TER 10-K Fiscal year ended Dec. 30, 2011

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

ANNUAL REPORT

PURSUANT TO SECTIONS 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

(MARK ONE)

For the fiscal year ended December 31, 2011

OR

Commission file number 001-06462

TERADYNE, INC.

(Exact Name of Registrant as Specified in Its Charter)

Registrant’s telephone number, including area code: (978) 370-2700

Securities registered pursuant to Section 12(b) of the Act:

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes x No ¨

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act.    Yes ¨ No x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes x No ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (232.405 of this chapter) during the proceeding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes x No ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained to the best of the registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or in any amendment to this Form 10-K. x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act (check one):

Large accelerated filer x Accelerated filer ¨ Non-accelerated filer ¨ Smaller reporting company ¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes ¨ No x

The aggregate market value of the voting stock held by non-affiliates of the registrant as of July 1, 2011 was approximately $2.2 billion based upon the closing price of the registrant’s Common Stock on the New York Stock Exchange on that date.

The number of shares outstanding of the registrant’s only class of Common Stock as of February 22, 2012 was 186,457,258 shares.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s proxy statement in connection with its 2012 annual meeting of shareholders are incorporated by reference into Part III.

Table of Contents

TERADYNE, INC.

FORM 10-K

Teradyne, Inc. (the “Company” or “Teradyne”) was founded in 1960 and is a leading global supplier of automatic test equipment.

We design, develop, manufacture and sell automatic test systems and solutions used to test complex electronics in the consumer electronics, automotive, computing, telecommunications, wireless, and aerospace and defense industries. Our automatic test equipment products and services include:

We have a broad customer base which includes integrated device manufacturers (“IDMs”), outsourced semiconductor assembly and test providers (“OSATs”), wafer foundries, fabless companies that design, but contract with others for the manufacture of integrated circuits (“ICs”), developers of wireless devices and consumer electronics, manufacturers of circuit boards, automotive companies, wireless product manufacturers, storage device manufacturers, aerospace and military contractors as well as the United States Department of Defense.

In 2011, we acquired LitePoint Corporation (“LitePoint”) to expand our product portfolio of test equipment in the wireless test sector. LitePoint designs, develops, and supports advanced wireless test solutions for the development and manufacturing of wireless devices, including smart phones, tablets, notebooks/laptops, personal computer peripherals, and other Wi-Fi enabled devices. LitePoint is our Wireless Test segment.

In 2009, we entered the High Speed dynamic random access memory (“DRAM”) testing market with our UltraFlex-M product. High speed DRAM memory devices are used for high-end graphics applications in personal computer and gaming consoles.

In 2009, we also entered the market for hard disk drive test systems with our Neptune product. The Neptune product line currently is used to test 2.5 inch hard disk drives for laptops, notebooks and consumer electronic storage devices.

In 2008, we acquired Nextest Systems Corporation (“Nextest”) and Eagle Test Systems, Inc. (“Eagle Test”) to expand our product portfolio of automatic test equipment for the semiconductor industry. Nextest develops systems to test integrated circuits such as microcontrollers, image sensors, smart cards and field programmable logic devices for the flash memory, flash card and flash memory based system-on-a-chip (“SOC”) markets. Eagle Test develops systems to test analog, mixed-signal and radio frequency semiconductors used in digital cameras, MP3 players, cellular telephones, video/multimedia products, automotive electronics and notebook and desktop computers. Nextest and Eagle Test are included within our Semiconductor Test segment.

Investor Information

We are a Massachusetts corporation incorporated on September 23, 1960. We are subject to the informational requirements of the Securities Exchange Act of 1934 (“Exchange Act”). We file periodic reports, proxy statements and other information with the Securities and Exchange Commission (“SEC”). Such reports,

1

Table of Contents

proxy statements and other information may be obtained by visiting the Public Reference Room of the SEC at 100 F Street, N.E., Washington, DC 20549 or by calling the SEC at 1-800-SEC-0330. In addition, the SEC maintains an internet site (http://www.sec.gov) that contains reports, proxy and information statements and other information regarding issuers that file documents electronically.

You can access financial and other information, including the charters of our Audit Committee, Compensation Committee and Nominating and Corporate Governance Committee, our Corporate Governance Guidelines and Code of Conduct, by clicking the Investors link on our web site at www.teradyne.com. We make available, free of charge, copies of our filings with the SEC, including our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act through our web site as soon as reasonably practicable after filing such material electronically or otherwise furnishing it to the SEC.

Products

Semiconductor Test

We design, manufacture, sell and support Semiconductor Test products and services on a worldwide basis. The test systems we provide are used both for wafer level and device package testing. These chips are used in automotive, communications, consumer, computer and electronic game applications, among others. Semiconductor devices span a broad range of functionality, from very simple low-cost devices such as appliance microcontrollers, operational amplifiers or voltage regulators to complex digital signal processors, microprocessors, high-density as well as high speed memory devices. Semiconductor Test products and services are sold to IDMs that integrate the fabrication of silicon wafers into their business, “Fabless” companies that outsource the manufacturing of silicon wafers, “Foundries” that cater to the processing and manufacturing of silicon wafers, and OSATs that provide test and assembly services for the final packaged devices to both Fabless companies and IDMs. Fabless companies perform the design of integrated circuits without manufacturing capabilities, and use Foundries for wafer manufacturing and OSATs for test and assembly. These customers obtain the overall benefit of comprehensively testing devices and reducing the total costs associated with testing by using our Semiconductor Test systems to:

Our FLEX Test Platform architecture advances our core technologies to produce test equipment that is designed for high efficiency multi-site testing. Multi-site testing involves the simultaneous testing of many devices and functions in parallel. Leading semiconductor manufacturers are using multi-site testing to significantly improve their “Cost of Test” economics. The FLEX Test Platform architecture addresses customer requirements through the following key capabilities:

1) A high efficiency multi-site architecture that eliminates tester overhead such as instrument setup, synchronization and data movement, and signal processing;

2) The IG-XL™ software operating system which provides fast program development, including instant conversion from single to multi-site test; and

3) Broad technology coverage by instruments designed to cover the range of test parameters, coupled with a Universal Slot test head design that allows easy test system reconfiguration to address changing test needs.

FLEX Test Platform purchases are being made by IDMs, OSATs, Foundries and Fabless customers. The FLEX Test Platform has become a widely used test solution at OSATs and test houses by providing versatile testers that can handle the widest range of devices, allowing OSATs to leverage their capital investments. The

2

Table of Contents

broad consumer, automotive and broadband markets have historically driven most of the device volume growth in the semiconductor industry. These markets include smart phones, cell phones, set top boxes, HDTVs, game controllers, computer graphics, and automotive controllers to name a few. These end use markets continue to be drivers for the FLEX Test Platform family of products because they require a wide range of technologies and instrument coverage. The FLEX Test Platform has an installed base of more than 3,000 customer systems to date and it continues to grow. The introduction of the UltraFLEX-M tester in 2009 extends the FLEX Test Platform into the High Speed DRAM testing market.

Our J750™ test system shares the IG-XL software environment with the family of FLEX Test Platform systems. The J750 is designed to address the highest volume semiconductor devices such as microcontrollers that are central to the functionality of almost every consumer electronics product, from small appliances to automotive engine controllers. J750 test systems combine compact packaging, high throughput and ease of production test. We extended the J750 platform technology to create the IP750 Image Sensor™ test system. The IP750 is focused on testing image sensor devices used in digital cameras and other imaging products. We continue to invest in the J750 platform with new instrument releases that bring new capabilities to existing market segments and expand the J750 platform to critical new devices that include high end microcontrollers and the latest generation of cameras. The J750 platform has an installed base of over 3,700 systems and it continues to grow.

