering the IoT market, and companies of all different sizes in other markets.
Our customers generally do not provide us with firm, long-term volume purchase commitments, opting instead, to issue purchase orders that they can cancel, reduce, or delay at any time. In order to meet the expectations of our customers, we must provide innovative HMI solutions on a timely and cost-effective basis. This requires us to match our design and production capacity with customer demand, manage inventory, maintain satisfactory delivery schedules, and meet performance goals.
Our customer base is widely dispersed geographically. Sales to customers located outside the United States have historically accounted for a significant percentage of our revenues, a trend we expect to continue. On a bill-to basis, international sales constituted 71% and 59% of our net revenues for the years ended December 31, 2021 and 2020, respectively, with sales in 2021 to customers in China, Japan, and Taiwan accounting for 29%, 16%, and 12% of net revenues, respectively.
9
Future sales of our products will be based on, among other elements, expansion into adjacent markets, continued expansion of our product line, the acceptance of our product line, expansion into additional domestic and international markets, and our ability to maintain a competitive position against other technology providers.
For the year ended December 31, 2021, we had three customers that represented 17.0%, 14.7% and 14.7% of net revenues, respectively, and have been customers of ours for 8 years, 32 years, and 9 years, respectively. These same three customers represented 17.4%, 15.8% and 11.6% of net revenues for the year ended December 31, 2020.
Manufacturing Operations and Principal Suppliers
We have our own modern manufacturing facility of approximately 14,476 square feet in Shenzhen, China that is ISO 9001, ISO 14001 and ISO 13485 certified. We plan to start the process of acquiring IATF 16949 certification in 2022 as our automotive customer base expands. We work hard to meet current environmental and sustainability standards required by our customers and legislation in various geographic markets. All products are RoHS (Restriction of Hazardous Substances) and REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) compliant. We also monitor all of our suppliers to ensure that Conflict Minerals are eliminated from our supply chain.
We purchase our materials from outside suppliers. We carefully select suppliers based on their ability to provide quality parts and components that meet technical specifications. We actively monitor these suppliers, but we are subject to substantial risks associated with the performance of our suppliers. We source certain of our components from single-suppliers, including multinational conglomerates Henkel, DuPont, Solvay, SABIC and 3M, which increases the risk of shortages and shipment delays and decreases our ability to negotiate with that supplier. Many of our products are subject to qualification testing and approval by our customers, which includes approval of the materials used in a customer’s product. These single-source materials, however, are available from other suppliers, and while their procurement from other sources likely would necessitate additional approvals from our customers and might result in short-term disruption to our business, we do have options to purchase single-sourced materials from alternative suppliers should the need arise.
Engineering, Research and Development
Rapid advancements in process technologies and increasing levels of functional integration characterize the market for our products. We believe that our future success will depend largely on our ability to continue improving our products and our process technologies, and to develop or acquire new technologies.
In 2021, we launched our new Global Product Development and Materials Science Center in Camarillo, California, where our VP of Engineering Advanced Materials is located, along with other current and future resources. At this location, we focus on new product development including, among other areas, materials science and printed electronics. We also maintain a core embedded software engineering team in Singapore, and we expect to launch an engineering, research and development center in the United Kingdom in 2022.
We also operate an engineering center in our facility in Shenzhen, China, which is focused on sustaining engineering, customer support, quality control and new product introduction.
The global RD team pursues scientific research, technology platform development and advanced product development in areas of materials science, printed electronics devices and manufacturing processes, and multi-disciplinary system engineering. The global RD centers support strategic partnerships with key partners in electronics manufacturing services, digital manufacturing including 3D printing, and product development. This team also explores opportunities to work on government funded research projects that are aligned with our technology competencies.
Our Employees
As of December 31, 2021, we had 89 full-time employees worldwide. Our employees, listed in population size order from largest to smallest, are in the following departments: operations, RD, administration, and sales. Our ability to attract and retain qualified personnel is essential to our continued success. None of our employees are represented by a collective bargaining agreement. We believe our employee relations are good.
10
ITEM 1A. RISK FACTORS
Investing in our common stock involves a high degree of risk. You should carefully consider the risks and uncertainties described below, together with all of the other information in this Annual Report on Form 10-K, including our consolidated financial statements and related notes, before investing in our common stock. If any of the following risks materialize, our business, financial condition, results of operations and prospects could be materially and adversely affected. In that event, the price of our common stock could decline, and you could lose part or all of your investment.
Risks Specific to our Company
We have derived, and expect to continue to derive, a significant amount of revenue from a small number of customers.
Historically, we have earned, and believe that in the future we will continue to earn, a substantial portion of our revenue from a relatively small number of customers. In 2021, our top three customers accounted for 17.0%, 14.7% and 14.7% of our net revenues, respectively. If we were to either lose one of our major customers or have a major customer significantly reduce its volume of business with us, our business, results of operations and financial condition would be harmed unless we are able to replace such demand with other orders promptly. We expect to continue to be dependent on our major customers, the number and identity of which may change from period to period. Because our customers generally do not provide us with firm, long-term volume purchase commitments, our customers, including our largest customers upon whom we may become dependent, can reduce or terminate altogether their business with us at any time.
We rely on third parties for the materials that we use to manufacture our products and a shortage of supply could adversely affect our revenues, operating results and customer relationships.
We rely on third-party suppliers for the raw material components of our products. There are no assurances that our suppliers will be able to maintain an adequate supply of these raw materials to enable us to fulfill all of our customers’ orders on a timely basis. A failure to obtain an adequate supply of the materials for our products could increase our costs, cause us to fail to meet delivery commitments and cause our customers to purchase from our competitors, which could adversely affect our operating results and customer relationships. In some situations, we rely on a single supplier for raw material components of our products. Any disruption in these supplier relationships could prevent us from maintaining an adequate supply of materials and could adversely affect our results of operation and financial position.
Additionally, our sourcing operations may also be hurt by health concerns regarding the outbreak of viruses, widespread illness, infectious diseases, contagions and the occurrence of unforeseen epidemics (including the outbreak of the coronavirus and its potential impact on our financial results) in countries in which our products are manufactured. Moreover, negative press or reports about internationally manufactured products may sway public opinion, and thus customer confidence, away from our products. Furthermore, changes in U.S. trade policies, including new restrictions, tariffs or other changes could lead to additional costs, delays in shipments, embargos and other uncertainties that could negatively impact our relationships with our international suppliers and materially adversely affect our business. We experienced delays in the receipt of certain goods and the supply of our products from international and domestic shipping origins as a result of the COVID-19 pandemic and more general global supply chain constraints in fiscal 2021. Depending on the continued extent and duration of these constraints and disruptions, our supply chain, results of operations (including sales) or future business may be materially and adversely impacted. These and other issues affecting our international suppliers or internationally manufactured merchandise could have a material adverse effect on our business, results of operations and financial condition.
Disruptions in our manufacturing facilities or arrangements could cause our revenues and operating results to decline.
We currently manufacture the majority of our products in Shenzhen, China. This facility is vulnerable to damage from earthquakes, floods, fires, power loss and similar events. It could also be subject to break-ins, sabotage and intentional acts of vandalism. Our insurance may not cover such events and, if the event is covered, our insurance may not be sufficient to compensate us for any losses that may occur. Despite any precautions we may take, the occurrence of a natural disaster or other unanticipated problem at our manufacturing facility could result in delayed shipment of products, missed delivery deadlines and harm to our reputation, which may
11
cause our revenues and operating results to decline. Performance, reliability or quality problems with our products may cause our customers to reduce or cancel orders which would harm our operating results.
We regularly introduce new products with new technologies or manufacturing processes. Our products have in the past contained, and may in the future contain, errors or defects that may be detected at any point in the life of the product. Detection of such errors could result in delays in shipping and sales during the period required to correct such errors.
Defects may also result in product returns, loss of sales and cancelled orders, delays in market acceptance, injury to our reputation, injury to customer relationships and increased warranty costs, which could have an adverse effect on our business, operating results and financial condition.
In addition, events beyond our control, such as disruptions in operations due to natural or man-made disasters, inclement weather conditions, accidents, system failures, power outages, political instability (for example, the current conflict between Russia and Ukraine), physical or cyber break-ins, server failure, work stoppages, slowdowns or strikes by employees, acts of terrorism, the outbreak of viruses, widespread illness, infectious diseases, contagions and the occurrence of unforeseen epidemics (including the outbreak of the coronavirus and its potential impact on our financial results) and other unforeseen or catastrophic events, could damage our manufacturing facilities or our vendors’ fulfillment centers or render them inoperable, making it difficult or impossible for us or our vendors to process customer orders for an extended period of time. For example, in March 2022, China imposed a multi-day lockdown in the city of Shenzhen due to a rise in the number of coronavirus cases, which required factories to close and disrupted our manufacturing operations in that city. The war between Russia and Ukraine and the resulting political uncertainty also could result in an increase in cyberattacks that could either directly or indirectly impact our operations. Such events may also result in delays in our or our vendors’ receipt of inventory and the delivery of merchandise between our customers, our stores and/or our partners and our distribution center and our vendors’ fulfillment centers. We or our vendors could also incur significantly higher costs and longer lead times associated with distributing inventory during the time it takes for us or our vendors to reopen or replace our distribution center or any of their fulfillment centers.
We cannot guarantee that our HMI solutions for new markets will be successful or that we will be able to continue to generate significant revenue from these markets.
Our HMI solutions may not be successful in new markets despite the fact that these product solutions are capable of enabling people to interact more easily and intuitively with a wide variety of electronic devices. Various target markets for our interface solutions may develop slower than anticipated or could utilize competing technologies. The markets for certain of these products depend in part upon the continued development and deployment of wireless and other technologies, which may or may not address the needs of the users of these products.
Our ability to generate significant revenue from new markets will depend on various factors, including the following:
| ● | the development and growth of these markets; |
| ● | the ability of our technologies and product solutions to address the needs of these markets; |
| ● | the price and performance requirements of our customers and the preferences of end users; and |
| ● | our ability to provide our customers with HMI solutions that provide advantages in terms of size, power consumption, reliability, durability, performance, and value-added features compared with alternative solutions. |
The failure of any of these target markets to develop as we expect, or our failure to serve these markets to a significant extent, will impede our sales growth and could result in substantially reduced earnings. We cannot predict the size or growth rate of these markets or the market share we will achieve or maintain in these markets in the future.
If we fail to maintain and build relationships with our customers, or if our customers’ products which utilize our HMI solutions do not gain widespread market acceptance, our revenue may stagnate or decline.
12
We generally do not sell products to end-users. Instead, we sell component products that our customers incorporate into their products, and we depend on our customers to successfully manufacture and distribute products incorporating our component products and to generate consumer demand through their marketing and promotional activities. We do not control or influence the manufacture, promotion, distribution, or pricing of the products that incorporate our HMI solutions. As a result of this, our success depends almost entirely upon the widespread market acceptance of our customers’ products that incorporate our HMI solutions. Even if our technologies successfully meet our customers’ price and performance goals, our sales would decline or fail to develop if our customers do not achieve commercial success in selling their products that incorporate our HMI solutions.
Our customers generally do not provide us with firm, long-term volume purchase commitments, opting instead to issue purchase orders that they can cancel, reduce, or delay at any time. In order to meet the expectations of our customers, we must provide innovative HMI solutions on a timely and cost-effective basis. This requires us to match our design and production capacity with customer demand, maintain satisfactory delivery schedules, and meet performance goals. If we are unable to achieve these goals for any reason, our sales may decline or fail to develop, which would result in decreasing revenue.
If we are not able to protect our intellectual property or if we infringe on the intellectual property of others, our business and operating results could be adversely affected.
We consider our intellectual property to be a key element of our ability to compete in our chosen markets. We rely on a combination of patents, trade secrets and proprietary software to establish and protect our intellectual property rights. There is no assurance that patents will be issued from any of our pending applications or that any claims allowed from existing or pending patents will be sufficiently broad to protect our technology. We also cannot assure that any patents issued to us will not be challenged, invalidated or circumvented, or that the rights granted will provide proprietary protection. Litigation may be necessary to enforce our patents, trade secrets and other intellectual property rights, to determine the validity and scope of the proprietary rights of others or to defend against claims of infringement. Such litigation could result in substantial costs and diversion of resources and could have a material adverse effect on our business, regardless of the final outcome of the litigation.
Despite our efforts to maintain and safeguard our proprietary rights, there are no assurances that we will be successful in doing so or that our competitors will not independently develop or patent technologies that are substantially equivalent or superior to our technologies. If any of the holders of these patents assert claims that we are infringing them, we could be forced to incur substantial litigation expenses, and if we were found to be infringing on someone else’s patent, we could be required to pay substantial damages, pay royalties in the future or be enjoined from infringing in the future.
Our success depends in part on our CEO and CFO, who simultaneously lead other public corporations.
Steven N. Bronson, our Chairman of the Board, President and Chief Executive Officer, and Ryan J. Hoffman, our Chief Financial Officer, simultaneously serve as officers and, in the case of Mr. Bronson, a director, of Qualstar Corporation (OTCMKTS: QBAK) and BKF Capital Group, Inc. (OTCMKTS: BKFG). Mr. Bronson serves as President and Chief Executive Officer and as a director of Qualstar Corporation and as Chairman of the Board and Chief Executive Officer for BKF Capital Group, Inc., and Mr. Hoffman serves as Chief Financial Officer of each of Qualstar Corporation and BKF Capital Group, Inc.
As a result, each of Messrs. Bronson and Hoffman divides his time among these companies and does not devote his full business time and attention to Interlink’s business. Each of Messrs. Bronson and Hoffman currently works an equivalent full-time schedule for Interlink; however, there can be no assurance that the amount of time these officers devote to our company will not diminish from time to time for limited or extended periods as their other business obligations require a greater portion of their attention. Neither Mr. Bronson nor Mr. Hoffman is required to spend a minimum amount of time on Interlink business. Our continued success depends in part upon the availability and performance of these officers, particularly Mr. Bronson, who possesses unique and extensive industry knowledge and experience as well as a deep understanding of our business and strategy. A reduction in their services to Interlink from current levels due to obligations to Qualstar Corporation, BKF Capital Group, Inc. or other organizations with which these officers are affiliated could have a disruptive effect, adversely impacting our ability to manage our business effectively and execute our business strategy.
13
Risks Related to Our Industry
If we are unable to keep pace with rapid technological change and gain market acceptance of new products, we may not be able to compete effectively.
Technology, both in our markets and in our customers’ markets, is undergoing rapid change. In order to maintain our leadership position in our existing markets and to emerge as a leader in new markets, we will have to maintain a leadership position in the technologies supporting those markets. Doing so will require, among other things, that we accomplish the following:
| ● | accurately predict the evolving needs of our customers and develop, in a timely manner, the technology required to support those needs; |
| ● | provide products that are not only technologically sophisticated and well supported but are also available at a price within market tolerances and competitive with comparable products; |
| ● | establish and effectively defend our ownership on the intellectual property supporting our products; and |
| ● | enter into relationships with other companies that have developed complementary technology on which our products also depend. |
There is no assurance that we will be able to achieve any of these objectives.
Our markets are intensely competitive and many of our potential competitors have resources that we lack.
Our markets are competitive, and we expect competition in our newer markets to increase. Our competitors include companies with similar products or technologies, companies that sell complementary products to our target markets and our customers themselves, who could choose to manufacture products that they currently buy from us. Our competitors and potential competitors may have established business relationships that afford them a competitive advantage or may create technologies that are superior to ours or that set a new industry standard that will define the successful product for that market. If any of our competitors establish a close working relationship with our customers, they may obtain advance knowledge of our customers’ technology choices or may be afforded an opportunity to work in partnership to develop compatible technologies and may therefore achieve a competitive advantage. We may be unable to compete successfully against our current and future competitors.
We face risks associated with security breaches or cyber-attacks.
We face risks associated with security breaches or cyber-attacks of our computer systems or those of our third-party representatives, vendors, and service providers. The war between Russia and Ukraine and the resulting political uncertainty could result in an increase in cyberattacks that could either directly or indirectly impact our operations. Although we have implemented security procedures and controls to address these threats, our systems may still be vulnerable to data theft, computer viruses, programming errors, attacks by third parties, or similar disruptive problems. If our systems, or systems owned by third parties affiliated with our company, were breached or attacked, the proprietary and confidential information of our company and our customers could be disclosed and we may be required to incur substantial costs and liabilities, including the following:
| ● | expenses to rectify the consequences of the security breach or cyber-attack; |
| ● | liability for stolen assets or information; |
| ● | costs of repairing damage to our systems; |
| ● | lost revenue and income resulting from any system downtime caused by such breach or attack; |
| ● | loss of competitive advantage if our proprietary information is obtained by competitors as a result of such breach or attack; |
14
| ● | increased costs of cyber security protection; |
| ● | costs of incentives we may be required to offer to our customers or business partners to retain their business; and |
| ● | damage to our reputation. |
In addition, any compromise of security from a security breach or cyber-attack could deter customers or business partners from entering into transactions that involve providing confidential information to us. As a result, any compromise to the security of our systems could have a material adverse effect on our business, reputation, financial condition, and operating results.
Risks Relating to Ownership of Our Stock
There is a limited or no public market for our securities.
Our common stock is quoted on The Nasdaq Capital Market, where the daily trading volume has been limited. This is due in part to the significant percentage (approximately 83% as of December 31, 2021) of our shares that are held by officers and directors and their affiliates.
We cannot predict the extent to which investor interest in our Company will lead to the development of an active trading market or how liquid that market might become. The lack of an active market may reduce the value of shares of our common stock and impair the ability of our stockholders to sell their shares at the time or price at which they wish to sell them. An inactive market may also impair our ability to raise capital by selling our common stock and may impair our ability to acquire or invest in other companies, products, or technologies by using our common stock as consideration.
The price of our common stock may be volatile, and the value of a stockholder’s investment could decline.
Technology stocks have historically experienced high levels of volatility. The trading price of our common stock may fluctuate substantially, depending on many factors, some of which are beyond our control and may not be related to our operating performance. These fluctuations could cause investors to lose all or part of their investment in our common stock. Factors that could cause fluctuations in the trading price of our common stock include the following:
| ● | announcements of new offerings, products, services or technologies, commercial relationships, acquisitions or other events by us or our competitors; |
| ● | price and volume fluctuations in the overall stock market from time to time; |
| ● | significant volatility in the market price and trading volume of technology companies in general; |
| ● | fluctuations in the trading volume of our shares or the size of our public float; |
| ● | actual or anticipated changes or fluctuations in our results of operations; |
| ● | failure of our results of operations to meet the expectations of securities analysts or investors; |
| ● | actual or anticipated changes in the expectations of investors or securities analysts; |
| ● | litigation involving us, our industry, or both; |
| ● | regulatory developments in the United States, foreign countries, or both; |
| ● | general economic conditions and trends; |
15
| ● | major catastrophic events; |
| ● | lockup releases, sales of large blocks of our common stock; |
| ● | the impact of outbreaks, and threat or perceived threat of outbreaks, of epidemics and pandemics, including, without limitation, the coronavirus outbreak, on our sourcing and manufacturing operations as well as consumer spending; |
| ● | departures of key employees; or |
| ● | an adverse impact on the company from any of the other risks cited herein. |
In addition, if the market for technology stocks or the stock market, in general, experience a loss of investor confidence, the trading price of our common stock could decline for reasons unrelated to our business, results of operations or financial condition. The trading price of our common stock might also decline in reaction to events that affect other companies in our industry even if these events do not directly affect us. In the past, following periods of volatility in the market price of a company’s securities, securities class action litigation has often been brought against that company. If our stock price is volatile, we may become the target of securities litigation. Securities litigation could result in substantial costs and divert our management’s attention and resources from our business. This could have a material adverse effect on our business, results of operations and financial condition.
The liquidation preference of the shares of our Series A Convertible Preferred Stock would reduce the amount available to our common stockholders in the event of our liquidation or winding up.
Holders of our Series A Convertible Preferred Stock have a liquidation preference equal to the greater of $25.00 per share plus any accrued and unpaid dividends, and such amount per share as would have been payable had all shares of Series A Convertible Preferred Stock been converted into our common stock in the event of our liquidation or winding up. This means that those holders are entitled to receive the liquidation preference before any payment or other distribution of assets to our common stockholders, and the amount of any such payment or other distribution will be reduced by that amount.