Our acquisition of Nextest in January of 2008 expanded our product offerings to include the Magnum test platform. The Magnum products address the requirements of mass production test of memory devices such as flash memory and DRAM. Flash and DRAM memory are widely used core building blocks in modern electronic products finding wide application in consumer, industrial, and computing equipment. Magnum II is the newest member of the family. With test rates up to 800 megabits per second and a versatile architecture designed for maximal throughput, Magnum II tests flash and DRAM devices, an important advantage for large memory producers that manufacture both types of memory. The Magnum platform has an installed base of over 1,200 systems and it continues to grow.

Our acquisition of Eagle Test in November of 2008 expanded our product offerings to include the ETS platform. The ETS platform is used by semiconductor manufacturers and assembly and test subcontractors, primarily in the low pin count analog/mixed signal discrete markets that cover more cost sensitive applications. Eagle Test’s proprietary SmartPin™ technology enables multiple semiconductor devices to be tested simultaneously, or in parallel, on an individual test system, permitting greater test throughput. Semiconductors tested by Eagle Test’s systems are incorporated into a wide range of products in historically high-growth markets, including digital cameras, MP3 players, cell phones, video/multimedia products, automotive electronics, computer peripherals, and notebook and desktop computers. The ETS platform has an installed base of over 2,300 systems and it continues to grow.

Systems Test Group

Our Systems Test Group segment is comprised of three business units: Mil/Aero, Storage Test and Commercial Board Test.

Mil/Aero

Our expertise in the test and diagnosis of printed circuit boards (“PCB”) and subsystems has proven to be essential in supporting the ever-demanding military, defense and aerospace markets. Our test solutions for these markets include high-performance systems, instruments and software solutions that manufacturers and repair depots depend on to ensure the readiness of military and commercial electronic systems.

New programs from tactical aircraft to missile systems, as well as widespread enhancement programs, continue to fuel the demand for high performance test systems. We are a leading provider of test instrumentation and systems with performance well suited to the demands of military/aerospace electronics manufacturers and

3

Table of Contents

repair depots worldwide. Success in this market is illustrated by our penetration into major Department of Defense programs across all U.S. military service branches and many allied military services worldwide.

Storage Test

Leveraging our expertise in functional test and semiconductor test, we introduced the Neptune product line in 2009. This product is targeted at the high growth 2.5 inch hard disk drive market. In 2010, we expanded our Neptune product line to address the enterprise drive market.

The storage growth for laptops, netbooks and consumer electronics combined with the growth in storage density is driving the need for high density test solutions for the 2.5 inch HDD segment. The Neptune product line addresses the challenges of high throughput automated manufacturing environments while at the same time meeting the performance requirements for next generation HDDs. Our products are targeted at the HDD manufacturers and used as part of the manufacturing and test process of drives.

Commercial Board Test

Our test and inspection systems are sold to the electronics manufacturers of cell phones, servers, computers, Internet switches, automobiles and military avionics systems worldwide.

We manufacture in-circuit test (“ICT”) systems that are used to assess electrical interconnections, verify interoperation and find faulty circuits on fully assembled and soldered PCBs. Fast, accurate and cost-effective diagnostic capabilities are hallmark features of our ICT systems, including the TestStation™ and Spectrum™ product families used in a variety of in-line, high-volume PCB test applications. Supporting technologies such as our patented SafeTest™ technology allow TestStation users to safely troubleshoot the low-voltage components and interconnects commonly found in battery-powered portable consumer electronics and low-power commercial equipment. In addition to standard ICT equipment, we offer combinational test platforms and handler-ready in-line test systems for high-volume board manufacturing.

Wireless Test

Our acquisition of LitePoint in October of 2011 expanded our product offerings in the wireless test industry. LitePoint designs, develops, and supports advanced wireless test solutions for the development and manufacturing of wireless devices, including smart phones, tablets, notebooks/laptops, personal computer peripherals, and other Wi-Fi enabled devices. LitePoint collaborates with developers, component manufacturers, and industry leaders to create agile systems capable of analyzing the entire wireless landscape. Using easy-to-deploy, innovative test methodologies running on software-controlled module design, LitePoint’s IQ product line is designed for high-volume, low-cost product test. LitePoint’s products fall into two categories: cellular and connectivity.

Cellular

The LitePoint IQxstream™ is a multi-DUT cellular communication solution for verification and calibration of 2G/3G/4G mobile devices including smart phones, tablets and data cards. The IQxstream’s non-signaling technology delivers test speeds which allow for superior test coverage and increased throughput over traditional cellular test methods, thus avoiding economic vs. test quality tradeoffs common with slower, traditional approaches.

Connectivity

LitePoint offers a suite of products for connectivity testing. The LitePoint IQ2010™ is a comprehensive one-box solution for multi-com connectivity needs including WiFi, Bluetooth, GPS, FM, WiMax and ZigBee. When combined with the IQxstream, the IQ2010 creates a system for testing smart phones, tablets, and other multi-radio™ devices that include cellular technology. The LitePoint IQflex ^® is a testing solution focused on

4

Table of Contents

wireless LAN and Bluetooth manufacturing test. LitePoint IQnxnPlus™ and IQnxn ^® are testing solutions for complex WiFi and WiMAX devices that utilize multiple input and multiple output RF configurations commonly called MIMO, used in R&D environments. The LitePoint IQview ^® helps simplify WiFi and Bluetooth device development. The IQview offers compatibility with the IQflex manufacturing solution enabling test software developed on the IQview to run on the IQflex platform deployed in manufacturing environments.

LitePoint IQfact™ and IQfactPlus™ are turnkey, chipset specific, solutions enabling rapid volume manufacturing with a minimum of engineering effort. IQfact solutions can be customized for a specific end product and then deployed on LitePoint test equipment.

Discontinued Operations

On March 21, 2011, our Diagnostic Solutions business unit was sold to SPX Corporation. This business provided electronic test and diagnostic systems to the automotive OEMs and their major subcontractors. This business unit was in our Systems Test Group segment.

On August 1, 2007, our Broadband Test Division business was sold to Tollgrade Communications, Inc. This business provided test systems for testing lines and qualifying lines for DSL telephone networks. This business unit was in our Other Test Systems segment.

Diagnostic Solutions and Broadband Test Division have been reflected as discontinued operations in the accompanying financial statements.

Summary of Net Revenue by Reportable Segment

Our three reportable segments accounted for the following percentages of consolidated net revenue for each of last three years:

Sales and Distribution

In fiscal years 2011 and 2010, no single customer accounted for more than 10% of our consolidated net revenue. In 2009, revenues from Western Digital Corporation accounted for more than 10% of our consolidated net revenue. Western Digital Corporation is a customer of our Systems Test Group segment. In each of the years 2011, 2010 and 2009, our three largest customers in aggregate accounted for 19%, 21% and 27% of our consolidated net revenue, respectively.

Direct sales to United States government agencies accounted for 2%, 1% and 4% of our consolidated net revenue in 2011, 2010 and 2009, respectively. Approximately 8%, 8% and 14% of Systems Test Group’s revenue in 2011, 2010 and 2009, respectively, was to United States government agencies and 17%, 35% and 21% of Systems Test Group’s revenue in 2011, 2010 and 2009, respectively, was to government contractor customers.

We have sales and service offices located throughout North America, Asia and Europe, as our customers outside the United States are located primarily in these geographic areas. We sell in these areas predominantly through a direct sales force. Our manufacturing activities are primarily conducted through subcontractors and outsourced contract manufacturers with a significant operation concentrated in China.

5

Table of Contents

Sales to customers outside the United States accounted for 84%, 85% and 75% of our consolidated net revenue in 2011, 2010 and 2009, respectively. Sales to customers located in China were 13%, 9% and 5% of consolidated net revenue in 2011, 2010 and 2009, respectively. Sales to customers located in Taiwan were 12%, 18% and 14% of consolidated net revenue in 2011, 2010 and 2009, respectively. Sales to customers located in Japan were 10%, 5% and 6% of our consolidated net revenue in 2011, 2010 and 2009, respectively. Sales to customers located in Malaysia were 10%, 13% and 12% of our consolidated net revenues in 2011, 2010 and 2009, respectively. Sales to customers located in Korea were 10%, 8% and 5% of our consolidated net revenues in 2011, 2010 and 2009, respectively. Sales are attributed to geographic areas based on the location of the customer site.

See also “Item 1A: Risk Factors” and Note Q: “Operating Segment, Geographic and Significant Customer Information” in Notes to Consolidated Financial Statements.

Competition

We face significant competition throughout the world in each of our reportable segments. Competitors in the Semiconductor Test segment include, among others, Advantest Corporation (“Advantest”) and LTX–Credence Corporation (“LTX”). The merger between Advantest and Verigy may result in a combined company that may be a stronger competitor in certain markets. Competitors in the Systems Test Group include, among others, Agilent Technologies, Inc. and Xyratex Ltd. Competitors in our Wireless Test segment include Agilent, Aeroflex, Inc., Anritsu Company and Rohde & Schwarz GmbH & Co. KG, among others.

Some of our competitors have substantially greater financial and other resources to pursue engineering, manufacturing, marketing and distribution of their products. We also face competition from emerging Asian equipment companies and from internal suppliers at several of our customers. Some of our competitors have introduced or announced new products with certain performance characteristics which may be considered equal or superior to those we currently offer. We expect our competitors to continue to improve the performance of their current products and to introduce new products or new technologies that provide improved cost of ownership and performance characteristics. See also “Item 1A: Risk Factors.”

Backlog

At December 31, 2011 and 2010, our backlog of unfilled orders in our three reportable segments was as follows:

Of the backlog at December 31, 2011, approximately 99% of the Semiconductor Test backlog, 91% of Systems Test Group backlog, and 100% of Wireless Test backlog, is expected to be delivered in 2012.

Customers may delay delivery of products or cancel orders suddenly and without significant notice, subject to possible cancellation penalties. Due to possible customer changes in delivery schedules and cancellation of orders, our backlog at any particular date is not necessarily indicative of the actual sales for any succeeding period. Delays in delivery schedules and/or cancellations of backlog during any particular period could have a material adverse effect on our business, financial condition and results of operations.

Raw Materials

Our products contain electronic and mechanical components that are provided by a wide range of suppliers. Certain of these components are standard products, while others are manufactured to our specifications. We can

6

Table of Contents

experience occasional delays in obtaining timely delivery of certain items. While the majority of our components are available from multiple suppliers, certain items are obtained from sole sources. We may experience a temporary adverse impact if any of our sole source suppliers delays or ceases to deliver products.

Intellectual Property and Licenses

The development of our products, both hardware and software, is based in significant part on proprietary information, our brands and technology. We protect our rights in proprietary information, brands and technology through various methods, such as:

However, these protections might not be effective in all circumstances. Competitors might independently develop similar technology or exploit our proprietary information and our brands in countries where we lack enforceable intellectual property rights or where enforcement of such rights through the legal system provides an insufficient deterrent. Also, intellectual property protections can lapse or be invalidated through appropriate legal processes. We do not believe that any single piece of intellectual property or proprietary rights is essential to our business.

Employees

As of December 31, 2011, we employed approximately 3,200 people. Since the inception of our business, we have experienced no work stoppages or other labor disturbances. We have no collective bargaining contracts.

Engineering and Development Activities

The highly technical nature of our products requires a large and continuing engineering and development effort. Engineering and development expenditures for the years ended December 31, 2011, 2010 and 2009 were $195.6 million, $193.0 million, and $161.3 million, respectively. These expenditures amounted to approximately 14%, 12%, and 21% of consolidated net revenue in 2011, 2010, and 2009, respectively.

Environmental Affairs

We are subject to various federal, state, and local government laws and regulations relating to the protection of employee health and safety and the environment. We accrue for all known environmental liabilities when it becomes probable that we will incur cleanup costs and those costs can reasonably be estimated. The amounts accrued do not cover sites that are in the preliminary stages of investigation. Estimated environmental costs are not expected to materially affect the financial position or results of our operations in future periods. However, estimates of future costs are subject to change due to protracted cleanup periods and changing environmental remediation laws and regulations.

7

Table of Contents

OUR EXECUTIVE OFFICERS

Pursuant to General Instruction G(3) of Form 10-K, the following table is included in Part I of this Annual Report on Form 10-K in lieu of being included in the Proxy Statement for the Annual Meeting of Shareholders. The table sets forth the names of all of our executive officers and certain other information relating to their positions held with Teradyne and other business experience. Our executive officers do not have a specific term of office but rather serve at the discretion of the Board of Directors.

Risks Associated with Our Business

The risks described below are not the only risks that we face. Additional risks and uncertainties not currently known to us or that we currently deem to be immaterial also may materially adversely affect our business, financial condition and/or operating results.

Our business is impacted by worldwide economic cycles, which are difficult to predict.

Capital equipment providers in the electronics and semiconductor industries, such as Teradyne, have, in the past, been negatively impacted by sudden slowdowns in the global economies, and resulting reductions in customer capital investments. The duration of slowdowns in customer capital investments are difficult to predict.

The global economy and financial markets experienced disruption in 2009 and 2008, including, among other things, extreme volatility in security prices, severely diminished liquidity and credit availability, rating downgrades of certain investments and declining valuations of others. We are unable to predict the likely duration and severity of disruptions in financial markets, credit availability, and adverse economic conditions throughout the world. These economic developments affect businesses such as ours and those of our customers and vendors in a number of ways that could result in unfavorable consequences to us. Disruption and deterioration in economic conditions may reduce customer purchases of our products, thereby reducing our revenues and earnings. In addition, such adverse decline in economic conditions may, among other things, result in increased price competition for our products, increased risk of excess and obsolete inventories, increased risk in the collectability of our accounts receivable from our customers, increased risk in potential reserves for doubtful accounts and write-offs of accounts receivable, and higher operating costs as a percentage of revenues.

8

Table of Contents

We have taken actions to address the effects of the economic crisis, including implementing cost control and reduction measures. If our business has another downturn, we may need to take further cost control and reduction measures.

Our business is dependent on the current and anticipated market for electronics, which historically has been highly cyclical.

Our business and results of operations depend in significant part upon capital expenditures of manufacturers of semiconductors and other electronics, which in turn depend upon the current and anticipated market demand for those products. As evidenced by our 2009 and 2008 business and results of operations, the market demand for electronics is impacted by economic slowdowns. Historically, the electronics and semiconductor industry has been highly cyclical with recurring periods of over-supply, which often have had a severe negative effect on demand for test equipment, including systems we manufacture and market. We believe that the markets for newer generations of electronic products such as those that we manufacture and market will also be subject to similar fluctuations. We are dependent on the timing of orders from our customers, and the deferral or cancellation of previous customer orders could have an adverse effect on our results of operations. We cannot ensure that the level of revenues or new orders for a fiscal quarter will be sustained in subsequent quarters. In addition, any factor adversely affecting the electronics industry or particular segments within the electronics industry may adversely affect our business, financial condition and operating results.