The issuance of shares of common stock upon conversion of the Series A Convertible Preferred Stock may cause immediate and substantial dilution to our existing stockholders.
Our Series A Convertible Preferred Stock is presently convertible into 400,000 shares of common stock. The issuance of shares of common stock upon conversion of shares of our Series A Convertible Preferred Stock will result in dilution to the interests of other common stockholders.
Certain provisions in our Series A Convertible Preferred Stock may impact our ability to obtain additional financing in the future.
In addition to cash flows generated from operations, we may need to raise capital in the future through the issuance of capital stock. In order to issue any class of capital stock or series of preferred stock the terms of which expressly provide that such class or series will rank on parity with or senior to the Series A Convertible Preferred Stock upon our liquidation, winding-up or dissolution, we must obtain the affirmative consent of holders of a majority of the then-outstanding shares of our Series A Convertible Preferred Stock. If we are unable to obtain the consent of these stockholders in connection with future financings, we would be unable to issue capital stock that is on parity with or senior to the Series A Convertible Preferred Stock, which may prevent us from raising additional capital on acceptable terms, or at all.
If securities or industry analysts do not publish research or reports about our business, or publish inaccurate or unfavorable research reports about our business, our share price and trading volume could decline.
The trading market for our common stock, to some extent, depends on the research and reports that securities or industry analysts publish about us or our business. We do not have any control over these analysts. If one or more of the analysts who cover us should downgrade our shares or change their opinion of our business prospects, our share price would likely decline. If one or more of these analysts ceases coverage of our company or fails to regularly publish reports on us, we could lose visibility in the financial markets, which could cause our share price or trading volume to decline.
16
Raising additional capital may cause dilution to our existing stockholders, restrict our operations or require us to relinquish rights to our product candidates on unfavorable terms to us.
We may seek additional capital through a variety of means, including through private and public equity offerings and debt financings. To the extent that we raise additional capital through the sale of equity or convertible debt securities, ownership interest will be diluted, and the terms may include liquidation or other preferences that adversely affect stockholder rights. Debt financing, if available, may involve agreements that include covenants limiting or restricting our ability to take certain actions, such as incurring additional debt, making capital expenditures or declaring dividends. If we raise additional funds from third parties, we may have to relinquish valuable rights to our technologies or product candidates, or grant licenses on terms that are not favorable to us. If we are unable to raise additional funds through equity or debt financing when needed, we may be required to delay, limit, reduce or terminate our product development or commercialization efforts for our product candidates, or we may need to grant to others the rights to develop and market product candidates that we would otherwise prefer to develop and market ourselves.
Our CEO has control over key decision making as a result of his control of a majority of our voting stock.
Steven N. Bronson, our Chairman of the Board, President and Chief Executive Officer, beneficially owns approximately 82.5% of the outstanding shares of our common stock as of December 31, 2021. As a result, Mr. Bronson has the ability to control the outcome of matters submitted to our stockholders for approval, including the election of directors and any merger, consolidation, or sale of all or substantially all of our assets. In addition, Mr. Bronson has the ability to control the management and affairs of our company as a result of his position as our CEO and his ability to control the election of our directors. As a board member and officer, Mr. Bronson owes a fiduciary duty to our stockholders and must act in good faith in a manner he reasonably believes to be in the best interests of our stockholders. As a stockholder, Mr. Bronson may have interests that differ from yours and he may vote in a manner that is adverse to your interests. This concentration of ownership may have the effect of deterring, delaying or preventing a change of control of our company, could deprive our stockholders of an opportunity to receive a premium for their common stock as part of a sale of our company and might ultimately affect the market price of our common stock.
We do not intend to pay dividends on our common stock for the foreseeable future and, consequently, our common stockholders’ ability to achieve a return on their investment will depend on appreciation in the price of our common stock.
We have never declared or paid cash dividends on our common stock, and we do not anticipate paying any dividends on our common stock in the foreseeable future, if at all. The declaration, amount and payment of any future dividends on shares of our common stock, if any, is subject to the designations, rights and preferences of the Series A Convertible Preferred Stock and will be at the sole discretion of our board of directors, which may take into account general and economic conditions, our financial condition and results of operations, our available cash and current and anticipated cash needs, capital requirements, contractual, legal, tax and regulatory restrictions, the implications of the payment of dividends by us to our stockholders or by our subsidiaries to us, and any other factors that our board of directors may deem relevant. As a result, stockholders may only receive a return on their investment in our common stock if the market price of our common stock increases.
Our charter documents and Nevada law could discourage takeover attempts and lead to management entrenchment.
Our articles of incorporation and bylaws contain provisions that could delay or prevent a change in control of our company. These provisions could also make it difficult for stockholders to take other corporate actions, including effecting changes in our management. These provisions include:
| ● | the ability of our board of directors to issue shares of preferred stock and to determine the price and other terms of those shares, including preferences and voting rights, without stockholder approval, which could be used to significantly dilute the ownership of a hostile acquirer; |
| ● | the exclusive right of our board of directors to elect a director to fill a vacancy created by the expansion of our board of directors or the resignation, death or removal of a director, which prevents stockholders from being able to fill vacancies on our board of directors; |
| ● | the requirement that a special meeting of stockholders may be called only by our board of directors, by majority vote, or by any shareholder or group of shareholders who own and have the right to vote more than 25% of our issued and |
17
| outstanding securities, which could delay the ability of our stockholders to force consideration of a proposal or to take action, including the removal of directors; and |
| ● | the ability of our board of directors, by majority vote, to amend our bylaws, which may allow our board of directors to take additional actions to prevent an unsolicited takeover and inhibit the ability of an acquirer to amend our amended and restated bylaws to facilitate an unsolicited takeover attempt. |
We also are subject to provisions of Nevada law found in Nevada Revised Statutes, Sections 78.411 to 78.444, inclusive, that prohibit us from engaging in any business combination with any “interested stockholder,” meaning generally that a stockholder who beneficially owns 10 percent (10%) or more of our stock, cannot acquire us for a period of time after the date this person became an interested stockholder, unless various conditions are met, such as approval of the transaction by our board of directors and stockholders.
Risks Related to Government Regulation
Our failure to comply with U.S. laws and regulations relating to the export and import of goods, technology, and software could subject us to penalties and other sanctions and restrict our ability to license and develop our circuit designs.
We are obligated by law to comply with all U.S. laws and regulations governing the export and import of goods, technology, and services, including the International Traffic in Arms Regulations (“ITAR”), the Export Administration Regulations (“EAR”), regulations administered by the Department of Treasury’s Office of Foreign Assets Control, and regulations administered by the Bureau of Alcohol Tobacco Firearms and Explosives governing the importation of items on the U.S. Munitions Import List. Pursuant to these regulations, we are responsible for determining the proper licensing jurisdiction and export classification of our products, and obtaining all necessary licenses or other approvals, if required, for exports and imports of technical data, and software, or for the provision of technical assistance or other defense services to or on behalf of foreign persons. We are also required to obtain export licenses, if required, before employing or otherwise utilizing foreign persons in the performance of our contracts if the foreign person will have access to export-controlled technical data or software. The violation of any of the applicable laws and regulations could subject us to administrative, civil, and criminal penalties.
These regulations could restrict our ability to sell products and develop new products. Changes in our products or changes in export and import regulations may create delays in the introduction of our products in international markets, prevent our customers with international operations from deploying products incorporating our products throughout their global systems or, in some cases, prevent the export or import of products that include our products to certain countries altogether. Any change in export or import regulations or related legislation, shift in approach to the enforcement or scope of existing regulations, or change in the countries, persons, or technologies targeted by such regulations, could result in decreased use of our products by, or our ability to export or license our products to, existing or potential customers with international operations and decreased revenue. Additionally, failure to comply with these laws could result in sanctions by the U.S. government, including substantial monetary penalties, denial of export privileges, and debarment from government contracts.
If we fail to comply with anti-bribery laws, including the U.S. Foreign Corrupt Practices Act (“FCPA”), we could be subject to civil and/or criminal penalties.
As a result of our international operations, we may be subject to anti-bribery laws, including the FCPA, which prohibits companies from making improper payments to foreign officials for the purpose of obtaining or keeping business. If we fail to comply with these laws, the U.S. Department of Justice, the SEC, or other U.S. or foreign governmental authorities could seek civil and/or criminal sanctions, including monetary fines and penalties against us or our employees, as well as additional changes to our business practices and compliance programs, which could have a material adverse effect on our business, results of operations, or financial condition.
We cannot provide any assurance that current environmental laws and product quality specification standards, or any laws or standards enacted in the future, will not have a material adverse effect on our business.
Our operations are subject to environmental and various other regulations in each of the jurisdictions in which we conduct business. Regulations have been enacted in certain jurisdictions which impose restrictions on waste disposal of electronic products and
18
electronics recycling obligations. If we fail to comply with applicable rules and regulations in connection with the use and disposal of such substances or other environmental or recycling legislation, we could be subject to significant liability or loss of future sales.
General Risks
The ongoing, global coronavirus pandemic has significantly and adversely affected, and may continue to adversely affect, our business, financial position, results of operations, and cash flows.
The outbreak of the novel coronavirus (which causes the disease now known as COVID-19) was first identified in December 2019 in Wuhan, China, and has since spread rapidly across the world, including in all or most of the countries in which we, our clients, and our suppliers operate. The COVID-19 pandemic has caused, and is expected to continue to cause, a global slowdown in economic activity, a decrease in demand for a broad variety of goods and services, disruptions in global supply chains, and significant volatility and disruption of financial markets. Because the severity, magnitude and duration of the pandemic and its economic consequences are uncertain, vary by region, are rapidly changing and difficult to predict, its full impact on our operations and financial performance, as well as its impact on our near-term ability to successfully execute our strategic objectives, remains similarly uncertain and difficult to predict. Further, the pandemic’s ultimate impact depends in part on many factors not within our control and which may vary by region (heightening the uncertainty as to the ultimate impact COVID-19 may have on our operations and financial performance), including, without limitation: restrictive governmental and business actions that have been and continue to be taken in response (including travel restrictions, work from home requirements, and other workforce limitations); economic stimulus, funding and relief programs and other governmental economic responses; the effectiveness of governmental actions; economic uncertainty in key global markets and financial market volatility; levels of economic contraction or growth; the impact of the pandemic on health and safety; the pace of recovery if and when the pandemic subsides; and how significantly the number of cases increases as economies begin to open and restrictive governmental and business actions are relaxed.
Further, the COVID-19 pandemic has recently subjected our operations and financial performance to several risks, including those discussed below:
| ● | Operations-related risks: Our business is facing increased operational challenges including a heightened need to protect employee health and safety, office shutdowns, workplace disruptions, and restrictions on the movement of people, both at our own offices and at those of our clients and suppliers. We have also experienced lower demand and volume for products and services, client requests for engagement deferrals or other contract modifications, and other factors related directly and indirectly to the COVID-19 pandemic that adversely impact our business. While these factors have begun to decline and projected demand for our products has stabilized, there can be no assurance that we will not again experience significant declines in product sales due to COVID-19. |
| ● | Client-related risks: Our clients have been and will continue to be disrupted by quarantines and restrictions on employees’ ability to work and office closures. Such disruptions have and may continue to restrict our ability to provide products and services to our clients and have also and may continue to reduce demand for our products and services. In addition, COVID-19 has adversely affected the global economy and the economies and financial markets of many countries, which may result in further economic downturn that could affect demand for our products and services and impact our operations. |
| ● | Employee-related risks: We have experienced and expect to continue to experience disruptions to our operations resulting from quarantines, self-isolations, or other movement and restrictions on the ability of our employees to perform their jobs that may impact our ability to deliver our products and services in a timely manner or meet milestones or customer commitments. |
The full extent of the effect of the pandemic on us, our customers, our supply chain and our business will depend on future developments, which are highly uncertain and cannot be predicted with confidence, including the duration and severity of the outbreak or subsequent outbreaks. We may continue to experience the effects of the pandemic even after it has waned, and our business, results of operations and financial condition could continue to be affected. In particular, if COVID-19 continues to spread or re-emerges, particularly in the United States, Singapore and China where our operations are most concentrated, resulting in a prolonged period of travel, commercial, social and other similar restrictions, we could experience, among other things:
19
| ● | Adverse impacts on our operations and financial results caused by government and regulatory measures to contain or mitigate the spread of the virus, temporary closures of our facilities or the facilities of our customers or suppliers, which could impact our ability to timely meet our customers’ orders or negatively impact our supply chain; |
| ● | The failure of third parties on which we rely, including our suppliers, customers and external business partners, to meet their respective obligations to us, or significant disruptions in their ability to do so, which may be caused by their own financial or operational difficulties including bankruptcy or default; |
| ● | Disruptions or restrictions on our employees’ ability to work effectively, due to illness, quarantines, travel bans, shelter-in-place orders or other limitations; |
| ● | Interruptions to the operations of our business if the health of our executives, management personnel and other employees are affected, particularly if a significant number of individuals are impacted; |
| ● | Any accident, COVID-19 illness, or injury to our employees could result in litigation, manufacturing delays and harm to our reputation, which could negatively affect our business, results of operations and financial condition; |
| ● | Changes in prices of products and services may be impacted by worldwide demand and by the ongoing COVID-19 pandemic, and such price increases could materially increase our operating costs and adversely affect our profit margin; |
| ● | Increased cybersecurity and privacy risks and risks related to the reliability of technology to support remote operations; |
| ● | Sudden and/or severe declines in the market price of our common stock; and |
| ● | Costs incurred and revenues lost during and from the effects of the COVID-19 pandemic likely will not be recoverable. |
The COVID-19 pandemic may also affect our operations and financial results in a manner that is not presently known to us or that we currently do not expect to present significant risks to our operations or financial results.
If we fail to manage change successfully, our operations could be adversely impacted and our business could be impaired.
The ability to operate our business in rapidly evolving markets requires an effective planning and management process. We expect that responding to changes in our business will place a significant strain on our personnel, management systems, infrastructure and other resources. Our ability to manage change effectively will require us to attract, train, motivate and manage new employees, to reallocate human and other resources to support new undertakings and to restructure our operations to manage a restructured business effectively. If we are unable to respond effectively to change, our operations could be adversely affected and our business could be impaired.
International sales and manufacturing risks could adversely affect our operating results.
Our revenue from international sales represents a substantial portion of our overall sales, and this trend will continue for the foreseeable future. The majority of our manufacturing is currently performed in China. Our international operations involve a number of risks, including with respect to:
| ● | import-export license agreements, tariffs, taxes and other trade barriers; |
| ● | staffing and managing foreign operations; |
| ● | securing credit and funding; |
| ● | maintaining an effective system of internal controls at our foreign facilities; |
| ● | collecting foreign receivables; |
20
| ● | transfer pricing and other tax uncertainties; |
| ● | currency exchange fluctuations; |
| ● | reduced protection of intellectual property rights; |
| ● | the impact of outbreaks, and threat or perceived threat of outbreaks, of epidemics and pandemics, including, without limitation, the coronavirus outbreak, on our sourcing and manufacturing operations as well as consumer spending; |
| ● | political and economic instability, and terrorism; and |
| ● | transportation risks. |
Any of the above factors could adversely affect our operating results.
We expect to make acquisitions, which could involve certain risks and uncertainties.
We expect to make acquisitions in the future. Acquisitions involve numerous inherent challenges, such as properly evaluating acquisition opportunities, properly evaluating risks and other diligence matters, ensuring adequate capital availability and balancing other resource constraints. There are risks and uncertainties related to acquisitions, including: difficulties integrating acquired technology, operations, personnel and financial and other systems; unrealized sales expectations from the acquired business; unrealized synergies and cost savings; unknown or underestimated liabilities; diversion of management attention from running our existing businesses and potential loss of key management employees of the acquired business. In addition, internal controls over financial reporting of acquired companies may not be up to required standards. Our integration activities may place substantial demands on our management, operational resources and financial and internal control systems. Customer dissatisfaction or performance problems with an acquired business, technology, service or product could also have a material adverse effect on our reputation and business.
Our ability to operate effectively could be impaired if we were to lose the services of key personnel, or if we are unable to recruit qualified managers and key personnel in the future.
Our success is substantially dependent on the continued availability of our key management and technical personnel. Several of our key management personnel have been with us throughout most of our history and have substantial experience with our business and technology. If one or more of our key management personnel leaves Interlink and we are unable to find a replacement with the combination of skills and attributes necessary to execute our business plan, it may have an adverse impact on our business. Our success will also depend, in part, on our ability to attract and retain additional qualified professional, technical, production, managerial and marketing personnel, both domestically and internationally.
We are required to evaluate our internal control over financial reporting under Section 404 of the Sarbanes-Oxley Act of 2002, and any adverse results from such evaluation could result in a loss of investor confidence in our financial reports and have an adverse effect on our stock price.
Pursuant to Section 404 of the Sarbanes-Oxley Act of 2002, we are required to furnish a report by our management on our internal control over financial reporting. Such report contains, among other matters, an assessment of the effectiveness of our internal control over financial reporting as of the end of our fiscal year, including a statement as to whether or not our internal control over financial reporting is effective. This assessment must include disclosure of any material weaknesses in our internal control over financial reporting identified by management. If we are unable to assert that our internal control over financial reporting is effective, we could lose investor confidence in the accuracy and completeness of our financial reports, which could have an adverse effect on our stock price.
As a non-accelerated filer, we are required to evaluate and report on the effectiveness of our internal control over financial reporting. Our independent registered public accounting firm is not required to attest to the effectiveness of our internal control over financial reporting; however, our independent registered public accounting firm may communicate to us if they are not satisfied with the level
21
at which our controls are documented, designed or operating. Our remediation efforts may not enable us to avoid a material weakness in the future.
The requirements of being a public company may strain our resources, divert our management’s attention and affect our ability to attract and retain qualified board members.
As a public company, we will be subject to the reporting requirements of the Exchange Act, and will be required to comply with the applicable requirements of the Sarbanes-Oxley Act and the Dodd-Frank Wall Street Reform and Consumer Protection Act, the listing requirements of the securities exchange on which our common stock is traded and other applicable securities rules and regulations. Compliance with these rules and regulations will increase our legal and financial compliance costs, make some activities more difficult, time-consuming or costly and increase demand on our systems and resources. Among other things, the Exchange Act requires that we file annual, quarterly and current reports with respect to our business and results of operations and maintain effective disclosure controls and procedures and internal controls over financial reporting. In order to maintain and improve our disclosure controls and procedures and internal controls over financial reporting to meet this standard, significant resources and management oversight is required. As a result, management’s attention may be diverted from other business concerns, which could harm our business and results of operations. We may need to hire additional employees to comply with these requirements, which will increase our costs and expenses.
In addition, being a public company subject to these rules and regulations make it more expensive for us to obtain director and officer liability insurance, and we may be required to accept reduced coverage or incur substantially higher costs to obtain coverage. These factors could also make it more difficult for us to attract and retain qualified executive officers and qualified members of our board of directors, particularly to serve on our audit committee and compensation committee.
ITEM 1B. UNRESOLVED STAFF COMMENTS
None.
ITEM 2. PROPERTIES
We maintain our principal office, totaling approximately 4,351 square feet, in Irvine, California, under a sub-lease that expires in May 2023. We also conduct engineering, assembly and prototyping capabilities in Camarillo, California, where we established a Global Product Development and Materials Science Center. We maintain additional leased spaces in several locations, including a production facility in Shenzhen, China, a satellite embedded electronics lab in Singapore, and regional offices in Hong Kong, Tokyo, and various other locations in the United States. In total, we lease approximately 23,000 square feet, and do not own any real estate. We believe that our facilities are adequate to meet our needs for the immediate future, and that, should it be needed, we will be able to secure additional space to accommodate any expansion of our operations.
ITEM 3. LEGAL PROCEEDINGS
We are not party to any material legal proceedings. We may, from time to time, be party to litigation and subject to claims incident to the ordinary course of business. As our growth continues, we may become party to an increasing number of litigation matters and claims. The outcome of litigation and claims cannot be predicted with certainty, and the resolution of any future matters could materially affect our future financial position, results of operations or cash flows.