We are subject to intense competition.

We face significant competition throughout the world in each of our reportable segments. Some of our competitors have substantial financial and other resources to pursue engineering, manufacturing, marketing and distribution of their products. We also face competition from emerging Asian equipment companies and internal development at several of our customers. Some of our competitors have introduced or announced new products with certain performance characteristics which may be considered equal or superior to those we currently offer. We expect our competitors to continue to improve the performance of their current products and to introduce new products or new technologies that provide improved cost of ownership and performance characteristics. New product introductions by competitors could cause a decline in revenues or loss of market acceptance of our products.

Our operating results are likely to fluctuate significantly.

Our operating results are affected by a wide variety of factors that could materially adversely affect revenues and profitability. The following factors are expected to impact future operations:

9

Table of Contents

As a result of the foregoing and other factors, we have experienced and may continue to experience material fluctuations in future operating results on a quarterly or annual basis which could materially and adversely affect our business, financial condition, operating results and stock price.

We are subject to risks of operating internationally.

A significant portion of our total revenue is derived from customers outside the United States. Our international sales and operations are subject to significant risks and difficulties, including:

In addition, an increasing portion of our products and the products we purchase from our suppliers are sourced or manufactured in foreign locations, including China, and a large portion of the devices our products test are fabricated and tested by foundries and subcontractors in Taiwan, Singapore, China and other parts of Asia. As a result, we are subject to a number of economic and other risks, particularly during times of political or financial instability in these regions. Disruption of manufacturing or supply sources in these international locations could materially adversely impact our ability to fill customer orders and potentially result in lost business.

If we fail to develop new technologies to adapt to our customers’ needs and if our customers fail to accept our new products, our revenues will be adversely affected.

We believe that our technological position depends primarily on the technical competence and creative ability of our engineers. In a rapidly evolving market, such as ours, the development or acquisition of new technologies, commercialization of those technologies into products and market acceptance and customer demand for those products are critical to our success. Successful product development or acquisition, introduction and acceptance depend upon a number of factors, including:

10

Table of Contents

If our suppliers do not meet product or delivery requirements, we could have reduced revenues and earnings.

Certain components, including semiconductor chips, may be in short supply from time to time because of high industry demand or the inability of some vendors to consistently meet our quality or delivery requirements. Approximately 30% of material purchases require some custom work where having multiple suppliers would be cost prohibitive. If any of our suppliers were to cancel contracts or commitments or fail to meet the quality or delivery requirements needed to satisfy customer orders for our products, we could lose time-sensitive customer orders and have significantly decreased revenues and earnings, which would have a material adverse effect on our business, results of operations and financial condition. In addition, we rely on contract manufacturers for certain subsystems used in our products, and our ability to meet customer orders for those products depends upon the timeliness and quality of the work performed by these subcontractors, over whom we do not exercise any control.

To a certain extent, we are dependent upon the ability of our suppliers and contractors to help meet increased product or delivery requirements. It may be difficult for certain suppliers to meet delivery requirements in a period of rapid growth, therefore impacting our ability to meet our customers’ demands.

We rely on the financial strength of our suppliers. There can be no assurance that the loss of suppliers either as a result of financial viability, bankruptcy or otherwise will not have a material adverse effect on our business, results of operations or financial condition.

Our operations may be adversely impacted if our outsourced contract manufacturers or service providers fail to perform .

We depend on Flextronics International Ltd. (“Flextronics”) to manufacture and test our FLEX and J750 family of products from its facility in China and on other contract manufacturers to manufacture other products. If for any reason these contract manufacturers cannot provide us with these products in a timely fashion, or at all, we may not be able to sell these products to our customers until we enter a similar arrangement with an alternative contract manufacturer. If we experience a problem with our supply of products from Flextronics or our other contract manufacturers, it may take us significant time to either manufacture the product or find an alternate contract manufacturer, which could result in substantial expense and disruption to our business.

We have also outsourced a number of our general and administrative functions, including information technology, to reputable service providers, many of which are in foreign countries, sometimes impacting communication with them because of language and time difficulties. Their presence in foreign countries also increases the risk they could be exposed to political risk. Additionally, there may be difficulties encountered in coordinating the outsourced operations with existing functions and operations. If we fail in successfully coordinating and managing the outsourced service providers, it may cause an adverse effect on our operations which could result in a decline in our stock price.

We may not fully realize the benefits of our acquisitions or strategic alliances.

In October 2011, we acquired LitePoint Corporation (“LitePoint”). We may not be able to realize the benefit of acquiring LitePoint or successfully grow LitePoint’s business. We may continue to acquire additional businesses, form strategic alliances or create joint ventures with third parties that we believe will complement or augment our existing businesses. We may not be able to realize the expected synergies and cost savings from the integration with our existing operations of other businesses or technologies that we may acquire. In addition, the

11

Table of Contents

integration process for our acquisitions may be complex, costly and time consuming and include unanticipated issues, expenses and liabilities. We may have difficulty in developing, manufacturing and marketing the products of a newly acquired company in a manner that enhances the performance of our combined businesses or product lines and allows us to realize value from expected synergies. Following an acquisition, we may not achieve the revenue or net income levels that justify the acquisition. Acquisitions may also result in one-time charges (such as acquisition-related expenses, write-offs or restructuring charges) or in the future, impairment of goodwill, that adversely affect our operating results. Additionally, we may fund acquisitions of new businesses, strategic alliances or joint ventures by utilizing our cash, raising debt, issuing shares of our common stock, or by other means.

On April 6, 2009, we completed a registered underwritten offering of $190.0 million aggregate principal amount of 4.50% Convertible Senior Notes (the “Notes”) due March 15, 2014 and received net proceeds of approximately $163.0 million. We used approximately $123.3 million of the net proceeds of this offering to repay all amounts outstanding under our revolving credit facility. Although we are no longer subject to the restrictive covenants under the revolving credit facility, we have incurred approximately $190.0 million principal amount of new indebtedness that the holders of the Notes may require us to repurchase upon the occurrence of certain fundamental changes involving the Company. In addition, on March 31, 2009, our wholly-owned subsidiary in Japan, Teradyne K.K., incurred approximately $10.0 million in indebtedness that we guaranteed. The level of our indebtedness, among other things, could:

Our convertible note hedge and warrant transactions could impact the value of our stock.

Concurrent with the offering of the Notes, we entered into a convertible note hedge transaction with Goldman, Sachs & Co. (the “hedge counterparty”) with a strike price equal to the initial conversion price of the Notes. The convertible note hedges cover, subject to customary antidilution adjustments, approximately 34,703,196 shares of our common stock.

Separately and concurrent with the pricing of the Notes, we entered into a warrant transaction with the hedge counterparty with a strike price of $7.67 per share, which was 75% higher than the closing price of our common stock on March 31, 2009. The warrants will be net share settled and cover, subject to customary antidilution adjustments, approximately 31,963,470 shares of our common stock. On April 1, 2009, the hedge counterparty exercised its option to purchase warrants covering, subject to customary antidilution adjustments, an additional 2,739,726 shares of our common stock. However, we will not be obligated to deliver to the hedge counterparty more than 34,526,500 shares of common stock upon exercise of the warrants (which amount represented less than 19.99% of our outstanding shares of common stock as of March 31, 2009, without giving effect to any shares of common stock issuable pursuant to the warrant transaction), subject to customary antidilution adjustments.

The convertible note hedges are expected to reduce the potential dilution to our common stock upon any conversion of the Notes. However, the warrant transaction could separately have a dilutive effect to the extent

12

Table of Contents

that the market value per share of our common stock exceeds the applicable strike price of the warrant. The net cost of the convertible note hedge transaction to us, after being partially offset by the proceeds from the sale of the warrants, was approximately $21.7 million.

In connection with establishing its initial hedge of these convertible note hedge and warrant transactions, the hedge counterparty has entered into various derivative transactions with respect to our common stock and/or purchased shares of our common stock or other securities, including the Notes, concurrent with, or shortly after, the pricing of the Notes. In addition, the hedge counterparty may modify its hedge positions by entering into or unwinding various derivative transactions with respect to our common stock or by selling our common stock or other securities, including the Notes, in secondary market transactions (and may do so during any observation period related to the conversion of the Notes). These activities could adversely impact the value of our common stock and the Notes.

We have taken measures to significantly lower our fixed costs, which could have long-term negative effects on our business or impact our ability to adequately address a rapid increase in customer demand.

We have taken measures to address slowdowns in the market for our products. These measures include shifting more of our operations to lower cost regions, outsourcing manufacturing processes, divesting of certain businesses, implementing material cost reduction programs, reducing the number of our employees, and reducing planned capital expenditures and expense budgets. We cannot ensure that the measures we have taken will not impair our ability to effectively develop and market products, to remain competitive in the industries in which we compete, to operate effectively, to operate profitably during slowdowns or to effectively meet a rapid increase in customer demand. These measures may have long-term negative effects on our business by reducing our pool of technical talent, decreasing or slowing improvements in our products, making it more difficult to hire and retain talented individuals and to quickly respond to customers or competitors in an upward cycle.

We may incur significant liabilities if we fail to comply with environmental regulations.

We are subject to both domestic and international environmental regulations and statutory strict liability relating to the use, storage, discharge, site cleanup and disposal of hazardous chemicals used in our manufacturing processes. If we fail to comply with present and future regulations, or are required to perform site remediation, we could be subject to future liabilities or cost, including penalties or the suspension of production. Present and future regulations may also:

Pursuant to present regulations and agreements, we are conducting groundwater and subsurface assessment and monitoring and are implementing remediation and corrective action plans for facilities located in California, Massachusetts and New Hampshire which are no longer conducting manufacturing operations. As of December 31, 2011, we have not incurred material costs as result of the monitoring and remediation steps taken at the California, Massachusetts and New Hampshire sites.

On January 27, 2003, the European Union adopted the following directives: (i) the directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (the “RoHS Directive”); and (ii) the directive on Waste Electrical and Electronic Equipment (the “WEEE Directive”). The WEEE Directive became effective August 13, 2005 and the RoHS Directive became effective on July 6, 2006. Both the RoHS Directive and the WEEE Directive alter the form and manner in which electronic equipment is

13

Table of Contents

imported, sold and handled in the European Union. Other jurisdictions, such as China, have followed the European Union’s lead in enacting legislation with respect to hazardous substances and waste removal. Ensuring compliance with the RoHS Directive, the WEEE Directive and similar legislation in other jurisdictions, and integrating compliance activities with our suppliers and customers could result in additional costs and disruption to operations and logistics and thus, could have a negative impact on our business, operations and financial condition.

We currently are and in the future may be subject to litigation that could have an adverse effect on our business.

From time to time, we may be subject to litigation or other administrative and governmental proceedings that could require significant management time and resources and cause us to incur expenses and, in the event of an adverse decision, pay damages in an amount that could have a material adverse effect on our financial position or results of operations.

Third parties may claim we are infringing their intellectual property and we could suffer significant litigation costs, licensing expenses or be prevented from selling our products.

We have been sued for patent infringement in the past and receive notifications from time to time that we may be in violation of patents held by others. An assertion of patent infringement against us, if successful, could have a material adverse effect on our ability to sell our product or it could force us to seek a license to the intellectual property rights of others or alter such products so that they no longer infringe the intellectual property rights of others. A license could be very expensive to obtain or may not be available at all. Similarly, changing our products or processes to avoid infringing the rights of others may be costly or impractical. Additionally, patent litigation could require a significant use of management resources and involve a lengthy and expensive defense, even if we eventually prevail. If we do not prevail, we might be forced to pay significant damages, obtain licenses, modify our products, or stop making our products; each of which could have a material adverse effect on our financial condition and operating results.

We may incur higher tax rates than we expect and may have exposure to additional international tax liabilities and costs.

We are subject to paying income taxes in the United States and various other countries where we operate. Our effective tax rate is dependent on where our earnings are generated and the tax regulations and the interpretation and judgment of administrative tax or revenue entities in the United States and other countries. We have pursued a global tax strategy which could adversely be affected by our failure to expand operations or earnings in certain countries, the mix of earnings and tax rates in the countries where we operate, changes to tax laws or an adverse tax ruling by administrative entities. We are also subject to tax audits in the countries where we operate. Any material assessment resulting from an audit from an administrative tax or revenue entity could also negatively affect our financial results.

As a multinational corporation, we are subject to income taxes as well as non-income based taxes, in both the United States and various foreign jurisdictions. In certain foreign jurisdictions, we qualify for tax incentives based on our ability to meet, on a continuing basis, various tests relating to our employment levels, research and development expenditures and other qualification requirements in a particular foreign jurisdiction. While we intend to operate in such a manner to maintain and maximize our tax incentives, no assurance can be given that we have so qualified or that we will so qualify for any particular year or jurisdiction. If we fail to qualify and to remain qualified for certain foreign tax incentives, we may be subject to further taxation or an increase in our effective tax rate which would adversely impact our financial results. In addition, we may incur additional costs, including headcount expenses, in order to obtain or maintain a foreign tax incentive in a particular foreign jurisdiction.

14

Table of Contents

We have significant guarantees and indemnification obligations.

From time to time, we make guarantees to customers regarding the performance of our products and guarantee certain indebtedness, performance obligations or lease commitments of our subsidiary and affiliate companies. We also have agreed to provide indemnification to our officers, directors, employees and agents, to the extent permitted by law, arising from certain events or occurrences while the officer, director, employee or agent, is or was serving at our request in such capacity. If we become liable under any of these obligations, it could materially and adversely affect our business, financial condition and operating results. For additional information see Note J: “Commitments and Contingencies—Guarantees and Indemnification Obligations” in Notes to Consolidated Financial Statements.

If we are unable to protect our intellectual property (“IP”), we may lose a valuable asset or may incur costly litigation to protect our rights.

We protect the technology that is incorporated in our products in several ways, including through patent, copyright, and trade secret protection and by contractual agreement. However, even with these protections, our IP may still be challenged, invalidated or subject to other infringement actions. While we believe that our IP has value in the aggregate, no single element of our IP is in itself essential. If a significant portion of our IP is invalidated or ineffective, our business could be materially adversely affected.

Our business may suffer if we are unable to attract and retain key employees.

Competition for employees with skills we require is intense in the high technology industry. Our success will depend on our ability to attract and retain key technical employees. The loss of one or more key or other employees, a decrease in our ability to attract additional qualified employees, or the delay in hiring key personnel could each have a material adverse effect on our business, results of operations or financial condition.

We may have additional pension funding obligations as a result of the weak performance of financial markets and its effect on plan assets.