ITEM 4. MINE SAFETY DISCLOSURES
Not applicable.
22
PART II
ITEM 5. MARKET FOR REGISTRANTS’ COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
Market Information for Common Stock
Our common stock is listed on The Nasdaq Capital Market under the symbol “LINK.”
Holders of Record
As of December 31, 2021, we had 26 holders of record of our common stock. The actual number of stockholders is greater than this number of record holders and includes stockholders who are beneficial owners but whose shares are held in street name by brokers and other nominees.
Dividend Policy
Common Stock
We have never declared or paid cash dividends on our common stock, and we do not anticipate paying any dividends on our common stock in the foreseeable future, if at all. The declaration, amount and payment of any future dividends on shares of our common stock, if any, is subject to the designations, rights and preferences of the Series A Convertible Preferred Stock and will be at the sole discretion of our board of directors, which may take into account general and economic conditions, our financial condition and results of operations, our available cash and current and anticipated cash needs, capital requirements, contractual, legal, tax and regulatory restrictions, the implications of the payment of dividends by us to our stockholders or by our subsidiaries to us, and any other factors that our board of directors may deem relevant.
Series A Convertible Preferred Stock
We have 200,000 shares of our Series A Convertible Preferred Stock outstanding, each of which currently is convertible into two shares of our common stock. The designations, rights and preferences of our Series A Convertible Preferred Stock provide that we will pay, when, as and if declared by our board of directors, monthly cumulative cash dividends at an annual rate of 8.0%, which is equivalent to $0.16667 per month and $2.00 per annum per share, based on the $25.00 liquidation preference. Dividends on the Series A Convertible Preferred Stock will accrue daily and be cumulative from, and including, the first day of the calendar month in which the shares are issued and will be payable monthly in arrears on the 15th day of each calendar month. Our board of directors commenced paying dividends on our Series A Convertible Preferred Stock in November 2021, and we expect that our board of directors will continue to declare and pay monthly cash dividends on our Series A Convertible Preferred Stock, subject to the limitations to do so under Nevada law.
Purchases of Equity Securities by the Issuer and Affiliated Purchasers
None.
Recent Sales of Unregistered Securities
None.
ITEM 6. RESERVED
23
ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
You should read the following discussion and analysis of our financial condition and results of operations in conjunction with the consolidated financial statements and the related notes to the consolidated financial statements included later in this Annual Report on Form 10-K. In addition to historical financial information, the following discussion contains forward-looking statements that reflect our plans, estimates, beliefs and expectations that involve risks and uncertainties. Our actual results and the timing of events could differ materially from those discussed in these forward-looking statements. Factors that could cause or contribute to these differences include those discussed below and elsewhere in this Annual Report on Form 10-K, particularly in “Risk Factors” and “Special Note Regarding Forward-Looking Statements.”
Overview
Interlink Electronics, Inc. designs, develops, manufactures and sells a range of force-sensing technologies that incorporate our proprietary materials technology, firmware and software into a portfolio of standard products and custom solutions. These include sensor components, subassemblies, modules and products that support effective, efficient cursor control and novel three-dimensional user inputs. Our HMI technology platforms are deployed in a wide range of markets including consumer electronics, automotive, industrial, and medical. The application of our HMI technology platforms includes vehicle entry, vehicle multi-media control interface, rugged touch controls, presence detection, collision detection, speed and torque controls, pressure mapping, biological monitoring and others.
Interlink has been a leader in the printed electronics industry for 35 years with the commercialization of our patented FSR® technology that has enabled rugged and reliable HMI solutions. Our solutions have focused on handheld user input, menu navigation, cursor control, and other intuitive interface technologies for the world’s top electronics manufacturers.
We sell our products globally to a diverse array of customers that include the Fortune 500 as well as start-ups, design houses, original design manufacturers, OEMs and universities. Our technology has been deployed in the consumer electronics, industrial automation, automotive and medical markets. Our global presence in the United States, China, Hong Kong, Singapore and Japan, allows us to provide local sales and engineering support services to our existing and future customers. Our products are manufactured by our wholly-owned subsidiary in a state-of-the-art facility in Shenzhen, China. We control 100% of the manufacturing and shipping process which enables us to respond quickly to customer product demand and design requirements.
We have invested significantly in the expansion of our technology platforms through our own internal development to ensure we provide the market with leading-edge HMI solutions that are seamless to deploy and perform flawlessly. We spent several years building a research and development (RD) organization in Singapore to develop new product offerings that will meet the market’s growing demand for touch technology and smart surfaces. We have now shifted a majority of RD and product development efforts to Camarillo, California, where we established a Global Product Development and Materials Science Center. We believe this increased presence in the U.S. will allow us to grow our business and be more closely aligned with current and future large-tier customers. We also expect to launch an engineering, research and development center in the United Kingdom in 2022. We also plan to explore potential strategic relationships with companies and technology institutes that will support our growth initiatives.
24
Results of Operations
The following table sets forth certain consolidated statements of operations data for the periods indicated. The percentages in the tables are based on net revenues.
| Year ended December 31, |
| |||||||||
2021 | 2020 |
| |||||||||
$ |
| % |
| $ |
| % |
| ||||
(in thousands, except percentages) |
| ||||||||||
Revenue, net | $ | 7,478 | 100.0 | % | $ | 6,888 | 100.0 | % | |||
Cost of revenue |
| 3,420 | 45.7 |
| 2,986 | 43.4 | |||||
Gross profit |
| 4,058 | 54.3 |
| 3,902 | 56.6 | |||||
Operating expenses: |
|
|
|
|
|
| |||||
Engineering, research and development |
| 893 | 11.9 |
| 918 | 13.3 | |||||
Selling, general and administrative |
| 3,244 | 43.4 |
| 2,874 | 41.7 | |||||
Total operating expenses |
| 4,137 | 55.3 |
| 3,792 | 55.1 | |||||
Income (loss) from operations |
| (79) | (1.1) |
| 110 | 1.6 | |||||
Other income (expense): |
|
|
|
|
|
| |||||
Other income (expense), net |
| (50) | (0.7) |
| (92) | (1.3) | |||||
Income (loss) before income tax expense |
| (129) | (1.7) |
| 18 | 0.3 | |||||
Income tax expense (benefit) |
| 605 | 8.1 |
| (95) | (1.4) | |||||
Net income (loss) | $ | (734) | (9.8) | % | $ | 113 | 1.6 | % | |||
Comparison of the Years Ended December 31, 2021 and 2020
Revenue, net by the markets we serve is as follows:
| Year ended December 31, |
|
|
|
|
| ||||||||||
2021 | 2020 |
| ||||||||||||||
% of Net | % of Net | |||||||||||||||
Amount |
| Revenue |
| Amount |
| Revenue |
| $ Change |
| % Change |
| |||||
| (in thousands, except percentages) |
| ||||||||||||||
Industrial | $ | 2,191 |
| 29.3 | % | $ | 1,681 |
| 24.4 | % | $ | 510 |
| 30.3 | % | |
Medical |
| 1,102 |
| 14.7 |
| 1,082 |
| 15.7 |
| 20 |
| 1.8 | ||||
Consumer |
| 1,271 |
| 17.0 |
| 1,196 |
| 17.4 |
| 75 |
| 6.3 | ||||
Automotive |
| 14 |
| 0.2 |
| — |
| — |
| 14 |
| nm | ||||
Standard |
| 2,900 |
| 38.8 |
| 2,929 |
| 42.5 |
| (29) |
| (1.0) | ||||
Revenue, net | $ | 7,478 |
| 100.0 | % | $ | 6,888 |
| 100.0 | % | $ | 590 |
| 8.6 | % | |
We sell our custom products into the industrial, medical, consumer, and automotive markets. We sell our standard products through various distribution networks. The ultimate customer for standard products may come from different markets which are often unknown to us at the time of sale. Each market has different product design cycles. Products with longer design cycles often have much longer product life-cycles. Industrial and medical products generally have longer design and life-cycles than consumer products. We currently have products with life-cycles that have exceeded twenty years and are ongoing.
Revenues were up in 2021 compared to 2020 in the industrial and consumer markets, and were generally flat in the medical market, and for our standard products. The increase in revenue from our industrial market customers is due to increased purchasing volume by these customers for use in their ongoing product lines resulting from changes in demand by their customers. In all markets, the timing
25
of orders from our customers is not always predictable and can be concentrated in varying periods during the year to coincide with their project and building plans.
| Year ended December 31, |
|
|
|
|
| ||||||||||
2021 | 2020 |
| ||||||||||||||
| % of Net |
|
| % of Net |
|
| ||||||||||
Amount | Revenue | Amount | Revenue | $ Change | % Change |
| ||||||||||
(in thousands, except percentages) |
| |||||||||||||||
Gross profit | $ | 4,058 |
| 54.3 | % | $ | 3,902 |
| 56.6 | % | $ | 156 |
| 4.0 | % | |
Our gross profit and gross margin are impacted by various factors including product mix, customer mix, volume, material costs, manufacturing efficiencies, facilities costs, compensation costs and provisions for excess and obsolete inventories. Although gross profit increased consistent with the increase in revenues, gross margin declined slightly due to changes in product and customer mix.
| Year ended December 31, |
|
|
|
|
| ||||||||||
2021 |
| 2020 |
| |||||||||||||
| % of Net |
| % of Net | |||||||||||||
Amount | Revenue | Amount | Revenue |
| $ Change |
| % Change | |||||||||
(in thousands, except percentages) |
| |||||||||||||||
Engineering, research and development | $ | 893 |
| 11.9 | % | $ | 918 |
| 13.3 | % | $ | (25) |
| (2.7) | % | |
Engineering and RD expenses consist primarily of compensation expenses for employees engaged in research, design and development activities, and the cost of those employees’ indirect supplies and allocation of facilities expenses. Our RD team focuses both on internal design development in order to develop our HMI solutions, as well as design development aimed at addressing our customers’ unique design challenges.
Our engineering and RD costs were down slightly when compared with the prior year. While headcount and related costs increased in both our Camarillo, California lab and our Singapore RD center in 2021, our engineering and RD costs were down on a year-over-year basis because of receipt of a research incentive grant from the Singapore government that reduced expenses for 2021.
| Year ended December 31, |
|
|
|
|
| ||||||||||
2021 | 2020 |
| ||||||||||||||
% of Net | % of Net | |||||||||||||||
| Amount |
| Revenue |
| Amount |
| Revenue |
| $ Change |
| % Change |
| ||||
(in thousands, except percentages) |
| |||||||||||||||
Selling, general and administrative | $ | 3,244 |
| 43.4 | % | $ | 2,874 |
| 41.7 | % | $ | 370 |
| 12.9 | % | |
Selling, general and administrative expenses consist primarily of compensation expenses, legal and other professional fees, facilities expenses and communication expenses. Selling, general and administrative expenses increased as compared with the prior year driven by an increase in headcount and compensation for sales, marketing, finance and administrative personnel, and an increase in legal and other professional fees.
| Year ended December 31, |
|
|
|
| ||||||||||
2021 |
| 2020 | |||||||||||||
| % of Pre- |
|
| % of Pre- | |||||||||||
Amount | tax Income | Amount | tax Income |
| Change |
| % Change | ||||||||
(in thousands, except percentages) | |||||||||||||||
Income tax expense (benefit) | $ | 605 |
| 469.0 | % | $ | (95) |
| (527.8) | % | $ | 700 |
| n/a | |
Tax expense (benefit) reflects statutory tax rates in the jurisdictions in which we operate adjusted for permanent book/tax differences. For 2021, the Company recorded an income tax provision comprised substantially of valuation allowance against domestic deferred tax assets due to recent history of U.S. taxable losses. For 2020, the Company recorded an income tax benefit for net losses in the U.S. that can be carried back for a refund of prior year taxes that were paid at higher U.S. tax rates and carried forward to offset future taxable income.
Our effective tax rate is directly affected by the relative proportions of revenue and income before taxes in the jurisdictions in which we operate. Based on the expected mix of domestic and foreign earnings, we anticipate our effective tax rate to remain similar to the
26
newly stated U.S. statutory rate of 21% primarily due to a significant portion of our earnings originating in the higher rate China jurisdiction (25%), offset by lower rate jurisdictions in Singapore (17%) and Hong Kong (16.5%). State income taxes also have an impact in the U.S.
Discrete tax events may cause our effective rate to fluctuate on a quarterly basis. Certain events, including, for example, acquisitions and other business changes, which are difficult to predict, may also cause our effective tax rate to fluctuate. We are subject to changing tax laws, regulations, and interpretations in multiple jurisdictions. Corporate tax reform continues to be a priority in the U.S. and other jurisdictions. Additional changes to the tax system in the U.S. could have significant effects, positive and negative, on our effective tax rate, and on our deferred tax assets and liabilities.
Liquidity and Capital Resources
Cash requirements for working capital and capital expenditures have been funded from cash balances on hand, cash generated from operations and sales of equity securities. As of December 31, 2021, we had cash and cash equivalents of $10.8 million, working capital of $12.0 million and no indebtedness. Cash and cash equivalents consist of cash and money market funds. We did not have any short-term or long-term investments as of December 31, 2021. Of the $10.8 million of cash balances on hand, $2.4 million was held by foreign subsidiaries. If these funds are needed for our operations in the U.S., we have several methods to repatriate the funds without significant tax effects, including repayment of intercompany loans or distributions of previously taxed income. Other distributions may require us to incur U.S. or foreign taxes to repatriate these funds. However, our intent is to permanently reinvest these funds outside the U.S. and our current plans do not demonstrate a need to repatriate cash to fund our U.S. operations.
In April 2020, the Company received a loan in the aggregate principal amount of $186 thousand pursuant to the Paycheck Protection Program (the “PPP”) under the Coronavirus Aid, Relief, and Economic Security Act (the “CARES Act”). The loan was evidenced by a promissory note, dated April 21, 2020, issued by us to the lender, which was to mature on April 20, 2022, and bore interest at a rate of 1.00% per annum, payable monthly following an initial deferral period as specified under the PPP. Proceeds from the loan were used to fund designated expenses, including certain payroll costs, group health care benefits and other permitted expenses, in accordance with the PPP. The full amount of the loan principal and interest was forgiven in February 2021.
During the fourth quarter of 2021, we sold 200,000 shares of our 8.0% Series A Convertible Preferred Stock at a price of $25.00 per share for gross proceeds to us of $5.0 million before placement agent fees and transaction expenses. Each share of Series A Preferred Stock is convertible into two shares of our common stock. The designations, rights and preferences of our Series A Convertible Preferred Stock provide that we will pay, when, as and if declared by our board of directors, monthly cumulative cash dividends at an annual rate of 8.0%, which is equivalent to $0.16667 per month and $2.00 per annum per share, based on the $25.00 liquidation preference. Dividends on the Series A Convertible Preferred Stock will accrue daily and be cumulative from, and including, the first day of the calendar month in which the shares are issued and will be payable monthly in arrears on the 15th day of each calendar month. Our board of directors commenced paying dividends on our Series A Convertible Preferred Stock in November 2021, and we expect that our board of directors will continue to declare and pay monthly cash dividends on our Series A Convertible Preferred Stock, subject to the limitations to do so under Nevada law.
We believe that our existing cash and cash equivalents balance will be sufficient to maintain our current operations considering our current financial condition, obligations, and other expected cash flows. If our circumstances change, however, we may require additional cash. If we require additional cash, we may attempt to raise additional capital through equity, equity-linked or debt financing arrangements. If we raise additional funds by issuing equity or equity-linked securities, the ownership of our existing stockholders will be diluted. If we raise additional financing by the incurrence of indebtedness, we could be subject to fixed payment obligations and could also be subject to restrictive covenants, such as limitations on our ability to incur additional debt, and other operating restrictions that could adversely impact our ability to conduct our business. If we are unable to raise additional needed funds, we may also take measures to reduce expenses to offset any shortfall.
27
Cash Flow Analysis
Our cash flows from operating, investing and financing activities are summarized as follows:
Year ended December 31, | ||||||
| 2021 |
| 2020 | |||
| (in thousands) | |||||
Net cash provided by operating activities | $ | 231 | $ | 39 | ||
Net cash (used in) investing activities |
| (159) |
| (90) | ||
Net cash provided by financing activities |
| 4,520 |
| 186 | ||
Net Cash Provided by Operating Activities
For the year ended December 31, 2021, the $231 thousand in net cash provided by operating activities was attributable to net loss of $(734) thousand, adjusted for non-cash charges of $819 thousand, non-cash gain on forgiveness of PPP loan of $186 thousand, and cash from changes in operating assets and liabilities of $332 thousand.
For the year ended December 31, 2020, the $39 thousand in net cash provided by operating activities was attributable to net income of $113 thousand, adjusted for non-cash charges of $237 thousand, and cash used in changes in operating assets and liabilities of $311 thousand.
Accounts receivable decreased slightly from $1,113 thousand at December 31, 2020 to $1,080 thousand at December 31, 2021 due to timing of shipments and cash collections during the fourth quarter of 2021 compared to the fourth quarter of 2020. Many of our customers pay promptly and accounts receivable is generally related to the most recent shipments. Inventories decreased from $866 thousand at December 31, 2020 to $814 thousand at December 31, 2021. Inventory balances fluctuate depending on the timing of materials purchases and product shipments. Prepaid expenses and other current assets were generally unchanged during the year. Accounts payable and accrued liabilities increased from $578 thousand at December 31, 2020 to $845 thousand at December 31, 2021 primarily due to the timing of payment for purchases of materials, compensation, and other services.
Net Cash Used in Investing Activities
Net cash used in investing activities of $159 thousand for the year ended December 31, 2021 consisted primarily of capital expenditures related to completion of the Global Product Development and Materials Science Center in our Camarillo footprint. Net cash used in investing activities of $90 thousand for the year ended December 31, 2020 consisted primarily of legal costs related to securing patents on new product development.
Net Cash Provided by Financing Activities
Net cash provided by financing activities of $4.5 million for the year ended December 31, 2021 was from our Series A Convertible Preferred Stock offering in which we raised gross offering proceeds of $5.0 million before reductions for selling commissions and costs. Net cash provided by financing activities of $186 thousand for the year ended December 31, 2020 related to our PPP loan.
Transactions with Related Parties
For a discussion of transactions with related parties, see Note 10, Related Party Transactions, of the notes to the consolidated financial statements, and Item 13, Certain Relationships and Related Transactions, and Director Independence, appearing elsewhere in this Annual Report on Form 10-K.
Off-Balance Sheet Arrangements
As of December 31, 2021 and 2020, we did not have any relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities, which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes. As such, we are not exposed to any financing, liquidity, market or credit risk that could arise if we had engaged in such relationships.
28
Critical Accounting Policies and Estimates
We prepare our consolidated financial statements in accordance with generally accepted accounting principles in the United States (“GAAP”). The preparation of consolidated financial statements requires us to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenue, costs and expenses, and related disclosures. We evaluate our estimates and assumptions on an ongoing basis. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances. Actual results could differ significantly from the estimates made by our management. To the extent that there are differences between our estimates and actual results, our future financial statements presentation, financial condition, results of operations, and cash flows will be affected.
We believe that the assumptions and estimates associated with revenue recognition, inventory valuation, accounts receivable, stock-based compensation expense and income taxes have the greatest potential impact on our consolidated financial statements. Therefore, we consider these to be our critical accounting policies and estimates. For further information on all of our significant accounting policies, see the notes to our consolidated financial statements.
Revenue Recognition
In accordance with Accounting Standards Codification (“ASC”) Topic 606, Revenue from Contracts with Customers (“ASC 606”), we recognize revenues when promised goods or services are transferred to customers in an amount that reflects the consideration that is expected to be received for those goods or services. The guidance defines a five-step process to achieve this core principle and, in doing so, judgment and estimates may be required within the revenue recognition process including identifying performance obligations in the contract, estimating the amount of variable consideration to include in the transaction price and allocating the transaction price to each separate performance obligation. Generally, we recognize revenue when there is persuasive evidence that an arrangement exists, title and risk of loss have passed, delivery has occurred or the services have been rendered, the sales price is fixed or determinable and collection of the related receivable is reasonably assured. Title and risk of loss generally pass to our customers upon shipment. In limited circumstances where either title or risk of loss pass upon destination or acceptance or when collection is not reasonably assured, we defer revenue recognition until such events occur.