Our future funding obligations for our U.S. defined benefit pension plan qualified with the Internal Revenue Service (“IRS”) depend upon the future performance of assets for this plan, the level of interest rates used to determine funding levels, the level of benefits provided for by the plan and any changes in government laws and regulations. Our U.S. qualified defined benefit pension plan currently holds a significant amount of fixed income securities. As of December 31, 2011, our U.S. qualified defined benefit pension plan had a funded status of approximately 102%. Due to significant declines in financial markets and deterioration in the value of our plan assets in 2008, we made additional discretionary contributions to our U.S. qualified defined benefit pension plan in 2009 and 2010 and may have to make additional contributions in future reporting periods, which may negatively affect our cash flow.

The natural disasters in Japan and the Philippines could disrupt our operations and those of our customers and adversely affect our results of operations.

The recent events in Japan and the Philippines, including earthquakes, tsunamis, flooding and the related damage, created economic uncertainty in those countries. Based on a review of our global supply chain and the customers’ test facilities we serve in Japan and the Philippines, we do not expect a significant impact on our ability to manufacture and sell our products, however, there can be no assurance that an adverse effect on our business, financial condition and operating results will not result from these events.

15

Table of Contents

Our operations and the operations of our customers and suppliers are subject to risks of natural catastrophic events, widespread health epidemics, acts of war, terrorist attacks and the threat of domestic and international terrorist attacks, any one of which could result in cancellation of orders, delays in deliveries or other business activities, or loss of customers and could negatively affect our business and results of operations.

Our business is international in nature, with our sales, service and administrative personnel and our customers and suppliers located in numerous countries throughout the world. Our operations and those of our customers and suppliers are subject to disruption for a variety of reasons, including work stoppages, acts of war, terrorism, health epidemics, fires, earthquakes, hurricanes, volcanic eruptions, energy shortages, telecommunication failures, tsunamis, flooding or other natural disasters. Such disruption could materially increase our costs and expenses as well as cause delays in, among other things, shipments of products to our customers, our ability to perform services requested by our customers, or the installation and acceptance of our products at customer sites. Any of these conditions could have a material adverse effect on our business, financial conditions and results of operations.

Provisions of our charter and by-laws and Massachusetts law make a takeover of Teradyne more difficult.

There are provisions in our basic corporate documents and under Massachusetts law that could discourage, delay or prevent a change in control, even if a change in control may be regarded as beneficial to some or all of our stockholders.

None.

16

Table of Contents

The following table provides certain information as to our principal general offices and manufacturing facilities.

We are subject to legal proceedings, claims and investigations that arise in the ordinary course of business such as, but not limited to, patent, employment, commercial and environmental matters. We believe that we have meritorious defenses against all pending claims and intend to vigorously contest them. While it is not possible to predict or determine the outcomes of any pending claims or to provide possible ranges of losses that may arise, we believe the potential losses associated with all of these actions are unlikely to have a material adverse effect on our business, financial position or results of operations.

17

Table of Contents

The following table shows the market range for our common stock based on reported sales price on the New York Stock Exchange.

The number of record holders of our common stock at February 22, 2012 was 2,478.

We have never paid cash dividends because it has been our policy to use earnings to finance expansion and growth. Payment of future cash dividends will rest within the discretion of our Board of Directors and will depend, among other things, upon our earnings, capital requirements, and financial condition.

See “Item 7: Management’s Discussion and Analysis of Financial Condition and Results of Operations—Equity Compensation Plans,” for information on our equity compensation plans and our performance graph.

In November 2007, Teradyne’s Board of Directors (the “Board”) authorized a $400 million stock repurchase program. This stock repurchase program was suspended by the Board on November 4, 2008. The cumulative repurchases as of December 31, 2008, totaled 8.5 million shares of common stock for $102.6 million at an average price of $12.14 per share.

In November 2010, the Board cancelled the November 2007 stock repurchase program and authorized a new stock repurchase program for up to $200 million. The cumulative repurchases as of December 31, 2011 totaled 2.6 million shares of common stock for $31.2 million at an average price of $11.84.

The following table includes information with respect to repurchases we made of our common stock during the quarter ended December 31, 2011 (in thousands except per share price):

We satisfy the minimum withholding tax obligation due upon the vesting and the conversion of restricted stock units into shares of our common stock, by automatically withholding from the shares being issued a number of shares with an aggregate fair market value on the date of such vesting and conversion that would satisfy the withholding amount due.

18

Table of Contents

Statements in this Annual Report on Form 10-K which are not historical facts, so called “forward looking statements,” are made pursuant to the safe harbor provisions of Section 21E of the Securities Exchange Act of 1934, as amended. Investors are cautioned that all forward looking statements involve risks and uncertainties, including those detailed in Teradyne’s filings with the Securities and Exchange Commission. Readers are cautioned not to place undue reliance on these forward-looking statements which reflect management’s analysis only as of the date hereof. We assume no obligation to update these forward-looking statements to reflect actual results or changes in factors or assumptions affecting forward-looking statements, except as may be required by law.

19

Table of Contents

Overview

We are a leading global supplier of automatic test equipment. We design, develop, manufacture, and sell automatic test systems and solutions used to test complex electronics in the consumer electronics, automotive, computing, telecommunications, wireless, and aerospace and defense industries. Our automatic test equipment products and services include:

We have a broad customer base which includes integrated device manufacturers (“IDMs”), outsourced semiconductor assembly and test providers (“OSATs”), wafer foundries, fabless companies that design, but contract with others for the manufacture of integrated circuits (“ICs”), developers of wireless devices and consumer electronics, manufacturers of circuit boards, automotive companies, wireless product manufacturers, storage device manufacturers, aerospace and military contractors as well as the United States Department of Defense.

In 2011, we acquired LitePoint Corporation (“LitePoint”) to expand our product portfolio of test equipment in the wireless test sector. LitePoint designs, develops, and supports advanced wireless test solutions for the development and manufacturing of wireless devices, including smart phones, tablets, notebooks/laptops, personal computer peripherals, and other Wi-Fi enabled devices. LitePoint is our Wireless Test segment.

The sales of our products and services are dependent, to a large degree, on customers who are subject to cyclical trends in the demand for their products. These cyclical periods have had, and will continue to have, a significant effect on our business since our customers often delay or accelerate purchases in reaction to changes in their businesses and to demand fluctuations in the semiconductor industry. Historically, these demand fluctuations have resulted in significant variations in our results of operations. This was particularly relevant beginning in the fourth quarter of fiscal year 2008 where we saw a significant decrease in revenue in our Semiconductor Test business which was impacted by the deteriorating global economy, which negatively impacted the entire semiconductor industry. The sharp swings in the semiconductor industry in recent years have generally affected the semiconductor test equipment and services industry more significantly than the overall capital equipment sector.

We believe our acquisitions of Nextest, Eagle Test and LitePoint, and our entry into the high speed memory and storage test markets have enhanced our opportunities for growth. We will continue to invest in our business to expand further our addressable markets while tightly managing our costs.

We regularly face price competition in each of our businesses. More recently, we have been subject to greater price competition in the Semiconductor Test segment. We intend to respond to competitive pricing moves as necessary, which may adversely impact our gross margins. Longer term, we will continue to invest in engineering to lower the cost of test which should help mitigate the impacts from aggressive pricing actions.

On March 21, 2011, we completed the sale of our Diagnostic Solutions business unit, which was included in the Systems Test Group segment, to SPX Corporation for $40.2 million in cash. We sold this business as its growth potential as a stand-alone business was significantly less than if it was part of a larger automotive supplier. The financial information for Diagnostic Solutions has been reclassified to discontinued operations.

20

Table of Contents

Critical Accounting Policies and Estimates

We have identified the policies discussed below as critical to understanding our business and our results of operations and financial condition. The impact and any associated risks related to these policies on our business operations is discussed throughout Management’s Discussion and Analysis of Financial Condition and Results of Operations where such policies affect our reported and expected financial results.

Preparation of Financial Statements and Use of Estimates

The preparation of consolidated financial statements requires management to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues, and expenses and related disclosure of contingent liabilities. On an on-going basis, management evaluates its estimates, including those related to inventories, investments, goodwill, intangible and other long-lived assets, bad debts, income taxes, deferred tax assets, pensions, warranties, contingencies, and litigation. Management bases its estimates on historical experience and on appropriate and customary assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ significantly from these estimates.

Revenue Recognition

In October 2009, FASB amended the accounting standards for revenue recognition to remove tangible products containing non-software and software components that function together to deliver the product’s essential functionality from the scope of industry-specific software revenue recognition guidance. In October 2009, the FASB also amended the accounting standards for arrangements with multiple deliverables. We elected to early adopt this accounting guidance at the beginning of our first quarter of 2010 on a prospective basis. Adoption had no material impact on our financial position or results of operations in 2010 and 2011.

We recognize revenue when there is persuasive evidence of an arrangement, title and risk of loss have passed, delivery has occurred or the services have been rendered, the sales price is fixed or determinable and collection of the related receivable is reasonably assured. Title and risk of loss generally pass to our customers upon shipment or at delivery destination point. In circumstances where either title or risk of loss pass upon destination, acceptance or cash payment, we defer revenue recognition until such events occur.

Our equipment has non-software and software components that function together to deliver the equipment’s essential functionality. Revenue is recognized upon shipment or at delivery destination point, provided that customer acceptance criteria can be demonstrated prior to shipment. Certain contracts require us to perform tests of the product to ensure that performance meets the published product specifications or customer requested specifications, which are generally conducted prior to shipment. Where the criteria cannot be demonstrated prior to shipment, revenue is deferred until customer acceptance has been received. We also defer the portion of the sales price that is not due until acceptance, which represents deferred profit.

For multiple element arrangements, we allocate revenue to all deliverables based on their relative selling prices. In such circumstances, a hierarchy is used to determine the selling price for allocating revenue to deliverables as follows: (i) vendor-specific objective evidence of selling price (“VSOE”), (ii) third-party evidence of selling price (“TPE”), and (iii) best estimate of the selling price (“BESP”). For a delivered item to be considered a separate unit, the delivered item must have value to the customer on a standalone basis and the delivery or performance of the undelivered item must be considered probable and substantially in our control.

Our post-shipment obligations include installation, training services, one-year standard warranties, and extended warranties. Installation does not alter the product capabilities, does not require specialized skills or tools and can be performed by the customers or other vendors. Installation is typically provided within five days of product shipment and is completed within one to two days thereafter. Training services are optional and do not

21

Table of Contents

affect the customers’ ability to use the product. We defer revenue for the selling price of installation and training. Extended warranties constitute warranty obligations beyond one year and we defer revenue in accordance with Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) 605-20, “Separately Priced Extended Warranty and Product Maintenance Contracts.”

Our products are generally subject to warranty and related costs of the warranty are provided for in cost of revenue when product revenue is recognized. We classify shipping and handling costs in cost of revenue. Service revenue is recognized over the contractual period or as the services are performed.

We generally do not provide our customers with contractual rights of return for any of our products.

For transactions involving the sale of software, revenue is recognized in accordance with ASC 985-605, “Software Revenue Recognition.” We recognize revenue when there is persuasive evidence of an arrangement, delivery has occurred, the sales price is fixed or determinable and collectability is probable. In instances where an arrangement contains multiple elements, revenue related to the undelivered elements is deferred to the extent that vendor-specific objective evidence of fair value (“VSOE”) exists for such elements. In instances where VSOE does not exist for one or more of the undelivered elements of an arrangement, all revenue related to the arrangement is deferred until all elements have been delivered. VSOE is the price charged when the element is sold separately. Revenue for the separate elements is only recognized where the functionality of the undelivered element is not essential to the delivered element.

For certain contracts eligible for contract accounting under ASC 605-35, “Revenue Recognition Construction-Type and Production-Type Contracts,” revenue is recognized using the percentage-of-completion accounting method based upon the percentage of incurred costs to estimated total costs. These arrangements require significant production, modification, or customization. In all cases, changes to total estimated costs and anticipated losses, if any, are recognized in the period in which they are determined. With respect to contract change orders, claims or similar items, judgment must be used in estimating related amounts and assessing the potential for realization. Such amounts are only included in the contract value when they can be reliably estimated and realization is reasonably assured, generally upon receipt of a customer approved change order.

Inventories

Inventories, which include materials, labor, and manufacturing overhead, are stated at the lower of cost (first-in, first-out basis) or net realizable value. On a quarterly basis, we use consistent methodologies to evaluate all inventories for net realizable value. We record a provision for both excess and obsolete inventory when such write-downs or write-offs are identified through the quarterly review process. The inventory valuation is based upon assumptions about future demand, product mix, and possible alternative uses.

Equity Incentive and Stock Purchase Plans

Stock-based compensation expense is based on the grant-date fair value estimated in accordance with the provisions of ASC 718-10 “ Compensation—Stock Compensation ”. As required by ASC 718-10, we have made an estimate of expected forfeitures and are recognizing compensation costs only for those stock-based compensation awards expected to vest.

Income Taxes

On a quarterly basis, we evaluate the realizability of our deferred tax assets by jurisdiction and assess the need for a valuation allowance. We consider the probability of future taxable income and our historical profitability, among other factors, in assessing the amount of the valuation allowance. As a result of this review, undertaken at December 31, 2002, we concluded under applicable accounting criteria that it was more likely than not that our deferred tax assets would not be realized and established a valuation allowance in several jurisdictions, most notably the United States. At December 31, 2011, we reassessed this judgment and concluded

22

Table of Contents

that it is more likely than not that a substantial majority of our deferred tax assets will be realized through consideration of both the positive and negative evidence. The evidence consisted primarily of our three year U.S. historical cumulative profitability, projected future taxable income, forecasted utilization of the deferred tax assets and the fourth quarter of 2011 acquisition of LitePoint offset by the volatility of the industries we operate in, primarily the semiconductor industry. As such, we reduced the valuation allowance by $190.2 million, which was recorded as a tax benefit in the year ended December 31, 2011. We maintain a valuation allowance for certain deferred tax assets of $51.1 million, primarily related to excess stock compensation deductions associated with pre-2006 activity, state net operating losses and state tax credit carryforwards, due to uncertainty regarding their realization. Adjustments could be required in the future if we estimate that the amount of deferred tax assets to be realized is more or less than the net amount we have recorded.

Investments

We account for our investments in debt and equity securities in accordance with the provisions of ASC 320-10, “ Investments—Debt and Equity Securities. ” On a quarterly basis, we review our investments to identify and evaluate those that have an indication of a potential other-than-temporary impairment. Factors considered in determining whether a loss is other-than-temporary include:

Goodwill, Intangible and Long-Lived Assets

In September 2011, the FASB issued ASU No. 2011-08, “ Intangibles-Goodwill and Other (Topic 350): Testing Goodwill for Impairment. ” This new guidance is intended to simplify goodwill impairment testing by allowing companies to first assess qualitative factors to determine if it is more likely than not that goodwill might be impaired and whether it is necessary to perform the current two-step goodwill impairment test. We adopted this guidance in the fourth quarter of 2011 and determined that it is not more likely than not that the fair value of our reporting unit is less than its carrying value.