We input orders based upon receipt of a customer purchase order, confirm pricing through the customer purchase order, validate credit worthiness through past payment history or other financial data and record revenue upon shipment of goods and when risk of loss and title transfer. All customers have warranty rights, and some customers have explicit or implicit rights of return. We record reserves for potential customer returns and warranty rights.
Inventory Valuation
Inventories are stated at lower of cost or net realizable value (“NRV”). Inventory costs are determined using standard costs which approximate actual costs under the first-in, first-out method. We evaluate inventories for excess quantities and obsolescence. Our evaluation considers market and economic conditions, technology changes, new product introductions, and changes in strategic business direction, and requires estimates that may include elements that are uncertain. In order to state the inventory at lower of cost or NRV, we maintain reserves against individual stocking units. Inventory write-downs, once established, are not reversed until the related inventories have been sold or scrapped. If future demand or market conditions are less favorable than our projections, a write-down of inventory may be required, and would be reflected in cost of goods sold in the period the revision is made.
Accounts Receivable and Allowance for Credit Losses
Accounts receivable are recorded at the invoice amount and presented net of the allowance for credit losses. They do not bear interest. We evaluate the collectability of accounts receivable at each balance sheet date using a combination of factors, such as historical experience, credit quality, age of the accounts receivable balances, and economic conditions that may affect a customer’s ability to pay. We include any accounts receivable balances that are determined to be uncollectible in the overall allowance for credit losses using the specific identification method. After all attempts to collect a receivable have failed, the receivable is written off against the allowance.
29
Stock-Based Compensation
We account for stock-based compensation under ASC Topic 718, Compensation-Stock Compensation, which requires us to record related compensation costs in the statement of operations. Calculating the fair value of stock-based compensation awards requires the input of highly subjective assumptions, including the expected life of the awards and expected volatility of our stock price. Expected volatility is a statistical measure of the amount by which a stock price is expected to fluctuate during a period. Our estimates of expected volatilities are based on weighted historical implied volatility. The expected forfeiture rate applied in calculating stock-based compensation cost is estimated using historical data and is updated annually.
The assumptions used in calculating the fair value of stock-based awards involve estimates that require management judgment. If factors change and we use different assumptions, our stock-based compensation expense could change significantly in the future. In addition, if our actual forfeiture rate is different from our estimate, our stock-based compensation expense could change significantly in the future.
Income Taxes
We account for income taxes using the asset and liability method in accordance with ASC Topic 740, Income Taxes, which requires recognition of deferred tax liabilities and assets for the expected future tax consequences of events that have been included in the financial statements or tax returns. Under this method, we must make estimates and judgments in determining the provision for taxes for financial statement purposes. These estimates and judgments occur in the calculation of tax credits, benefits, and deductions, and in the calculation of certain tax assets and liabilities that arise from differences in the timing of recognition of revenue and expense for tax and financial statement purposes, as well as the interest and penalties related to uncertain tax positions. In addition, the Company operates within multiple tax jurisdictions and is subject to audit in these jurisdictions. Significant changes in these estimates may result in an increase or decrease to our tax provision in a subsequent period. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date.
Our foreign subsidiaries are subject to foreign income taxes on earnings in their respective jurisdictions. Earnings of our foreign subsidiaries are generally included in our U.S. federal income tax return as they are earned.
We assess the likelihood that our deferred tax assets will be recovered from future taxable income and to the extent we believe that recovery is not determinable beyond a “more likely than not” standard, we establish a valuation allowance. To the extent we establish a valuation allowance or increase or decrease this allowance in a period, we include an expense or benefit within the tax provision in the statement of operations.
The calculation of our tax liabilities involves dealing with uncertainties in the application of complex tax regulations. We recognize liabilities for uncertain tax positions based on a two-step process. The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates that it is more likely than not that the position will be sustained on audit, including resolution of related appeals or litigation processes, if any. If we determine that a tax position will more likely than not fail to be sustained on audit, the second step requires us to estimate and measure the tax benefit as the largest amount that is more than 50% likely to be realized upon ultimate settlement. It is inherently difficult and subjective to estimate such amounts, as we have to determine the probability of various hypothetical outcomes. We re-evaluate these uncertain tax positions on a quarterly basis. This evaluation is based on factors such as changes in facts or circumstances, changes in tax law, new audit activity, and effectively settled issues. Determining whether an uncertain tax position is effectively settled requires judgment. Such a change in recognition or measurement would result in the recognition of a tax benefit or an additional charge to the tax provision in the period in which a change in judgment occurs.
Recently Issued and Adopted Accounting Pronouncements
For a discussion of recently adopted accounting pronouncements, see Recently Issued Accounting Pronouncements in Note 1, The Company and its Significant Accounting Policies, of the notes to the consolidated financial statements appearing elsewhere in this Annual Report on Form 10-K.
30
ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
Not applicable.
ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
31
INTERLINK ELECTRONICS, INC.
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS
32
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
Board of Directors and Shareholders
Interlink Electronics, Inc.
Opinion on the Financial Statements
We have audited the accompanying consolidated balance sheet of Interlink Electronics, Inc. (the Company) as of December 31, 2021, and the related consolidated statements of operations, comprehensive income (loss), stockholders’ equity, and cash flows for the year then ended, and the related notes (collectively referred to as the “financial statements”). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2021, and the results of its operations and its cash flows for the year then ended in conformity with accounting principles generally accepted in the United States of America.
Basis for Opinion
These financial statements are the responsibility of the entity’s management. Our responsibility is to express an opinion on the entity’s financial statements based on our audit. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audit we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the entity’s internal control over financial reporting. Accordingly, we express no such opinion.
Our audit included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audit also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audit provide a reasonable basis for our opinion.
Critical Audit Matters
Critical audit matters are matters arising from the current period audit of the financial statements that were communicated or required to be communicated to the audit committee and that: (1) relate to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgements. We determined that there are no critical audit matters.
/s/
We have served as the Company’s auditor since 2021.
March 29, 2022
33
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Board of Directors and Stockholders of
Interlink Electronics, Inc. Subsidiaries
Opinion on the Financial Statements
We have audited the accompanying consolidated balance sheet of Interlink Electronics, Inc. Subsidiaries (the Company) as of December 31, 2020, and the related consolidated statements of operations, comprehensive income (loss), stockholders’ equity, and cash flows for the year then ended, and the related notes (collectively referred to as the consolidated financial statements). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2020, and the consolidated results of its operations and its cash flows for the year then ended, in conformity with accounting principles generally accepted in the United States of America.
Basis for Opinion
These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audit. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audit, we are required to obtain an understanding of internal control over financial reporting, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.
Our audit included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audit also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audit provide a reasonable basis for our opinion.
Critical Audit Matter
The critical audit matter communicated below is a matter arising from the current period audit of the consolidated financial statements that was communicated or required to be communicated to the audit committee and that: (1) relates to accounts or disclosures that are material to the consolidated financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing separate opinions on the critical audit matter or on the accounts or disclosures to which it relates.
Realizability of deferred tax assets
As described in Notes 1 and 6 to the consolidated financial statements, the Company recognizes deferred income taxes for the effects of temporary differences between the tax basis of an asset or liability and their reported amounts in the accompanying consolidated balance sheet. These temporary differences result in taxable or deductible amounts in future years. Valuation allowances are established, when necessary, to reduce deferred tax assets to the amount that is more likely than not to be realized.
As of December 31, 2020 the Company concluded it is more likely than not the Company will generate sufficient taxable income primarily within the applicable net operating loss periods to fully realize $527 thousand of its net deferred tax assets. We identified the realizability of deferred tax assets as a critical audit matter due to the Company’s tax structure and the significant judgments and
34
estimates made by management to determine that sufficient taxable income will be generated to realize a portion of deferred tax assets prior to expiration. This required a high degree of auditor judgment and an increased extent of effort when performing audit procedures to evaluate management’s estimates of taxable income in relation to the duration of statutory carryforward periods for the use of these deferred tax assets.
The primary procedures we performed to address this critical audit matter included:
| ● | Recalculating the mathematical accuracy of management’s accounting for the previously described taxes, which included supporting calculations, schedules, and reconciliations. |
| ● | Reading and evaluating management’s documentation of the accounting for income taxes, including relevant significant accounting policies, and information obtained by management from third party tax specialists which details management’s basis for the accounting and impact to the consolidated financial statements. |
| ● | Utilized with internal tax specialists in evaluating management’s calculation of its provision for income taxes and that the significant judgments used were applied consistently with the tax code. |
/s/
We served as the Company’s auditor since 2017, which ended in 2021.
March 16, 2021
35
INTERLINK ELECTRONICS, INC.
CONSOLIDATED BALANCE SHEETS
December 31, | December 31, | |||||
| 2021 |
| 2020 | |||
| (in thousands, except par value) | |||||
ASSETS | ||||||
Current assets | ||||||
Cash and cash equivalents |
| $ | |
| $ | |
Restricted cash | | | ||||
Accounts receivable, net | | | ||||
Inventories | | | ||||
Prepaid expenses and other current assets | | | ||||
Total current assets | | | ||||
Property, plant and equipment, net | | | ||||
Intangible assets, net | | | ||||
Right-of-use assets | | | ||||
Deferred tax assets | | | ||||
Other assets | | | ||||
Total assets |
| $ | |
| $ | |
LIABILITIES AND STOCKHOLDERS’ EQUITY | ||||||
Current liabilities | ||||||
Accounts payable |
| $ | |
| $ | |
Accrued liabilities | | | ||||
Lease liabilities, current | | | ||||
PPP loan payable | — | | ||||
Accrued income taxes | | | ||||
Total current liabilities | | | ||||
| ||||||
Long-term liabilities | ||||||
Lease liabilities, long term | | | ||||
Total long-term liabilities | | | ||||
Total liabilities | | | ||||
Commitments and contingencies (Note 11) | ||||||
Stockholders’ equity |
| |||||
Preferred stock, $ | | |||||
Common stock, $ | | | ||||
Additional paid-in-capital | | | ||||
Accumulated other comprehensive income | | | ||||
Accumulated deficit | ( | ( | ||||
Total stockholders’ equity | | | ||||
Total liabilities and stockholders’ equity |
| $ | |
| $ | |
The accompanying notes are an integral part of these consolidated financial statements.
36
INTERLINK ELECTRONICS, INC.
CONSOLIDATED STATEMENTS OF OPERATIONS
Year ended December 31, | ||||||
| 2021 |
| 2020 | |||
| (in thousands, except per share data) | |||||
Revenue, net |
| $ | |
| $ | |
Cost of revenue | | | ||||
Gross profit | | | ||||
Operating expenses: |
|
| ||||
Engineering, research and development | | | ||||
Selling, general and administrative | | | ||||
Total operating expenses | | | ||||
Income (loss) from operations | ( | | ||||
Other income (expense): |
|
| ||||
Other income (expense), net | ( | ( | ||||
Income (loss) before income taxes | ( | | ||||
Income tax expense (benefit) | | ( | ||||
Net income (loss) | $ | ( | $ | | ||
Net income (loss) applicable to common stockholders | $ | ( | $ | | ||
Earnings (loss) per common share, basic |
| $ | ( |
| $ | |
Earnings (loss) per common share, diluted | $ | ( |
| $ | | |
Weighted average common shares outstanding - basic | | | ||||
Weighted average common shares outstanding - diluted | | | ||||
37
INTERLINK ELECTRONICS, INC.
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)
Year ended December 31, | ||||||
| 2021 |
| 2020 | |||
(in thousands) | ||||||
Net income (loss) | $ | ( | $ | | ||
Other comprehensive income, net of tax: |
|
|
|
| ||
Foreign currency translation adjustments |
| |
| | ||
Comprehensive income (loss) | $ | ( | $ | | ||
The accompanying notes are an integral part of these consolidated financial statements.
38
INTERLINK ELECTRONICS, INC.
CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY
Accumulated | ||||||||||||||||||||||
Additional | Other | Total | ||||||||||||||||||||
Preferred Stock | Common Stock | Paid-in- | Comprehensive | Accumulated | Stockholders' | |||||||||||||||||
| Shares |
| Amount |
| Shares |
| Amount |
| Capital |
| Income (Loss) |
| Deficit |
| Equity | |||||||
Balance at December 31, 2019 | — | $ | — |
| |
| $ | |
| $ | |
| $ | ( |
| $ | ( |
| $ | | ||
Net income | — | — |
| — |
| — |
| — |
| — |
| |
| | ||||||||
Foreign currency translation adjustment | — | — |
| — |
| — |
| — |
| |
| — |
| | ||||||||
Stock-based compensation expense | — | — |
| |
| — |
| |
| — |
| — |
| | ||||||||
Balance at December 31, 2020 | — | — |
| |
| |
| |
| |
| ( |
| | ||||||||
Net (loss) | — | — |
| — |
| — |
| — |
| — |
| ( |
| ( | ||||||||
Issuance of preferred stock | | | — | — | | — | — | | ||||||||||||||
Preferred stock dividends | — | — | — | — | — | — | ( | ( | ||||||||||||||
Foreign currency translation adjustment | — | — |
| — |
| — |
| — |
| |
| — |
| | ||||||||
Stock-based compensation expense | — | — |
| |
| — |
| |
| — |
| — |
| | ||||||||
Balance at December 31, 2021 | | $ | |
| | $ | | $ | | $ | | $ | ( | $ | | |||||||
The accompanying notes are an integral part of these consolidated financial statements.
39
INTERLINK ELECTRONICS, INC.
CONSOLIDATED STATEMENTS OF CASH FLOWS
Year ended December 31, | ||||||
| 2021 |
| 2020 | |||
(in thousands) | ||||||
Cash flows from operating activities: | ||||||
Net income (loss) |
| $ | ( |
| $ | |
Adjustments to reconcile net income (loss) to net cash provided by operating activities: | ||||||
Depreciation and amortization | | | ||||
Stock-based compensation expense | | | ||||
Loss on disposal of property, plant and equipment | | — | ||||
Gain on forgiveness of PPP loan | ( | — | ||||
Operating leases, other | ( | | ||||
Deferred income taxes | | ( | ||||
Changes in operating assets and liabilities: | ||||||
Accounts receivable | | ( | ||||
Inventories | | | ||||
Prepaid expenses and other assets | ( | ( | ||||
Accounts payable | | ( | ||||
Accrued liabilities | | | ||||
Accrued income taxes | | | ||||
Deferred revenue | — | ( | ||||
Net cash provided by operating activities | | | ||||
Cash flows from investing activities: | ||||||
Property, plant and equipment | ( | ( | ||||
Intangible assets | — | ( | ||||
Net cash used in investing activities | ( | ( | ||||
Cash flows from financing activities: | ||||||
Proceeds from issuance of preferred stock, net of $ | | — | ||||
Payment of dividends on preferred stock | ( | — | ||||
Proceeds from PPP loan | — | | ||||
Net cash provided by financing activities | | | ||||
Effect of exchange rate changes on cash | | | ||||
Net increase in cash, cash equivalents, and restricted cash | | | ||||
Cash, cash equivalents and restricted cash, beginning of period | | | ||||
Cash, cash equivalents and restricted cash, end of period |
| $ | |
| $ | |
Reconciliation of cash, cash equivalents and restricted cash, end of period: | ||||||
Cash and cash equivalents, end of period | $ | | $ | | ||
Restricted cash, end of period | | | ||||
Cash, cash equivalents and restricted cash, end of period | $ | | $ | | ||
Supplemental disclosure of cash flow information: | ||||||
Income taxes paid |
| $ | |
| $ | |
Interest paid | — | — | ||||
Supplemental non-cash investing and financing activities: | ||||||
Lease liabilities arising from obtaining right-of-use assets | $ | | $ | | ||
The accompanying notes are an integral part of these consolidated financial statements.
40
INTERLINK ELECTRONICS, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
Note 1 - The Company and its Significant Accounting Policies
Description of Business
Interlink Electronics, Inc. (“we,” “us,” “our,” “Interlink” or the “Company”) designs, develops, manufactures and sells a range of force-sensing technologies that incorporate our proprietary materials technology, firmware and software into a portfolio of standard sensor based products and custom sensor system solutions. These include sensor components, subassemblies, modules and products that support effective, efficient cursor control and novel three-dimensional user inputs. Our Human Machine Interface (“HMI”) technology platforms are deployed in a wide range of markets including consumer electronics, automotive, industrial, and medical.
Interlink serves our world-wide customer base from our corporate headquarters in Irvine, California, our Global Product Development and Materials Science Center and our distribution and logistics center in Camarillo, California, our printed-electronics manufacturing facility in Shenzhen, China, our engineering, research and development center in Singapore, and our distribution and logistics center in Hong Kong. We also maintain a technical and sales office in Japan, and we expect to launch an engineering, research and development center in the United Kingdom in 2022. Our principal executive office is located at 1 Jenner, Suite 200, Irvine, California 92618 and our telephone number is (805) 484-8855. Our website address is www.interlinkelectronics.com.
Fiscal Year
Our fiscal year is the calendar year reporting cycle beginning January 1 and ending December 31.
Basis of Presentation
The accompanying consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America (“GAAP”). Our reporting currency is the United States dollar.
Our consolidated financial statements include the accounts of Interlink Electronics, Inc. and our subsidiaries in China, Hong Kong, Singapore, and the United Kingdom. All intercompany accounts and transactions were eliminated in consolidation.
Foreign Currency Translation
The functional currency of our Chinese subsidiary is the Chinese Yuan Renminbi. The functional currency for our Hong Kong, Singapore and United Kingdom subsidiaries is the United States dollar. However, our Hong Kong, Singapore, and United Kingdom subsidiaries also transact business in their local currency. Assets and liabilities are translated into United States dollars at the exchange rate in effect on the balance sheet date. Revenues and expenses are translated at the average exchange rate prevailing during the respective periods. Foreign currency transaction and remeasurement gains and losses are included in results of operations within other income (expense), net, for which losses of $
Segment Reporting
We operate in
Use of Estimates
The preparation of consolidated financial statements in accordance with GAAP requires management to make estimates and assumptions that affect the amounts reported in the consolidated financial statements and disclosures made in the accompanying notes to the consolidated financial statements. Management regularly evaluates estimates and assumptions related to revenue recognition, allowances for credit losses, inventory valuation reserves, warranty reserves, stock-based compensation, purchased intangible asset valuations and useful lives, asset retirement obligations, and deferred income tax asset valuation allowances. These estimates and assumptions are based on current facts, historical experience and various other factors that we believe to be reasonable under the
41
circumstances, the results of which form the basis for making judgments about carrying values of assets and liabilities that are not readily apparent from other sources. The actual results we experience may differ materially and adversely from our original estimates. To the extent there are material differences between the estimates and the actual results, our future results of operations will be affected.
Revenue Recognition
The Company recognizes revenue in accordance with Accounting Standards Codification Topic 606, Revenue from Contracts with Customers (“ASC 606”), when its customer obtains control of promised goods or services, in an amount that reflects the consideration which we expect to receive in exchange for those goods or services. To determine revenue recognition for arrangements that are within the scope of ASC 606, we perform the following five steps; (i) identify the contracts(s) with a customer; (ii) identify the performance obligations in the contract; (iii) determine the transaction price; (iv) allocate the transaction price to the performance obligations; and (v) recognize revenue when (or as) we satisfy a performance obligation. The five-step model is applied to contracts when it is probable that we will collect the consideration we are entitled to in exchange for the goods or services transferred to the customer. At contract inception, once the contract is determined to be within the scope of ASC 606, we assess the goods or services promised within each contract and determine those that are performance obligations and assess whether each promised good or service is distinct. We then recognize revenue in the amount of the transaction price that is allocated to the respective performance obligation when (or as) the performance obligation is satisfied. Delivery occurs when goods are shipped and title and risk of loss transfer to the customer, in accordance with the terms specified in the arrangement with the customer. Revenue recognition is deferred until the earnings process is complete.
We (i) input orders based upon receipt of a customer purchase order, (ii) confirm pricing through the customer purchase order record, (iii) validate creditworthiness through past payment history, credit agency reports and other financial data, and (iv) recognize revenue upon shipment of goods or when risk of loss and title transfer to the buyer. All customers have warranty rights, and some customers also have explicit or implicit rights of return. We establish reserves for potential customer returns or warranty repairs based on historical experience and other factors that enable us to reasonably estimate the obligation.
A portion of our product sales is made through distributors under agreements allowing for right of return. Our past history with these sell-through right of return provisions allow us to reasonably estimate the amount of inventory that could be returned pursuant to these agreements, and revenue is recognized accordingly.
Warranty
We establish reserves for future product warranty costs that are expected to be incurred pursuant to specific warranty provisions with our customers. We generally warrant our products against defects for
Shipping and Handling Fees and Costs
Amounts billed to customers for shipping and handling fees are presented in revenue. Costs incurred for shipping and handling are included in cost of revenue.
Engineering, Research and Development Costs
Engineering, research and development (“RD”) costs are expensed when incurred. RD expenses consist primarily of compensation expenses for employees engaged in research, design and development activities. RD expenses also include depreciation and amortization, and overhead, including facilities expenses.
42
Advertising and Marketing Costs
All of the costs related to advertising and marketing our products are expensed as incurred or at the time the marketing takes place.
Stock-based Compensation
All stock-based payments to employees, including grants of employee stock options and employee stock purchase rights, are recognized in the financial statements based on their respective grant date (measurement date) fair values. We calculate the compensation cost of full-value awards such as restricted stock-based on the market value of the underlying stock at the date of the grant. We estimate the expected life of a stock award as the period of time that the award is expected to be outstanding. We are required to estimate the fair value of stock-based payment awards on the date of grant using an option-pricing model. The value of the portion of the award that is ultimately expected to vest is recognized as expense ratably over the requisite service periods. We estimate the fair value of each option award as of the date of grant using the Black-Scholes option pricing model, which was developed for use in estimating the value of traded options that have no vesting restrictions and that are freely transferable. The Black-Scholes option pricing model considers, among other factors, the expected life of the award and the expected volatility of our stock price. Although the Black-Scholes option pricing model meets the accounting guidance requirements, the fair values generated by the Black-Scholes option pricing model may not be indicative of the actual fair values of our awards, as it does not consider other factors important to those stock-based payment awards, such as continued employment, periodic vesting requirements, and limited transferability.
We have elected to recognize compensation expense for all stock-based awards on a straight-line basis over the requisite service period for the entire award. The amount of compensation expense recognized through the end of each reporting period is equal to the portion of the grant-date value of the awards that have vested, or for partially vested awards, the value of the portion of the award that is ultimately expected to vest for which the requisite services have been provided. The benefits of tax deductions in excess of recognized compensation cost are reported as a financing cash flow.
Other Income (Expense), Net
Other income (expense), net, consists of interest income, foreign currency exchange gains and losses and other non-operating gains and losses.
Income Taxes
We account for income taxes under the asset and liability method, whereby deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax basis and operating loss and tax credit carryforwards. We assess the likelihood that our deferred tax assets will be recovered from future taxable income and to the extent we believe that recovery is not determinable beyond a “more likely than not” standard, we establish a valuation allowance. To the extent we establish a valuation allowance or increase or decrease this allowance in a period, we include an expense or benefit within the tax provision in the statement of operations. We also utilize a “more likely than not” recognition threshold and measurement analysis for the financial statement recognition and measurement of a tax position taken or expected to be taken in a tax return. We recognize potential accrued interest and penalties related to unrecognized tax benefits within the consolidated statements of operations as income tax expense.
We operate within multiple tax jurisdictions and are subject to audit in these jurisdictions. Our foreign subsidiaries are subject to foreign income taxes on earnings in their respective jurisdictions. Earnings of our foreign subsidiaries are included in our U.S. federal income tax return as they are earned.
Comprehensive Income (Loss)
Comprehensive income (loss) includes all components of comprehensive income (loss), including net income (loss) and any changes in equity during the period from transactions and other events and circumstances generated by non-owner sources.
43
Earnings Per Share
Basic earnings per share is computed by dividing net income (loss) applicable to common stockholders (i.e., net income (loss) adjusted for preferred stock dividends declared or accumulated) by the weighted average number of common shares outstanding during the period. Diluted earnings per share is computed by dividing net income (loss) by the weighted average number of diluted common shares, which is inclusive of common stock equivalents from unexercised stock options, unvested restricted stock units, and shares issuable upon conversion of convertible preferred stock. Unexercised stock options, unvested restricted stock units, and convertible preferred stock are considered to be common stock equivalents if, using the treasury stock method, they are determined to be dilutive.
Under the two-class method of determining earnings for each class of stock, we consider the dividend rights and participating rights in undistributed earnings for each class of stock.
Leases
The Company accounts for its leases under ASC 842. Under this guidance, arrangements meeting the definition of a lease are classified as operating or financing leases, and are recorded on the consolidated balance sheet as both a right of use asset and lease liability, calculated by discounting fixed lease payments over the lease term at the rate implicit in the lease or the Company’s incremental borrowing rate. Lease liabilities are increased by interest and reduced by payments each period, and the right of use asset is amortized over the lease term. For finance leases, interest on the lease liability and the amortization of the right of use asset results in front-loaded expense over the lease term. Variable lease expenses are recorded when incurred.
In calculating the right of use and lease liability, the Company has elected to combine lease and non-lease components. The Company excludes short-term leases having initial term of 12 months or less from the new guidance as an accounting policy election, and recognizes rent expense on a straight-line basis over the lease term.
Risk and Uncertainties
Our future results of operations involve a number of risks and uncertainties. Factors that could affect our business or future results and cause actual results to vary materially from historical results include, but are not limited to, the rapid change in our industry; problems with the performance, reliability or quality of our products; loss of customers; impacts of doing business internationally, including foreign currency fluctuations; potential shortages of the supplies we use to manufacture our products; disruptions in our manufacturing facilities; changes in environmental directives impacting our manufacturing process or product lines; the development of new proprietary technology and the enforcement of intellectual property rights by or against us; our ability to attract and retain qualified employees; and our ability to raise additional capital.
Public health threats could have an adverse effect on our operations and financial results.
Public health threats could adversely affect our ongoing or planned business operations. In particular, the outbreak in December 2019 of a novel coronavirus (COVID-19) in China has resulted in quarantines, restrictions on travel and other business and economic disruptions. We cannot presently predict the scope and severity of any potential business shutdowns or disruptions, but if we or any of the third parties with whom we engage, including the suppliers, distributers, resellers and other third parties with whom we conduct business, were to experience shutdowns or other business disruptions, our ability to conduct our business in the manner and on the timelines presently planned could be materially and adversely impacted.
Cash, Cash Equivalents and Restricted Cash
We invest excess cash in highly liquid interest-bearing instruments, including commercial paper or money market accounts. Investments with original maturity dates less than 90 days are classified as cash equivalents. Cash that is reserved for a specific purpose and therefore not available for immediate or general business use is classified as restricted cash. All of our cash, cash equivalents and restricted cash are held at major financial institutions in the United States, China, Hong Kong and Singapore. Our balances in each country were insured at the maximum limit determined by each country. In the U.S., we had approximately $
44
2021 and 2020, respectively, was not insured. Approximately $
Accounts Receivable and Allowance for Credit Losses
Accounts receivable are recorded at the invoice amount and presented net of the allowance for credit losses. Our receivables do not bear interest. We evaluate the collectability of accounts receivable at each balance sheet date using a combination of factors, such as specific customer historical experience and credit quality, overall historical data, age of the accounts receivable balances, and economic conditions that may affect a customer’s ability to pay. We include any accounts receivable balances that are determined to be uncollectible in the overall allowance for credit losses using the specific identification method. After all attempts to collect a receivable have failed, the receivable is written off against the allowance.
Inventories
Inventories are stated at the lower of cost or net realizable value (NRV). Inventory costs are determined using standard costs which approximate actual costs under the first-in, first-out method. Costs include the costs of purchased materials and outsourced assembly. NRV is the amount by which the estimated selling price of the product exceeds the sum of any additional costs expected to be incurred on the sale of such product in the ordinary course of business.
We evaluate inventories for excess quantities and obsolescence. Our evaluation considers market and economic conditions; technology changes; new product introductions; and changes in strategic business direction. Estimates by their very nature include elements that are uncertain. In order to state the inventory at the lower of cost or NRV, we maintain reserves against individual stocking units Inventory reserves, once established, are not reversed until the related inventories have been sold or scrapped. If future demand or market conditions are less favorable than our projections, a write-down of inventory may be required, and would be reflected in cost of revenues sold in the period the revision is made.
Property, Plant and Equipment, Net
Property, plant and equipment are carried at cost less accumulated depreciation and amortization. Depreciation and amortization expense are calculated using the straight-line method over the assets’ remaining estimated useful lives, ranging from to
We perform periodic reviews to evaluate the recoverability of property, plant and equipment and to determine whether facts and circumstances exist that would indicate that the carrying amounts of property, plant and equipment exceed their fair values. If facts and circumstances indicate that the carrying amount of property, plant and equipment might not be fully recoverable, projected undiscounted net cash flows associated with the related asset or group of assets over their estimated remaining useful lives are compared against their respective carrying amounts. In the event that the projected undiscounted cash flows are not sufficient to recover the carrying value of the assets, the assets are written down to their estimated fair values. All long-lived assets to be disposed of are reported at the lower of carrying amount or fair market value, less expected selling costs.
Intangible Assets, Net
Our intangible assets consist primarily of patents and trademarks and are carried at cost less accumulated amortization. We evaluate our finite-lived assets for impairment whenever events or changes in circumstances indicate the carrying value of an intangible asset or asset group may not be recoverable. The carrying value of an intangible asset or asset group is not recoverable if the amounts of undiscounted future cash flows the assets are expected to generate (including any net proceeds expected from the disposal of the asset) are less than its carrying value. When we identify that an impairment has occurred, we reduce the carrying value of the asset to its comparable market value (if available and appropriate) or to its estimated fair value based on a discounted cash flow approach. As of December 31, 2021, we have not recognized any impairment losses for our intangible assets. Currently, we do not have goodwill or indefinite-lived intangible assets.
45
Fair Value Measurements
We determine fair value measurements based on the assumptions that market participants would use in pricing the asset or liability. As a basis for considering market participant assumptions in fair value measurements, we follow the following fair value hierarchy that distinguishes between (1) market participant assumptions developed based on market data obtained from independent sources (observable inputs) and (2) our own assumptions about market participant assumptions developed based on the best information available in the circumstances (unobservable inputs):
Level 1: Observable inputs such as quoted prices for identical assets or liabilities in active markets;
Level 2: Other inputs observable directly or indirectly, such as quoted prices for similar assets or liabilities or market-corroborate inputs; and
Level 3: Unobservable inputs for which there is little or no market data and which requires the owner of the assets or liabilities to develop its own assumptions about how market participants would price these assets or liabilities.
Our assessment of the significance of a particular input to the fair value measurement requires judgment and may affect the valuation of assets and liabilities and their placement within the fair value hierarchy.
Recently Issued Accounting Pronouncements
We reviewed all recently issued accounting pronouncements and concluded they are not applicable or not expected to be material to our financial statements.
Subsequent Events
The Company has evaluated subsequent events through March 29, 2022, being the date these consolidated financial statements were issued. Subsequent to December 31, 2021, the Company used cash to purchase approximately $
46
Note 2 – Details of Certain Financial Statement Components
The following tables provide details of selected balance sheet items:
December 31, | December 31, | |||||
| 2021 |
| 2020 | |||
Inventories |
| (in thousands) | ||||
Raw materials |
| $ | |
| $ | |
Work-in-process | | | ||||
Finished goods | | | ||||
Total inventories |
| $ | |
| $ | |
December 31, | December 31, | |||||
2021 | 2020 | |||||
Property, plant and equipment, net | (in thousands) | |||||
Furniture, machinery and equipment |
| $ | |
| $ | |
Leasehold improvements |
| |
| | ||
| |
| | |||
Less: accumulated depreciation |
| ( |
| ( | ||
Total property, plant and equipment, net | $ | | $ | | ||
Depreciation expense totaled $
December 31, | December 31, | |||||
2021 | 2020 | |||||
Intangible assets, net | (in thousands) | |||||
Patents and trademarks |
| $ | |
| $ | |
Less: accumulated amortization |
| ( |
| ( | ||
Total intangibles, net | $ | | $ | | ||
Amortization expense totaled $
Years ending December 31, |
| (in thousands) | |
2022 | $ | | |
2023 |
| | |
2024 |
| | |
2025 |
| | |
2026 | — | ||
Thereafter |
| — | |
$ | | ||
December 31, | December 31, | |||||
2021 | 2020 | |||||
Accrued liabilities | (in thousands) | |||||
Accrued warranty |
| $ | |
| $ | |
Accrued wages and benefits |
| |
| | ||
Accrued vacation |
| |
| | ||
Accrued other |
| |
| | ||
Total accrued liabilities | $ | | $ | | ||
47
Note 3 - Series A Convertible Preferred Stock
In October and November 2021, the Company sold to investors in a private placement exempt from registration under the Securities Act of 1933, as amended, an aggregate of
Holders of the Series A Convertible Preferred Stock generally have no voting rights. Dividends on the Series A Convertible Preferred Stock accrue daily and are payable monthly in arrears on the 15th day of the calendar month, at the rate of
The Company entered into a registration rights agreement with the investors, pursuant to which the Company agreed to register for resale by the investors the shares of common stock issuable upon conversion of the Series A Convertible Preferred Stock. The registration statement was filed on December 10, 2021, and was declared effective on December 21, 2021.
Note 4 - Stock-Based Compensation
Under the terms of our 2016 Omnibus Incentive Plan, directors, officers and key employees could be granted restricted stock units and stock awards, as well as non-qualified or incentive stock options, at the discretion of the Compensation Committee of the Board of Directors.
All stock-based payments to directors and employees, including grants of stock options and stock purchase rights, are recognized in the financial statements based on their respective grant date (measurement date) fair values. We calculate the compensation cost of full-value awards such as restricted stock units and stock awards based on the market value of the underlying stock at the date of the grant. The fair value of stock option awards is estimated at the date of grant using the Black-Scholes option pricing model; however, the value calculated using an option pricing model may not be indicative of the fair value observed in a willing buyer/willing seller market transaction, or actually realized by the employee upon exercise. Expected volatility used to estimate the fair value of options granted is based on the historical volatility of our common stock. The risk-free interest rate is based on the United States Treasury constant maturity rate for the expected life of the stock option. The expected life of a stock award is the period of time that the award is expected to be outstanding.
48
We recognize compensation expense for all stock-based awards on a straight-line basis over the requisite service period for the entire award. The amount of compensation expense recognized through the end of each reporting period is equal to the portion of the grant-date value of the awards that have vested, or for partially vested awards, the value of the portion of the award that is ultimately expected to vest for which the requisite services have been provided. The benefits of tax deductions in excess of recognized compensation cost are reported as a financing cash flow.
As of December 31, 2021, there were
Note 5 - Earnings Per Share
Basic earnings per share is computed by dividing net income (loss) applicable to common stockholders by the weighted average number of common shares outstanding during the period. Diluted earnings per share is computed by dividing net income (loss) by the weighted average number of common shares outstanding during the period, plus the dilutive effect of outstanding stock options, restricted stock units, and common shares issuable upon conversion of convertible preferred stock using the treasury stock method. The following table sets forth the computation of basic and diluted earnings per share:
Year Ended | ||||||
December 31, | ||||||
2021 | 2020 | |||||
(in thousands, except per share data) | ||||||
Net income (loss) |
| $ | ( |
| $ | |
Less: Preferred stock dividends |
| ( |
| — | ||
Net income (loss) applicable to common stockholders | $ | ( | $ | | ||
Weighted average common shares outstanding – basic |
| |
| | ||
Dilutive potential common shares from stock options, restricted stock units, and convertible preferred stock |
| — |
| | ||
Weighted average common shares outstanding – diluted |
| |
| | ||
Earnings (loss) per common share, basic | $ | ( | $ | | ||
Earnings (loss) per common share, diluted | $ | ( | $ | | ||
Shares subject to anti-dilutive stock options and restricted stock units excluded from calculation |
| — |
| | ||
Shares subject to anti-dilutive Series A Convertible Preferred Stock excluded from calculation |
| |
| — | ||
Note 6- Income Taxes
Under GAAP, we use the asset and liability method of accounting for income taxes. Under this method, deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled.
49
The components of earnings before income taxes for the years ended December 31, 2021 and 2020 were as follows:
Year Ended | ||||||
December 31, | ||||||
2021 | 2020 | |||||
(in thousands) | ||||||
Income (loss) before income taxes: | ||||||
Domestic |
| $ | ( |
| $ | ( |
Foreign |
| |
| | ||
$ | ( | $ | | |||
Income tax provision (benefit) consists of the following for the years ended December 31, 2021 and 2020:
Year Ended | ||||||
December 31, | ||||||
2021 | 2020 | |||||
(in thousands) | ||||||
Income tax provision (benefit): | ||||||
Current |
|
|
|
| ||
Federal | $ | ( | $ | ( | ||
State |
| |
| | ||
Foreign |
| |
| | ||
Total current |
| |
| | ||
Deferred: |
|
|
|
| ||
Federal |
| |
| ( | ||
State |
| |
| ( | ||
Foreign |
| ( |
| ( | ||
Total deferred |
| |
| ( | ||
Total income tax provision (benefit) | $ | | $ | ( | ||
A reconciliation of the income tax provision (benefit) by applying the statutory United States federal income tax rate to income (loss) before income taxes is as follows:
Year Ended December 31, |
| ||||||||||
2021 | 2020 |
| |||||||||
| $ |
| % |
| $ |
| % |
| |||
(in thousands, except percentages) |
| ||||||||||
Federal income tax provision (benefit) at statutory rate | $ | ( | | % | $ | | | % | |||
State tax expense net of federal tax benefit |
| ( | |
| ( | ( | |||||
Foreign taxes |
| | ( |
| | | |||||
Other |
| | ( |
| ( | ( | |||||
Change in valuation allowance |
| | |
| — | — | |||||
Income tax provision (benefit) | $ | | | % | $ | ( | ( | % | |||
50
Deferred tax assets and liabilities are recognized for future tax consequences between the carrying amounts of assets and liabilities and their respective tax basis using enacted tax rates in effect for the fiscal year in which the differences are expected to reverse. Significant deferred tax assets and liabilities, consist of the following:
December 31, | ||||||
2021 | 2020 | |||||
(in thousands) | ||||||
Deferred taxes, net | ||||||
Net operating loss carryforward |
| $ | |
| $ | |
Accruals |
| |
| | ||
Reserves |
| |
| | ||
Property, plant and equipment, and intangible assets |
| |
| | ||
Stock-based compensation expense |
| |
| | ||
Other |
| |
| | ||
Total deferred tax assets |
| |
| | ||
Valuation allowance |
| ( |
| — | ||
Net deferred tax assets | $ | | $ | | ||
Deferred taxes are recorded for the following net operating losses (“NOLs”) that can be used in future tax years:
December 31, | ||||||
2021 | 2020 | |||||
(in millions) | ||||||
Net operating losses | ||||||
Federal |
| $ |
| $ | | |
State |
|
| | |||
Foreign |
|
| | |||
$ | $ | | ||||
The federal and state NOLs expire at various dates between 2022 through 2040. Foreign NOLs are related to the jurisdictions of Singapore and Hong Kong and may be carried forward indefinitely.
The Company experienced an ownership change under IRC Section 382 in February 2010. In general, a Section 382 ownership change occurs if there is a cumulative change in our ownership by “5% shareholders” (as defined in the Internal Revenue Code of 1986, as amended) that exceeds 50 percentage points over a rolling three-year period. An ownership change generally affects the rate at which NOLs and potential other deferred tax assets are permitted to offset future taxable income. Certain state jurisdictions within which we operate contain similar provisions and limitations. As of December 31, 2021, $
Year Ended | ||||||
December 31, | ||||||
2021 | 2020 | |||||
(in millions) | ||||||
Net operating losses | ||||||
Balance at January 1, |
| $ | |
| $ | |
NOL generated (utilized) |
| |
| | ||
NOL expired unused |
| — |
| — | ||
Other, including changes in foreign exchange rates |
| — |
| — | ||
Balance at December 31, | $ | | $ | | ||
51
Management assesses the available positive and negative evidence to estimate if sufficient future taxable income will be generated to utilize the existing deferred tax assets. We analyzed our need to record a valuation allowance against our otherwise recognizable net deferred tax assets in the federal, state and foreign jurisdictions, and we determined that a valuation allowance on federal and state deferred tax assets was necessary at December 31, 2021, while no valuation allowance on foreign deferred tax assets was necessary at December 31, 2021. One objective negative piece of evidence we evaluated was our cumulative domestic loss incurred over the three-year period ended December 31, 2021. Such objective negative evidence limits our ability to consider other subjective evidence, such as our projections for future profitability. On the basis of this evaluation, as of December 31, 2021, a valuation allowance of $
The Internal Revenue Code includes a provision, referred to as Global Intangible Low-Taxed Income (“GILTI”), which provides for a
Of the $
The Company is subject to taxation in the U.S. and various states and foreign jurisdictions. U.S. federal income tax returns after 2017 remain open to examination. We and our subsidiaries are also subject to income tax in multiple state and foreign jurisdictions. Generally, state and foreign income tax returns after 2016 remain open to examination. No income tax returns are currently under examination. As of December 31, 2021 and 2020, the Company does not have any unrecognized tax benefits, and continues to monitor its current and prior tax positions for any changes. The Company recognizes penalties and interest related to unrecognized tax benefits as income tax expense. For the years ended December 31, 2021 and 2020, there were
Note 7 - Significant Customers, Concentrations of Credit Risk and Geographic Information
We manage and operate our business through
Net revenues from customers equal to, or greater than, 10% of total net revenues are as follows:
Year ended December 31, |
| ||||
| 2021 |
| 2020 |
| |
Customer A |
| | % | | % |
Customer B |
| | % | | % |
Customer C |
| | % | | % |
Net revenues by geographic area are as follows:
Year ended December 31, | ||||||
| 2021 |
| 2020 | |||
| (in thousands) | |||||
United States | $ | | $ | | ||
Asia and Middle East |
| |
| | ||
Europe and other |
| |
| | ||
Revenue, net | $ | | $ | | ||
Revenues by geographic area are based on the country of shipment destination. The geographic location of distributors and third-party manufacturing service providers may be different from the geographic location of the purchasers and/or ultimate end users.
52
We provide credit only to creditworthy third parties who are subject to our credit verification procedures. Accounts receivable balances are monitored on an ongoing basis, and accounts deemed to have credit risk are fully reserved. At December 31, 2021,
Our long-lived assets were geographically located as follows:
| December 31, |
| December 31, | |||
| 2021 |
| 2020 | |||
| (in thousands) | |||||
United States | $ | | $ | | ||
Asia |
| |
| | ||
Total long-lived assets | $ | | $ | | ||
Note 8 – Retirement Savings Plan
We have a qualified retirement plan under the provisions of Section 401(k) of the Internal Revenue Code covering all U.S. employees. Participants in this plan may contribute between
Note 9 – Paycheck Protection Program Loan
In April 2020, the Company received a loan in the aggregate principal amount of $
Note 10 - Related Party Transactions
Qualstar Corporation (OTCMKTS:QBAK)
Qualstar Corporation (OTCMKTS:QBAK) (“Qualstar”) is a related party. Steven N. Bronson, our Chairman of the Board, President and Chief Executive Officer, is also the President, Chief Executive Officer and a director of Qualstar. Ryan J. Hoffman, our Chief Financial Officer, is also the Chief Financial Officer of Qualstar. Mr. Bronson, together with BKF Capital Group, Inc. (OTCMKTS:BKFG) which he controls, has a controlling interest in both Interlink and Qualstar. We have a facilities agreement with Qualstar to allow Qualstar to use of a portion of our Irvine, California office facility, for which we have agreed to split substantially all rent and lease-related costs on an apportioned basis according to the approximate relative usage levels by each entity. Qualstar also has a facilities agreement with us to allow us to use of a portion of its Camarillo, California office and warehouse facility, for which we have agreed to split substantially all rent and lease-related costs on an apportioned basis according to the approximate relative usage levels by each entity. In addition, we have various consulting agreements with Qualstar for certain of our respective employees and/or independent contractors that provide certain operational, sales, marketing, general and administrative services to the other
53
entity. Interlink and Qualstar also agree to reimburse, or be reimbursed by, one another for expenses paid by one company on behalf of the other. Transactions with Qualstar and its subsidiaries are as follows:
Year ended December 31, | ||||||||||||
| 2021 | 2020 | ||||||||||
| Due from Qualstar |
| Due to Qualstar |
| Due from Qualstar |
| Due to Qualstar | |||||
| (in thousands) | |||||||||||
Balance at January 1, | $ | | $ | | $ | | $ | | ||||
|
|
|
| |||||||||
Billed (or accrued) to Qualstar by Interlink |
| |
| — |
| |
| — | ||||
Paid by Qualstar to Interlink |
| ( |
| — |
| ( |
| — | ||||
|
|
|
| |||||||||
Billed (or accrued) to Interlink by Qualstar |
| — |
| |
| — |
| | ||||
Paid by Interlink to Qualstar |
| — |
| ( |
| — |
| ( | ||||
Balance at December 31, | $ | | $ | | $ | | $ | | ||||
BKF Capital Group, Inc. (OTCMKTS:BKFG)
BKF Capital Group, Inc. (OTCMKTS:BKFG) (“BKF Capital”) is a related party. Steven N. Bronson, our Chairman of the Board, President and Chief Executive Officer, is also the Chief Executive Officer and Chairman of BKF Capital. Ryan J. Hoffman, our Chief Financial Officer, is also the Chief Financial Officer of BKF Capital. Mr. Bronson, together with BKF Capital, has a controlling interest in Interlink. We previously had a facilities agreement with BKF Capital under which BKF Capital was allowed to use a portion of our Irvine, California office facility, for which we had agreed to split substantially all rent and lease-related costs on an apportioned basis according to the approximate relative usage levels by each entity. In addition, we have consulting agreements with BKF Capital for certain of our respective employees and/or independent contractors that provide certain operational and general and administrative services to the other entity. Interlink and BKF Capital also agree to reimburse, or be reimbursed by, one another for expenses paid by one company on behalf of the other. Transactions with BKF Capital and its subsidiaries are as follows:
Year ended December 31, | ||||||||||||
2021 | 2020 | |||||||||||
| Due from |
| Due to |
| Due from |
| Due to | |||||
BKF Capital | BKF Capital | BKF Capital | BKF Capital | |||||||||
| (in thousands) | |||||||||||
Balance at January 1, | $ | — | $ | — | $ | — | $ | — | ||||
Billed (or accrued) to BKF Capital by Interlink |
| |
| — |
| |
| — | ||||
Paid by BKF Capital to Interlink |
| ( |
| — |
| ( |
| — | ||||
Billed (or accrued) to Interlink by BKF Capital |
| — |
| |
| — |
| — | ||||
Paid by Interlink to BKF Capital |
| — |
| ( |
| — |
| — | ||||
Balance at December 31, | $ | | $ | — | $ | — | $ | — | ||||
Note 11 – Commitments and Contingencies
Lease Agreements
We lease facilities under non-cancellable operating leases. The leases expire at various dates through fiscal 2023 and frequently include renewal provisions for varying periods of time, provisions which require us to pay taxes, insurance and maintenance costs, and provisions for minimum rent increases. Minimum leases payments, including scheduled rent increases are recognized as rent expenses on a straight-line basis over the term of the lease.
The rate implicit in each lease is not readily determinable, and we therefore use our incremental borrowing rate to determine the present value of the lease payments. The weighted average incremental borrowing rate used to determine the initial value of ROU assets and lease liabilities capitalized during the years ended December 31, 2021 and 2020 was
54
ROU assets for operating leases are periodically reduced by impairment losses. We use the long-lived assets impairment guidance in ASC Subtopic 360-10, Property, Plant and Equipment – Overall, to determine whether a ROU asset is impaired, and if so, the amount of the impairment loss to recognize. As of December 31, 2021, we have not recognized any impairment losses for our ROU assets.
We monitor for events or changes in circumstances that require a reassessment of our leases. When a reassessment results in the remeasurement of a lease liability, a corresponding adjustment is made to the carrying amount of the corresponding ROU asset unless doing so would reduce the carrying amount of the ROU asset to an amount less than zero. In that case, the amount of the adjustment that would result in a negative ROU asset balance is recorded in profit or loss.
In June 2020, the Company entered into a sublease agreement to lease
The Company leases a
The Company leases a
The Company leases a
The Company leases a
As of December 31, 2021, the Company had current and long-term lease liabilities of $
Future minimum lease payments under non-cancellable operating leases that have remaining non-cancellable lease terms in excess of one year are as follows:
Years ending December 31, |
| (in thousands) | |
2022 | $ | | |
2023 |
| | |
2024 |
| — | |
2025 |
| — | |
2026 | — | ||
Thereafter |
| — | |
Total undiscounted future non-cancelable minimum lease payments |
| | |
Less: imputed interest |
| ( | |
Present value of lease liabilities | $ | | |
During the year ended December 31, 2021, we recognized approximately $
Litigation
55
We are not party to any material legal proceedings at December 31, 2021. We are occasionally involved in legal proceedings in the ordinary course of business, including actions against us which assert or may assert claims or seek to impose fines and penalties in substantial amounts. Related legal defense costs are expensed as incurred.
Warranties
We establish reserves for future product warranty costs that are expected to be incurred pursuant to specific warranty provisions with our customers. We generally warrant our products against defects for
Intellectual Property Indemnities
We indemnify certain customers and our contract manufacturers against liability arising from third-party claims of intellectual property rights infringement related to our products. These indemnities appear in development and supply agreements with our customers as well as manufacturing service agreements with our contract manufacturers, are not limited in amount or duration and generally survive the expiration of the contract. Given that the amount of any potential liabilities related to such indemnities cannot be determined until an infringement claim has been made, we are unable to determine the maximum amount of losses that we could incur related to such indemnifications.
Director and Officer Indemnities and Contractual Guarantees
We have entered into indemnification agreements with our directors and executive officers, which require us to indemnify such individuals to the fullest extent permitted by Nevada law. Our indemnification obligations under such agreements are not limited in amount or duration. Certain costs incurred in connection with such indemnifications may be recovered under certain circumstances under various insurance policies. Given that the amount of any potential liabilities related to such indemnities cannot be determined until a lawsuit has been filed, we are unable to determine the maximum amount of losses that we could incur relating to such indemnities.
We have also entered into an employment agreement with Steven N. Bronson, our Chairman of the Board, President and Chief Executive Officer. This agreement contains certain severance and change in control obligations. Under the agreement, if Mr. Bronson’s employment is terminated due to his death or disability (as such terms are defined in the agreement), Mr. Bronson or his beneficiaries will be entitled to receive: (i) his base compensation to the end of the monthly pay period immediately following the date of termination; (ii) accrued bonus payments; and (iii) all unvested equity and/or options issued by the Company shall immediately fully vest. If Mr. Bronson’s employment is terminated by him for good reason (as such term is defined in the agreement), or by us without cause, then Mr. Bronson will be entitled to receive: (i) his base compensation to the date of termination; (ii) a severance payment equal to
In the event of a change in control of the Company (as such term is defined in the agreement), Mr. Bronson is entitled to receive: (i) a change in control payment in an amount equal to twelve months of his base compensation, payable as of the date the change in control occurs; and (ii) all unvested equity and/or options issued by the Company shall immediately fully vest.
Guarantees and Indemnities
In the normal course of business, we are occasionally required to undertake indemnification for which we may be required to make future payments under specific circumstances. We review our exposure under such obligations no less than annually, or more frequently as required. The amount of any potential liabilities related to such obligations cannot be accurately determined until a formal claim is filed. Historically, any such amounts that become payable have not had a material negative effect our business, financial condition or results of operations. We maintain general and product liability insurance which may provide a source of recovery to us in the event of an indemnification claim.
56
ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
None.
ITEM 9A. CONTROLS AND PROCEDURES
Evaluation of Disclosure Controls and Procedures
The phrase “disclosure controls and procedures” refers to controls and procedures designed to ensure that information required to be disclosed in our reports filed or submitted under the Securities Exchange Act of 1934, as amended, or the Exchange Act, such as this Annual Report on Form 10-K, is recorded, processed, summarized and reported within the time periods specified in the rules and forms of the SEC. Disclosure controls and procedures are also designed to ensure that such information is accumulated and communicated to our management, including our chief executive officer, or CEO, and chief financial officer, or CFO, as appropriate to allow timely decision regarding required disclosure.
Our management, with the participation of our CEO and CFO, has evaluated the effectiveness of our disclosure controls and procedures (as defined in Rules 13a- 15(e) and 15d- 15(e) under the Exchange Act), as of December 31, 2021, the end of the period covered by this Annual Report on Form 10-K. Based on such evaluation, our CEO and CFO have concluded that as of December 31, 2021, our disclosure controls and procedures were designed at a reasonable assurance level and were effective to provide reasonable assurance that information we are required to disclose in reports that we file or submit under the Exchange Act is recorded, processed, summarized, and reported within the time periods specified in the rules and forms of the SEC, and that such information is accumulated and communicated to our management, including our CEO and CFO, as appropriate, to allow timely decisions regarding required disclosure.
Management’s Report on Internal Control over Financial Reporting
Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rules 13a-15(f) and 15d-15(f). Under the supervision and with the participation of management, including our CEO and CFO, we conducted an evaluation of the effectiveness of our internal controls over financial reporting based on the framework in Internal Control – Integrated Framework (2013 Framework) issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on this evaluation, management has concluded that our internal control over financial reporting was effective as of December 31, 2021.
This Annual Report on Form 10-K does not include an attestation report of our independent registered public accounting firm regarding our internal control over financial reporting due to an exemption established for smaller reporting companies.
Changes in Internal Controls over Financial Reporting
There was no change in our internal control over financial reporting identified in management’s evaluation pursuant to Rules 13a-15(d) or 15d-15(d) of the Exchange Act during the quarter ended December 31, 2021 that materially affected, or is reasonable likely to materially affect, our internal control over financial reporting.
Limitations on Effectiveness of Controls and Procedures
The Company's internal control over financial reporting includes policies and procedures that (1) pertain to maintenance of records that, in reasonable detail, accurately and fairly reflect transactions and dispositions of the assets of the Company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the Company's assets that could have a material effect on the financial statements.
58
Our management, including our CEO and CFO, does not expect that our disclosure controls or our internal control over financial reporting will prevent or detect all errors and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met. Internal control over financial reporting is a process that involves human diligence and compliance and is subject to lapses in judgment and breakdowns resulting from human failures. In addition, the design of any system of controls is based in part on certain assumptions about the likelihood of future events, and controls may become inadequate if conditions change. There can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions.
ITEM 9B. OTHER INFORMATION
None.
ITEM 9C. DICLOSURE REGARDING FOREIGN JURISDICTIONS THAT PREVENT INSPECTION
None.
PART III
ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
Executive Officers and Directors
Our business affairs are managed under the direction of our board of directors, which is currently composed of four members. Each director’s term will continue until the election and qualification of his or her successor, or his or her earlier death, resignation, or removal. Our executive officers are appointed by our board of directors and serve until their successors have been duly elected and qualified. There are no family relationships among any of our directors or executive officers.
The following table provides information regarding our directors and executive officers as of December 31, 2021:
Name |
| Age |
| Company Position |
Steven N. Bronson |
| 56 |
| Chairman of the Board, President, and Chief Executive Officer |
Ryan J. Hoffman |
| 43 |
| Chief Financial Officer and Secretary |
Gene Chen, PhD |
| 50 |
| Vice President of Engineering Advanced Materials |
Joy C. Hou |
| 46 |
| Director |
David J. Wolenski |
| 60 |
| Director |
Maria N. Fregosi |
| 56 |
| Director |
Executive Officers
Steven N. Bronson. Mr. Bronson has over 37 years of business and entrepreneurial experience. His successful background in investment banking, operations, and management has led him to acquire meaningful stakes in several promising technology companies and assuming CEO roles. Mr. Bronson became the Chairman and CEO of Interlink Electronics in 2010. Less than a year later, in 2011, he also took on the role of President, bringing both his operational and financial expertise to the company. Since successfully returning Interlink's business to profitability, Mr. Bronson has focused on strategic matters, mission-critical decisions, and the identification of potential acquisitions and business partnership opportunities.
In July 2013, Mr. Bronson assumed the positions of President and CEO of Qualstar Corporation (OTCMKTS: QBAK)—a high-quality tape library manufacturer—and its subsidiary N2Power, a manufacturer of high efficiency power supplies for diverse electronics industries. He immediately initiated a turnaround strategy, implementing cost-cutting measures and aggressive sales efforts. Since October 2008, Mr. Bronson has held the position of Chairman, President, and CEO of BKF Capital Group, Inc. (OTCMKTS: BKFG) a publicly traded company operating through its wholly-owned subsidiaries, BKF Asset Holdings, Inc., which invests in publicly and privately owned businesses, and Bronson Financial LLC, a FINRA member investment banking firm (providing MA advisory and capital raising services to lower and middle-market companies). In addition, Mr. Bronson served on the
59
board of Mikron Infrared Instruments, Inc. from September 1996 to July 2000. During a restructuring period spanning August 1998 to May 1999, he was appointed Mikron’s Chairman and CEO. Mr. Bronson led the effort of recruiting a top-notch management team, eventually increasing the company’s revenue by 500 percent; it was sold in April 2007. Mr. Bronson is also the Chairman, President, and Chief Executive Officer of Ridgefield Acquisition Corp. (OTCMKTS: RDGA) since 1996. Ridgefield Acquisition Corp. is a public shell that is seeking a merger, acquisition, or business combination with a viable operating entity.
Mr. Bronson currently holds the Series 4, 7, 24, 27, 53, 55, and 79 licenses.
Ryan J. Hoffman. Mr. Hoffman has served as our Chief Financial Officer since November 2020, joining Interlink with more than two decades of auditing and professional services experience accrued at two top global public accounting firms. He previously spent 16 years at the accounting firm RSM US LLP and was a partner there for his last five years. At RSM, he successfully led audits of global companies in industries that include technology, consumer products, and manufacturing, and cultivated a specialization in software and multiple-element revenue recognition accounting and auditing. Prior to that, he worked for the Big Four accounting firm Ernst Young. Mr. Hoffman graduated with a degree in accounting from Chapman University and is a licensed CPA. He is also the Chief Financial Officer of Qualstar Corporation (OTCMKTS: QBAK) and BKF Capital Group, Inc. (OTCMKTS: BKFG).
Gene Chen, PhD. Dr. Chen joined Interlink in May 2021 as our Vice President of Engineering Advanced Materials. Dr. Chen has more than two decades of experience in advanced materials and electronic devices and has taken leadership roles in a wide variety of technical fields, including force sensing and human machine interface (HMI) technology. Prior to joining Interlink, from 2016 to 2021 he was CTO at force sensor company New Degree Technology, where he led its RD and product development teams. Prior to that, he is the founding member of Pixelligent Technologies, LLC and served as VP of Engineering from 2009 to 2016. His diverse, interdisciplinary background has also included roles managing projects working on nanomaterials and advanced materials for applications ranging from LEDs and OLEDs to semiconductors to dielectric coatings for spaceships. Dr. Chen has also served on numerous grant review panels for the National Science Foundation and Department of Energy. Dr. Chen earned a doctorate of philosophy in electrical engineering – focusing on electro-physics and microelectronics – from the University of Maryland, College Park. An active member of the scientific community, he holds 14 patents, has published 17 scientific papers, and has sat on multiple peer review panels. Dr. Chen leads Interlink’s RD and materials science laboratory in Camarillo, California, and directs Interlink’s global engineering team.
Non-Employee Directors
Maria N. Fregosi. Ms. Fregosi joined our board of directors in February 2021. Ms. Fregosi is Chief Investment Officer of Home Point Capital Inc. (NASDAQ:HMPT), a leading residential mortgage originator and servicer, where she is responsible for managing and monitoring the company’s investments. Ms. Fregosi is a founding member of Home Point Capital, and previously served as its Chief Financial Officer from 2018 to 2020 as well as its Chief Strategy Officer and Chief Capital Markets Officer from 2015 to 2018. Ms. Fregosi has served as a member of the Board of Home Point Mortgage Acceptance Corp. since 2020. Prior to joining Home Point Capital, Ms. Fregosi served as Chief Capital Markets Officer for Hamilton Group Funding, a retail mortgage loan originator. In addition, Ms. Fregosi previously served as the Chief Operating Officer and Chief Compliance Officer of Catalyst Financial, a full-service value-based investment banking firm, and simultaneously the Chief Operating Officer for BKF Capital Group, Inc., a publicly traded investment company founded by Steven Bronson, our Chief Executive Officer. Ms. Fregosi also served as Chief Operating Officer and Chief Financial Officer of Client First Settlement Funding, a boutique specialty finance company, and as an Executive Vice President at ABN AMRO Bank. Ms. Fregosi holds a Master of Business Administration in Finance from the University of Rochester’s Simon School and is a Summa Cum Laude graduate with a Bachelor of Arts in Economics from SUNY Buffalo State College.
Ms. Fregosi was selected to serve on our board of directors because of her extensive business experience in working with publicly held companies in the investment banking and financial services industries.
Joy C. Hou. Ms. Hou joined our board of directors in June 2020. Ms. Hou presently is the CEO and Co-Founder of MREN, Inc., an enterprise technology platform serving the commercial real estate industry since 2013. Ms. Hou has over 30 years of business and entrepreneurial experience in finance, technology, and management. Prior to MREN, Ms. Hou was the CEO and Co- Founder of RAISC, Inc., a tech-enabled bank distressed asset platform that centralized data for over $3B of commercial real estate assets and supported the disposition of over $1.5B of assets. In addition, Ms. Hou spent over 10 years on Wall Street where she held various debt and equity investment positions at Donaldson, Lufkin Jenrette, Lehman Brothers and served as the Head of Hospitality Practice at
60
Barclays Capital. Ms. Hou is currently on the Board of Cornell Asian Alumni Association as the Vice President of University Relations and had previously served on the Board of Country Montessori School. Ms. Hou holds a Bachelor of Science degree from Cornell University’s School of Hotel Administration with Distinction.
Ms. Hou was selected to serve on our board of directors because of her extensive business experience in working with technology companies, as both a Wall Street banker and entrepreneur.
David J. Wolenski. Mr. Wolenski joined our board of directors in June 2020. He currently serves as President and on the Board of Directors of Electro-Mechanical Products, Inc., a privately held company engaged in the manufacture of precision-machined components and thermal management systems for the semiconductor, laser, and medical device industries. From 1996 to 2000, Mr. Wolenski was Chief Executive Officer of OZO Automation, Inc. (OTCBB: OZOA), a publicly-traded company that produced robotic workstations for the electronics industry. As Chief Executive Officer, he also managed the sale of OZO’s assets to JOT Automation of Olunsalo, Finland, and served as President of their Depaneling subsidiary from 2000 to 2001. From 1983 to 1996, Mr. Wolenski held various positions with Johns Manville Corporation, a worldwide leader in fiberglass insulations and engineered products, which included managerial assignments in manufacturing, business development, and quality assurance. Mr. Wolenski currently serves on the board of directors of Qualstar Corporation (OTCMKTS: QBAK), a position he has held since 2013. His past board affiliations have included OZO Automation, Inc., where he was a director from 1996 to 1999, and Bio-Medical Automation, Inc., where he was a director from 1999 to 2000. Mr. Wolenski holds a BS degree in Mechanical Engineering from the University of Colorado at Boulder (1983), and an MBA from the University of Colorado at Denver (1990).
Mr. Wolenski was selected to serve on our board of directors because of his senior executive management experience at privately-held and publicly-held manufacturing companies and his prior experience as a director of other companies.
Code of Ethics
Interlink has adopted a written Code of Business Conduct and Ethics, which complies with the requirements for a code of ethics pursuant to Item 406(b) of Regulation S-K under the Exchange Act, which applies to our chief executive officer, chief financial officer and persons performing similar functions. A copy of the Code of Business Conduct and Ethics is posted on the “Investors” section of our website at www.interlinkelectronics.com. We will post amendments to our Code of Business Conduct and Ethics or waivers of our Code of Business Conduct and Ethics for directors and executive officers on the same website. A copy of the Code of Business Conduct and Ethics will be provided, without charge, to any shareholder who sends a written request to our Chief Financial Officer at Interlink Electronics, Inc., 1 Jenner, Suite 200, Irvine, CA 92618.
Stockholder Recommendations and Nominations of Candidates for Election to the Board of Directors
Our board of directors has established a nominating and governance committee, which is responsible for, among other things: evaluating and making recommendations regarding the composition, organization and governance of our board of directors and its committees; identifying, recruiting and nominating director candidates to the board if and when necessary; evaluating and making recommendations regarding the creation of additional committees or the change in mandate or dissolution of committees; reviewing and making recommendations with regard to our corporate governance guidelines and compliance with laws and regulations; and reviewing and approving conflicts of interest of our directors and corporate officers, other than related person transactions reviewed by the audit committee.
The nominating and governance committee employs a variety of methods for identifying and evaluating director nominees. In its evaluation of director candidates, the nominating and governance committee will consider the current size and composition of the board of directors and the needs of the board of directors and the respective committees of the board of directors. Some of the qualifications that the committee considers include, without limitation, issues of character, integrity, judgment, diversity of experience, independence, area of expertise, corporate experience, length of service, potential conflicts of interest and other commitments. The nominating and governance committee requires the following minimum qualifications to be satisfied by any nominee for a position on our board of directors: (i) the highest personal and professional ethics and integrity, (ii) proven achievement and competence in the nominee’s field and the ability to exercise sound business judgment, (iii) skills and expertise that are complementary to those of the existing members of our board of directors, (iv) the ability to assist and support management and make significant contributions to the company’s success, and (v) an understanding of the fiduciary responsibilities that are required of a member of our board of directors, and the commitment of time and energy necessary to diligently carry out those responsibilities.
61
Other than the foregoing, there are no stated minimum criteria for director nominees, although the nominating and governance committee may also consider other factors that it may deem, from time to time, in our and our stockholders’ best interests. The nominating and governance committee may also take measures that it considers appropriate in connection with its evaluation of a director candidate, including candidate interviews, inquiry of the person or persons making the recommendation or nomination, engagement of an outside search firm to gather additional information, or reliance on the knowledge of the members of the nominating and governance committee, the board of directors, or management.
Although the board of directors does not maintain a specific policy with respect to board diversity, the board of directors believes that the board should be a diverse body, and the nominating and governance committee considers a broad range of backgrounds and experiences. In making determinations regarding nominations of directors, the nominating and governance committee may take into account the benefits of diverse viewpoints. After completing its review and evaluation of director candidates, the nominating and governance committee recommends to the full board of directors the director nominees for election. The nominating and governance committee also considers these and other factors as it oversees the annual board of director and committee evaluations.
The nominating and governance committee will consider candidates for nomination to the board of directors recommended by any stockholder holding at least one percent (1%) of the fully diluted capitalization of Interlink for at least twelve months prior to the date that the recommendation is submitted. The committee will evaluate recommendations in accordance with its charter, our bylaws, our policies and procedures for director candidates, as well as the nominee criteria described above. This process is designed to ensure that the board of directors includes members with diverse backgrounds, skills and experience, including appropriate financial and other expertise relevant to our business. A stockholder wishing to recommend a candidate for nomination should contact our Secretary in writing, at the address indicated in the next paragraph. The recommendation must include the candidate’s name, home and business contact information, detailed biographical data, relevant qualifications, a signed letter from the candidate confirming willingness to serve on our board of directors, information regarding any relationships between the candidate and Interlink and evidence of the recommending stockholder’s ownership of our common stock. The recommendation must also include a statement from the recommending stockholder in support of the candidate, particularly within the context of the criteria for board of directors membership. Our nominating and governance committee has sole discretion to decide which individuals to recommend for nomination as directors.
A stockholder of record can nominate a candidate directly for election to the board by complying with the rules and regulations of the Securities and Exchange Commission. An eligible stockholder who wishes to submit a nomination should review the statutory requirements for nominations by stockholders. Any nomination should be sent in writing to the company, addressed to the attention of the Secretary at Interlink Electronics, Inc., 1 Jenner, Suite 200, Irvine, California 92618. The notice must comply with applicable federal and state law.
Audit Committee
Our board of directors has established an audit committee, which is responsible for, among other things: appointing, overseeing, and if need be, terminating any independent auditor; assessing the qualification, performance and independence of our independent auditor; reviewing the audit plan and pre-approving all audit and non-audit services to be performed by our independent auditor; reviewing our financial statements and related disclosures; reviewing the adequacy and effectiveness of our accounting and financial reporting processes, systems of internal control and disclosure controls and procedures; reviewing our overall risk management framework; overseeing procedures for the treatment of complaints on accounting, internal accounting controls, or audit matters; reviewing and discussing with management and the independent auditor the results of our annual audit, reviews of our quarterly financial statements and our publicly filed reports; reviewing and approving related person transactions; and preparing the audit committee report that the SEC requires in our annual proxy statement.
Ms. Fregosi, Mr. Wolenski and Ms. Hou, each of whom is a non-employee member of our board of directors, serve on our audit committee. Our board of directors has determined that each of the members of the audit committee satisfies the requirements for independence and financial literacy under the rules and regulations of the SEC as well as those applicable to companies listed on The Nasdaq Stock Market. Our board of directors also has determined that Ms. Fregosi qualifies as an “audit committee financial expert,” as defined in the SEC rules, and satisfies the financial sophistication requirements of Nasdaq.
ITEM 11. EXECUTIVE COMPENSATION
62
Processes and Procedures for Compensation Decisions
The compensation committee of our board of directors is responsible for the executive compensation programs for our executive officers and reports to the board on its discussions, decisions and other actions. Typically, our chief executive officer makes recommendations to our compensation committee, often attends committee meetings and is involved in the determination of compensation for the executive officers that report to him, except that he does not make recommendations as to his own compensation. Our chief executive officer makes recommendations to our compensation committee regarding short-term and long-term compensation for all executive officers, excluding himself, based on our results, an individual executive officer’s contribution toward these results and performance toward individual goal achievement. Our compensation committee then reviews the recommendations and other data and makes decisions as to total compensation for each executive officer other than the chief executive officer, as well as each individual compensation component. The compensation committee makes recommendations to the board regarding compensation for the chief executive officer. The independent members of the board make the final decisions regarding executive compensation for our chief executive officer.
The compensation committee is authorized to retain the services of one or more executive compensation advisors, as it sees fit, in connection with the establishment of our compensation programs and related policies. The compensation committee has not retained the services of a compensation consultant since 2016.
Summary Compensation Table
The following table provides information regarding the compensation of our named executive officers during 2021 and 2020. As a “smaller reporting company,” as such term is defined in the rules promulgated under the Exchange Act, we are required to provide compensation disclosure for our principal executive officer and the two most highly compensated executive officers other than our principal executive officer. Throughout this proxy statement, these three officers are referred to as our “named executive officers.”
All Other | ||||||||||
Salary | Bonus(1) | Compensation(2) | Total | |||||||
Name and Principal Position |
| Year |
| ($) |
| ($) |
| ($) |
| ($) |
Steven N. Bronson |
| 2021 |
| 300,000 |
| 100,000 |
| 1,677 |
| 401,677 |
Chief Executive Officer, President, and Chairman of the Board |
| 2020 |
| 300,000 |
| — |
| 1,677 |
| 301,677 |
Ryan J. Hoffman(3) |
| 2021 |
| 94,379 |
| 50,000 |
| 697 |
| 145,076 |
Chief Financial Officer |
| 2020 |
| 12,079 |
| — |
| 16 |
| 12,095 |
Gene Chen, PhD(4) |
| 2021 |
| 103,713 |
| 10,000 |
| 250 |
| 113,963 |
Vice President of Engineering Advanced Materials |
| 2020 |
| — |
| — |
| — |
| — |
| (1) | Consists of discretionary cash bonuses awarded by our compensation committee. |
| (2) | Consists of the taxable cost of group term life insurance coverage, 401(k) employer matching contributions, and other miscellaneous compensation. |
| (3) | Mr. Hoffman joined Interlink in November 2020. Mr. Hoffman also serves as Chief Financial Officer for Qualstar Corporation and BKF Capital Group, Inc. Accordingly, a portion his compensation is charged to Qualstar Corporation and BKF Capital Group, Inc. based on the approximate amount of time Mr. Hoffman devotes to Interlink, Qualstar Corporation, and BKF Capital Group, Inc. The amounts presented in this table represent the net portion of his compensation charged to and incurred by Interlink. |
| (4) | Dr. Chen joined Interlink in May 2021. |
Outstanding Equity Awards at Fiscal Year End
None
63
Executive Officer Employment Letters
We have entered into employment agreements with each of the named executive officers. With the exception of his own arrangement, each of these employment agreements was negotiated on our behalf by our Chief Executive Officer with the oversight and approval of the compensation committee of the board.
Steven N. Bronson
We entered into an employment agreement with Steven N. Bronson, our Chairman, President and Chief Executive Officer, on July 7, 2016. The employment agreement was for an original term of one year and automatically renews for additional one-year periods unless either party elects not to renew or it is otherwise terminated, in either case pursuant to its terms.
Pursuant to his employment agreement, Mr. Bronson receives an annual base salary, currently $300,000, and is entitled to earn and receive bonus compensation based upon the achievement of performance goals, as determined by our compensation committee, in accordance with a bonus plan adopted by us for the applicable year. Mr. Bronson also is entitled to participate in our benefit plans, including health insurance, life insurance, disability insurance, and retirement plans.
If Mr. Bronson’s employment terminates due to his death or disability, Mr. Bronson or his beneficiaries will be entitled to receive his base compensation to the end of the monthly pay period immediately following the date of termination and any accrued bonus payments, and all of Mr. Bronson’s unvested and outstanding equity awards shall immediately vest and become exercisable.
If Mr. Bronson’s employment is terminated by him for “good reason”, or by us without “cause”, Mr. Bronson will be entitled to receive his base compensation to the date of termination, severance pay equal to twelve months of his base compensation, any earned bonus compensation, employee benefits for twelve months following the date of termination, and any vested company match 401(k) or other retirement contribution, and all of Mr. Bronson’s unvested and outstanding equity awards shall immediately vest and become exercisable.
Mr. Bronson’s employment agreement also provides that upon a “change of control” of Interlink, Mr. Bronson is entitled to receive an amount in cash equal to twelve months of his base salary then in effect, and all of Mr. Bronson’s unvested and outstanding equity awards shall immediately vest and become exercisable.
Ryan J. Hoffman
We entered into an employment arrangement with Ryan J. Hoffman, our Chief Financial Officer, in November 2020. The employment arrangement provides for an annual base salary, which currently is $190,000 and a discretionary annual bonus. Because Mr. Hoffman also serves as Chief Financial Officer for Qualstar Corporation and BKF Capital Group, Inc., a portion his compensation is charged to Qualstar Corporation and BKF Capital Group, Inc. based on the approximate amount of time Mr. Hoffman devotes to Interlink, Qualstar Corporation, and BKF Capital Group, Inc. Mr. Hoffman’s employment arrangement provides for “at will” employment and may be terminated at any time by either party. Mr. Hoffman is not entitled to any termination or “change of control” payments or benefits under his employment agreement.
Gene Chen, PhD
We entered into an employment arrangement with Dr. Chen, our Vice President of Engineering Advanced Materials, in May 2021. The employment arrangement provides for an annual base salary, which currently is $165,000 and a discretionary annual bonus. Dr. Chen’s employment arrangement provides for “at will” employment and may be terminated at any time by either party. Dr. Chen is not entitled to any termination or “change of control” payments or benefits under his employment agreement.
Pension Benefits and Nonqualified Deferred Compensation
We do not provide a pension plan for our employees, and none of our named executive officers participated in a nonqualified deferred compensation plan in 2021.
401(k) Plan
64
We maintain a tax-qualified retirement plan, or the 401(k) plan, that provides eligible employees with an opportunity to save for retirement on a tax-advantaged basis. Eligible employees are able to participate in the 401(k) plan as of the first day of the month following the date they meet the 401(k) plan’s eligibility requirements, and participants are able to defer up to 60% of their eligible compensation subject to applicable annual Code limits. All participants’ interests in their deferrals are 100% vested when contributed. The 401(k) plan permits us to make matching contributions and profit-sharing contributions to eligible participants. The match is limited to 50% of base salary up to $500.
Non-Employee Director Compensation
Director Compensation Table
The following table details the total compensation earned by our non-employee directors in fiscal year 2021:
Fees Earned or | ||||||
Paid in Cash | Stock Awards(1) | Total | ||||
Director |
| ($) |
| ($) |
| ($) |
Joy C. Hou(2) |
| 15,000 |
| 5,000 |
| 20,000 |
David J. Wolenski(2) |
| 15,000 |
| 5,000 |
| 20,000 |
Maria N. Fregosi(2)(3) |
| 8,750 |
| 10,000 |
| 18,750 |
| (1) | Represents awards of our common stock. These amounts represent the grant date fair value of the stock awards granted in fiscal year 2021 determined in accordance with ASC Topic 718. These amounts may not correspond to the actual value eventually realized by the director, which depends in part on the market value of our common stock in future periods. Assumptions used in calculating these amounts are set forth in the Notes to Consolidated Financial Statements included elsewhere in this Form 10-K. |
| (2) | On July 16, 2021, each of Ms. Hou, Mr. Wolenski and Ms. Fregosi received 535 shares of our common stock as partial payment of their annual compensation for service on our board of directors. |
| (3) | Ms. Fregosi became a director in February 2021. Ms. Fregosi received an initial award of 343 shares of our common stock in March 15, 2021 as part of her initial compensation for joining our board of directors. |
No director held stock options or restricted stock awards as of December 31, 2021.
Outside Director Compensation Policy
Our board of directors has adopted a policy for the compensation for our non-employee directors, or the Outside Directors. Outside Directors will receive compensation in the form of equity and cash, as described below:
| ● | Initial Equity Award. Each person who first becomes an Outside Director will be granted common stock with a grant date fair value equal to $5,000. These awards will be granted on the date of the first meeting of our board of directors or compensation committee occurring on or after the date on which the individual first became an Outside Director. |
| ● | Annual Equity Award. Annually, on July 15, each Outside Director who has served on our board of directors for at least the preceding six months will be granted common stock with a grant date fair value equal to $5,000. |
| ● | Cash Compensation. Each Outside Director receives an annual retainer of $10,000 in cash for serving on our board of directors, or the Annual Fee. The Annual Fee is paid in quarterly installments to each Outside Director who has served in the relevant capacity for the immediately preceding fiscal quarter no later than 30 days following the end of such preceding fiscal quarter. An Outside Director who has served in the relevant capacity for only a portion of the immediately preceding fiscal quarter will receive a prorated payment of the quarterly payment of the Annual Fee. |
65
ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
The following table sets forth certain information with respect to the beneficial ownership of our common stock as of December 31, 2021, for:
| ● | each of our named executive officers; |
| ● | each of our directors; |
| ● | all of our executive officers and directors as a group; and |
| ● | each person, or group of affiliated persons, who beneficially owned more than 5% of our common stock. |
We have determined beneficial ownership in accordance with the rules of the SEC, and the information is not necessarily indicative of beneficial ownership for any other purpose. Except as indicated by the footnotes below, we believe, based on information furnished to us, that the persons and entities named in the table below have sole voting and sole investment power with respect to all shares of common stock that they beneficially owned, subject to applicable community property laws.
We have based percentage ownership of our common stock on 6,602,498 shares of our common stock outstanding as of December 31, 2021. In computing the number of shares of common stock beneficially owned by a person and the percentage ownership of such person, we deemed to be outstanding all shares of common stock subject to options held by the person that are currently exercisable or exercisable within 60 days of December 31, 2021, as well as all shares of common stock issuable pursuant to restricted stock units held by the person that are subject to vesting conditions expected to occur within 60 days of December 31, 2021. However, we did not deem such shares outstanding for the purpose of computing the percentage ownership of any other person. Unless otherwise indicated, the address of each beneficial owner listed in the table below is c/o Interlink Electronics, Inc., 1 Jenner, Suite 200, Irvine, California 92618.
Common Stock |
| ||||
Beneficially Owned |
| ||||
Name of Beneficial Owner |
| Number |
| Percentage |
|
Named Executive Officers and Directors: |
|
|
|
| |
Steven N. Bronson(1) |
| 5,448,698 |
| 82.5 | % |
Ryan J. Hoffman |
| — |
| — | |
Gene Chen, PhD |
| — |
| — | |
Joy C. Hou(2) |
| 11,535 |
| 0.2 | % |
David J. Wolenski |
| 535 |
| — | |
Maria N. Fregosi |
| 878 |
| — | |
All executive officers and directors as a group (6 persons) |
| 5,461,646 |
| 82.7 | % |
Other 5% Stockholders: |
|
|
|
| |
BKF Asset Holdings, Inc.(3) |
| 993,658 |
| 15.0 | % |
| (1) | Consists of (i) 4,249,040 shares of common stock held by Mr. Bronson individually and jointly with his spouse, (ii) 993,658 shares of common stock held by BKF Asset Holdings, Inc. and (iii) 206,000 shares of common stock held separately by Mr. Bronson’s spouse. |
| (2) | Consists of (i) 6,785 shares of common stock held Ms. Hou jointly with her spouse and (ii) 4,750 shares of common stock held Ms. Hou’s minor child. |
| (3) | BKF Asset Holdings, Inc. is a wholly-owned subsidiary of BKF Capital Group, Inc. Steven N. Bronson, Chairman, Chief Executive Officer and majority stockholder of BKF Capital Group, Inc., has voting and dispositive power with respect to these securities. |
66
Securities Authorized for Issuance under Equity Compensation Plans
The following table summarizes certain information about our equity compensation plans as of December 31, 2021.
Number of | ||||||
Securities | ||||||
Remaining | ||||||
Number of | Available for | |||||
Securities to | Weighted | Future Issuance | ||||
be Issued Upon | Average | Under Equity | ||||
Exercise | Exercise Price | Compensation | ||||
of Outstanding | of Outstanding | Plans (Excluding | ||||
Options, | Options, | Securities | ||||
Warrants and | Warrants and | Reflected in | ||||
Rights | Rights | Column (a)) | ||||
Plan Category |
| (a) |
| (b) |
| (c) |
Equity compensation plans approved by security holders(1) |
| — |
| — |
| 1,538,543 |
Equity compensation plans not approved by security holders |
| — |
| — |
| — |
Total |
| — |
| — |
| 1,538,543 |
| (1) | Consists of our 2016 Omnibus Incentive Plan. |
ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
Certain Relationships and Related Transactions
We describe below transactions, and series of related transactions, since January 1, 2020 to which we were or will be a party, in which:
| ● | the amounts involved exceeded or will exceed $120,000 or 1% of our average total assets at December 31, 2021 and 2020; and |
| ● | any of our directors, executive officers, or beneficial holders of more than 5% of any class of our capital stock, or their immediate family members, had or will have a direct or indirect material interest. |
Other than as described below, there has not been, nor is there any currently proposed, transaction or series of related transactions to which we have been or will be a party other than compensation arrangements for our directors and executive officers, which are described in this Form 10-K under Part III, Item 11, “Executive Compensation.”
Cost Sharing Arrangements
Steven N. Bronson, our Chairman of the Board, President, and Chief Executive Officer, and Ryan J. Hoffman, our Chief Financial Officer, simultaneously serve as officers and, in the case of Mr. Bronson, as a director, of Qualstar Corporation and BKF Capital Group, Inc. Mr. Bronson serves as President and Chief Executive Officer and as a Director of Qualstar and as the Chairman of the Board and Chief Executive Officer of BKF Capital. Mr. Hoffman serves as Chief Financial Officer of each of Qualstar and BKF Capital.
We have entered into the following cost sharing arrangements with Qualstar and BKF Capital:
Irvine, California Facility: We have facilities agreements with both Qualstar and BKF Capital to allow each the use of a portion of the office leased by us in Irvine, California, and we have agreed to split substantially all rent and lease-related costs on an apportioned basis according to the approximate relative usage levels by each entity. For the years ended December 31, 2021 and 2020, we billed Qualstar $54 thousand and $27 thousand, respectively, for Qualstar’s use of our Irvine office facility. For the years ended December 31, 2021 and 2020, we billed BKF Capital $3 thousand and $1 thousand, respectively, for BKF Capital’s use of our Irvine office facility.
67
Camarillo, California Facility: We have a facilities agreement with Qualstar to allow us to use a portion of the office and warehouse facility leased by Qualstar in Camarillo, California, and we have agreed to split substantially all rent and lease related costs on an apportioned basis according to the approximate relative usage levels by each entity. For the years ended December 31, 2021 and 2020, we incurred $72 thousand and $50 thousand, respectively, for our use of Qualstar’s Camarillo facility.
Consulting Agreements: We have entered into various consulting agreements with Qualstar and BKF Capital. Pursuant to the consulting agreements, certain of the parties’ respective employees and independent contractors provide operational, sales, marketing, general and administrative services to the other entity. Interlink provided such consulting services to Qualstar in the amounts of $756 thousand and $507 thousand for the years ended December 31, 2021 and 2020, respectively. Interlink provided such consulting services to BKF Capital in the amounts of $65 thousand and $5 thousand for the years ended December 31, 2021 and 2020, respectively. Qualstar provided such consulting services to Interlink in the amounts of $14 thousand and $29 thousand for the years ended December 31, 2021 and 2020, respectively.
MA Advisory Consulting Agreement: Effective July 2021, we entered into a MA advisory consulting services agreement with Bronson Financial LLC, a wholly owned subsidiary of BKF Capital, in which Bronson Financial LLC provides mergers and acquisitions advisory consulting services to Interlink for $10 thousand per month. For the year ended December 31, 2021, we incurred $60 thousand for services rendered under this agreement.
Expense Reimbursements: Additionally, the parties occasionally pay expenses on behalf of one another, for which each party reimburses the other party correspondingly. We incurred reimbursable expenses on behalf of Qualstar in the amounts of $82 thousand and $110 thousand for the years ended December 31, 2021 and 2020, respectively. We incurred reimbursable expenses on behalf of BKF Capital in the amounts of $13 thousand and $0 thousand for the years ended December 31, 2021 and 2020, respectively. Qualstar incurred reimbursable expenses on behalf of us in the amounts of $16 thousand and $42 thousand for the years ended December 31, 2021 and 2020, respectively.
Indemnification Agreements
We have entered into indemnification agreements with each of our current directors and executive officers. The indemnification agreements and our articles of incorporation and by-laws require us to indemnify our directors and officers to the fullest extent permitted by Nevada law.
Policies and Procedures for Related Party Transactions
Our audit committee has the primary responsibility for reviewing and approving or disapproving “related party transactions,” which are transactions between us and related persons in which the aggregate amount involved exceeds or may be expected to exceed $120,000 or 1% of our average total assets at December 31, 2021 and 2020 and in which a related person has or will have a direct or indirect material interest. Our policy regarding transactions between us and related persons provides that a related person is defined as a director, executive officer, nominee for director or greater than 5% beneficial owner of our common stock, in each case since the beginning of the most recently completed year, and any of their immediate family members. Our audit committee charter provides that our audit committee shall review and approve or disapprove any related party transactions.
Director Independence
Our common stock is listed on the Nasdaq Capital Market. Under the rules of The Nasdaq Stock Market, LLC, or Nasdaq, independent directors must comprise a majority of a listed company’s board of directors. In addition, the Nasdaq rules require that, subject to specified exceptions, each member of a listed company’s audit, compensation and nominating and corporate governance committees be independent. Under the Nasdaq rules, a director will only qualify as an ‘‘independent director’’ if, in the opinion of that company’s board of directors, that person does not have a relationship that would interfere with the exercise of independent judgment in carrying out the responsibilities of a director.
Our board of directors has undertaken a review of the independence of each director and considered whether each director has a material relationship with us that could compromise or interfere with such director’s ability to exercise independent judgment in carrying out his or her responsibilities. As a result of this review, our board of directors has determined that Ms. Fregosi, Ms. Hou, and
68
Mr. Wolenski are “independent directors” as defined under applicable Nasdaq rules and regulations. Because Mr. Bronson is employed by Interlink, he does not qualify as independent.
In addition, our board of directors has established an audit committee, a compensation committee and a nominating and governance committee. Ms. Fregosi, Ms. Hou, and Mr. Wolenski, each of whom is a non-employee member of our board of directors, serve on these board committees. Our board of directors has determined that each of Ms. Fregosi, Ms. Hou, and Mr. Wolenski satisfies the requirements for independence and, in the case of the audit committee, financial literacy for service on the audit committee, compensation committee and nominating and governance committee under applicable Nasdaq rules.
ITEM 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES
Audit Committee Policy on Pre-Approval of Audit and Permissible Non-Audit Services
Consistent with requirements of the SEC and the Public Company Accounting Oversight Board, or PCAOB, regarding auditor independence, our audit committee is responsible for the appointment, compensation and oversight of the work of our independent registered public accounting firm. In recognition of this responsibility, our audit committee has a policy for the pre-approval of all audit and permissible non-audit services provided by the independent registered public accounting firm. These services may include audit services, audit-related services, tax services and other services.
Before the establishment of our audit committee in July 2020, the duties and responsibilities of the audit committee were performed by our full board of directors.
Before engagement of the independent registered public accounting firm for the next fiscal year’s audit, the independent registered public accounting firm submits a detailed description of services expected to be rendered during that year for each of the following categories of services to the audit committee for approval:
| ● | Audit services. Audit services include the annual financial statement audit (including required quarterly reviews) and other procedures required to be performed by the independent auditor to form an opinion on our consolidated financial statements. Audit services also include, as necessary, the attestation engagement for the independent auditor’s report on management’s report on internal controls for financial reporting. Other audit services may include services associated with SEC registration statements, periodic reports and other documents filed with the SEC. |
| ● | Audit-related services. Audit-related services are assurance and related services that are reasonably related to the performance of the audit or review of our financial statements or that are traditionally performed by the independent auditor. |
| ● | Tax Services. Tax services include services related to tax compliance, tax planning and tax advice. |
| ● | All Other Services. All other services are those services not described in the other categories that are not prohibited by SEC rules. |
The audit committee pre-approves particular services or categories of services on a case-by-case basis. During the year, circumstances may arise when it may become necessary to engage the independent registered public accounting firm for additional services not contemplated in the original pre-approval. In those instances, the services must be pre-approved by the audit committee, or as permitted, the audit committee chair, before the independent registered public accounting firm is engaged. Pre-approval fee levels or budgeted amounts for all services to be provided by the independent registered public accounting firm are established annually by the audit committee. Any proposed services exceeding these levels or amounts require specific pre-approval by the audit committee, or the audit committee chair. All fees paid to Macias Gini O’Connell LLP (the Company's current independent registered public accounting firm) and RBSM LLP (the Company's former independent registered public accounting firm) for the fiscal years ended December 31, 2021 and 2020 were pre-approved by the audit committee or, before establishment of our audit committee in July 2020, by the full board of directors in accordance with the process described in the policy above.
69
Fees Paid to Independent Registered Public Accounting Firm
On November 24, 2021, RBSM LLP resigned as the Company’s independent registered public accounting firm, effective on December 15, 2021. On January 19, 2022, the Company engaged Macias Gini O’Connell LLP as our independent registered public accounting firm, and Macias Gini O’Connell LLP conducted the audit of our financial statements for the fiscal year ended December 31, 2021.
The following table presents fees billed to us by Macias Gini O’Connell LLP for professional services rendered during the fiscal year ended December 31, 2021. Macias Gini O’Connell LLP did not provide professional services to us during 2020.
| 2021 | ||
Audit Fees(1) | $ | 130,000 | |
Audit-Related Fees(2) |
| — | |
Tax Fees(3) |
| — | |
All Other Fees(4) |
| — | |
Total Fees | $ | 130,000 | |
(1) “Audit Fees” consist of fees for professional services rendered in connection with the audit of our annual consolidated financial statements, review of our quarterly financial statements presented in our quarterly reports on Form 10-Q, and services that are normally provided by our independent registered public accounting firm in connection with statutory and regulatory filings or engagements for the fiscal year.
(2) “Audit-Related Fees” consist of fees incurred for professional services that are reasonably related to the performance of the audit or review of the company’s financial statements.
(3) “Tax Fees” consist of fees incurred for professional services rendered in connection with tax audits, tax compliance, and tax consulting and planning.
(4) “All Other Fees” relate to professional services not included in the categories above, including services related to other regulatory reporting requirements.
The following table presents fees billed to us by RBSM LLP for professional services for the fiscal years ended December 31, 2021 and 2020.
| 2021 |
| 2020 | |||
Audit Fees(1) | $ | 30,000 | $ | 110,000 | ||
Audit-Related Fees(2) |
| 25,000 |
| 8,500 | ||
Tax Fees(3) |
| — |
| — | ||
All Other Fees(4) |
| — |
| 2,488 | ||
Total Fees | $ | 55,000 | $ | 120,988 | ||
| (1) | “Audit Fees” consist of fees for professional services rendered in connection with the audit of our annual consolidated financial statements, review of our quarterly financial statements presented in our quarterly reports on Form 10-Q, and services that are normally provided by our independent registered public accounting firm in connection with statutory and regulatory filings or engagements for the fiscal year. |
| (2) | “Audit-Related Fees” consist of fees incurred for professional services that are reasonably related to the performance of the audit or review of the company’s financial statements. Audit-related fees for 2021 include fees for professional services rendered in connection with registration of shares pursuant to our registration statements on Form S-3 that we filed with the SEC during 2021. Audit-related fees for 2020 include fees for professional services rendered in connection with the registration of shares pursuant to our registration statement on Form S-8 that we filed with the SEC during 2020. |
| (3) | “Tax Fees” consist of fees incurred for professional services rendered in connection with tax audits, tax compliance, and tax consulting and planning. |
70
| (4) | “All Other Fees” relate to professional services not included in the categories above, including services related to other regulatory reporting requirements. All other fees for 2020 include reimbursement of direct, out-of-pocket expenses. |
PART IV
ITEM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES
We have filed the following documents as part of this Annual Report on Form 10-K:
| 1. | Consolidated Financial Statements |
Our consolidated financial statements are listed in the “Index to Consolidated Financial Statements” under Part II, Item 8 of this Annual Report on Form 10-K.
| 2. | Financial Statement Schedules |
All schedules have been omitted because they are not required, not applicable, not present in amounts sufficient to require submission of the schedule, or the required information is otherwise included in our consolidated financial statements and related notes.
| 3. | Exhibits |
The following exhibits are filed as part of this Annual Report on Form 10-K.
Exhibit |
|
|
| Incorporated by Reference |
| Filed | ||||||
Number |
| Exhibit Description |
| Form |
| File Number |
| Exhibit |
| Filing Date |
| Herewith |
3.1 |
|
| 10 |
| 000-21858 |
| 3.1 |
| February 17, 2016 |
|
| |
3.2 | 8-K | 001-37659 | 3.1 | October 25, 2021 | ||||||||
3.3 |
|
| 10 |
| 000-21858 |
| 3.2 |
| February 17, 2016 |
|
| |
3.4 |
|
| 10 |
| 000-21858 |
| 3.3 |
| February 17, 2016 |
|
| |
4.1 |
|
| 10 |
| 000-21858 |
| 4.1 |
| February 17, 2016 |
|
| |
10.1* |
| Form of Indemnification Agreement between the Registrant and each of its directors and officers |
| 10 |
| 000-21858 |
| 10.1 |
| February 17, 2016 |
|
|
10.2* |
| Employment Agreement, dated July 7, 2016, between the Registrant and Steven N. Bronson |
| 8-K |
| 001-37659 |
| 10.1 |
| July 11, 2016 |
|
|
10.3* |
|
| 8-K |
| 001-37659 |
| 10.1 |
| June 22, 2016 |
|
| |
10.4 |
|
| 10-12G |
| 000-21858 |
| 10.6 |
| August 4, 2020 |
|
| |
10.5* |
| Employment Offer Letter, dated November 4, 2020, between the Registrant and Ryan J. Hoffman |
| 8-K |
| 000-21858 |
| 10.1 |
| November 17, 2020 |
|
|
71
|
|
|
|
|
|
|
|
|
| X | ||
|
|
|
|
|
|
|
|
|
| X | ||
|
|
|
|
|
|
|
|
|
| X | ||
24.1 |
|
|
|
|
|
|
|
|
|
| X | |
|
|
|
|
|
|
|
|
|
| X | ||
|
|
|
|
|
|
|
|
|
| X | ||
|
|
|
|
|
|
|
|
|
| X | ||
101.INS |
| XBRL Instance Document |
|
|
|
|
|
|
|
|
| X |
101.SCH |
| XBRL Taxonomy Extension Schema Document |
|
|
|
|
|
|
|
|
| X |
101.CAL |
| XBRL Taxonomy Extension Calculation Linkbase Document |
|
|
|
|
|
|
|
|
| X |
101.DEF |
| XBRL Taxonomy Extension Definition Linkbase Document |
|
|
|
|
|
|
|
|
| X |
101.LAB |
| XBRL Taxonomy Extension Label Linkbase Document |
|
|
|
|
|
|
|
|
| X |
101.PRE |
| XBRL Taxonomy Extension Presentation Linkbase Document |
|
|
|
|
|
|
|
|
| X |
* Each a management contract or compensatory plan or arrangement required to be filed as an exhibit to this annual report on Form 10-K.
# | The information in this exhibit is furnished and deemed not filed with the Securities and Exchange Commission for purposes of section 18 of the Exchange Act of 1934, as amended, and is not to be incorporated by reference into any filing of Interlink Electronics, Inc. under the Securities Act of 1933, as amended, or the Exchange Act of 1934, as amended, whether made before or after the date hereof, regardless of any general incorporation language in such filing. |
ITEM 16. FORM 10-K SUMMARY
None.
72
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
Dated: March 29, 2022 | Interlink Electronics, Inc. | |
|
| |
| By: | /s/ RYAN J. HOFFMAN |
|
| RYAN J. HOFFMAN |
|
| Chief Financial Officer |
|
| (Principal Financial and Accounting Officer) |
POWER OF ATTORNEY
KNOW ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints Steven N. Bronson and Ryan J. Hoffman, and each of them, as his true and lawful attorneys-in-fact and agents, with full power of substitution for him, and in his name in any and all capacities, to sign any and all amendments to this Annual Report on Form 10-K, and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents, and each of them, full power and authority to do and perform each and every act and thing requisite and necessary to be done therewith, as fully to all intents and purposes as he might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents, and any of them or his or her substitute or substitutes, may lawfully do or cause to be done by virtue hereof.
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.
Signature |
| Title |
| Date |
|
|
|
| |
/s/ Steven N. Bronson |
| Chief Executive Officer, President and Chairman of | March 29, 2022 | |
Steven N. Bronson |
| the Board of Directors |
| |
|
|
|
| |
/s/ Ryan J. Hoffman |
| Chief Financial Officer and Secretary | March 29, 2022 | |
Ryan J. Hoffman |
| (Principal Financial and Accounting Officer) |
| |
|
|
|
| |
/s/ Maria N. Fregosi |
| Director | March 29, 2022 | |
Maria N. Fregosi |
|
|
| |
|
|
|
| |
/s/ Joy C. Hou |
| Director | March 29, 2022 | |
Joy C. Hou |
|
|
| |
|
|
|
| |
/s/ David J. Wolenski |
| Director | March 29, 2022 | |
David J. Wolenski |
|
|
| |
73