We assess the impairment of identifiable intangibles, long-lived assets, and goodwill whenever events or changes in circumstances indicate that the carrying value may not be recoverable. Factors we consider important in the determination of an impairment include significant underperformance relative to historical or projected future operating results, significant changes in the manner that we use the acquired asset and significant negative industry or economic trends. When we determine that the carrying value of intangibles and long-lived assets may not be recoverable based upon the existence of one or more of the above indicators of impairment, we measure any impairment based on a projected discounted cash flow method using a discount rate commensurate with the associated risks. We assess goodwill for impairment at least annually in the fourth quarter, on a reporting unit basis, or more frequently, when events and circumstances occur indicating that the recorded goodwill may be impaired. If the book value of a reporting unit exceeds its fair value, the implied fair value of goodwill is compared with the carrying amount of goodwill. If the carrying amount of goodwill exceeds the implied fair value, an impairment loss is recorded in an amount equal to that excess.

23

Table of Contents

SELECTED RELATIONSHIPS WITHIN THE CONSOLIDATED

Results of Operations

Book to Bill Ratio

Book to bill ratio is calculated as net bookings divided by net sales. Book to bill ratio by reportable segment was as follows:

24

Table of Contents

Revenues

Net revenues for our three reportable segments were as follows:

Semiconductor Test revenue decreased $307.1 million or approximately 22% from 2010 to 2011, due to a decrease in system-on-a-chip (“SOC”) product sales. Semiconductor Test product demand can fluctuate significantly from year to year based upon semiconductor device unit growth and installed base utilization. The 2011 decrease was due to lower volume from reduced demand.

Semiconductor Test revenue increased $860.9 million or approximately 156% from 2009 to 2010, due to a strong recovery in the semiconductor market, particularly in SOC test, and due to our strong market share in the higher growth Semiconductor Test segments such as power management, wireless and microcontroller.

The increase in Systems Test Group revenue of $141.6 million or approximately 93% from 2010 to 2011 was primarily due to the increase in sales of Storage Test systems, which was driven by new customers and new product applications.

The decrease in Systems Test Group revenue of $72.1 million or approximately 32% from 2009 to 2010 was primarily due to the decrease in sales of Storage Test systems and Mil/Aero systems and instruments, partially offset by an increase in Commercial Board Test sales.

The acquisition of LitePoint which was completed in October of 2011 added $28.4 million of revenue in 2011. Litepoint is our Wireless Test segment.

Our three reportable segments accounted for the following percentages of consolidated net revenue for each of the last three years:

Net revenue by region as a percentage of total revenue was as follows:

25

Table of Contents

The breakout of product and service revenue for the past three years was as follows:

Our product revenue decreased $170.8 million or 13% in 2011 from 2010 primarily due to lower sales of SOC Semiconductor Test products. Semiconductor Test product sales demand can fluctuate significantly from year to year based upon semiconductor device unit growth and installed base utilization. The 2011 decrease was due to lower volume from reduced demand. The decrease was partially offset by an increase in sales of Storage Test systems, which was driven by new customers and new product applications. The LitePoint acquisition which was completed in October of 2011 added $27.8 million of product revenue in 2011. Service revenue, which is derived from the servicing of our installed base of products and includes maintenance contracts, repairs, extended warranties, parts sales, and applications support, increased $33.7 million or 14% due to higher volume.

Our product revenue increased $754.5 million or 131% in 2010 from 2009 primarily due to higher sales across all Semiconductor Test products. The increase was partially offset by a decrease in sales of Storage Test systems and Mil/Aero systems and instruments. Service revenue increased $34.3 million or 17%, due to higher volume.

In fiscal year 2011 and 2010, no single customer accounted for more than 10% of our consolidated net revenue. In 2009, revenues from one customer accounted for 13% of our consolidated net revenue. In each of the years 2011, 2010 and 2009, our three largest customers in aggregate accounted for 19%, 21% and 27% of our consolidated net revenue, respectively.

Gross Profit

Gross profit as a percentage of revenue decreased from 2010 to 2011 by 4.8 percentage points. This decrease was the result of a decrease of 2.9 points related to product mix primarily from higher Storage Test system sales, a decrease of 0.9 points for a charge to adjust LitePoint acquired inventory to fair value, a decrease of 0.5 points due to lower volume, and a decrease of 0.3 points due to higher inventory provisions.

Gross profit as a percentage of revenue increased from 2009 to 2010 by 16.2 percentage points. This increase in gross profit was the result of an increase of 8.9 points due to higher product sales volume, an increase of 6.6 points related to product mix and an increase of 1.8 points due to lower inventory provisions. These increases were partially offset by a decrease of 1.2 points primarily due to higher variable compensation.

26

Table of Contents

The breakout of product and service gross profit was as follows:

We assess the carrying value of our inventory on a quarterly basis by estimating future demand and comparing that demand against on-hand and on-order inventory positions. Forecasted revenue information is obtained from the sales and marketing groups and incorporates factors such as backlog and future revenue demand. This quarterly process identifies obsolete and excess inventory. Obsolete inventory, which represents items for which there is no demand, is fully reserved. Excess inventory, which represents inventory items that are not expected to be consumed during the next four quarters, is written-down to estimated net realizable value.

During the year ended December 31, 2011, we recorded an inventory provision of $11.6 million included in cost of revenues, due to the downward revisions to previously forecasted demand levels. Of the $11.6 million of total excess and obsolete provisions recorded in 2011, $10.4 million was related to Semiconductor Test primarily due to product transition, $1.1 million was related to Systems Test Group, and $0.1 million was related to Wireless Test.

During the year ended December 31, 2010, we recorded an inventory provision of $6.0 million included in cost of revenues, due to the downward revisions to previously forecasted demand levels. Of the $6.0 million of total excess and obsolete provisions recorded in 2010, $4.5 million was related to Semiconductor Test and $1.5 million was related to Systems Test Group.

During the year ended December 31, 2009, we recorded an inventory provision of $24.8 million included in cost of revenues, due to the following factors:

Of the $24.8 million of total excess and obsolete provisions recorded in 2009, $20.3 million was related to Semiconductor Test and $4.5 million was related to Systems Test Group.

During the year ended December 31, 2011, 2010 and 2009, we scrapped $9.2 million, $4.7 million and $29.6 million of inventory, respectively, and sold $8.1 million, $8.3 million and $4.3 million of previously written-down or written-off inventory, respectively. As of December 31, 2011, we had inventory related reserves for amounts which had been written-down or written-off totaling $123.5 million. We have no pre-determined timeline to scrap the remaining inventory.

27

Table of Contents

Engineering and Development

Engineering and development expenses were as follows:

The increase of $2.6 million in engineering and development expenses from 2010 to 2011 was due primarily to additional costs of $6.0 million related to the acquisition of LitePoint in October 2011, partially offset by lower variable compensation.

The increase of $31.7 million in engineering and development expenses from 2009 to 2010 was due primarily to an $18.6 million increase in variable compensation and $6.2 million increase from the restoration of temporary salary reductions.

Selling and Administrative

Selling and administrative expenses were as follows:

The increase of $6.9 million in selling and administrative expenses from 2010 to 2011 was due primarily to additional costs of $9.7 million related to the acquisition of LitePoint in October 2011, partially offset by lower variable compensation.

The increase of $31.4 million in selling and administrative expenses from 2009 to 2010 was due primarily to a $25.1 million increase in variable compensation and $9.9 million from the restoration of temporary salary reductions, partially offset by a $5.3 million decrease in other spending related to workforce reductions and other cost reduction initiatives taken in 2009.

Acquired Intangible Assets Amortization

Acquired intangible assets amortization expense was as follows: